Guide to the Secure Configuration of Red Hat Enterprise Linux 9

with profile DISA STIG for Red Hat Enterprise Linux 9
This profile contains configuration checks that align to the DISA STIG for Red Hat Enterprise Linux 9 V1R1. In addition to being applicable to Red Hat Enterprise Linux 9, DISA recognizes this configuration baseline as applicable to the operating system tier of Red Hat technologies that are based on Red Hat Enterprise Linux 9, such as: - Red Hat Enterprise Linux Server - Red Hat Enterprise Linux Workstation and Desktop - Red Hat Enterprise Linux for HPC - Red Hat Storage - Red Hat Containers with a Red Hat Enterprise Linux 9 image
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 9. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Evaluation Characteristics

Evaluation targetlocalhost
Benchmark URL#scap_org.open-scap_comp_ssg-rhel9-xccdf.xml
Benchmark IDxccdf_org.ssgproject.content_benchmark_RHEL-9
Benchmark version0.1.69
Profile IDxccdf_org.ssgproject.content_profile_stig
Started at2024-01-08T16:20:24+00:00
Finished at2024-01-08T16:20:43+00:00
Performed bycore
Test systemcpe:/a:redhat:openscap:1.3.8

CPE Platforms

  • cpe:/o:redhat:enterprise_linux:9

Addresses

  • IPv4  127.0.0.1
  • IPv4  192.168.122.27
  • IPv6  0:0:0:0:0:0:0:1
  • IPv6  fe80:0:0:0:5054:ff:fe2e:2846
  • MAC  00:00:00:00:00:00
  • MAC  52:54:00:2E:28:46

Compliance and Scoring

The target system did not satisfy the conditions of 232 rules! Please review rule results and consider applying remediation.

Rule results

207 passed
232 failed
11 other

Severity of failed rules

3 other
20 low
202 medium
7 high

Score

Scoring systemScoreMaximumPercent
urn:xccdf:scoring:default70.407631100.000000
70.41%

Rule Overview

Group rules by:
TitleSeverityResult
Guide to the Secure Configuration of Red Hat Enterprise Linux 9 232x fail 11x notchecked
System Settings 204x fail 10x notchecked
Installing and Maintaining Software 17x fail 2x notchecked
System and Software Integrity 10x fail
Software Integrity Checking 6x fail
Verify Integrity with AIDE 6x fail
Install AIDEmedium
pass
Configure AIDE to Verify the Audit Toolsmedium
fail
Configure Periodic Execution of AIDEmedium
fail
Configure Notification of Post-AIDE Scan Detailsmedium
fail
Configure AIDE to Use FIPS 140-2 for Validating Hashesmedium
fail
Configure AIDE to Verify Access Control Lists (ACLs)low
fail
Configure AIDE to Verify Extended Attributeslow
fail
Audit Tools Must Be Group-owned by Rootmedium
pass
Audit Tools Must Be Owned by Rootmedium
pass
Audit Tools Must Have a Mode of 0755 or Less Permissivemedium
pass
Federal Information Processing Standard (FIPS)
Enable Dracut FIPS Modulehigh
pass
Enable FIPS Modehigh
pass
Set kernel parameter 'crypto.fips_enabled' to 1high
pass
System Cryptographic Policies 2x fail
Install crypto-policies packagemedium
pass
Configure BIND to use System Crypto Policyhigh
pass
Configure System Cryptography Policyhigh
pass
Configure Kerberos to use System Crypto Policyhigh
pass
Configure Libreswan to use System Crypto Policyhigh
pass
Configure OpenSSL library to use System Crypto Policymedium
pass
Configure OpenSSL library to use TLS Encryptionmedium
pass
Configure SSH to use System Crypto Policymedium
pass
Configure SSH Client to Use FIPS 140-2 Validated Ciphers: openssh.confighigh
fail
Configure SSH Server to Use FIPS 140-2 Validated Ciphers: opensshserver.configmedium
fail
Operating System Vendor Support and Certification
The Installed Operating System Is Vendor Supportedhigh
pass
Endpoint Protection Software 2x fail
McAfee Endpoint Security Software 2x fail
McAfee Endpoint Security for Linux (ENSL) 2x fail
Install McAfee Endpoint Security for Linux (ENSL)medium
fail
Ensure McAfee Endpoint Security for Linux (ENSL) is runningmedium
fail
Disk Partitioning 5x fail 1x notchecked
Encrypt Partitionshigh
notchecked
Ensure /home Located On Separate Partitionlow
fail
Ensure /tmp Located On Separate Partitionlow
fail
Ensure /var Located On Separate Partitionlow
pass
Ensure /var/log Located On Separate Partitionlow
fail
Ensure /var/log/audit Located On Separate Partitionlow
fail
Ensure /var/tmp Located On Separate Partitionmedium
fail
GNOME Desktop Environment
Disable the GNOME3 Login Restart and Shutdown Buttonshigh
notapplicable
Disable the GNOME3 Login User Listmedium
notapplicable
Enable the GNOME3 Screen Locking On Smartcard Removalmedium
notapplicable
GNOME Media Settings
Disable GNOME3 Automount Openingmedium
notapplicable
Disable GNOME3 Automount runninglow
notapplicable
Configure GNOME Screen Locking
Set GNOME3 Screensaver Inactivity Timeoutmedium
notapplicable
Set GNOME3 Screensaver Lock Delay After Activation Periodmedium
notapplicable
Enable GNOME3 Screensaver Lock After Idle Periodmedium
notapplicable
Implement Blank Screensavermedium
notapplicable
Ensure Users Cannot Change GNOME3 Screensaver Settingsmedium
notapplicable
Ensure Users Cannot Change GNOME3 Session Idle Settingsmedium
notapplicable
GNOME System Settings
Disable Ctrl-Alt-Del Reboot Key Sequence in GNOME3high
notapplicable
Make sure that the dconf databases are up-to-date with regards to respective keyfileshigh
notapplicable
Sudo 2x fail
Install sudo Packagemedium
pass
Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticatemedium
pass
Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWDmedium
pass
Require Re-Authentication When Using the sudo Commandmedium
fail
The operating system must restrict privilege elevation to authorized personnelmedium
pass
Ensure invoking users password for privilege escalation when using sudomedium
fail
System Tooling / Utilities
Ensure gnutls-utils is installedmedium
pass
Ensure nss-tools is installedmedium
pass
Install rng-tools Packagelow
pass
Install subscription-manager Packagemedium
pass
Uninstall gssproxy Packagemedium
pass
Uninstall iprutils Packagemedium
pass
Uninstall tuned Packagemedium
pass
Updating Software 1x notchecked
Ensure dnf Removes Previous Package Versionslow
notapplicable
Ensure gpgcheck Enabled In Main dnf Configurationhigh
notapplicable
Ensure gpgcheck Enabled for Local Packageshigh
notapplicable
Ensure gpgcheck Enabled for All dnf Package Repositorieshigh
pass
Ensure Red Hat GPG Key Installedhigh
pass
Ensure Software Patches Installed () medium
notchecked
Account and Access Control 48x fail 4x notchecked
Warning Banners for System Accesses 1x fail
Enable GNOME3 Login Warning Bannermedium
notapplicable
Modify the System Login Bannermedium
fail
Protect Accounts by Configuring PAM 20x fail 2x notchecked
Set Lockouts for Failed Password Attempts 8x fail 2x notchecked
Limit Password Reuse: password-authmedium
fail
Limit Password Reuse: system-authmedium
fail
Account Lockouts Must Be Loggedmedium
fail
Lock Accounts After Failed Password Attemptsmedium
fail
Configure the root Account for Failed Password Attemptsmedium
fail
Lock Accounts Must Persistmedium
fail
Set Interval For Counting Failed Password Attemptsmedium
fail
Set Lockout Time for Failed Password Attemptsmedium
fail
Set Password Quality Requirements 11x fail
Set Password Quality Requirements with pam_pwquality 11x fail
Ensure PAM Enforces Password Requirements - Minimum Digit Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Prevent the Use of Dictionary Wordsmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Different Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Enforce for root Usermedium
fail
Ensure PAM Enforces Password Requirements - Minimum Lowercase Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating Characters from Same Character Classmedium
fail
Set Password Maximum Consecutive Repeating Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Different Categoriesmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Lengthmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Special Charactersmedium
fail
Ensure PAM password complexity module is enabled in password-authmedium
pass
Ensure PAM password complexity module is enabled in system-authmedium
pass
Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Sessionmedium
pass
Ensure PAM Enforces Password Requirements - Minimum Uppercase Charactersmedium
fail
Set Password Hashing Algorithm
Set Password Hashing Algorithm in /etc/libuser.confmedium
pass
Set Password Hashing Algorithm in /etc/login.defsmedium
pass
Set PAM''s Password Hashing Algorithm - password-authmedium
pass
Set Password Hashing Rounds in /etc/login.defsmedium
pass
Disallow Configuration to Bypass Password Requirements for Privilege Escalationmedium
pass
Ensure PAM Displays Last Logon/Access Notificationlow
fail
Protect Physical Console Access 9x fail
Configure Screen Locking 5x fail
Configure Console Screen Locking 4x fail
Install the tmux Packagemedium
pass
Support session locking with tmuxmedium
fail
Configure tmux to lock session after inactivitymedium
fail
Configure the tmux Lock Commandmedium
fail
Prevent user from disabling the screen locklow
fail
Install the opensc Package For Multifactor Authenticationmedium
pass
Install the pcsc-lite packagemedium
pass
Install Smart Card Packages For Multifactor Authenticationmedium
pass
Enable the pcscd Servicemedium
pass
Configure opensc Smart Card Driversmedium
fail
Disable debug-shell SystemD Servicemedium
fail
Disable Ctrl-Alt-Del Burst Actionhigh
fail
Disable Ctrl-Alt-Del Reboot Activationhigh
fail
Verify that Interactive Boot is Disabledmedium
pass
Configure Logind to terminate idle sessions after certain time of inactivitymedium
fail
Require Authentication for Emergency Systemd Targetmedium
pass
Require Authentication for Single User Modemedium
pass
Protect Accounts by Restricting Password-Based Login 9x fail 1x notchecked
Set Account Expiration Following Inactivitymedium
fail
Set Password Expiration Parameters 5x fail
Set Password Maximum Agemedium
fail
Set Password Minimum Agemedium
fail
Set Password Minimum Length in login.defsmedium
fail
Set Existing Passwords Maximum Agemedium
fail
Set Existing Passwords Minimum Agemedium
fail
Verify Proper Storage and Existence of Password Hashes 1x fail
Verify All Account Password Hashes are Shadowed with SHA512medium
pass
Set number of Password Hashing Rounds - password-authmedium
pass
Set number of Password Hashing Rounds - system-authmedium
pass
All GIDs referenced in /etc/passwd must be defined in /etc/grouplow
pass
Prevent Login to Accounts With Empty Passwordhigh
fail
Ensure There Are No Accounts With Blank or Null Passwordshigh
pass
Restrict Root Logins 1x fail
Verify Only Root Has UID 0high
pass
Ensure that System Accounts Do Not Run a Shell Upon Loginmedium
pass
Enforce usage of pam_wheel for su authenticationmedium
fail
Only Authorized Local User Accounts Exist on Operating Systemmedium
fail
Ensure All Groups on the System Have Unique Group IDmedium
pass
Secure Session Configuration Files for Login Accounts 8x fail 1x notchecked
Ensure that Users Have Sensible Umask Values 4x fail
Ensure the Default Bash Umask is Set Correctlymedium
fail
Ensure the Default C Shell Umask is Set Correctlymedium
fail
Ensure the Default Umask is Set Correctly in login.defsmedium
fail
Ensure the Default Umask is Set Correctly in /etc/profilemedium
fail
Ensure the Default Umask is Set Correctly For Interactive Usersmedium
pass
Ensure the Logon Failure Delay is Set Correctly in login.defsmedium
fail
Limit the Number of Concurrent Login Sessions Allowed Per Userlow
fail
Set Interactive Session Timeoutmedium
fail
User Initialization Files Must Not Run World-Writable Programsmedium
pass
Ensure that Users Path Contains Only Local Directoriesmedium
notchecked
All Interactive Users Must Have A Home Directory Definedmedium
pass
All Interactive Users Home Directories Must Existmedium
pass
All Interactive User Home Directories Must Be Group-Owned By The Primary Groupmedium
pass
Ensure All User Initialization Files Have Mode 0740 Or Less Permissivemedium
fail
All Interactive User Home Directories Must Have mode 0750 Or Less Permissivemedium
pass
Enable authselectmedium
fail
System Accounting with auditd 83x fail 1x notchecked
Configure auditd Rules for Comprehensive Auditing 73x fail
Record Events that Modify the System's Discretionary Access Controls 15x fail
Record Events that Modify the System's Discretionary Access Controls - chmodmedium
fail
Record Events that Modify the System's Discretionary Access Controls - chownmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fchmodmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fchmodatmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fchownmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fchownatmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fremovexattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - fsetxattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - lchownmedium
fail
Record Events that Modify the System's Discretionary Access Controls - lremovexattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - lsetxattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - removexattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - setxattrmedium
fail
Record Events that Modify the System's Discretionary Access Controls - umountmedium
fail
Record Events that Modify the System's Discretionary Access Controls - umount2medium
fail
Record Execution Attempts to Run ACL Privileged Commands 2x fail
Record Any Attempts to Run chaclmedium
fail
Record Any Attempts to Run setfaclmedium
fail
Record Execution Attempts to Run SELinux Privileged Commands 4x fail
Record Any Attempts to Run chconmedium
fail
Record Any Attempts to Run semanagemedium
fail
Record Any Attempts to Run setfilesmedium
fail
Record Any Attempts to Run setseboolmedium
fail
Record File Deletion Events by User 5x fail
Ensure auditd Collects File Deletion Events by User - renamemedium
fail
Ensure auditd Collects File Deletion Events by User - renameatmedium
fail
Ensure auditd Collects File Deletion Events by User - rmdirmedium
fail
Ensure auditd Collects File Deletion Events by User - unlinkmedium
fail
Ensure auditd Collects File Deletion Events by User - unlinkatmedium
fail
Record Unauthorized Access Attempts Events to Files (unsuccessful) 6x fail
Record Unsuccessful Access Attempts to Files - creatmedium
fail
Record Unsuccessful Access Attempts to Files - ftruncatemedium
fail
Record Unsuccessful Access Attempts to Files - openmedium
fail
Record Unsuccessful Access Attempts to Files - open_by_handle_atmedium
fail
Record Unsuccessful Access Attempts to Files - openatmedium
fail
Record Unsuccessful Access Attempts to Files - truncatemedium
fail
Record Information on Kernel Modules Loading and Unloading 3x fail
Ensure auditd Collects Information on Kernel Module Unloading - delete_modulemedium
fail
Ensure auditd Collects Information on Kernel Module Loading and Unloading - finit_modulemedium
fail
Ensure auditd Collects Information on Kernel Module Loading - init_modulemedium
fail
Record Attempts to Alter Logon and Logout Events - faillockmedium
fail
Record Attempts to Alter Logon and Logout Events - lastlogmedium
fail
Record Attempts to Alter Logon and Logout Events - tallylogmedium
fail
Record Information on the Use of Privileged Commands 25x fail
Ensure auditd Collects Information on the Use of Privileged Commands - initmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - poweroffmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - rebootmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - shutdownmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - chagemedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - chshmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - crontabmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - gpasswdmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - kmodmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - mountmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - newgrpmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - pam_timestamp_checkmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - passwdmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - postdropmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - postqueuemedium
fail
Record Any Attempts to Run ssh-agentmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - ssh-keysignmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - sumedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - sudomedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - sudoeditmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - umountmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - unix_chkpwdmedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - unix_updatemedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - userhelpermedium
fail
Ensure auditd Collects Information on the Use of Privileged Commands - usermodmedium
fail
Make the auditd Configuration Immutablemedium
fail
Ensure auditd Collects System Administrator Actions - /etc/sudoersmedium
fail
Ensure auditd Collects System Administrator Actions - /etc/sudoers.d/medium
fail
Record Events When Privileged Executables Are Runmedium
fail
Shutdown System When Auditing Failures Occurmedium
fail
Record Events that Modify User/Group Information - /etc/groupmedium
fail
Record Events that Modify User/Group Information - /etc/gshadowmedium
fail
Record Events that Modify User/Group Information - /etc/security/opasswdmedium
fail
Record Events that Modify User/Group Information - /etc/passwdmedium
fail
Record Events that Modify User/Group Information - /etc/shadowmedium
fail
System Audit Directories Must Be Group Owned By Rootmedium
pass
System Audit Directories Must Be Owned By Rootmedium
pass
System Audit Logs Must Have Mode 0640 or Less Permissivemedium
pass
Configure auditd Data Retention 8x fail 1x notchecked
Configure a Sufficiently Large Partition for Audit Logsmedium
notchecked
Configure auditd to use audispd's syslog pluginmedium
fail
Configure auditd Disk Error Action on Disk Errormedium
fail
Configure auditd Disk Full Action when Disk Space Is Fullmedium
fail
Configure auditd mail_acct Action on Low Disk Spacemedium
pass
Configure auditd admin_space_left Action on Low Disk Spacemedium
fail
Configure auditd admin_space_left on Low Disk Spacemedium
fail
Configure auditd max_log_file_action Upon Reaching Maximum Log Sizemedium
pass
Configure auditd space_left Action on Low Disk Spacemedium
fail
Configure auditd space_left on Low Disk Spacemedium
fail
Set number of records to cause an explicit flush to audit logsmedium
pass
Include Local Events in Audit Logsmedium
pass
Resolve information before writing to audit logslow
pass
Set type of computer node name logging in audit logsmedium
fail
Appropriate Action Must be Setup When the Internal Audit Event Queue is Fullmedium
pass
Write Audit Logs to the Diskmedium
pass
Install audispd-plugins Packagemedium
pass
Ensure the audit Subsystem is Installedmedium
pass
Enable auditd Servicemedium
pass
Enable Auditing for Processes Which Start Prior to the Audit Daemonlow
fail
Extend Audit Backlog Limit for the Audit Daemonlow
fail
GRUB2 bootloader configuration 4x fail
Non-UEFI GRUB2 bootloader configuration 2x fail
Verify /boot/grub2/grub.cfg Group Ownershipmedium
pass
Verify /boot/grub2/grub.cfg User Ownershipmedium
pass
Set the Boot Loader Admin Username to a Non-Default Valuehigh
fail
Set Boot Loader Password in grub2high
fail
Enable Kernel Page-Table Isolation (KPTI)low
fail
Disable vsyscallsmedium
fail
Configure Syslog 5x fail
Ensure Proper Configuration of Log Files 4x fail
Ensure cron Is Logging To Rsyslogmedium
pass
Ensure Rsyslog Authenticates Off-Loaded Audit Recordsmedium
fail
Ensure Rsyslog Encrypts Off-Loaded Audit Recordsmedium
fail
Ensure Rsyslog Encrypts Off-Loaded Audit Recordsmedium
fail
Ensure remote access methods are monitored in Rsyslogmedium
fail
systemd-journald
Enable systemd-journald Servicemedium
pass
Configure rsyslogd to Accept Remote Messages If Acting as a Log Server
Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Servermedium
pass
Rsyslog Logs Sent To Remote Host 1x fail
Ensure Logs Sent To Remote Hostmedium
fail
Ensure rsyslog-gnutls is installedmedium
pass
Ensure rsyslog is Installedmedium
pass
Enable rsyslog Servicemedium
pass
Network Configuration and Firewalls 22x fail 3x notchecked
firewalld 2x notchecked
Inspect and Activate Default firewalld Rules
Install firewalld Packagemedium
pass
Verify firewalld Enabledmedium
pass
Strengthen the Default Ruleset 2x notchecked
Configure the Firewalld Portsmedium
notchecked
Firewalld Must Employ a Deny-all, Allow-by-exception Policy for Allowing Connections to Other Systemsmedium
notchecked
Configure Firewalld to Use the Nftables Backendmedium
pass
IPSec Support 1x notchecked
Install libreswan Packagemedium
pass
Verify Any Configured IPSec Tunnel Connectionsmedium
notchecked
IPv6 5x fail
Configure IPv6 Settings if Necessary 5x fail
Configure Accepting Router Advertisements on All IPv6 Interfacesmedium
fail
Disable Accepting ICMP Redirects for All IPv6 Interfacesmedium
pass
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfacesmedium
fail
Disable Kernel Parameter for IPv6 Forwardingmedium
fail
Disable Accepting Router Advertisements on all IPv6 Interfaces by Defaultmedium
fail
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfacesmedium
pass
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Defaultmedium
fail
Kernel Parameters Which Affect Networking 9x fail
Network Related Kernel Runtime Parameters for Hosts and Routers 9x fail
Disable Accepting ICMP Redirects for All IPv4 Interfacesmedium
pass
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfacesmedium
fail
Disable Kernel Parameter for IPv4 Forwarding on all IPv4 Interfacesmedium
fail
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfacesunknown
fail
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfacesmedium
pass
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Defaultmedium
pass
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Defaultunknown
fail
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Defaultmedium
fail
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfacesmedium
fail
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfacesunknown
fail
Enable Kernel Parameter to Use TCP Syncookies on Network Interfacesmedium
fail
Network Parameters for Hosts Only
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfacesmedium
pass
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Defaultmedium
pass
Uncommon Network Protocols 5x fail
Disable ATM Supportmedium
fail
Disable CAN Supportmedium
fail
Disable IEEE 1394 (FireWire) Supportlow
fail
Disable SCTP Supportmedium
fail
Disable TIPC Supportlow
fail
Wireless Networking 1x fail
Disable Wireless Through Software Configuration 1x fail
Disable Bluetooth Kernel Modulemedium
fail
Deactivate Wireless Network Interfacesmedium
notapplicable
Network Manager 1x fail
NetworkManager DNS Mode Must Be Must Configuredmedium
fail
Configure Multiple DNS Servers in /etc/resolv.confmedium
fail
Ensure System is Not Acting as a Network Sniffermedium
pass
File Permissions and Masks 25x fail
Verify Permissions on Important Files and Directories 1x fail
Verify Group Who Owns Backup group Filemedium
pass
Verify Group Who Owns Backup gshadow Filemedium
pass
Verify Group Who Owns Backup passwd Filemedium
pass
Verify User Who Owns Backup shadow Filemedium
pass
Verify Group Who Owns group Filemedium
pass
Verify Group Who Owns gshadow Filemedium
pass
Verify Group Who Owns passwd Filemedium
pass
Verify Group Who Owns shadow Filemedium
pass
Verify User Who Owns Backup group Filemedium
pass
Verify User Who Owns Backup gshadow Filemedium
pass
Verify User Who Owns Backup passwd Filemedium
pass
Verify Group Who Owns Backup shadow Filemedium
pass
Verify User Who Owns group Filemedium
pass
Verify User Who Owns gshadow Filemedium
pass
Verify User Who Owns passwd Filemedium
pass
Verify User Who Owns shadow Filemedium
pass
Verify Permissions on Backup group Filemedium
pass
Verify Permissions on Backup gshadow Filemedium
pass
Verify Permissions on Backup passwd Filemedium
pass
Verify Permissions on Backup shadow Filemedium
pass
Verify Permissions on group Filemedium
pass
Verify Permissions on gshadow Filemedium
pass
Verify Permissions on passwd Filemedium
pass
Verify Permissions on shadow Filemedium
pass
Verify Permissions on Files within /var/log Directory
Verify Group Who Owns /var/log Directorymedium
pass
Verify Group Who Owns /var/log/messages Filemedium
pass
Verify User Who Owns /var/log Directorymedium
pass
Verify User Who Owns /var/log/messages Filemedium
pass
Verify Permissions on /var/log Directorymedium
pass
Verify Permissions on /var/log/messages Filemedium
pass
Verify File Permissions Within Some Important Directories
Verify that Shared Library Directories Have Root Group Ownershipmedium
pass
Verify that Shared Library Directories Have Root Ownershipmedium
pass
Verify that Shared Library Directories Have Restrictive Permissionsmedium
pass
Verify that system commands files are group owned by root or a system accountmedium
pass
Verify that System Executables Have Root Ownershipmedium
pass
Verify that Shared Library Files Have Root Ownershipmedium
pass
Verify that System Executables Have Restrictive Permissionsmedium
pass
Verify that Shared Library Files Have Restrictive Permissionsmedium
pass
Verify the system-wide library files in directories "/lib", "/lib64", "/usr/lib/" and "/usr/lib64" are group-owned by root.medium
pass
Ensure All World-Writable Directories Are Owned by root Usermedium
pass
Verify that All World-Writable Directories Have Sticky Bits Setmedium
pass
Verify Permissions on /etc/audit/auditd.confmedium
pass
Verify Permissions on /etc/audit/rules.d/*.rulesmedium
pass
Ensure All Files Are Owned by a Groupmedium
fail
Ensure All Files Are Owned by a Usermedium
pass
Restrict Dynamic Mounting and Unmounting of Filesystems 2x fail
Disable the Automountermedium
pass
Disable Mounting of cramfslow
fail
Disable Modprobe Loading of USB Storage Drivermedium
fail
Restrict Partition Mount Options 7x fail
Add nosuid Option to /boot/efimedium
notapplicable
Add nodev Option to /bootmedium
fail
Add nosuid Option to /bootmedium
fail
Add nodev Option to /dev/shmmedium
fail
Add noexec Option to /dev/shmmedium
fail
Add nosuid Option to /dev/shmmedium
fail
Add nodev Option to /homeunknown
notapplicable
Add noexec Option to /homemedium
pass
Add nosuid Option to /homemedium
notapplicable
Add nodev Option to Non-Root Local Partitionsmedium
fail
Add nodev Option to Removable Media Partitionsmedium
pass
Add noexec Option to Removable Media Partitionsmedium
pass
Add nosuid Option to Removable Media Partitionsmedium
pass
Add nodev Option to /tmpmedium
notapplicable
Add noexec Option to /tmpmedium
notapplicable
Add nosuid Option to /tmpmedium
notapplicable
Add nodev Option to /var/log/auditmedium
notapplicable
Add noexec Option to /var/log/auditmedium
notapplicable
Add nosuid Option to /var/log/auditmedium
notapplicable
Add nodev Option to /var/logmedium
notapplicable
Add noexec Option to /var/logmedium
notapplicable
Add nosuid Option to /var/logmedium
notapplicable
Add nodev Option to /varmedium
fail
Add nodev Option to /var/tmpmedium
notapplicable
Add noexec Option to /var/tmpmedium
notapplicable
Add nosuid Option to /var/tmpmedium
notapplicable
Restrict Programs from Dangerous Execution Patterns 15x fail
Disable Core Dumps 4x fail
Disable acquiring, saving, and processing core dumpsmedium
fail
Disable core dump backtracesmedium
fail
Disable storing core dumpmedium
fail
Disable Core Dumps for All Usersmedium
fail
Enable ExecShield 1x fail
Enable ExecShield via sysctlmedium
pass
Restrict Exposed Kernel Pointer Addresses Accessmedium
pass
Enable Randomized Layout of Virtual Address Spacemedium
fail
Memory Poisoning 2x fail
Enable page allocator poisoningmedium
fail
Enable SLUB/SLAB allocator poisoningmedium
fail
Disable storing core dumpsmedium
fail
Restrict Access to Kernel Message Bufferlow
fail
Disable Kernel Image Loadingmedium
fail
Disallow kernel profiling by unprivileged userslow
fail
Disable Access to Network bpf() Syscall From Unprivileged Processesmedium
fail
Restrict usage of ptrace to descendant processesmedium
fail
Harden the operation of the BPF just-in-time compilermedium
fail
Disable the use of user namespacesmedium
fail
SELinux
Install policycoreutils-python-utils packagemedium
pass
Install policycoreutils Packagelow
pass
Ensure No Device Files are Unlabeled by SELinuxmedium
pass
Configure SELinux Policymedium
pass
Ensure SELinux State is Enforcinghigh
pass
Services 28x fail 1x notchecked
Base Services
Disable KDump Kernel Crash Analyzer (kdump)medium
pass
Cron and At Daemons
Verify Group Who Owns cron.dmedium
pass
Verify Group Who Owns cron.dailymedium
pass
Verify Group Who Owns cron.denymedium
pass
Verify Group Who Owns cron.hourlymedium
pass
Verify Group Who Owns cron.monthlymedium
pass
Verify Group Who Owns cron.weeklymedium
pass
Verify Group Who Owns Crontabmedium
pass
Verify Owner on cron.dmedium
pass
Verify Owner on cron.dailymedium
pass
Verify Owner on cron.denymedium
pass
Verify Owner on cron.hourlymedium
pass
Verify Owner on cron.monthlymedium
pass
Verify Owner on cron.weeklymedium
pass
Verify Owner on crontabmedium
pass
Verify Permissions on cron.dmedium
pass
Verify Permissions on cron.dailymedium
pass
Verify Permissions on cron.hourlymedium
pass
Verify Permissions on cron.monthlymedium
pass
Verify Permissions on cron.weeklymedium
pass
Verify Permissions on crontabmedium
pass
Application Whitelisting Daemon
Install fapolicyd Packagemedium
pass
Enable the File Access Policy Servicemedium
pass
FTP Server
Disable vsftpd if Possible
Uninstall vsftpd Packagehigh
pass
Kerberos
Disable Kerberos by removing host keytabmedium
notapplicable
Mail Server Software 1x fail
Configure SMTP For Mail Clients 1x fail
Configure System to Forward All Mail For The Root Accountmedium
fail
Configure System to Forward All Mail From Postmaster to The Root Accountmedium
pass
Configure Operating System to Protect Mail Server
Configure Postfix if Necessary
Control Mail Relaying
Prevent Unrestricted Mail Relayingmedium
notapplicable
The s-nail Package Is Installedmedium
pass
Uninstall Sendmail Packagemedium
pass
NFS and RPC
Configure NFS Clients
Mount Remote Filesystems with Restrictive Options
Mount Remote Filesystems with Kerberos Securitymedium
pass
Mount Remote Filesystems with nodevmedium
pass
Mount Remote Filesystems with noexecmedium
pass
Mount Remote Filesystems with nosuidmedium
pass
Uninstall nfs-utils Packagelow
pass
Network Time Protocol 4x fail
The Chrony package is installedmedium
pass
The Chronyd service is enabledmedium
pass
Disable chrony daemon from acting as serverlow
fail
Disable network management of chrony daemonlow
fail
Configure Time Service Maxpoll Intervalmedium
fail
Ensure Chrony is only configured with the server directivemedium
fail
Obsolete Services
NIS
Uninstall ypserv Packagehigh
pass
Rlogin, Rsh, and Rexec
Uninstall rsh-server Packagehigh
pass
Remove Host-Based Authentication Fileshigh
pass
Remove User Host-Based Authentication Fileshigh
pass
Telnet
Uninstall telnet-server Packagehigh
pass
TFTP Server
Uninstall tftp-server Packagehigh
pass
Ensure tftp Daemon Uses Secure Modemedium
notapplicable
Network Routing
Disable Quagga if Possible
Uninstall quagga Packagelow
pass
SSH Server 21x fail 1x notchecked
Configure OpenSSH Client if Necessary 1x notchecked
Verify the SSH Private Key Files Have a Passcodemedium
notchecked
Configure OpenSSH Server if Necessary 20x fail
Set SSH Client Alive Count Maxmedium
fail
Disable Host-Based Authenticationmedium
fail
Enable SSH Server firewalld Firewall Exceptionmedium
fail
Disable Compression Or Set Compression to delayedmedium
fail
Disable SSH Access via Empty Passwordshigh
fail
Disable GSSAPI Authenticationmedium
fail
Disable Kerberos Authenticationmedium
fail
Disable SSH Support for .rhosts Filesmedium
fail
Disable SSH Root Loginmedium
fail
Disable SSH Support for User Known Hostsmedium
fail
Disable X11 Forwardingmedium
fail
Do Not Allow SSH Environment Optionsmedium
fail
Enable PAMmedium
pass
Enable Public Key Authenticationmedium
fail
Enable Use of Strict Mode Checkingmedium
fail
Enable SSH Warning Bannermedium
fail
Enable SSH Print Last Logmedium
fail
Force frequent session key renegotiationmedium
fail
Set SSH Daemon LogLevel to VERBOSEmedium
fail
Enable Use of Privilege Separationmedium
fail
Prevent remote hosts from connecting to the proxy displaymedium
fail
Install OpenSSH client softwaremedium
pass
Install the OpenSSH Server Packagemedium
pass
Enable the OpenSSH Servicemedium
pass
Verify Group Who Owns SSH Server config filemedium
pass
Verify Owner on SSH Server config filemedium
pass
Verify Permissions on SSH Server config filemedium
pass
Verify Permissions on SSH Server Private *_key Key Filesmedium
fail
Verify Permissions on SSH Server Public *.pub Key Filesmedium
pass
System Security Services Daemon
Certificate status checking in SSSDmedium
notapplicable
Enable Certmap in SSSDmedium
notapplicable
Enable Smartcards in SSSDmedium
notapplicable
SSSD Has a Correct Trust Anchormedium
notapplicable
Configure SSSD to Expire Offline Credentialsmedium
notapplicable
USBGuard daemon 2x fail
Install usbguard Packagemedium
pass
Enable the USBGuard Servicemedium
pass
Log USBGuard daemon audit events using Linux Auditlow
fail
Generate USBGuard Policymedium
fail
X Window System
Disable X Windows
Disable graphical user interfacemedium
pass
Disable X Windows Startup By Setting Default Targetmedium
pass

Result Details

Install AIDExccdf_org.ssgproject.content_rule_package_aide_installed mediumCCE-90843-4

Install AIDE

Rule IDxccdf_org.ssgproject.content_rule_package_aide_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_aide_installed:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90843-4

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-002696, CCI-002699, CCI-001744, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, 1034, 1288, 1341, 1417, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000445-GPOS-00199, RHEL-09-651010, 1.3.1, SV-258134r926389_rule

Description
The aide package can be installed with the following command:
$ sudo dnf install aide
Rationale
The AIDE package must be installed if it is to be available for integrity checking.
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64
Configure AIDE to Verify the Audit Toolsxccdf_org.ssgproject.content_rule_aide_check_audit_tools mediumCCE-87757-1

Configure AIDE to Verify the Audit Tools

Rule IDxccdf_org.ssgproject.content_rule_aide_check_audit_tools
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_check_audit_tools:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87757-1

References:  CCI-001496, AU-9(3), AU-9(3).1, SRG-OS-000278-GPOS-00108, RHEL-09-651025, 1.3.3, SV-258137r926398_rule

Description
The operating system file integrity tool must be configured to protect the integrity of the audit tools.
Rationale
Protecting the integrity of the tools used for auditing purposes is a critical step toward ensuring the integrity of audit information. Audit information includes all information (e.g., audit records, audit settings, and audit reports) needed to successfully audit information system activity. Audit tools include but are not limited to vendor-provided and open-source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. It is not uncommon for attackers to replace the audit tools or inject code into the existing tools to provide the capability to hide or erase system activity from the audit logs. To address this risk, audit tools must be cryptographically signed to provide the capability to identify when the audit tools have been modified, manipulated, or replaced. An example is a checksum hash of the file or files.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi










if grep -i '^.*/usr/sbin/auditctl.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/auditctl.*#/usr/sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/auditd.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/auditd.*#/usr/sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/ausearch.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/ausearch.*#/usr/sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/aureport.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/aureport.*#/usr/sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/autrace.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/autrace.*#/usr/sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/augenrules.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/augenrules.*#/usr/sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

if grep -i '^.*/usr/sbin/rsyslogd.*$' /etc/aide.conf; then
sed -i "s#.*/usr/sbin/rsyslogd.*#/usr/sbin/rsyslogd p+i+n+u+g+s+b+acl+xattrs+sha512#" /etc/aide.conf
else
echo "/usr/sbin/rsyslogd p+i+n+u+g+s+b+acl+xattrs+sha512" >> /etc/aide.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Ensure aide is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87757-1
  - DISA-STIG-RHEL-09-651025
  - NIST-800-53-AU-9(3)
  - NIST-800-53-AU-9(3).1
  - aide_check_audit_tools
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set audit_tools fact
  set_fact:
    audit_tools:
    - /usr/sbin/auditctl
    - /usr/sbin/auditd
    - /usr/sbin/augenrules
    - /usr/sbin/aureport
    - /usr/sbin/ausearch
    - /usr/sbin/autrace
    - /usr/sbin/rsyslogd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87757-1
  - DISA-STIG-RHEL-09-651025
  - NIST-800-53-AU-9(3)
  - NIST-800-53-AU-9(3).1
  - aide_check_audit_tools
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure existing AIDE configuration for audit tools are correct
  lineinfile:
    path: /etc/aide.conf
    regexp: ^{{ item }}\s
    line: '{{ item }} p+i+n+u+g+s+b+acl+xattrs+sha512'
  with_items: '{{ audit_tools }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87757-1
  - DISA-STIG-RHEL-09-651025
  - NIST-800-53-AU-9(3)
  - NIST-800-53-AU-9(3).1
  - aide_check_audit_tools
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure AIDE to properly protect audit tools
  lineinfile:
    path: /etc/aide.conf
    line: '{{ item }} p+i+n+u+g+s+b+acl+xattrs+sha512'
  with_items: '{{ audit_tools }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87757-1
  - DISA-STIG-RHEL-09-651025
  - NIST-800-53-AU-9(3)
  - NIST-800-53-AU-9(3).1
  - aide_check_audit_tools
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

auditctl is checked in /etc/aide.conf  oval:ssg-test_aide_verify_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^\/usr\/sbin\/auditctl\s+([^\n]+)$1

auditd is checked in /etc/aide.conf  oval:ssg-test_aide_verify_auditd:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_auditd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/auditd\s+([^\n]+)$1

ausearch is checked in /etc/aide.conf  oval:ssg-test_aide_verify_ausearch:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_ausearch:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/ausearch\s+([^\n]+)$1

aureport is checked in /etc/aide.conf  oval:ssg-test_aide_verify_aureport:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_aureport:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/aureport\s+([^\n]+)$1

autrace is checked in /etc/aide.conf  oval:ssg-test_aide_verify_autrace:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_autrace:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/autrace\s+([^\n]+)$1

rsyslogd is checked in /etc/aide.conf  oval:ssg-test_aide_verify_rsyslogd:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_rsyslogd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/rsyslogd\s+([^\n]+)$1

augenrules is checked in /etc/aide.conf  oval:ssg-test_aide_verify_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_verify_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aide.conf^/usr/sbin/augenrules\s+([^\n]+)$1
Configure Periodic Execution of AIDExccdf_org.ssgproject.content_rule_aide_periodic_cron_checking mediumCCE-83437-4

Configure Periodic Execution of AIDE

Rule IDxccdf_org.ssgproject.content_rule_aide_periodic_cron_checking
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_periodic_cron_checking:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83437-4

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-001744, CCI-002699, CCI-002702, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, SI-7, SI-7(1), CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201, RHEL-09-651015, 1.3.2, SV-258135r926392_rule

Description
At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * * root /usr/sbin/aide --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * 0 root /usr/sbin/aide --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.
Rationale
By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

if ! grep -q "/usr/sbin/aide --check" /etc/crontab ; then
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
else
    sed -i '\!^.* --check.*$!d' /etc/crontab
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83437-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - RedHat
  set_fact:
    cron_pkg_name: cronie
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "RedHat" or ansible_os_family == "Suse"
  tags:
  - CCE-83437-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - Debian
  set_fact:
    cron_pkg_name: cron
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "Debian"
  tags:
  - CCE-83437-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Install cron
  package:
    name: '{{ cron_pkg_name }}'
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83437-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/sbin/aide --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83437-4
  - CJIS-5.10.1.3
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

run aide with cron  oval:ssg-test_aide_periodic_cron_checking:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_aide_periodic_cron_checking:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/crontab^(([0-9]*[\s]*[0-9]*[\s]*\*[\s]*\*[\s]*(\*|([0-7]|mon|tue|wed|thu|fri|sat|sun)|[0-7]-[0-7]))|@(hourly|daily|weekly))[\s]*root[\s]*\/usr\/sbin\/aide[\s]*\-\-check.*$1

run aide with cron  oval:ssg-test_aide_crond_checking:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_aide_crond_checking:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/cron.d^.*$^(([0-9]*[\s]*[0-9]*[\s]*\*[\s]*\*[\s]*(\*|([0-7]|mon|tue|wed|thu|fri|sat|sun)|[0-7]-[0-7]))|@(hourly|daily|weekly))[\s]*root[\s]*\/usr\/sbin\/aide[\s]*\-\-check.*$1

run aide with cron  oval:ssg-test_aide_var_cron_checking:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_var_cron_checking:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/var/spool/cron/root^(([0-9]*[\s]*[0-9]*[\s]*\*[\s]*\*[\s]*(\*|([0-7]|mon|tue|wed|thu|fri|sat|sun)|[0-7]-[0-7]))|@(hourly|daily|weekly))[\s]*(root)?[\s]*\/usr\/sbin\/aide[\s]*\-\-check.*$1

run aide with cron.(daily|weekly)  oval:ssg-test_aide_crontabs_checking:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_crontabs_checking:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
^/etc/cron.(daily|weekly)$^.*$^[^#]*\/usr\/sbin\/aide\s+\-\-check\s*$1
Configure Notification of Post-AIDE Scan Detailsxccdf_org.ssgproject.content_rule_aide_scan_notification mediumCCE-90844-2

Configure Notification of Post-AIDE Scan Details

Rule IDxccdf_org.ssgproject.content_rule_aide_scan_notification
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_scan_notification:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90844-2

References:  BP28(R51), 1, 11, 12, 13, 15, 16, 2, 3, 5, 7, 8, 9, BAI01.06, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, CCI-001744, CCI-002699, CCI-002702, 4.3.4.3.2, 4.3.4.3.3, SR 6.2, SR 7.6, A.12.1.2, A.12.4.1, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, CM-6(a), CM-3(5), DE.CM-1, DE.CM-7, PR.IP-1, PR.IP-3, SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201, RHEL-09-651015, SV-258135r926392_rule

Description
AIDE should notify appropriate personnel of the details of a scan after the scan has been run. If AIDE has already been configured for periodic execution in /etc/crontab, append the following line to the existing AIDE line:
 | /bin/mail -s "$(hostname) - AIDE Integrity Check" root@localhost
Otherwise, add the following line to /etc/crontab:
05 4 * * * root /usr/sbin/aide --check | /bin/mail -s "$(hostname) - AIDE Integrity Check" root@localhost
AIDE can be executed periodically through other means; this is merely one example.
Rationale
Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi
var_aide_scan_notification_email='root@localhost'


CRONTAB=/etc/crontab
CRONDIRS='/etc/cron.d /etc/cron.daily /etc/cron.weekly /etc/cron.monthly'

# NOTE: on some platforms, /etc/crontab may not exist
if [ -f /etc/crontab ]; then
	CRONTAB_EXIST=/etc/crontab
fi

if [ -f /var/spool/cron/root ]; then
	VARSPOOL=/var/spool/cron/root
fi

if ! grep -qR '^.*/usr/sbin/aide\s*\-\-check.*|.*\/bin\/mail\s*-s\s*".*"\s*.*@.*$' $CRONTAB_EXIST $VARSPOOL $CRONDIRS; then
	echo "0 5 * * * root /usr/sbin/aide  --check | /bin/mail -s \"\$(hostname) - AIDE Integrity Check\" $var_aide_scan_notification_email" >> $CRONTAB
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_aide_scan_notification_email # promote to variable
  set_fact:
    var_aide_scan_notification_email: !!str root@localhost
  tags:
    - always

- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90844-2
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-3(5)
  - NIST-800-53-CM-6(a)
  - aide_scan_notification
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Notification of Post-AIDE Scan Details
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/sbin/aide  --check | /bin/mail -s "$(hostname) - AIDE Integrity Check"
      {{ var_aide_scan_notification_email }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90844-2
  - DISA-STIG-RHEL-09-651015
  - NIST-800-53-CM-3(5)
  - NIST-800-53-CM-6(a)
  - aide_scan_notification
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

notify personnel when aide completes  oval:ssg-test_aide_scan_notification:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_aide_scan_notification:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/crontab^.*/usr/sbin/aide[\s]*\-\-check.*\|.*/bin/mail[\s]*-s[\s]*".*"[\s]*.+@.+$1

notify personnel when aide completes  oval:ssg-test_aide_var_cron_notification:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_var_cron_notification:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/var/spool/cron/root^.*/usr/sbin/aide[\s]*\-\-check.*\|.*/bin/mail[\s]*-s[\s]*".*"[\s]*.+@.+$1

notify personnel when aide completes in cron.(daily|weekly|monthly)  oval:ssg-test_aide_crontabs_notification:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_aide_crontabs_notification:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
^/etc/cron.(d|daily|weekly|monthly)$^.*$^.*/usr/sbin/aide[\s]*\-\-check.*\|.*/bin/mail[\s]*-s[\s]*".*"[\s]*.+@.+$1
Configure AIDE to Use FIPS 140-2 for Validating Hashesxccdf_org.ssgproject.content_rule_aide_use_fips_hashes mediumCCE-88939-4

Configure AIDE to Use FIPS 140-2 for Validating Hashes

Rule IDxccdf_org.ssgproject.content_rule_aide_use_fips_hashes
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_use_fips_hashes:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88939-4

References:  2, 3, APO01.06, BAI03.05, BAI06.01, DSS06.02, 3.13.11, CCI-000366, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, A.11.2.4, A.12.2.1, A.12.5.1, A.14.1.2, A.14.1.3, A.14.2.4, SI-7, SI-7(1), CM-6(a), PR.DS-6, PR.DS-8, SRG-OS-000480-GPOS-00227, RHEL-09-651020, 1.3.2, SV-258136r926395_rule

Description
By default, the sha512 option is added to the NORMAL ruleset in AIDE. If using a custom ruleset or the sha512 option is missing, add sha512 to the appropriate ruleset. For example, add sha512 to the following line in /etc/aide.conf:
NORMAL = FIPSR+sha512
AIDE rules can be configured in multiple ways; this is merely one example that is already configured by default.
Rationale
File integrity tools use cryptographic hashes for verifying file contents and directories have not been altered. These hashes must be FIPS 140-2 approved cryptographic hashes.
Warnings
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

aide_conf="/etc/aide.conf"
forbidden_hashes=(sha1 rmd160 sha256 whirlpool tiger haval gost crc32)

groups=$(LC_ALL=C grep "^[A-Z][A-Za-z_]*" $aide_conf | cut -f1 -d ' ' | tr -d ' ' | sort -u)

for group in $groups
do
	config=$(grep "^$group\s*=" $aide_conf | cut -f2 -d '=' | tr -d ' ')

	if ! [[ $config = *sha512* ]]
	then
		config=$config"+sha512"
	fi

	for hash in "${forbidden_hashes[@]}"
	do
		config=$(echo $config | sed "s/$hash//")
	done

	config=$(echo $config | sed "s/^\+*//")
	config=$(echo $config | sed "s/\+\++/+/")
	config=$(echo $config | sed "s/\+$//")

	sed -i "s/^$group\s*=.*/$group = $config/g" $aide_conf
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
OVAL test results details

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_unix_family:obj:1 of type family_object

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_unix_family:obj:1 of type family_object

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8_unix_family:obj:1 of type family_object

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8:obj:1 of type rpminfo_object
Name
redhat-release

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8_unix_family:obj:1 of type family_object

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8:obj:1 of type rpminfo_object
Name
redhat-release

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

os-release is rhcos  oval:ssg-test_rhcos:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseID="rhel"

os-release is rhcos  oval:ssg-test_rhcos:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhcos:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^ID="(\w+)"$1

rhcoreos is version 4  oval:ssg-test_rhcos4:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseVERSION_ID="9.3"

rhcoreos is version 4  oval:ssg-test_rhcos4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhcos4:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)\.\d+"$1

os-release is rhcos  oval:ssg-test_rhcos:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseID="rhel"

os-release is rhcos  oval:ssg-test_rhcos:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhcos:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^ID="(\w+)"$1

rhcoreos is version 4  oval:ssg-test_rhcos4:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseVERSION_ID="9.3"

rhcoreos is version 4  oval:ssg-test_rhcos4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhcos4:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)\.\d+"$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_unix_family:obj:1 of type family_object

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_unix_family:obj:1 of type family_object

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_unix_family:obj:1 of type family_object

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_unix_family:obj:1 of type family_object

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_xenial:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_xenial:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=xenial$1

Check Ubuntu version  oval:ssg-test_ubuntu_xenial:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_xenial:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=xenial$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_xenial:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_xenial:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=xenial$1

Check Ubuntu version  oval:ssg-test_ubuntu_xenial:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_xenial:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=xenial$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_bionic:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_bionic:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=bionic$1

Check Ubuntu version  oval:ssg-test_ubuntu_bionic:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_bionic:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=bionic$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_bionic:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_bionic:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=bionic$1

Check Ubuntu version  oval:ssg-test_ubuntu_bionic:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_bionic:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=bionic$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_focal:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_focal:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=focal$1

Check Ubuntu version  oval:ssg-test_ubuntu_focal:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_focal:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=focal$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

/etc/lsb-release exists  oval:ssg-test_lsb:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_lsb:obj:1 of type file_object
Filepath
/etc/lsb-release

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu  oval:ssg-test_ubuntu:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_ID=Ubuntu$1

Check Ubuntu version  oval:ssg-test_ubuntu_focal:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_focal:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=focal$1

Check Ubuntu version  oval:ssg-test_ubuntu_focal:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ubuntu_focal:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/lsb-release^DISTRIB_CODENAME=focal$1

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

Verify non-FIPS hashes are not configured in /etc/aide.conf  oval:ssg-test_aide_non_fips_hashes:tst:1  false

Following items have been found on the system:
PathContent
/etc/aide.confALLXTRAHASHES = sha1+rmd160+sha256+sha512+tiger

Verify FIPS hashes are configured in /etc/aide.conf  oval:ssg-test_aide_use_fips_hashes:tst:1  false

Following items have been found on the system:
PathContent
/etc/aide.confALLXTRAHASHES = sha1+rmd160+sha256+sha512+tiger
/etc/aide.confEVERYTHING = R+ALLXTRAHASHES
/etc/aide.confNORMAL = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha512
/etc/aide.confDIR = p+i+n+u+g+acl+selinux+xattrs
/etc/aide.confPERMS = p+u+g+acl+selinux+xattrs
/etc/aide.confLOG = p+u+g+n+S+acl+selinux+xattrs
/etc/aide.confCONTENT = sha512+ftype
/etc/aide.confCONTENT_EX = sha512+ftype+p+u+g+n+acl+selinux+xattrs
/etc/aide.confDATAONLY = p+n+u+g+s+acl+selinux+xattrs+sha512
Configure AIDE to Verify Access Control Lists (ACLs)xccdf_org.ssgproject.content_rule_aide_verify_acls lowCCE-90837-6

Configure AIDE to Verify Access Control Lists (ACLs)

Rule IDxccdf_org.ssgproject.content_rule_aide_verify_acls
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_verify_acls:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-90837-6

References:  BP28(R51), 2, 3, APO01.06, BAI03.05, BAI06.01, DSS06.02, CCI-000366, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, A.11.2.4, A.12.2.1, A.12.5.1, A.14.1.2, A.14.1.3, A.14.2.4, SI-7, SI-7(1), CM-6(a), PR.DS-6, PR.DS-8, SRG-OS-000480-GPOS-00227, RHEL-09-651030, SV-258138r926401_rule

Description
By default, the acl option is added to the FIPSR ruleset in AIDE. If using a custom ruleset or the acl option is missing, add acl to the appropriate ruleset. For example, add acl to the following line in /etc/aide.conf:
FIPSR = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha256
AIDE rules can be configured in multiple ways; this is merely one example that is already configured by default. The remediation provided with this rule adds acl to all rule sets available in /etc/aide.conf
Rationale
ACLs can provide permissions beyond those permitted through the file mode and must be verified by the file integrity tools.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

aide_conf="/etc/aide.conf"

groups=$(LC_ALL=C grep "^[A-Z][A-Za-z_]*" $aide_conf | grep -v "^ALLXTRAHASHES" | cut -f1 -d '=' | tr -d ' ' | sort -u)

for group in $groups
do
	config=$(grep "^$group\s*=" $aide_conf | cut -f2 -d '=' | tr -d ' ')

	if ! [[ $config = *acl* ]]
	then
		if [[ -z $config ]]
		then
			config="acl"
		else
			config=$config"+acl"
		fi
	fi
	sed -i "s/^$group\s*=.*/$group = $config/g" $aide_conf
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather list of packages
  package_facts:
    manager: auto
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ''
  tags:
  - CCE-90837-6
  - DISA-STIG-RHEL-09-651030
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_acls
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

- name: Get rules groups
  shell: |
    set -o pipefail
    LC_ALL=C grep "^[A-Z][A-Za-z_]*" /etc/aide.conf | grep -v "^ALLXTRAHASHES" | cut -f1 -d '=' | tr -d ' ' | sort -u || true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '''aide'' in ansible_facts.packages'
  register: find_rules_groups_results
  tags:
  - CCE-90837-6
  - DISA-STIG-RHEL-09-651030
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_acls
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the acl rule is present when aide is installed.
  replace:
    path: /etc/aide.conf
    regexp: (^\s*{{ item }}\s*=\s*)(?!.*acl)([^\s]*)
    replace: \g<1>\g<2>+acl
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '''aide'' in ansible_facts.packages'
  with_items: '{{ find_rules_groups_results.stdout_lines | map(''trim'') | list }}'
  tags:
  - CCE-90837-6
  - DISA-STIG-RHEL-09-651030
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_acls
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

acl is set in /etc/aide.conf  oval:ssg-test_aide_verify_acls:tst:1  false

Following items have been found on the system:
PathContent
/etc/aide.confEVERYTHING = R+ALLXTRAHASHES
/etc/aide.confNORMAL = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha512
/etc/aide.confDIR = p+i+n+u+g+acl+selinux+xattrs
/etc/aide.confPERMS = p+u+g+acl+selinux+xattrs
/etc/aide.confLOG = p+u+g+n+S+acl+selinux+xattrs
/etc/aide.confCONTENT = sha512+ftype
/etc/aide.confCONTENT_EX = sha512+ftype+p+u+g+n+acl+selinux+xattrs
/etc/aide.confDATAONLY = p+n+u+g+s+acl+selinux+xattrs+sha512
Configure AIDE to Verify Extended Attributesxccdf_org.ssgproject.content_rule_aide_verify_ext_attributes lowCCE-83439-0

Configure AIDE to Verify Extended Attributes

Rule IDxccdf_org.ssgproject.content_rule_aide_verify_ext_attributes
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-aide_verify_ext_attributes:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83439-0

References:  BP28(R51), 2, 3, APO01.06, BAI03.05, BAI06.01, DSS06.02, CCI-000366, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, A.11.2.4, A.12.2.1, A.12.5.1, A.14.1.2, A.14.1.3, A.14.2.4, SI-7, SI-7(1), CM-6(a), PR.DS-6, PR.DS-8, SRG-OS-000480-GPOS-00227, RHEL-09-651035, SV-258139r926404_rule

Description
By default, the xattrs option is added to the FIPSR ruleset in AIDE. If using a custom ruleset or the xattrs option is missing, add xattrs to the appropriate ruleset. For example, add xattrs to the following line in /etc/aide.conf:
FIPSR = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha256
AIDE rules can be configured in multiple ways; this is merely one example that is already configured by default. The remediation provided with this rule adds xattrs to all rule sets available in /etc/aide.conf
Rationale
Extended attributes in file systems are used to contain arbitrary data and file metadata with security implications.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

aide_conf="/etc/aide.conf"

groups=$(LC_ALL=C grep "^[A-Z][A-Za-z_]*" $aide_conf | grep -v "^ALLXTRAHASHES" | cut -f1 -d '=' | tr -d ' ' | sort -u)

for group in $groups
do
	config=$(grep "^$group\s*=" $aide_conf | cut -f2 -d '=' | tr -d ' ')

	if ! [[ $config = *xattrs* ]]
	then
		if [[ -z $config ]]
		then
			config="xattrs"
		else
			config=$config"+xattrs"
		fi
	fi
	sed -i "s/^$group\s*=.*/$group = $config/g" $aide_conf
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather list of packages
  package_facts:
    manager: auto
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ''
  tags:
  - CCE-83439-0
  - DISA-STIG-RHEL-09-651035
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_ext_attributes
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

- name: Get rules groups
  shell: |
    set -o pipefail
    LC_ALL=C grep "^[A-Z][A-Za-z_]*" /etc/aide.conf | grep -v "^ALLXTRAHASHES" | cut -f1 -d '=' | tr -d ' ' | sort -u || true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '''aide'' in ansible_facts.packages'
  register: find_rules_groups_results
  tags:
  - CCE-83439-0
  - DISA-STIG-RHEL-09-651035
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_ext_attributes
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the xattrs rule is present when aide is installed.
  replace:
    path: /etc/aide.conf
    regexp: (^\s*{{ item }}\s*=\s*)(?!.*xattrs)([^\s]*)
    replace: \g<1>\g<2>+xattrs
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '''aide'' in ansible_facts.packages'
  with_items: '{{ find_rules_groups_results.stdout_lines | map(''trim'') | list }}'
  tags:
  - CCE-83439-0
  - DISA-STIG-RHEL-09-651035
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - aide_verify_ext_attributes
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

package aide is installed  oval:ssg-test_package_aide_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
aidex86_64(none)100.el90.160:0.16-100.el9199e2f91fd431d51aide-0:0.16-100.el9.x86_64

xattrs is set in /etc/aide.conf  oval:ssg-test_aide_verify_ext_attributes:tst:1  false

Following items have been found on the system:
PathContent
/etc/aide.confEVERYTHING = R+ALLXTRAHASHES
/etc/aide.confNORMAL = p+i+n+u+g+s+m+c+acl+selinux+xattrs+sha512
/etc/aide.confDIR = p+i+n+u+g+acl+selinux+xattrs
/etc/aide.confPERMS = p+u+g+acl+selinux+xattrs
/etc/aide.confLOG = p+u+g+n+S+acl+selinux+xattrs
/etc/aide.confCONTENT = sha512+ftype
/etc/aide.confCONTENT_EX = sha512+ftype+p+u+g+n+acl+selinux+xattrs
/etc/aide.confDATAONLY = p+n+u+g+s+acl+selinux+xattrs+sha512
Audit Tools Must Be Group-owned by Rootxccdf_org.ssgproject.content_rule_file_audit_tools_group_ownership mediumCCE-86240-9

Audit Tools Must Be Group-owned by Root

Rule IDxccdf_org.ssgproject.content_rule_file_audit_tools_group_ownership
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_audit_tools_group_ownership:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86240-9

References:  CCI-001493, CCI-001494, CCI-001495, AU-9, SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099, RHEL-09-232225, SV-257925r925762_rule

Description
Red Hat Enterprise Linux 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. Audit tools must have the correct group owner.
Rationale
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operations on audit information.
OVAL test results details

Testing group ownership of /sbin/auditctl  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_0:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditctloval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_0:ste:1

Testing group ownership of /sbin/aureport  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_1:obj:1 of type file_object
FilepathFilterFilter
/sbin/aureportoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_1:ste:1

Testing group ownership of /sbin/ausearch  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_2:obj:1 of type file_object
FilepathFilterFilter
/sbin/ausearchoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_2:ste:1

Testing group ownership of /sbin/autrace  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_3:obj:1 of type file_object
FilepathFilterFilter
/sbin/autraceoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_3:ste:1

Testing group ownership of /sbin/auditd  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_4:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_4:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditdoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_4:ste:1

Testing group ownership of /sbin/rsyslogd  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_5:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_5:obj:1 of type file_object
FilepathFilterFilter
/sbin/rsyslogdoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_5:ste:1

Testing group ownership of /sbin/augenrules  oval:ssg-test_file_groupownerfile_audit_tools_group_ownership_6:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerfile_audit_tools_group_ownership_6:obj:1 of type file_object
FilepathFilterFilter
/sbin/augenrulesoval:ssg-symlink_file_groupownerfile_audit_tools_group_ownership_uid_0:ste:1oval:ssg-state_file_groupownerfile_audit_tools_group_ownership_gid_0_6:ste:1
Audit Tools Must Be Owned by Rootxccdf_org.ssgproject.content_rule_file_audit_tools_ownership mediumCCE-86263-1

Audit Tools Must Be Owned by Root

Rule IDxccdf_org.ssgproject.content_rule_file_audit_tools_ownership
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_audit_tools_ownership:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86263-1

References:  CCI-001493, CCI-001494, CCI-001495, AU-9, SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099, RHEL-09-232220, SV-257924r925759_rule

Description
Red Hat Enterprise Linux 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. Audit tools must have the correct owner.
Rationale
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operations on audit information.
OVAL test results details

Testing user ownership of /sbin/auditctl  oval:ssg-test_file_ownerfile_audit_tools_ownership_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_0:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditctloval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_0:ste:1

Testing user ownership of /sbin/aureport  oval:ssg-test_file_ownerfile_audit_tools_ownership_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_1:obj:1 of type file_object
FilepathFilterFilter
/sbin/aureportoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_1:ste:1

Testing user ownership of /sbin/ausearch  oval:ssg-test_file_ownerfile_audit_tools_ownership_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_2:obj:1 of type file_object
FilepathFilterFilter
/sbin/ausearchoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_2:ste:1

Testing user ownership of /sbin/autrace  oval:ssg-test_file_ownerfile_audit_tools_ownership_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_3:obj:1 of type file_object
FilepathFilterFilter
/sbin/autraceoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_3:ste:1

Testing user ownership of /sbin/auditd  oval:ssg-test_file_ownerfile_audit_tools_ownership_4:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_4:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditdoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_4:ste:1

Testing user ownership of /sbin/rsyslogd  oval:ssg-test_file_ownerfile_audit_tools_ownership_5:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_5:obj:1 of type file_object
FilepathFilterFilter
/sbin/rsyslogdoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_5:ste:1

Testing user ownership of /sbin/augenrules  oval:ssg-test_file_ownerfile_audit_tools_ownership_6:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerfile_audit_tools_ownership_6:obj:1 of type file_object
FilepathFilterFilter
/sbin/augenrulesoval:ssg-symlink_file_ownerfile_audit_tools_ownership_uid_0:ste:1oval:ssg-state_file_ownerfile_audit_tools_ownership_uid_0_6:ste:1
Audit Tools Must Have a Mode of 0755 or Less Permissivexccdf_org.ssgproject.content_rule_file_audit_tools_permissions mediumCCE-86228-4

Audit Tools Must Have a Mode of 0755 or Less Permissive

Rule IDxccdf_org.ssgproject.content_rule_file_audit_tools_permissions
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_audit_tools_permissions:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86228-4

References:  CCI-001493, AU-9, SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099, RHEL-09-232035, SV-257887r925648_rule

Description
Red Hat Enterprise Linux 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools. Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators. Audit tools must have a mode of 0755 or less permissive.
Rationale
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operations on audit information.
OVAL test results details

Testing mode of /sbin/auditctl  oval:ssg-test_file_permissionsfile_audit_tools_permissions_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_0:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditctloval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_0_mode_0755or_stricter_:ste:1

Testing mode of /sbin/aureport  oval:ssg-test_file_permissionsfile_audit_tools_permissions_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_1:obj:1 of type file_object
FilepathFilterFilter
/sbin/aureportoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_1_mode_0755or_stricter_:ste:1

Testing mode of /sbin/ausearch  oval:ssg-test_file_permissionsfile_audit_tools_permissions_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_2:obj:1 of type file_object
FilepathFilterFilter
/sbin/ausearchoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_2_mode_0755or_stricter_:ste:1

Testing mode of /sbin/autrace  oval:ssg-test_file_permissionsfile_audit_tools_permissions_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_3:obj:1 of type file_object
FilepathFilterFilter
/sbin/autraceoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_3_mode_0755or_stricter_:ste:1

Testing mode of /sbin/auditd  oval:ssg-test_file_permissionsfile_audit_tools_permissions_4:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_4:obj:1 of type file_object
FilepathFilterFilter
/sbin/auditdoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_4_mode_0755or_stricter_:ste:1

Testing mode of /sbin/rsyslogd  oval:ssg-test_file_permissionsfile_audit_tools_permissions_5:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_5:obj:1 of type file_object
FilepathFilterFilter
/sbin/rsyslogdoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_5_mode_0755or_stricter_:ste:1

Testing mode of /sbin/augenrules  oval:ssg-test_file_permissionsfile_audit_tools_permissions_6:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsfile_audit_tools_permissions_6:obj:1 of type file_object
FilepathFilterFilter
/sbin/augenrulesoval:ssg-exclude_symlinks_file_audit_tools_permissions:ste:1oval:ssg-state_file_permissionsfile_audit_tools_permissions_6_mode_0755or_stricter_:ste:1
Enable Dracut FIPS Modulexccdf_org.ssgproject.content_rule_enable_dracut_fips_module highCCE-86547-7

Enable Dracut FIPS Module

Rule IDxccdf_org.ssgproject.content_rule_enable_dracut_fips_module
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-enable_dracut_fips_module:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-86547-7

References:  CCI-000068, CCI-000803, CCI-002450, 1446, CIP-003-8 R4.2, CIP-007-3 R5.1, SC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12, FCS_RBG_EXT.1, SRG-OS-000478-GPOS-00223, RHEL-09-671010, SV-258230r926677_rule

Description
To enable FIPS mode, run the following command:
fips-mode-setup --enable
To enable FIPS, the system requires that the fips module is added in dracut configuration. Check if /etc/dracut.conf.d/40-fips.conf contain add_dracutmodules+=" fips "
Rationale
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
OVAL test results details

add_dracutmodules contains fips  oval:ssg-test_enable_dracut_fips_module:tst:1  true

Following items have been found on the system:
PathContent
/etc/dracut.conf.d/40-fips.conf add_dracutmodules+=" fips "
Enable FIPS Modexccdf_org.ssgproject.content_rule_enable_fips_mode highCCE-88742-2

Enable FIPS Mode

Rule IDxccdf_org.ssgproject.content_rule_enable_fips_mode
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-enable_fips_mode:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-88742-2

References:  CCI-000068, CCI-000803, CCI-002450, 1446, CIP-003-8 R4.2, CIP-007-3 R5.1, CM-3(6), SC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12, FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, FCS_RBG_EXT.1, SRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176, RHEL-09-671010, SV-258230r926677_rule

Description
To enable FIPS mode, run the following command:
fips-mode-setup --enable

The fips-mode-setup command will configure the system in FIPS mode by automatically configuring the following:
  • Setting the kernel FIPS mode flag (/proc/sys/crypto/fips_enabled) to 1
  • Creating /etc/system-fips
  • Setting the system crypto policy in /etc/crypto-policies/config to FIPS
  • Loading the Dracut fips module
Rationale
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  This rule DOES NOT CHECK if the components of the operating system are FIPS certified. You can find the list of FIPS certified modules at https://csrc.nist.gov/projects/cryptographic-module-validation-program/validated-modules/search. This rule checks if the system is running in FIPS mode. See the rule description for more information about what it means.
OVAL test results details

/etc/system-fips exists  oval:ssg-test_etc_system_fips:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/system-fipsregular0036rw-r--r-- 

kernel runtime parameter crypto.fips_enabled set to 1  oval:ssg-test_sysctl_crypto_fips_enabled:tst:1  true

Following items have been found on the system:
NameValue
crypto.fips_enabled1

add_dracutmodules contains fips  oval:ssg-test_enable_dracut_fips_module:tst:1  true

Following items have been found on the system:
PathContent
/etc/dracut.conf.d/40-fips.conf add_dracutmodules+=" fips "

check for crypto policy correctly configured in /etc/crypto-policies/config  oval:ssg-test_configure_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/configFIPS

check for crypto policy correctly configured in /etc/crypto-policies/state/current  oval:ssg-test_configure_crypto_policy_current:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/state/currentFIPS

Check if update-crypto-policies has been run  oval:ssg-test_crypto_policies_updated:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-variable_crypto_policies_config_file_timestamp:var:11704730735

Check if /etc/crypto-policies/back-ends/nss.config exists  oval:ssg-test_crypto_policy_nss_config:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/crypto-policies/back-ends/nss.configregular00398rw-r--r-- 

test if var_system_crypto_policy selection is set to FIPS  oval:ssg-test_system_crypto_policy_value:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_system_crypto_policy:var:1FIPS

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

check if kernel option fips=1 is present in options in /boot/loader/entries/.*.conf  oval:ssg-test_fips_1_argument_in_boot_loader_entries_conf:tst:1  true

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

check if kernel option fips=1 is present in options in /boot/loader/entries/.*.conf  oval:ssg-test_fips_1_argument_in_boot_loader_entries_conf:tst:1  true

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw
Set kernel parameter 'crypto.fips_enabled' to 1xccdf_org.ssgproject.content_rule_sysctl_crypto_fips_enabled highCCE-83441-6

Set kernel parameter 'crypto.fips_enabled' to 1

Rule IDxccdf_org.ssgproject.content_rule_sysctl_crypto_fips_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_crypto_fips_enabled:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83441-6

References:  CCI-000068, CCI-000803, CCI-000877, CCI-001453, CCI-002418, CCI-002450, CCI-002890, CCI-003123, CIP-003-8 R4.2, CIP-007-3 R5.1, SC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12, SRG-OS-000033-GPOS-00014, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, SRG-OS-000396-GPOS-00176, SRG-OS-000423-GPOS-00187, SRG-OS-000478-GPOS-00223, RHEL-09-671010, SV-258230r926677_rule

Description
System running in FIPS mode is indicated by kernel parameter 'crypto.fips_enabled'. This parameter should be set to 1 in FIPS mode. To enable FIPS mode, run the following command:
fips-mode-setup --enable
To enable strict FIPS compliance, the fips=1 kernel option needs to be added to the kernel boot parameters during system installation so key generation is done with FIPS-approved algorithms and continuous monitoring tests in place.
Rationale
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
OVAL test results details

kernel runtime parameter crypto.fips_enabled set to 1  oval:ssg-test_sysctl_crypto_fips_enabled:tst:1  true

Following items have been found on the system:
NameValue
crypto.fips_enabled1
Install crypto-policies packagexccdf_org.ssgproject.content_rule_package_crypto-policies_installed mediumCCE-83442-4

Install crypto-policies package

Rule IDxccdf_org.ssgproject.content_rule_package_crypto-policies_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_crypto-policies_installed:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83442-4

References:  FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, SRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, RHEL-09-672010, SV-258234r926689_rule

Description
The crypto-policies package can be installed with the following command:
$ sudo dnf install crypto-policies
Rationale
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data.
OVAL test results details

package crypto-policies is installed  oval:ssg-test_package_crypto-policies_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
crypto-policiesnoarch(none)1.git94f0e2c.el9_3.1202307310:20230731-1.git94f0e2c.el9_3.1199e2f91fd431d51crypto-policies-0:20230731-1.git94f0e2c.el9_3.1.noarch
Configure BIND to use System Crypto Policyxccdf_org.ssgproject.content_rule_configure_bind_crypto_policy highCCE-83451-5

Configure BIND to use System Crypto Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_bind_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_bind_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83451-5

References:  CIP-003-8 R4.2, CIP-007-3 R5.1, SC-13, SC-12(2), SC-12(3), SRG-OS-000423-GPOS-00187, SRG-OS-000426-GPOS-00190, RHEL-09-672050, SV-258242r926713_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. BIND is supported by crypto policy, but the BIND configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the /etc/named.conf includes the appropriate configuration: In the options section of /etc/named.conf, make sure that the following line is not commented out or superseded by later includes: include "/etc/crypto-policies/back-ends/bind.config";
Rationale
Overriding the system crypto policy makes the behavior of the BIND service violate expectations, and makes system configuration more fragmented.
OVAL test results details

package bind is removed  oval:ssg-test_package_bind_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_bind_removed:obj:1 of type rpminfo_object
Name
bind

Check that the configuration includes the policy config file.  oval:ssg-test_configure_bind_crypto_policy:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_configure_bind_crypto_policy:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/named.conf^\s*include\s+"/etc/crypto-policies/back-ends/bind.config"\s*;\s*$1
Configure System Cryptography Policyxccdf_org.ssgproject.content_rule_configure_crypto_policy highCCE-83450-7

Configure System Cryptography Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83450-7

References:  A.5.SEC-RHEL4, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), 1446, CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3), FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, SRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, RHEL-09-671010, RHEL-09-672030, RHEL-09-672045, 1.10, SV-258230r926677_rule, SV-258238r926701_rule, SV-258241r926710_rule

Description
To configure the system cryptography policy to use ciphers only from the FIPS policy, run the following command:
$ sudo update-crypto-policies --set FIPS
The rule checks if settings for selected crypto policy are configured as expected. Configuration files in the /etc/crypto-policies/back-ends are either symlinks to correct files provided by Crypto-policies package or they are regular files in case crypto policy customizations are applied. Crypto policies may be customized by crypto policy modules, in which case it is delimited from the base policy using a colon.
Rationale
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
OVAL test results details

check for crypto policy correctly configured in /etc/crypto-policies/config  oval:ssg-test_configure_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/configFIPS

check for crypto policy correctly configured in /etc/crypto-policies/state/current  oval:ssg-test_configure_crypto_policy_current:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/state/currentFIPS

Check if update-crypto-policies has been run  oval:ssg-test_crypto_policies_updated:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-variable_crypto_policies_config_file_timestamp:var:11704730735

Check if /etc/crypto-policies/back-ends/nss.config exists  oval:ssg-test_crypto_policy_nss_config:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/crypto-policies/back-ends/nss.configregular00398rw-r--r-- 
Configure Kerberos to use System Crypto Policyxccdf_org.ssgproject.content_rule_configure_kerberos_crypto_policy highCCE-83449-9

Configure Kerberos to use System Crypto Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_kerberos_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_kerberos_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83449-9

References:  0418, 1055, 1402, CIP-003-8 R4.2, CIP-007-3 R5.1, SC-13, SC-12(2), SC-12(3), SRG-OS-000120-GPOS-00061, RHEL-09-672025, SV-258237r926698_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. Kerberos is supported by crypto policy, but it's configuration may be set up to ignore it. To check that Crypto Policies settings for Kerberos are configured correctly, examine that there is a symlink at /etc/krb5.conf.d/crypto-policies targeting /etc/cypto-policies/back-ends/krb5.config. If the symlink exists, Kerberos is configured to use the system-wide crypto policy settings.
Rationale
Overriding the system crypto policy makes the behavior of Kerberos violate expectations, and makes system configuration more fragmented.
OVAL test results details

Check if kerberos configuration symlink and crypto policy kerberos backend symlink point to same file  oval:ssg-test_configure_kerberos_crypto_policy_symlink:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_symlink_kerberos_crypto_policy_configuration:var:1/usr/share/crypto-policies/FIPS/krb5.txt

Check if kerberos configuration symlink links to the crypto-policy backend file  oval:ssg-test_configure_kerberos_crypto_policy_nosymlink:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-var_symlink_kerberos_crypto_policy_configuration:var:1/usr/share/crypto-policies/FIPS/krb5.txt
Configure Libreswan to use System Crypto Policyxccdf_org.ssgproject.content_rule_configure_libreswan_crypto_policy highCCE-83446-5

Configure Libreswan to use System Crypto Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_libreswan_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_libreswan_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83446-5

References:  CIP-003-8 R4.2, CIP-007-3 R5.1, CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3), FCS_IPSEC_EXT.1.4, FCS_IPSEC_EXT.1.6, Req-2.2, 2.2, SRG-OS-000033-GPOS-00014, RHEL-09-671020, SV-258232r926683_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. Libreswan is supported by system crypto policy, but the Libreswan configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the /etc/ipsec.conf includes the appropriate configuration file. In /etc/ipsec.conf, make sure that the following line is not commented out or superseded by later includes: include /etc/crypto-policies/back-ends/libreswan.config
Rationale
Overriding the system crypto policy makes the behavior of the Libreswan service violate expectations, and makes system configuration more fragmented.
OVAL test results details

package libreswan is installed  oval:ssg-test_package_libreswan_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
libreswanx86_64(none)1.el94.120:4.12-1.el9199e2f91fd431d51libreswan-0:4.12-1.el9.x86_64

Check that the libreswan configuration includes the crypto policy config file  oval:ssg-test_configure_libreswan_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/ipsec.confinclude /etc/crypto-policies/back-ends/libreswan.config # It is best to add your IPsec connections as separate files
Configure OpenSSL library to use System Crypto Policyxccdf_org.ssgproject.content_rule_configure_openssl_crypto_policy mediumCCE-83452-3

Configure OpenSSL library to use System Crypto Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_openssl_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_openssl_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83452-3

References:  CCI-001453, CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3), Req-2.2, 2.2, SRG-OS-000250-GPOS-00093, RHEL-09-672035, SV-258239r926704_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. OpenSSL is supported by crypto policy, but the OpenSSL configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, you have to examine the OpenSSL config file available under /etc/pki/tls/openssl.cnf. This file has the ini format, and it enables crypto policy support if there is a [ crypto_policy ] section that contains the .include = /etc/crypto-policies/back-ends/opensslcnf.config directive.
Rationale
Overriding the system crypto policy makes the behavior of the Java runtime violates expectations, and makes system configuration more fragmented.
OVAL test results details

Check that the configuration mandates usage of system-wide crypto policies.  oval:ssg-test_configure_openssl_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/pki/tls/openssl.cnf [ crypto_policy ] .include = /etc/crypto-policies/back-ends/opensslcnf.config
Configure OpenSSL library to use TLS Encryptionxccdf_org.ssgproject.content_rule_configure_openssl_tls_crypto_policy mediumCCE-83448-1

Configure OpenSSL library to use TLS Encryption

Rule IDxccdf_org.ssgproject.content_rule_configure_openssl_tls_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_openssl_tls_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83448-1

References:  CCI-001453, AC-17(2), SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, RHEL-09-672040, SV-258240r926707_rule

Description
Crypto Policies are means of enforcing certain cryptographic settings for selected applications including OpenSSL. OpenSSL is by default configured to modify its configuration based on currently configured Crypto Policy. Editing the Crypto Policy back-end is not recommended. Check the crypto-policies(7) man page and choose a policy that configures TLS protocol to version 1.2 or higher, for example DEFAULT, FUTURE or FIPS policy. Or create and apply a custom policy that restricts minimum TLS version to 1.2. For example for versions prior to crypto-policies-20210617-1.gitc776d3e.el8.noarch this is expected:
$ sudo grep -i MinProtocol /etc/crypto-policies/back-ends/opensslcnf.config

MinProtocol = TLSv1.2
Or for version crypto-policies-20210617-1.gitc776d3e.el8.noarch and newer this is expected:
$ sudo grep -i MinProtocol /etc/crypto-policies/back-ends/opensslcnf.config

TLS.MinProtocol = TLSv1.2
DTLS.MinProtocol = DTLSv1.2
Rationale
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Warnings
warning  This rule doesn't come with a remediation, automatically changing the crypto-policies may be too disruptive. Ensure the variable xccdf_org.ssgproject.content_value_var_system_crypto_policy is set to a Crypto Policy that satisfies OpenSSL minimum TLS protocol version 1.2. Custom policies may be applied too.
OVAL test results details

Check that the SSH configuration mandates usage of system-wide crypto policies.  oval:ssg-test_configure_openssl_tls_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/back-ends/opensslcnf.configTLS.MinProtocol = TLSv1.2

Installed version of crypto-policies is older than 20210617-1  oval:ssg-test_installed_version_of_crypto_policies:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
crypto-policiesnoarch(none)1.git94f0e2c.el9_3.1202307310:20230731-1.git94f0e2c.el9_3.1199e2f91fd431d51crypto-policies-0:20230731-1.git94f0e2c.el9_3.1.noarch

Check that the SSH configuration mandates usage of system-wide crypto policies.  oval:ssg-test_configure_openssl_dtls_crypto_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/crypto-policies/back-ends/opensslcnf.configDTLS.MinProtocol = DTLSv1.2
Configure SSH to use System Crypto Policyxccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy mediumCCE-83445-7

Configure SSH to use System Crypto Policy

Rule IDxccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_ssh_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83445-7

References:  A.5.SEC-RHEL6, A.11.SEC-RHEL6, CCI-001453, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), CIP-003-8 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, FCS_SSH_EXT.1, FCS_SSHS_EXT.1, FCS_SSHC_EXT.1, Req-2.2, 2.2, SRG-OS-000250-GPOS-00093, RHEL-09-255055, 5.2.14, SV-257987r925948_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the CRYPTO_POLICY variable is either commented or not set at all in the /etc/sysconfig/sshd.
Rationale
Overriding the system crypto policy makes the behavior of the SSH service violate expectations, and makes system configuration more fragmented.
OVAL test results details

Check that the SSH configuration mandates usage of system-wide crypto policies.  oval:ssg-test_configure_ssh_crypto_policy:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_configure_ssh_crypto_policy:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/sysconfig/sshd^\s*(?i)CRYPTO_POLICY\s*=.*$1
Configure SSH Client to Use FIPS 140-2 Validated Ciphers: openssh.configxccdf_org.ssgproject.content_rule_harden_sshd_ciphers_openssh_conf_crypto_policy highCCE-90125-6

Configure SSH Client to Use FIPS 140-2 Validated Ciphers: openssh.config

Rule IDxccdf_org.ssgproject.content_rule_harden_sshd_ciphers_openssh_conf_crypto_policy
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-harden_sshd_ciphers_openssh_conf_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-90125-6

References:  CCI-000068, CCI-000877, CCI-001453, CCI-002418, CCI-002890, CCI-003123, AC-17(2), SRG-OS-000033-GPOS-00014, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, SRG-OS-000423-GPOS-00187, RHEL-09-255060, SV-257988r925951_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. OpenSSH is supported by system crypto policy, but the OpenSSH configuration may be set up incorrectly. To check that Crypto Policies settings for ciphers are configured correctly, ensure that /etc/crypto-policies/back-ends/openssh.config contains the following line and is not commented out:
Ciphers aes256-ctr,aes192-ctr,aes128-ctr,aes256-gcm@openssh.com,aes128-gcm@openssh.com
Rationale
Overriding the system crypto policy makes the behavior of the OpenSSH client violate expectations, and makes system configuration more fragmented. By specifying a cipher list with the order of ciphers being in a “strongest to weakest” orientation, the system will automatically attempt to use the strongest cipher for securing SSH connections.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
OVAL test results details

test the value of Ciphers setting in the /etc/crypto-policies/back-ends/openssh.config file  oval:ssg-test_harden_sshd_ciphers_openssh_conf_crypto_policy:tst:1  false

Following items have been found on the system:
PathContent
/etc/crypto-policies/back-ends/openssh.configCiphers aes256-gcm@openssh.com,aes256-ctr,aes128-gcm@openssh.com,aes128-ctr
Configure SSH Server to Use FIPS 140-2 Validated Ciphers: opensshserver.configxccdf_org.ssgproject.content_rule_harden_sshd_ciphers_opensshserver_conf_crypto_policy mediumCCE-87332-3

Configure SSH Server to Use FIPS 140-2 Validated Ciphers: opensshserver.config

Rule IDxccdf_org.ssgproject.content_rule_harden_sshd_ciphers_opensshserver_conf_crypto_policy
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-harden_sshd_ciphers_opensshserver_conf_crypto_policy:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87332-3

References:  CCI-000877, CCI-001453, AC-17(2), SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, RHEL-09-255065, SV-257989r925954_rule

Description
Crypto Policies provide a centralized control over crypto algorithms usage of many packages. OpenSSH is supported by system crypto policy, but the OpenSSH configuration may be set up incorrectly. To check that Crypto Policies settings for ciphers are configured correctly, ensure that /etc/crypto-policies/back-ends/opensshserver.config contains the following text and is not commented out:
-oCiphers=aes256-ctr,aes192-ctr,aes128-ctr,aes256-gcm@openssh.com,aes128-gcm@openssh.com
Rationale
Overriding the system crypto policy makes the behavior of the OpenSSH server violate expectations, and makes system configuration more fragmented. By specifying a cipher list with the order of ciphers being in a “strongest to weakest” orientation, the system will automatically attempt to use the strongest cipher for securing SSH connections.
Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
OVAL test results details

test the value of Ciphers setting in the /etc/crypto-policies/back-ends/opensshserver.config file  oval:ssg-test_harden_sshd_ciphers_opensshserver_conf_crypto_policy:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_harden_sshd_ciphers_opensshserver_conf_crypto_policy:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/crypto-policies/back-ends/opensshserver.config^(?!#).*(-oCiphers=[^\s']+).*$1
The Installed Operating System Is Vendor Supportedxccdf_org.ssgproject.content_rule_installed_OS_is_vendor_supported highCCE-83453-1

The Installed Operating System Is Vendor Supported

Rule IDxccdf_org.ssgproject.content_rule_installed_OS_is_vendor_supported
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-installed_OS_is_vendor_supported:def:1
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83453-1

References:  18, 20, 4, APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02, CCI-000366, 4.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3, CM-6(a), MA-6, SA-13(a), ID.RA-1, PR.IP-12, SRG-OS-000480-GPOS-00227, RHEL-09-211010, SV-257777r925318_rule

Description
The installed operating system must be maintained by a vendor. Red Hat Enterprise Linux is supported by Red Hat, Inc. As the Red Hat Enterprise Linux vendor, Red Hat, Inc. is responsible for providing security patches.
Rationale
An operating system is considered "supported" if the vendor continues to provide security patches for the product. With an unsupported release, it will not be possible to resolve any security issue discovered in the system software.
Warnings
warning  There is no remediation besides switching to a different operating system.
OVAL test results details

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_unix_family:obj:1 of type family_object

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel7_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_unix_family:obj:1 of type family_object

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-client is version 7  oval:ssg-test_rhel7_client:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_client:obj:1 of type rpminfo_object
Name
redhat-release-client

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-workstation is version 7  oval:ssg-test_rhel7_workstation:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_workstation:obj:1 of type rpminfo_object
Name
redhat-release-workstation

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-server is version 7  oval:ssg-test_rhel7_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_server:obj:1 of type rpminfo_object
Name
redhat-release-server

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-computenode is version 7  oval:ssg-test_rhel7_computenode:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel7_computenode:obj:1 of type rpminfo_object
Name
redhat-release-computenode

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 7  oval:ssg-test_rhevh_rhel7_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel7_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8_unix_family:obj:1 of type family_object

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8:obj:1 of type rpminfo_object
Name
redhat-release

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel8_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8_unix_family:obj:1 of type family_object

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 8  oval:ssg-test_rhel8:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhel8:obj:1 of type rpminfo_object
Name
redhat-release

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 8  oval:ssg-test_rhevh_rhel8_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel8_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 7  oval:ssg-test_ol7_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol7_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 8  oval:ssg-test_ol8_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol8_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 8  oval:ssg-test_ol8_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol8_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

oraclelinux-release is version 8  oval:ssg-test_ol8_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol8_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

oraclelinux-release is version 8  oval:ssg-test_ol8_system:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_ol8_system:obj:1 of type rpminfo_object
Name
oraclelinux-release

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_unix_family:obj:1 of type family_object

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle12_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_unix_family:obj:1 of type family_object

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 6  oval:ssg-test_sle12_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 6  oval:ssg-test_sle12_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle12_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 12  oval:ssg-test_sles_12_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_12_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_unix_family:obj:1 of type family_object

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_sle15_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_unix_family:obj:1 of type family_object

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sled-release is version 15  oval:ssg-test_sle15_desktop:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_desktop:obj:1 of type rpminfo_object
Name
sled-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

sles-release is version 15  oval:ssg-test_sle15_server:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle15_server:obj:1 of type rpminfo_object
Name
sles-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SLES_SAP-release is version 15  oval:ssg-test_sles_15_for_sap:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sles_15_for_sap:obj:1 of type rpminfo_object
Name
SLES_SAP-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SUMA is version 4  oval:ssg-test_suma_4:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_suma_4:obj:1 of type rpminfo_object
Name
SUSE-Manager-Server-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release

SLE HPC release is version 15  oval:ssg-test_sle_hpc:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_sle_hpc:obj:1 of type rpminfo_object
Name
SLE_HPC-release
Install McAfee Endpoint Security for Linux (ENSL)xccdf_org.ssgproject.content_rule_package_mcafeetp_installed mediumCCE-86236-7

Install McAfee Endpoint Security for Linux (ENSL)

Rule IDxccdf_org.ssgproject.content_rule_package_mcafeetp_installed
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-package_mcafeetp_installed:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86236-7

References:  CCI-001263, CCI-000366, SI-2(2), SRG-OS-000191-GPOS-00080, RHEL-09-211025, SV-257780r925327_rule

Description
Install McAfee Endpoint Security for Linux antivirus software which is provided for DoD systems and uses signatures to search for the presence of viruses on the filesystem. The McAfeeTP package can be installed with the following command:
$ sudo dnf install McAfeeTP
Rationale
Virus scanning software can be used to detect if a system has been compromised by computer viruses, as well as to limit their spread to other systems.
Warnings
warning  Due to McAfee Endpoint Security for Linux (ENSL) being 3rd party software, automated remediation is not available for this configuration check.
OVAL test results details

package McAfeeTP is installed  oval:ssg-test_package_McAfeeTP_installed:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_McAfeeTP_installed:obj:1 of type rpminfo_object
Name
McAfeeTP
Ensure McAfee Endpoint Security for Linux (ENSL) is runningxccdf_org.ssgproject.content_rule_agent_mfetpd_running mediumCCE-88806-5

Ensure McAfee Endpoint Security for Linux (ENSL) is running

Rule IDxccdf_org.ssgproject.content_rule_agent_mfetpd_running
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-agent_mfetpd_running:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88806-5

References:  CCI-001263, CCI-000366, SI-2(2), SRG-OS-000191-GPOS-00080, RHEL-09-211025, SV-257780r925327_rule

Description
Install McAfee Endpoint Security for Linux antivirus software which is provided for DoD systems and uses signatures to search for the presence of viruses on the filesystem.
Rationale
Virus scanning software can be used to detect if a system has been compromised by computer viruses, as well as to limit their spread to other systems.
Warnings
warning  Due to McAfee Endpoint Security for Linux (ENSL) being 3rd party software, automated remediation is not available for this configuration check.
OVAL test results details

is mfetpd running  oval:ssg-test_agent_mfetpd_running:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_agent_mfetpd_running:obj:1 of type process58_object
Command linePid
^mfetpd.*$0
Encrypt Partitionsxccdf_org.ssgproject.content_rule_encrypt_partitions highCCE-90849-1

Encrypt Partitions

Rule IDxccdf_org.ssgproject.content_rule_encrypt_partitions
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-90849-1

References:  A.25.SEC-RHEL1, A.25.SEC-RHEL2, 13, 14, APO01.06, BAI02.01, BAI06.01, DSS04.07, DSS05.03, DSS05.04, DSS05.07, DSS06.02, DSS06.06, 3.13.16, CCI-001199, CCI-002475, CCI-002476, 164.308(a)(1)(ii)(D), 164.308(b)(1), 164.310(d), 164.312(a)(1), 164.312(a)(2)(iii), 164.312(a)(2)(iv), 164.312(b), 164.312(c), 164.314(b)(2)(i), 164.312(d), SR 3.4, SR 4.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R4.2, CIP-007-3 R5.1, CM-6(a), SC-28, SC-28(1), SC-13, AU-9(3), PR.DS-1, PR.DS-5, SRG-OS-000405-GPOS-00184, SRG-OS-000185-GPOS-00079, SRG-OS-000404-GPOS-00183, RHEL-09-231190, SV-257879r925624_rule

Description
Red Hat Enterprise Linux 9 natively supports partition encryption through the Linux Unified Key Setup-on-disk-format (LUKS) technology. The easiest way to encrypt a partition is during installation time.

For manual installations, select the Encrypt checkbox during partition creation to encrypt the partition. When this option is selected the system will prompt for a passphrase to use in decrypting the partition. The passphrase will subsequently need to be entered manually every time the system boots.

For automated/unattended installations, it is possible to use Kickstart by adding the --encrypted and --passphrase= options to the definition of each partition to be encrypted. For example, the following line would encrypt the root partition:
part / --fstype=ext4 --size=100 --onpart=hda1 --encrypted --passphrase=PASSPHRASE
Any PASSPHRASE is stored in the Kickstart in plaintext, and the Kickstart must then be protected accordingly. Omitting the --passphrase= option from the partition definition will cause the installer to pause and interactively ask for the passphrase during installation.

By default, the Anaconda installer uses aes-xts-plain64 cipher with a minimum 512 bit key size which should be compatible with FIPS enabled.

Detailed information on encrypting partitions using LUKS or LUKS ciphers can be found on the Red Hat Enterprise Linux 9 Documentation web site:
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/security_hardening/encrypting-block-devices-using-luks_security-hardening .
Rationale
The risk of a system's physical compromise, particularly mobile systems such as laptops, places its data at risk of compromise. Encrypting this data mitigates the risk of its loss if the system is lost.
Evaluation messages
info 
No candidate or applicable check found.
Ensure /home Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_home lowCCE-83468-9

Ensure /home Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_home
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_home:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83468-9

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, CCI-001208, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-231010, 1.1.7.1, SV-257843r925516_rule

Description
If user home directories will be stored locally, create a separate partition for /home at installation time (or migrate it later using LVM). If /home will be mounted from another system such as an NFS server, then creating a separate partition is not necessary at installation time, and the mountpoint can instead be configured later.
Rationale
Ensuring that /home is mounted on its own partition enables the setting of more restrictive mount options, and also helps ensure that users cannot trivially fill partitions used for log or audit data storage.

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /home


[[customizations.filesystem]]
mountpoint = "/home"
size = 1073741824
OVAL test results details

/home on own partition  oval:ssg-testhome_partition:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_mounthome_own_partition:obj:1 of type partition_object
Mount point
/home
Ensure /tmp Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_tmp lowCCE-90845-9

Ensure /tmp Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_tmp
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_tmp:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-90845-9

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-231015, 1.1.2.1, SV-257844r925519_rule

Description
The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale
The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /tmp


[[customizations.filesystem]]
mountpoint = "/tmp"
size = 1073741824
OVAL test results details

/tmp on own partition  oval:ssg-testtmp_partition:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_mounttmp_own_partition:obj:1 of type partition_object
Mount point
/tmp
Ensure /var Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_var lowCCE-83466-3

Ensure /var Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_var
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_var:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83466-3

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-231020, 1.1.3.1, SV-257845r925522_rule

Description
The /var directory is used by daemons and other system services to store frequently-changing data. Ensure that /var has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale
Ensuring that /var is mounted on its own partition enables the setting of more restrictive mount options. This helps protect system services such as daemons or other programs which use it. It is not uncommon for the /var directory to contain world-writable directories installed by other software packages.
OVAL test results details

/var on own partition  oval:ssg-testvar_partition:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/var/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646114949779
Ensure /var/log Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_var_log lowCCE-90848-3

Ensure /var/log Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_var_log
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_var_log:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-90848-3

References:  BP28(R12), BP28(R47), 1, 12, 14, 15, 16, 3, 5, 6, 8, APO11.04, APO13.01, BAI03.05, DSS05.02, DSS05.04, DSS05.07, MEA02.01, CCI-000366, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, CIP-007-3 R6.5, CM-6(a), AU-4, SC-5(2), PR.PT-1, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-231025, 1.1.5.1, SV-257846r925525_rule

Description
System logs are stored in the /var/log directory. Ensure that /var/log has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale
Placing /var/log in its own partition enables better separation between log files and other files in /var/.

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /var/log


[[customizations.filesystem]]
mountpoint = "/var/log"
size = 5368709120
OVAL test results details

/var/log on own partition  oval:ssg-testvar_log_partition:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_mountvar_log_own_partition:obj:1 of type partition_object
Mount point
/var/log
Ensure /var/log/audit Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_var_log_audit lowCCE-90847-5

Ensure /var/log/audit Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_var_log_audit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_var_log_audit:def:1
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-90847-5

References:  BP28(R43), 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 8, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.02, DSS05.04, DSS05.07, MEA02.01, CCI-000366, CCI-001849, 164.312(a)(2)(ii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.2, SR 7.6, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.17.2.1, CIP-007-3 R6.5, CM-6(a), AU-4, SC-5(2), PR.DS-4, PR.PT-1, PR.PT-4, FMT_SMF_EXT.1, SRG-OS-000341-GPOS-00132, SRG-OS-000480-GPOS-00227, RHEL-09-231030, 1.1.6.1, SV-257847r925528_rule

Description
Audit logs are stored in the /var/log/audit directory. Ensure that /var/log/audit has its own partition or logical volume at installation time, or migrate it using LVM. Make absolutely certain that it is large enough to store all audit logs that will be created by the auditing daemon.
Rationale
Placing /var/log/audit in its own partition enables better separation between audit files and other files, and helps ensure that auditing cannot be halted due to the partition running out of space.

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /var/log/audit


[[customizations.filesystem]]
mountpoint = "/var/log/audit"
size = 10737418240
OVAL test results details

/var/log/audit on own partition  oval:ssg-testvar_log_audit_partition:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_mountvar_log_audit_own_partition:obj:1 of type partition_object
Mount point
/var/log/audit
Ensure /var/tmp Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_var_tmp mediumCCE-83487-9

Ensure /var/tmp Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_var_tmp
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-partition_for_var_tmp:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83487-9

References:  BP28(R12), SRG-OS-000480-GPOS-00227, RHEL-09-231035, 1.1.4.1, SV-257848r925531_rule

Description
The /var/tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale
The /var/tmp partition is used as temporary storage by many programs. Placing /var/tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /var/tmp


[[customizations.filesystem]]
mountpoint = "/var/tmp"
size = 1073741824
OVAL test results details

/var/tmp on own partition  oval:ssg-testvar_tmp_partition:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_mountvar_tmp_own_partition:obj:1 of type partition_object
Mount point
/var/tmp
Disable the GNOME3 Login Restart and Shutdown Buttonsxccdf_org.ssgproject.content_rule_dconf_gnome_disable_restart_shutdown highCCE-86315-9

Disable the GNOME3 Login Restart and Shutdown Buttons

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_disable_restart_shutdown
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-86315-9

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.2, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), CM-7(b), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-271095, RHEL-09-271100, SV-258029r926074_rule, SV-258030r926077_rule

Description
In the default graphical environment, users logging directly into the system are greeted with a login screen that allows any user, known or unknown, the ability the ability to shutdown or restart the system. This functionality should be disabled by setting disable-restart-buttons to true.

To disable, add or edit disable-restart-buttons to /etc/dconf/db/distro.d/00-security-settings. For example:
[org/gnome/login-screen]
disable-restart-buttons=true
Once the setting has been added, add a lock to /etc/dconf/db/distro.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/login-screen/disable-restart-buttons
After the settings have been set, run dconf update.
Rationale
A user who is at the console can reboot the system at the login screen. If restart or shutdown buttons are pressed at the login screen, this can create the risk of short-term loss of availability of systems due to reboot.
Disable the GNOME3 Login User Listxccdf_org.ssgproject.content_rule_dconf_gnome_disable_user_list mediumCCE-88285-2

Disable the GNOME3 Login User List

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_disable_user_list
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88285-2

References:  A.11.SEC-RHEL9, CM-6(a), AC-23, SRG-OS-000480-GPOS-00227, RHEL-09-271115, 1.8.3, SV-258033r926086_rule

Description
In the default graphical environment, users logging directly into the system are greeted with a login screen that displays all known users. This functionality should be disabled by setting disable-user-list to true.

To disable, add or edit disable-user-list to /etc/dconf/db/distro.d/00-security-settings. For example:
[org/gnome/login-screen]
disable-user-list=true
Once the setting has been added, add a lock to /etc/dconf/db/distro.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/login-screen/disable-user-list
After the settings have been set, run dconf update.
Rationale
Leaving the user list enabled is a security risk since it allows anyone with physical access to the system to quickly enumerate known user accounts without logging in.
Enable the GNOME3 Screen Locking On Smartcard Removalxccdf_org.ssgproject.content_rule_dconf_gnome_lock_screen_on_smartcard_removal mediumCCE-86452-0

Enable the GNOME3 Screen Locking On Smartcard Removal

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_lock_screen_on_smartcard_removal
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86452-0

References:  CCI-000056, CCI-000058, SRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011, RHEL-09-271045, RHEL-09-271050, SV-258019r926044_rule, SV-258020r926047_rule

Description
In the default graphical environment, screen locking on smartcard removal can be enabled by setting removal-action to 'lock-screen'.

To enable, add or edit removal-action to /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/settings-daemon/peripherals/smartcard]
removal-action='lock-screen'
Once the setting has been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/settings-daemon/peripherals/smartcard/removal-action
After the settings have been set, run dconf update.
Rationale
Locking the screen automatically when removing the smartcard can prevent undesired access to system.
Disable GNOME3 Automount Openingxccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open mediumCCE-90128-0

Disable GNOME3 Automount Opening

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_disable_automount_open
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90128-0

References:  A.11.SEC-RHEL12, 12, 16, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, 3.1.7, CCI-000366, CCI-000778, CCI-001958, 4.3.3.2.2, 4.3.3.5.2, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.13, SR 1.2, SR 1.4, SR 1.5, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.AC-6, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, RHEL-09-271020, RHEL-09-271025, 1.8.6, 1.8.7, SV-258014r926029_rule, SV-258015r926032_rule

Description
The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are inserted into the system. To disable automount-open within GNOME3, add or set automount-open to false in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/media-handling]
automount-open=false
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/media-handling/automount-open
After the settings have been set, run dconf update.
Rationale
Automatically mounting file systems permits easy introduction of unknown devices, thereby facilitating malicious activity. Disabling automatic mounting in GNOME3 can prevent the introduction of malware via removable media. It will, however, also prevent desktop users from legitimate use of removable media.
Disable GNOME3 Automount runningxccdf_org.ssgproject.content_rule_dconf_gnome_disable_autorun lowCCE-90257-7

Disable GNOME3 Automount running

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_disable_autorun
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-90257-7

References:  A.11.SEC-RHEL12, 12, 16, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, 3.1.7, CCI-000366, CCI-000778, CCI-001958, 4.3.3.2.2, 4.3.3.5.2, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.13, SR 1.2, SR 1.4, SR 1.5, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.AC-6, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, RHEL-09-271030, RHEL-09-271035, 1.8.8, 1.8.9, SV-258016r926035_rule, SV-258017r926038_rule

Description
The system's default desktop environment, GNOME3, will mount devices and removable media (such as DVDs, CDs and USB flash drives) whenever they are inserted into the system. To disable autorun-never within GNOME3, add or set autorun-never to true in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/media-handling]
autorun-never=true
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/media-handling/autorun-never
After the settings have been set, run dconf update.
Rationale
Automatically mounting file systems permits easy introduction of unknown devices, thereby facilitating malicious activity. Disabling automatic mount running in GNOME3 can prevent the introduction of malware via removable media. It will, however, also prevent desktop users from legitimate use of removable media.
Set GNOME3 Screensaver Inactivity Timeoutxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay mediumCCE-86510-5

Set GNOME3 Screensaver Inactivity Timeout

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_idle_delay
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86510-5

References:  A.11.SEC-RHEL7, 1, 12, 15, 16, 5.5.5, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000057, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-11(a), CM-6(a), PR.AC-7, FMT_MOF_EXT.1, Req-8.1.8, 8.2.8, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012, RHEL-09-271065, 1.8.4, SV-258023r926056_rule

Description
The idle time-out value for inactivity in the GNOME3 desktop is configured via the idle-delay setting must be set under an appropriate configuration file(s) in the /etc/dconf/db/local.d directory and locked in /etc/dconf/db/local.d/locks directory to prevent user modification.

For example, to configure the system for a 15 minute delay, add the following to /etc/dconf/db/local.d/00-security-settings:
[org/gnome/desktop/session]
idle-delay=uint32 900
Rationale
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME3 can be configured to identify when a user's session has idled and take action to initiate a session lock.
Set GNOME3 Screensaver Lock Delay After Activation Periodxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_delay mediumCCE-86954-5

Set GNOME3 Screensaver Lock Delay After Activation Period

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_delay
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86954-5

References:  A.11.SEC-RHEL7, 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000056, CCI-000057, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-11(a), CM-6(a), PR.AC-7, FMT_MOF_EXT.1, Req-8.1.8, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012, RHEL-09-271075, 1.8.4, SV-258025r926062_rule

Description
To activate the locking delay of the screensaver in the GNOME3 desktop when the screensaver is activated, add or set lock-delay to uint32 0 in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/screensaver]
lock-delay=uint32 0
After the settings have been set, run dconf update.
Rationale
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to logout because of the temporary nature of the absense.
Enable GNOME3 Screensaver Lock After Idle Periodxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled mediumCCE-89302-4

Enable GNOME3 Screensaver Lock After Idle Period

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_lock_enabled
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89302-4

References:  1, 12, 15, 16, 5.5.5, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000056, CCI-000058, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), PR.AC-7, FMT_MOF_EXT.1, Req-8.1.8, 8.2.8, SRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011, RHEL-09-271060, RHEL-09-271055, SV-258022r926053_rule, SV-258021r926050_rule

Description
To activate locking of the screensaver in the GNOME3 desktop when it is activated, add or set lock-enabled to true in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/screensaver]
lock-enabled=true
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/lock-enabled
After the settings have been set, run dconf update.
Rationale
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to logout because of the temporary nature of the absense.
Implement Blank Screensaverxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank mediumCCE-88733-1

Implement Blank Screensaver

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_mode_blank
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88733-1

References:  1, 12, 15, 16, 5.5.5, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-11(1), CM-6(a), AC-11(1).1, PR.AC-7, FMT_MOF_EXT.1, Req-8.1.8, 8.2.8, SRG-OS-000031-GPOS-00012, RHEL-09-271085, SV-258027r926068_rule

Description
To set the screensaver mode in the GNOME3 desktop to a blank screen, add or set picture-uri to string '' in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/desktop/screensaver]
picture-uri=string ''
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/picture-uri
After the settings have been set, run dconf update.
Rationale
Setting the screensaver mode to blank-only conceals the contents of the display from passersby.
Ensure Users Cannot Change GNOME3 Screensaver Settingsxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_user_locks mediumCCE-87491-7

Ensure Users Cannot Change GNOME3 Screensaver Settings

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_screensaver_user_locks
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87491-7

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000057, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012, RHEL-09-271080, 1.8.5, SV-258026r926065_rule

Description
If not already configured, ensure that users cannot change GNOME3 screensaver lock settings by adding /org/gnome/desktop/screensaver/lock-delay to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/lock-delay
After the settings have been set, run dconf update.
Rationale
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME desktops can be configured to identify when a user's session has idled and take action to initiate the session lock. As such, users should not be allowed to change session settings.
Ensure Users Cannot Change GNOME3 Session Idle Settingsxccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks mediumCCE-85971-0

Ensure Users Cannot Change GNOME3 Session Idle Settings

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_session_idle_user_locks
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85971-0

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000057, CCI-000060, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), PR.AC-7, FMT_MOF_EXT.1, Req-8.1.8, 8.2.8, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012, RHEL-09-271070, 1.8.5, SV-258024r926059_rule

Description
If not already configured, ensure that users cannot change GNOME3 session idle settings by adding /org/gnome/desktop/session/idle-delay to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/session/idle-delay
After the settings have been set, run dconf update.
Rationale
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME desktops can be configured to identify when a user's session has idled and take action to initiate the session lock. As such, users should not be allowed to change session settings.
Disable Ctrl-Alt-Del Reboot Key Sequence in GNOME3xccdf_org.ssgproject.content_rule_dconf_gnome_disable_ctrlaltdel_reboot highCCE-88653-1

Disable Ctrl-Alt-Del Reboot Key Sequence in GNOME3

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_disable_ctrlaltdel_reboot
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-88653-1

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.2, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), CM-7(b), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-271105, RHEL-09-271110, SV-258031r926080_rule, SV-258032r926083_rule

Description
By default, GNOME will reboot the system if the Ctrl-Alt-Del key sequence is pressed.

To configure the system to ignore the Ctrl-Alt-Del key sequence from the Graphical User Interface (GUI) instead of rebooting the system, add or set logout to '' in /etc/dconf/db/local.d/00-security-settings. For example:
[org/gnome/settings-daemon/plugins/media-keys]
logout=''
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/settings-daemon/plugins/media-keys/logout
After the settings have been set, run dconf update.
Rationale
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Make sure that the dconf databases are up-to-date with regards to respective keyfilesxccdf_org.ssgproject.content_rule_dconf_db_up_to_date highCCE-87295-2

Make sure that the dconf databases are up-to-date with regards to respective keyfiles

Rule IDxccdf_org.ssgproject.content_rule_dconf_db_up_to_date
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:24+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-87295-2

References:  A.11.SEC-RHEL4, 164.308(a)(1)(ii)(B), 164.308(a)(5)(ii)(A), Req-6.2, 6.3.3, SRG-OS-000480-GPOS-00227, RHEL-09-271090, 1.8.2, SV-258028r926071_rule

Description
By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by the
dconf update
command. More specifically, content present in the following directories:
/etc/dconf/db/distro.d
/etc/dconf/db/local.d
Rationale
Unlike text-based keyfiles, the binary database is impossible to check by OVAL. Therefore, in order to evaluate dconf configuration, both have to be true at the same time - configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.
Install sudo Packagexccdf_org.ssgproject.content_rule_package_sudo_installed mediumCCE-83523-1

Install sudo Package

Rule IDxccdf_org.ssgproject.content_rule_package_sudo_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_sudo_installed:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83523-1

References:  BP28(R19), 1382, 1384, 1386, CM-6(a), FMT_MOF_EXT.1, 10.2.1.5, SRG-OS-000324-GPOS-00125, RHEL-09-432010, 5.3.1, SV-258083r926236_rule

Description
The sudo package can be installed with the following command:
$ sudo dnf install sudo
Rationale
sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.
OVAL test results details

package sudo is installed  oval:ssg-test_package_sudo_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
sudox86_64(none)9.el91.9.5p20:1.9.5p2-9.el9199e2f91fd431d51sudo-0:1.9.5p2-9.el9.x86_64
Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticatexccdf_org.ssgproject.content_rule_sudo_remove_no_authenticate mediumCCE-83544-7

Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate

Rule IDxccdf_org.ssgproject.content_rule_sudo_remove_no_authenticate
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sudo_remove_no_authenticate:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83544-7

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, RHEL-09-432025, SV-258086r926245_rule

Description
The sudo !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the !authenticate option does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
OVAL test results details

!authenticate does not exist in /etc/sudoers  oval:ssg-test_no_authenticate_etc_sudoers:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_authenticate_etc_sudoers:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/sudoers^(?!#).*[\s]+\!authenticate.*$1

!authenticate does not exist in /etc/sudoers.d  oval:ssg-test_no_authenticate_etc_sudoers_d:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_authenticate_etc_sudoers_d:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/sudoers.d^.*$^(?!#).*[\s]+\!authenticate.*$1
Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWDxccdf_org.ssgproject.content_rule_sudo_remove_nopasswd mediumCCE-83536-3

Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD

Rule IDxccdf_org.ssgproject.content_rule_sudo_remove_nopasswd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sudo_remove_nopasswd:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83536-3

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, RHEL-09-611085, SV-258106r926305_rule

Description
The sudo NOPASSWD tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the NOPASSWD tag does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
OVAL test results details

NOPASSWD does not exist /etc/sudoers  oval:ssg-test_nopasswd_etc_sudoers:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_nopasswd_etc_sudoers:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/sudoers^(?!#).*[\s]+NOPASSWD[\s]*\:.*$1

NOPASSWD does not exist in /etc/sudoers.d  oval:ssg-test_nopasswd_etc_sudoers_d:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_nopasswd_etc_sudoers_d:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/sudoers.d^.*$^(?!#).*[\s]+NOPASSWD[\s]*\:.*$1
Require Re-Authentication When Using the sudo Commandxccdf_org.ssgproject.content_rule_sudo_require_reauthentication mediumCCE-90029-0

Require Re-Authentication When Using the sudo Command

Rule IDxccdf_org.ssgproject.content_rule_sudo_require_reauthentication
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sudo_require_reauthentication:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90029-0

References:  A.5.SEC-RHEL2, CCI-002038, IA-11, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, RHEL-09-432015, 5.3.5, 5.3.6, SV-258084r926239_rule

Description
The sudo timestamp_timeout tag sets the amount of time sudo password prompt waits. The default timestamp_timeout value is 5 minutes. The timestamp_timeout should be configured by making sure that the timestamp_timeout tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/. If the value is set to an integer less than 0, the user's time stamp will not expire and the user will not have to re-authenticate for privileged actions until the user's session is terminated.
Rationale
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

var_sudo_timestamp_timeout='5'


if grep -Px '^[\s]*Defaults.*timestamp_timeout[\s]*=.*' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -Ei "/^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=.*/d" {} \;
fi

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults.*timestamp_timeout[\s]*=[\s]*[-]?\w+.*$' /etc/sudoers; then
        # sudoers file doesn't define Option timestamp_timeout
        echo "Defaults timestamp_timeout=${var_sudo_timestamp_timeout}" >> /etc/sudoers
    else
        # sudoers file defines Option timestamp_timeout, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*timestamp_timeout[\s]*=[\s]*${var_sudo_timestamp_timeout}.*$" /etc/sudoers; then
            
            sed -Ei "s/(^[[:blank:]]*Defaults.*timestamp_timeout[[:blank:]]*=)[[:blank:]]*[-]?\w+(.*$)/\1${var_sudo_timestamp_timeout}\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90029-0
  - DISA-STIG-RHEL-09-432015
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication
- name: XCCDF Value var_sudo_timestamp_timeout # promote to variable
  set_fact:
    var_sudo_timestamp_timeout: !!str 5
  tags:
    - always

- name: Find out if /etc/sudoers.d/* files contain 'Defaults timestamp_timeout' to
    be deduplicated
  find:
    path: /etc/sudoers.d
    patterns: '*'
    contains: ^[\s]*Defaults\s.*\btimestamp_timeout[\s]*=.*
  register: sudoers_d_defaults_timestamp_timeout
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-90029-0
  - DISA-STIG-RHEL-09-432015
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Remove found occurrences of 'Defaults timestamp_timeout' from /etc/sudoers.d/*
    files
  lineinfile:
    path: '{{ item.path }}'
    regexp: ^[\s]*Defaults\s.*\btimestamp_timeout[\s]*=.*
    state: absent
  with_items: '{{ sudoers_d_defaults_timestamp_timeout.files }}'
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-90029-0
  - DISA-STIG-RHEL-09-432015
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Ensure timestamp_timeout is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\btimestamp_timeout[\s]*=[\s]*[-]?\w+\b(.*)$
    line: Defaults \1timestamp_timeout={{ var_sudo_timestamp_timeout }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_timestamp_timeout_option
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-90029-0
  - DISA-STIG-RHEL-09-432015
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication

- name: Enable timestamp_timeout option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults timestamp_timeout={{ var_sudo_timestamp_timeout }}
    validate: /usr/sbin/visudo -cf %s
  when:
  - '"sudo" in ansible_facts.packages'
  - edit_sudoers_timestamp_timeout_option is defined and not edit_sudoers_timestamp_timeout_option.changed
  tags:
  - CCE-90029-0
  - DISA-STIG-RHEL-09-432015
  - NIST-800-53-IA-11
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_require_reauthentication
OVAL test results details

check correct configuration in /etc/sudoers  oval:ssg-test_sudo_timestamp_timeout:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sudo_timestamp_timeout:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\/etc\/(sudoers|sudoers\.d\/.*)$^[\s]*Defaults[\s]+timestamp_timeout[\s]*=\s*[+]?(\d*\.\d+|\d+\.\d*|\d+)$1

check correct configuration in /etc/sudoers  oval:ssg-test_sudo_timestamp_timeout_no_signs:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sudo_timestamp_timeout_no_signs:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\/etc\/(sudoers|sudoers\.d\/.*)$^[\s]*Defaults[\s]+timestamp_timeout[\s]*=\s*[\-](\d*\.\d+|\d+\.\d*|\d+)$1
The operating system must restrict privilege elevation to authorized personnelxccdf_org.ssgproject.content_rule_sudo_restrict_privilege_elevation_to_authorized mediumCCE-83525-6

The operating system must restrict privilege elevation to authorized personnel

Rule IDxccdf_org.ssgproject.content_rule_sudo_restrict_privilege_elevation_to_authorized
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sudo_restrict_privilege_elevation_to_authorized:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83525-6

References:  CCI-000366, CM-6(b), CM-6(iv), SRG-OS-000480-GPOS-00227, RHEL-09-432030, SV-258087r926248_rule

Description
The sudo command allows a user to execute programs with elevated (administrator) privileges. It prompts the user for their password and confirms your request to execute a command by checking a file, called sudoers. Restrict privileged actions by removing the following entries from the sudoers file: ALL ALL=(ALL) ALL ALL ALL=(ALL:ALL) ALL
Rationale
If the "sudoers" file is not configured correctly, any user defined on the system can initiate privileged actions on the target system.
Warnings
warning  This rule doesn't come with a remediation, as the exact requirement allows exceptions, and removing lines from the sudoers file can make the system non-administrable.
OVAL test results details

Make sure that sudoers has restrictions on which users can run sudo  oval:ssg-test_not_all_users_can_sudo_to_users:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_sudoers_cfg_spec_all_users:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^\s*ALL\s+ALL\=\(ALL\)\s+ALL\s*$1

Make sure that sudoers has restrictions on which users can run sudo  oval:ssg-test_not_all_users_can_sudo_to_group:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_sudoers_cfg_spec_all_group:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^\s*ALL\s+ALL\=\(ALL\:ALL\)\s+ALL\s*1
Ensure invoking users password for privilege escalation when using sudoxccdf_org.ssgproject.content_rule_sudoers_validate_passwd mediumCCE-83529-8

Ensure invoking users password for privilege escalation when using sudo

Rule IDxccdf_org.ssgproject.content_rule_sudoers_validate_passwd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sudoers_validate_passwd:def:1
Time2024-01-08T16:20:24+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83529-8

References:  CCI-000366, CCI-002227, CM-6(b), CM-6.1(iv), SRG-OS-000480-GPOS-00227, RHEL-09-432020, SV-258085r926242_rule

Description
The sudoers security policy requires that users authenticate themselves before they can use sudo. When sudoers requires authentication, it validates the invoking user's credentials. The expected output for:
 sudo cvtsudoers -f sudoers /etc/sudoers | grep -E '^Defaults !?(rootpw|targetpw|runaspw)$' 
 Defaults !targetpw
      Defaults !rootpw
      Defaults !runaspw 
or if cvtsudoers not supported:
 sudo find /etc/sudoers /etc/sudoers.d \( \! -name '*~' -a \! -name '*.*' \) -exec grep -E --with-filename '^[[:blank:]]*Defaults[[:blank:]](.*[[:blank:]])?!?\b(rootpw|targetpw|runaspw)' -- {} \; 
 /etc/sudoers:Defaults !targetpw
      /etc/sudoers:Defaults !rootpw
      /etc/sudoers:Defaults !runaspw 
Rationale
If the rootpw, targetpw, or runaspw flags are defined and not disabled, by default the operating system will prompt the invoking user for the "root" user password.

# Remediation is applicable only in certain platforms
if rpm --quiet -q sudo; then

if grep -x '^Defaults targetpw$' /etc/sudoers; then
    sed -i "/Defaults targetpw/d" /etc/sudoers \;
fi
if grep -x '^Defaults targetpw$' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -i "/Defaults targetpw/d" {} \;
fi
if grep -x '^Defaults rootpw$' /etc/sudoers; then
    sed -i "/Defaults rootpw/d" /etc/sudoers \;
fi
if grep -x '^Defaults rootpw$' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -i "/Defaults rootpw/d" {} \;
fi
if grep -x '^Defaults runaspw$' /etc/sudoers; then
    sed -i "/Defaults runaspw/d" /etc/sudoers \;
fi
if grep -x '^Defaults runaspw$' /etc/sudoers.d/*; then
    find /etc/sudoers.d/ -type f -exec sed -i "/Defaults runaspw/d" {} \;
fi

if [ -e "/etc/sudoers" ] ; then
    
    LC_ALL=C sed -i "/Defaults !targetpw/d" "/etc/sudoers"
else
    touch "/etc/sudoers"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/sudoers"

cp "/etc/sudoers" "/etc/sudoers.bak"
# Insert at the end of the file
printf '%s\n' "Defaults !targetpw" >> "/etc/sudoers"
# Clean up after ourselves.
rm "/etc/sudoers.bak"
if [ -e "/etc/sudoers" ] ; then
    
    LC_ALL=C sed -i "/Defaults !rootpw/d" "/etc/sudoers"
else
    touch "/etc/sudoers"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/sudoers"

cp "/etc/sudoers" "/etc/sudoers.bak"
# Insert at the end of the file
printf '%s\n' "Defaults !rootpw" >> "/etc/sudoers"
# Clean up after ourselves.
rm "/etc/sudoers.bak"
if [ -e "/etc/sudoers" ] ; then
    
    LC_ALL=C sed -i "/Defaults !runaspw/d" "/etc/sudoers"
else
    touch "/etc/sudoers"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/sudoers"

cp "/etc/sudoers" "/etc/sudoers.bak"
# Insert at the end of the file
printf '%s\n' "Defaults !runaspw" >> "/etc/sudoers"
# Clean up after ourselves.
rm "/etc/sudoers.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Find out if /etc/sudoers.d/* files contain Defaults targetpw to be deduplicated
  find:
    path: /etc/sudoers.d
    patterns: '*'
    contains: ^Defaults targetpw$
  register: sudoers_d_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove found occurrences of Defaults targetpw from /etc/sudoers.d/* files
  lineinfile:
    path: '{{ item.path }}'
    regexp: ^Defaults targetpw$
    state: absent
  with_items: '{{ sudoers_d_defaults.files }}'
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Find out if /etc/sudoers.d/* files contain Defaults rootpw to be deduplicated
  find:
    path: /etc/sudoers.d
    patterns: '*'
    contains: ^Defaults rootpw$
  register: sudoers_d_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove found occurrences of Defaults rootpw from /etc/sudoers.d/* files
  lineinfile:
    path: '{{ item.path }}'
    regexp: ^Defaults rootpw$
    state: absent
  with_items: '{{ sudoers_d_defaults.files }}'
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Find out if /etc/sudoers.d/* files contain Defaults runaspw to be deduplicated
  find:
    path: /etc/sudoers.d
    patterns: '*'
    contains: ^Defaults runaspw$
  register: sudoers_d_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove found occurrences of Defaults runaspw from /etc/sudoers.d/* files
  lineinfile:
    path: '{{ item.path }}'
    regexp: ^Defaults runaspw$
    state: absent
  with_items: '{{ sudoers_d_defaults.files }}'
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove any ocurrences of Defaults targetpw in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^Defaults targetpw$
    validate: /usr/sbin/visudo -cf %s
    state: absent
  register: sudoers_file_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove any ocurrences of Defaults rootpw in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^Defaults rootpw$
    validate: /usr/sbin/visudo -cf %s
    state: absent
  register: sudoers_file_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Remove any ocurrences of Defaults runaspw in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^Defaults runaspw$
    validate: /usr/sbin/visudo -cf %s
    state: absent
  register: sudoers_file_defaults
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Check for duplicate values
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !targetpw$
    state: absent
  check_mode: true
  changed_when: false
  register: dupes
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Deduplicate values from /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !targetpw$
    state: absent
  when:
  - '"sudo" in ansible_facts.packages'
  - dupes.found is defined and dupes.found > 1
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Insert correct line into /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !targetpw$
    line: Defaults !targetpw
    state: present
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Check for duplicate values
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !rootpw$
    state: absent
  check_mode: true
  changed_when: false
  register: dupes
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Deduplicate values from /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !rootpw$
    state: absent
  when:
  - '"sudo" in ansible_facts.packages'
  - dupes.found is defined and dupes.found > 1
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Insert correct line into /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !rootpw$
    line: Defaults !rootpw
    state: present
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Check for duplicate values
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !runaspw$
    state: absent
  check_mode: true
  changed_when: false
  register: dupes
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Deduplicate values from /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !runaspw$
    state: absent
  when:
  - '"sudo" in ansible_facts.packages'
  - dupes.found is defined and dupes.found > 1
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd

- name: Insert correct line into /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    create: false
    regexp: ^Defaults !runaspw$
    line: Defaults !runaspw
    state: present
  when: '"sudo" in ansible_facts.packages'
  tags:
  - CCE-83529-8
  - DISA-STIG-RHEL-09-432020
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudoers_validate_passwd
OVAL test results details

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_targetpw_config:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_targetpw_config:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults !targetpw$\r?\n1

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_rootpw_config:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_rootpw_config:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults !rootpw$\r?\n1

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_runaspw_config:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_runaspw_config:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults !runaspw$\r?\n1

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_targetpw_not_defined:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_targetpw_not_defined:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults targetpw$\r?\n1

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_rootpw_not_defined:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_rootpw_not_defined:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults rootpw$\r?\n1

Ensure invoking user's password for privilege escalation when using sudo  oval:ssg-test_sudoers_runaspw_not_defined:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_test_sudoers_runaspw_not_defined:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/sudoers(\.d/.*)?$^Defaults runaspw$\r?\n1
Ensure gnutls-utils is installedxccdf_org.ssgproject.content_rule_package_gnutls-utils_installed mediumCCE-83494-5

Ensure gnutls-utils is installed

Rule IDxccdf_org.ssgproject.content_rule_package_gnutls-utils_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_gnutls-utils_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83494-5

References:  FIA_X509_EXT.1, FIA_X509_EXT.2, SRG-OS-000480-GPOS-00227, RHEL-09-215080, SV-257839r925504_rule

Description
The gnutls-utils package can be installed with the following command:
$ sudo dnf install gnutls-utils
Rationale
GnuTLS is a secure communications library implementing the SSL, TLS and DTLS protocols and technologies around them. It provides a simple C language application programming interface (API) to access the secure communications protocols as well as APIs to parse and write X.509, PKCS #12, OpenPGP and other required structures. This package contains command line TLS client and server and certificate manipulation tools.
OVAL test results details

package gnutls-utils is installed  oval:ssg-test_package_gnutls-utils_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
gnutls-utilsx86_64(none)23.el93.7.60:3.7.6-23.el9199e2f91fd431d51gnutls-utils-0:3.7.6-23.el9.x86_64
Ensure nss-tools is installedxccdf_org.ssgproject.content_rule_package_nss-tools_installed mediumCCE-89706-6

Ensure nss-tools is installed

Rule IDxccdf_org.ssgproject.content_rule_package_nss-tools_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_nss-tools_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89706-6

References:  FMT_SMF_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-215085, SV-257840r925507_rule

Description
The nss-tools package can be installed with the following command:
$ sudo dnf install nss-tools
Rationale
Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled client and server applications. Install the nss-tools package to install command-line tools to manipulate the NSS certificate and key database.
OVAL test results details

package nss-tools is installed  oval:ssg-test_package_nss-tools_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
nss-toolsx86_64(none)3.el9_23.90.00:3.90.0-3.el9_2199e2f91fd431d51nss-tools-0:3.90.0-3.el9_2.x86_64
Install rng-tools Packagexccdf_org.ssgproject.content_rule_package_rng-tools_installed lowCCE-83504-1

Install rng-tools Package

Rule IDxccdf_org.ssgproject.content_rule_package_rng-tools_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_rng-tools_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83504-1

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-215090, SV-257841r925510_rule

Description
The rng-tools package can be installed with the following command:
$ sudo dnf install rng-tools
Rationale
rng-tools provides hardware random number generator tools, such as those used in the formation of x509/PKI certificates.
OVAL test results details

package rng-tools is installed  oval:ssg-test_package_rng-tools_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
rng-toolsx86_64(none)1.el96.160:6.16-1.el9199e2f91fd431d51rng-tools-0:6.16-1.el9.x86_64
Install subscription-manager Packagexccdf_org.ssgproject.content_rule_package_subscription-manager_installed mediumCCE-83506-6

Install subscription-manager Package

Rule IDxccdf_org.ssgproject.content_rule_package_subscription-manager_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_subscription-manager_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83506-6

References:  0940, 1144, 1467, 1472, 1483, 1493, 1494, 1495, FPT_TUD_EXT.1, FPT_TUD_EXT.2, SRG-OS-000366-GPOS-00153, RHEL-09-215010, SV-257825r925462_rule

Description
The subscription-manager package can be installed with the following command:
$ sudo dnf install subscription-manager
Rationale
Red Hat Subscription Manager is a local service which tracks installed products and subscriptions on a local system to help manage subscription assignments. It communicates with the backend subscription service (the Customer Portal or an on-premise server such as Subscription Asset Manager) and works with content management tools such as . The package provides, among other things, plugins to interact with repositories and subscriptions from the Red Hat entitlement platform - the subscription-manager and product-id plugins.
OVAL test results details

package subscription-manager is installed  oval:ssg-test_package_subscription-manager_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
subscription-managerx86_64(none)1.el9_31.29.380:1.29.38-1.el9_3199e2f91fd431d51subscription-manager-0:1.29.38-1.el9_3.x86_64
Uninstall gssproxy Packagexccdf_org.ssgproject.content_rule_package_gssproxy_removed mediumCCE-83516-5

Uninstall gssproxy Package

Rule IDxccdf_org.ssgproject.content_rule_package_gssproxy_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_gssproxy_removed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83516-5

References:  CCI-000381, CCI-000366, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-215045, SV-257832r925483_rule

Description
The gssproxy package can be removed with the following command:
$ sudo dnf erase gssproxy
Rationale
gssproxy is a proxy for GSS API credential handling.
OVAL test results details

package gssproxy is removed  oval:ssg-test_package_gssproxy_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_gssproxy_removed:obj:1 of type rpminfo_object
Name
gssproxy
Uninstall iprutils Packagexccdf_org.ssgproject.content_rule_package_iprutils_removed mediumCCE-83519-9

Uninstall iprutils Package

Rule IDxccdf_org.ssgproject.content_rule_package_iprutils_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_iprutils_removed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83519-9

References:  CCI-000366, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-215050, SV-257833r925486_rule

Description
The iprutils package can be removed with the following command:
$ sudo dnf erase iprutils
Rationale
iprutils provides a suite of utlilities to manage and configure SCSI devices supported by the ipr SCSI storage device driver.
OVAL test results details

package iprutils is removed  oval:ssg-test_package_iprutils_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_iprutils_removed:obj:1 of type rpminfo_object
Name
iprutils
Uninstall tuned Packagexccdf_org.ssgproject.content_rule_package_tuned_removed mediumCCE-83521-5

Uninstall tuned Package

Rule IDxccdf_org.ssgproject.content_rule_package_tuned_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_tuned_removed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83521-5

References:  CCI-000366, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-215055, SV-257834r925489_rule

Description
The tuned package can be removed with the following command:
$ sudo dnf erase tuned
Rationale
tuned contains a daemon that tunes the system settings dynamically. It does so by monitoring the usage of several system components periodically. Based on that information, components will then be put into lower or higher power savings modes to adapt to the current usage.
OVAL test results details

package tuned is removed  oval:ssg-test_package_tuned_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_tuned_removed:obj:1 of type rpminfo_object
Name
tuned
Ensure dnf Removes Previous Package Versionsxccdf_org.ssgproject.content_rule_clean_components_post_updating lowCCE-83458-0

Ensure dnf Removes Previous Package Versions

Rule IDxccdf_org.ssgproject.content_rule_clean_components_post_updating
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:25+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83458-0

References:  18, 20, 4, APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02, 3.4.8, CCI-002617, 4.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3, SI-2(6), CM-11(a), CM-11(b), CM-6(a), ID.RA-1, PR.IP-12, SRG-OS-000437-GPOS-00194, RHEL-09-214035, SV-257824r925459_rule

Description
dnf should be configured to remove previous software components after new versions have been installed. To configure dnf to remove the previous software components after updating, set the clean_requirements_on_remove to 1 in /etc/dnf/dnf.conf.
Rationale
Previous versions of software components that are not removed from the information system after updates have been installed may be exploited by some adversaries.
Ensure gpgcheck Enabled In Main dnf Configurationxccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated highCCE-83457-2

Ensure gpgcheck Enabled In Main dnf Configuration

Rule IDxccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83457-2

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, 6.3.3, SRG-OS-000366-GPOS-00153, RHEL-09-214015, 1.2.2, SV-257820r925447_rule

Description
The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure dnf to check package signatures before installing them, ensure the following line appears in /etc/dnf/dnf.conf in the [main] section:
gpgcheck=1
Rationale
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Ensure gpgcheck Enabled for Local Packagesxccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages highCCE-83463-0

Ensure gpgcheck Enabled for Local Packages

Rule IDxccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83463-0

References:  BP28(R15), 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-11(a), CM-11(b), CM-6(a), CM-5(3), SA-12, SA-12(10), PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, SRG-OS-000366-GPOS-00153, RHEL-09-214020, SV-257821r925450_rule

Description
dnf should be configured to verify the signature(s) of local packages prior to installation. To configure dnf to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/dnf/dnf.conf.
Rationale
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Ensure gpgcheck Enabled for All dnf Package Repositoriesxccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled highCCE-83464-8

Ensure gpgcheck Enabled for All dnf Package Repositories

Rule IDxccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-ensure_gpgcheck_never_disabled:def:1
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83464-8

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, 6.3.3, SRG-OS-000366-GPOS-00153, RHEL-09-214025, SV-257822r925453_rule

Description
To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
OVAL test results details

check for existence of gpgcheck=0 in /etc/yum.repos.d/ files  oval:ssg-test_ensure_gpgcheck_never_disabled:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_ensure_gpgcheck_never_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/yum.repos.d.*^\s*gpgcheck\s*=\s*0\s*$1
Ensure Red Hat GPG Key Installedxccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed highCCE-84180-9

Ensure Red Hat GPG Key Installed

Rule IDxccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-ensure_redhat_gpgkey_installed:def:1
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84180-9

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CIP-003-8 R4.2, CIP-003-8 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, RHEL-09-214010, 1.2.1, SV-257819r925444_rule

Description
To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:
$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
Alternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Rationale
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.
OVAL test results details

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

installed OS part of unix family  oval:ssg-test_rhel9_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release is version 9  oval:ssg-test_rhel9:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
redhat-releasex86_64(none)0.5.el99.30:9.3-0.5.el9199e2f91fd431d51redhat-release-0:9.3-0.5.el9.x86_64

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

redhat-release-virtualization-host RPM package is installed  oval:ssg-test_rhvh4_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhvh4_version:obj:1 of type rpminfo_object
Name
redhat-release-virtualization-host

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

RHEVH base RHEL is version 9  oval:ssg-test_rhevh_rhel9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rhevh_rhel9_version:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/redhat-release^Red Hat Enterprise Linux release (\d)\.\d+$1

Red Hat release key package is installed  oval:ssg-test_package_gpgkey-fd431d51-4ae0493b_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
gpg-pubkey(none)(none)4ae0493bfd431d510:fd431d51-4ae0493b0gpg-pubkey-0:fd431d51-4ae0493b.(none)
gpg-pubkey(none)(none)6229229e5a6340b30:5a6340b3-6229229e0gpg-pubkey-0:5a6340b3-6229229e.(none)

Red Hat auxiliary key package is installed  oval:ssg-test_package_gpgkey-5a6340b3-6229229e_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
gpg-pubkey(none)(none)4ae0493bfd431d510:fd431d51-4ae0493b0gpg-pubkey-0:fd431d51-4ae0493b.(none)
gpg-pubkey(none)(none)6229229e5a6340b30:5a6340b3-6229229e0gpg-pubkey-0:5a6340b3-6229229e.(none)

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Check os-release ID  oval:ssg-test_centos9_name:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseID="rhel"

Check os-release ID  oval:ssg-test_centos9_name:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_name_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^ID="(\w+)"$1

Check os-release VERSION_ID  oval:ssg-test_centos9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_version_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)"$1

Check os-release VERSION_ID  oval:ssg-test_centos9_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_version_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)"$1

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  true

Following items have been found on the system:
Family
unix

Test installed OS is part of the unix family  oval:ssg-test_unix_family:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-object_unix_family:obj:1 of type family_object

Check os-release ID  oval:ssg-test_centos9_name:tst:1  false

Following items have been found on the system:
PathContent
/etc/os-releaseID="rhel"

Check os-release ID  oval:ssg-test_centos9_name:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_name_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^ID="(\w+)"$1

Check os-release VERSION_ID  oval:ssg-test_centos9_version:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_version_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)"$1

Check os-release VERSION_ID  oval:ssg-test_centos9_version:tst:1  not evaluated

No items have been found conforming to the following objects:
Object oval:ssg-obj_version_centos9:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/os-release^VERSION_ID="(\d)"$1

CentOS9 key package is installed  oval:ssg-test_package_gpgkey-8483c65d-5ccc5b19_installed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
gpg-pubkey(none)(none)4ae0493bfd431d510:fd431d51-4ae0493b0gpg-pubkey-0:fd431d51-4ae0493b.(none)
gpg-pubkey(none)(none)6229229e5a6340b30:5a6340b3-6229229e0gpg-pubkey-0:5a6340b3-6229229e.(none)
Ensure Software Patches Installedxccdf_org.ssgproject.content_rule_security_patches_up_to_date mediumCCE-84185-8

Ensure Software Patches Installed

Rule IDxccdf_org.ssgproject.content_rule_security_patches_up_to_date
Result
notchecked
Multi-check ruleyes
OVAL Definition ID
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84185-8

References:  BP28(R08), 18, 20, 4, 5.10.4.1, APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02, CCI-000366, CCI-001227, 4.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3, SI-2(5), SI-2(c), CM-6(a), ID.RA-1, PR.IP-12, FMT_MOF_EXT.1, Req-6.2, 6.3.3, SRG-OS-000480-GPOS-00227, RHEL-09-211015, 1.9, SV-257778r925321_rule

Description


NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.
Rationale
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
Warnings
warning  The OVAL feed of Red Hat Enterprise Linux 9 is not a XML file, which may not be understood by all scanners.
Evaluation messages
info 
None of the check-content-ref elements was resolvable.
Enable GNOME3 Login Warning Bannerxccdf_org.ssgproject.content_rule_dconf_gnome_banner_enabled mediumCCE-87599-7

Enable GNOME3 Login Warning Banner

Rule IDxccdf_org.ssgproject.content_rule_dconf_gnome_banner_enabled
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87599-7

References:  A.11.SEC-RHEL4, 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(b), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, RHEL-09-271010, RHEL-09-271015, 1.8.2, SV-258012r926023_rule, SV-258013r926026_rule

Description
In the default graphical environment, displaying a login warning banner in the GNOME Display Manager's login screen can be enabled on the login screen by setting banner-message-enable to true.

To enable, add or edit banner-message-enable to /etc/dconf/db/distro.d/00-security-settings. For example:
[org/gnome/login-screen]
banner-message-enable=true
Once the setting has been added, add a lock to /etc/dconf/db/distro.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/login-screen/banner-message-enable
After the settings have been set, run dconf update. The banner text must also be set.
Rationale
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

For U.S. Government systems, system use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Modify the System Login Bannerxccdf_org.ssgproject.content_rule_banner_etc_issue mediumCCE-83557-9

Modify the System Login Banner

Rule IDxccdf_org.ssgproject.content_rule_banner_etc_issue
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-banner_etc_issue:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83557-9

References:  A.11.SEC-RHEL4, 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, RHEL-09-211020, 1.7.2, SV-257779r925324_rule

Description
To configure the system login banner edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.
Rationale
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

login_banner_text='^(You[\s\n]+are[\s\n]+accessing[\s\n]+a[\s\n]+U\.S\.[\s\n]+Government[\s\n]+\(USG\)[\s\n]+Information[\s\n]+System[\s\n]+\(IS\)[\s\n]+that[\s\n]+is[\s\n]+provided[\s\n]+for[\s\n]+USG\-authorized[\s\n]+use[\s\n]+only\.[\s\n]+By[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+\(which[\s\n]+includes[\s\n]+any[\s\n]+device[\s\n]+attached[\s\n]+to[\s\n]+this[\s\n]+IS\),[\s\n]+you[\s\n]+consent[\s\n]+to[\s\n]+the[\s\n]+following[\s\n]+conditions\:(?:[\n]+|(?:\\n)+)\-The[\s\n]+USG[\s\n]+routinely[\s\n]+intercepts[\s\n]+and[\s\n]+monitors[\s\n]+communications[\s\n]+on[\s\n]+this[\s\n]+IS[\s\n]+for[\s\n]+purposes[\s\n]+including,[\s\n]+but[\s\n]+not[\s\n]+limited[\s\n]+to,[\s\n]+penetration[\s\n]+testing,[\s\n]+COMSEC[\s\n]+monitoring,[\s\n]+network[\s\n]+operations[\s\n]+and[\s\n]+defense,[\s\n]+personnel[\s\n]+misconduct[\s\n]+\(PM\),[\s\n]+law[\s\n]+enforcement[\s\n]+\(LE\),[\s\n]+and[\s\n]+counterintelligence[\s\n]+\(CI\)[\s\n]+investigations\.(?:[\n]+|(?:\\n)+)\-At[\s\n]+any[\s\n]+time,[\s\n]+the[\s\n]+USG[\s\n]+may[\s\n]+inspect[\s\n]+and[\s\n]+seize[\s\n]+data[\s\n]+stored[\s\n]+on[\s\n]+this[\s\n]+IS\.(?:[\n]+|(?:\\n)+)\-Communications[\s\n]+using,[\s\n]+or[\s\n]+data[\s\n]+stored[\s\n]+on,[\s\n]+this[\s\n]+IS[\s\n]+are[\s\n]+not[\s\n]+private,[\s\n]+are[\s\n]+subject[\s\n]+to[\s\n]+routine[\s\n]+monitoring,[\s\n]+interception,[\s\n]+and[\s\n]+search,[\s\n]+and[\s\n]+may[\s\n]+be[\s\n]+disclosed[\s\n]+or[\s\n]+used[\s\n]+for[\s\n]+any[\s\n]+USG\-authorized[\s\n]+purpose\.(?:[\n]+|(?:\\n)+)\-This[\s\n]+IS[\s\n]+includes[\s\n]+security[\s\n]+measures[\s\n]+\(e\.g\.,[\s\n]+authentication[\s\n]+and[\s\n]+access[\s\n]+controls\)[\s\n]+to[\s\n]+protect[\s\n]+USG[\s\n]+interests\-\-not[\s\n]+for[\s\n]+your[\s\n]+personal[\s\n]+benefit[\s\n]+or[\s\n]+privacy\.(?:[\n]+|(?:\\n)+)\-Notwithstanding[\s\n]+the[\s\n]+above,[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+does[\s\n]+not[\s\n]+constitute[\s\n]+consent[\s\n]+to[\s\n]+PM,[\s\n]+LE[\s\n]+or[\s\n]+CI[\s\n]+investigative[\s\n]+searching[\s\n]+or[\s\n]+monitoring[\s\n]+of[\s\n]+the[\s\n]+content[\s\n]+of[\s\n]+privileged[\s\n]+communications,[\s\n]+or[\s\n]+work[\s\n]+product,[\s\n]+related[\s\n]+to[\s\n]+personal[\s\n]+representation[\s\n]+or[\s\n]+services[\s\n]+by[\s\n]+attorneys,[\s\n]+psychotherapists,[\s\n]+or[\s\n]+clergy,[\s\n]+and[\s\n]+their[\s\n]+assistants\.[\s\n]+Such[\s\n]+communications[\s\n]+and[\s\n]+work[\s\n]+product[\s\n]+are[\s\n]+private[\s\n]+and[\s\n]+confidential\.[\s\n]+See[\s\n]+User[\s\n]+Agreement[\s\n]+for[\s\n]+details\.|I've[\s\n]+read[\s\n]+\&[\s\n]+consent[\s\n]+to[\s\n]+terms[\s\n]+in[\s\n]+IS[\s\n]+user[\s\n]+agreem't\.)$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
formatted=$(echo "$login_banner_text" | fold -sw 80)
cat <<EOF >/etc/issue
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:unknown
- name: XCCDF Value login_banner_text # promote to variable
  set_fact:
    login_banner_text: !!str ^(You[\s\n]+are[\s\n]+accessing[\s\n]+a[\s\n]+U\.S\.[\s\n]+Government[\s\n]+\(USG\)[\s\n]+Information[\s\n]+System[\s\n]+\(IS\)[\s\n]+that[\s\n]+is[\s\n]+provided[\s\n]+for[\s\n]+USG\-authorized[\s\n]+use[\s\n]+only\.[\s\n]+By[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+\(which[\s\n]+includes[\s\n]+any[\s\n]+device[\s\n]+attached[\s\n]+to[\s\n]+this[\s\n]+IS\),[\s\n]+you[\s\n]+consent[\s\n]+to[\s\n]+the[\s\n]+following[\s\n]+conditions\:(?:[\n]+|(?:\\n)+)\-The[\s\n]+USG[\s\n]+routinely[\s\n]+intercepts[\s\n]+and[\s\n]+monitors[\s\n]+communications[\s\n]+on[\s\n]+this[\s\n]+IS[\s\n]+for[\s\n]+purposes[\s\n]+including,[\s\n]+but[\s\n]+not[\s\n]+limited[\s\n]+to,[\s\n]+penetration[\s\n]+testing,[\s\n]+COMSEC[\s\n]+monitoring,[\s\n]+network[\s\n]+operations[\s\n]+and[\s\n]+defense,[\s\n]+personnel[\s\n]+misconduct[\s\n]+\(PM\),[\s\n]+law[\s\n]+enforcement[\s\n]+\(LE\),[\s\n]+and[\s\n]+counterintelligence[\s\n]+\(CI\)[\s\n]+investigations\.(?:[\n]+|(?:\\n)+)\-At[\s\n]+any[\s\n]+time,[\s\n]+the[\s\n]+USG[\s\n]+may[\s\n]+inspect[\s\n]+and[\s\n]+seize[\s\n]+data[\s\n]+stored[\s\n]+on[\s\n]+this[\s\n]+IS\.(?:[\n]+|(?:\\n)+)\-Communications[\s\n]+using,[\s\n]+or[\s\n]+data[\s\n]+stored[\s\n]+on,[\s\n]+this[\s\n]+IS[\s\n]+are[\s\n]+not[\s\n]+private,[\s\n]+are[\s\n]+subject[\s\n]+to[\s\n]+routine[\s\n]+monitoring,[\s\n]+interception,[\s\n]+and[\s\n]+search,[\s\n]+and[\s\n]+may[\s\n]+be[\s\n]+disclosed[\s\n]+or[\s\n]+used[\s\n]+for[\s\n]+any[\s\n]+USG\-authorized[\s\n]+purpose\.(?:[\n]+|(?:\\n)+)\-This[\s\n]+IS[\s\n]+includes[\s\n]+security[\s\n]+measures[\s\n]+\(e\.g\.,[\s\n]+authentication[\s\n]+and[\s\n]+access[\s\n]+controls\)[\s\n]+to[\s\n]+protect[\s\n]+USG[\s\n]+interests\-\-not[\s\n]+for[\s\n]+your[\s\n]+personal[\s\n]+benefit[\s\n]+or[\s\n]+privacy\.(?:[\n]+|(?:\\n)+)\-Notwithstanding[\s\n]+the[\s\n]+above,[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+does[\s\n]+not[\s\n]+constitute[\s\n]+consent[\s\n]+to[\s\n]+PM,[\s\n]+LE[\s\n]+or[\s\n]+CI[\s\n]+investigative[\s\n]+searching[\s\n]+or[\s\n]+monitoring[\s\n]+of[\s\n]+the[\s\n]+content[\s\n]+of[\s\n]+privileged[\s\n]+communications,[\s\n]+or[\s\n]+work[\s\n]+product,[\s\n]+related[\s\n]+to[\s\n]+personal[\s\n]+representation[\s\n]+or[\s\n]+services[\s\n]+by[\s\n]+attorneys,[\s\n]+psychotherapists,[\s\n]+or[\s\n]+clergy,[\s\n]+and[\s\n]+their[\s\n]+assistants\.[\s\n]+Such[\s\n]+communications[\s\n]+and[\s\n]+work[\s\n]+product[\s\n]+are[\s\n]+private[\s\n]+and[\s\n]+confidential\.[\s\n]+See[\s\n]+User[\s\n]+Agreement[\s\n]+for[\s\n]+details\.|I've[\s\n]+read[\s\n]+\&[\s\n]+consent[\s\n]+to[\s\n]+terms[\s\n]+in[\s\n]+IS[\s\n]+user[\s\n]+agreem't\.)$
  tags:
    - always

- name: Modify the System Login Banner - Ensure Correct Banner
  copy:
    dest: /etc/issue
    content: '{{ login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83557-9
  - DISA-STIG-RHEL-09-211020
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - banner_etc_issue
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy
OVAL test results details

correct banner in /etc/issue  oval:ssg-test_banner_etc_issue:tst:1  false

Following items have been found on the system:
PathContent
/etc/issue\S Kernel \r on an \m
Limit Password Reuse: password-authxccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth mediumCCE-86354-8

Limit Password Reuse: password-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_password_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_pwhistory_remember_password_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86354-8

References:  1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(f), IA-5(1)(e), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.5, SRG-OS-000077-GPOS-00045, RHEL-09-611015, 5.5.3, SV-258092r926263_rule

Description
Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM module.

On systems with newer versions of authselect, the pam_pwhistory PAM module can be enabled via authselect feature:
authselect enable-feature with-pwhistory
Otherwise, it should be enabled using an authselect custom profile.

Newer systems also have the /etc/security/pwhistory.conf file for setting pam_pwhistory module options. This file should be used whenever available. Otherwise, the pam_pwhistory module options can be set in PAM files.

The value for remember option must be equal or greater than 5
Rationale
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
warning  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files. If a custom profile was created and used in the system before this authselect feature was available, the new feature can't be used with this custom profile and the remediation will fail. In this case, the custom profile should be recreated or manually updated.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/password-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/password-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/password-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/password-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/password-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/password-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/password-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/password-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/password-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/password-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/password-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: 'Limit Password Reuse: password-auth - Informative message based on the
      authselect integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: password-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: password-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ var_password_pam_remember_control_flag.split(",")[0]
        }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: password-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if /etc/pam.d/password-auth
        file is present'
      ansible.builtin.stat:
        path: /etc/pam.d/password-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: password-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/password-auth

      - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: password-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: 'Limit Password Reuse: password-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: password-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Check if any custom profile
            with the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: password-auth - Create an authselect custom
            profile based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: password-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: password-auth - Ensure the "remember" option
          from "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are
          applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: password-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: password-auth - Define the PAM file to be edited
      as a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/password-auth

  - name: 'Limit Password Reuse: password-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: password-auth - Ensure authselect custom profile
      is used if authselect is present'
    block:

    - name: 'Limit Password Reuse: password-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: password-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: password-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: password-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: password-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Get authselect current features
        to also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: password-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: password-auth - Restore the authselect features
        in the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: password-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: password-auth - Check if expected PAM module line
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: password-auth - Include or update the PAM module
      line in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: password-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: password-auth - Ensure the correct control for
        the required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: password-auth - Ensure the required PAM module
        line is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Check if the required PAM module
      option is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: password-auth - Ensure the "remember" PAM option
      for "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: password-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: password-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-86354-8
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611015
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_password_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

Check pam_pwhistory.so presence in /etc/pam.d/password-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_password_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_password_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
requisite
required
requisite,required
^\s*password\s+(?:requisite)\s+pam_pwhistory\.so.*$
^\s*password\s+(?:required)\s+pam_pwhistory\.so.*$
/etc/pam.d/password-auth1

Check remember parameter is present and correct in /etc/pam.d/password-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_password_auth_pamd:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_password_auth_pamd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
5
^\s*password\b.*\bpam_pwhistory\.so\b.*\bremember=([0-9]*).*$
/etc/pam.d/password-auth1

Check the absence of remember parameter in /etc/security/pwhistory.conf  oval:ssg-test_accounts_password_pam_pwhistory_remember_password_auth_no_pwhistory_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_password_auth_param_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\s*remember\s*=\s*([0-9]+)^/etc/security/pwhistory.conf$1

Check remember parameter is absent in /etc/pam.d/password-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_password_auth_no_pamd:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_password_auth_pamd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\s*password\b.*\bpam_pwhistory\.so\b.*\bremember=([0-9]*).*$/etc/pam.d/password-auth1

Check remember parameter is present and correct in /etc/security/pwhistory.conf  oval:ssg-test_accounts_password_pam_pwhistory_remember_password_auth_pwhistory_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_password_auth_param_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
5
^\s*remember\s*=\s*([0-9]+)
^/etc/security/pwhistory.conf$1
Limit Password Reuse: system-authxccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth mediumCCE-89176-2

Limit Password Reuse: system-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember_system_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_pwhistory_remember_system_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89176-2

References:  1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(f), IA-5(1)(e), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.5, SRG-OS-000077-GPOS-00045, RHEL-09-611020, 5.5.3, SV-258093r926266_rule

Description
Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM module.

On systems with newer versions of authselect, the pam_pwhistory PAM module can be enabled via authselect feature:
authselect enable-feature with-pwhistory
Otherwise, it should be enabled using an authselect custom profile.

Newer systems also have the /etc/security/pwhistory.conf file for setting pam_pwhistory module options. This file should be used whenever available. Otherwise, the pam_pwhistory module options can be set in PAM files.

The value for remember option must be equal or greater than 5
Rationale
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
warning  Newer versions of authselect contain an authselect feature to easily and properly enable pam_pwhistory.so module. If this feature is not yet available in your system, an authselect custom profile must be used to avoid integrity issues in PAM files.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_remember='5'
var_password_pam_remember_control_flag='requisite,required'


var_password_pam_remember_control_flag="$(echo $var_password_pam_remember_control_flag | cut -d \, -f 1)"

if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"$var_password_pam_remember_control_flag"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"$var_password_pam_remember_control_flag"' \2/' "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' "/etc/pam.d/system-auth"
            else
                echo 'password    '"$var_password_pam_remember_control_flag"'    pam_pwhistory.so' >> "/etc/pam.d/system-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_remember # promote to variable
  set_fact:
    var_password_pam_remember: !!str 5
  tags:
    - always
- name: XCCDF Value var_password_pam_remember_control_flag # promote to variable
  set_fact:
    var_password_pam_remember_control_flag: !!str requisite,required
  tags:
    - always

- name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
    tool'
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Collect the available authselect features'
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so using authselect
    feature'
  block:

  - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
      profile'
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: 'Limit Password Reuse: system-auth - Informative message based on the authselect
      integrity check result'
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: 'Limit Password Reuse: system-auth - Get authselect current features'
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: 'Limit Password Reuse: system-auth - Ensure "with-pwhistory" feature is
      enabled using authselect tool'
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Enable pam_pwhistory.so in appropriate
    PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+{{ var_password_pam_remember_control_flag.split(",")[0]
        }}\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1{{ var_password_pam_remember_control_flag.split(",")[0] }} \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    {{ var_password_pam_remember_control_flag.split(",")[0]
          }}    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - Check the presence of /etc/security/pwhistory.conf
    file'
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in /etc/security/pwhistory.conf file'
  block:

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter in /etc/security/pwhistory.conf'
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_remember }}
      state: present

  - name: 'Limit Password Reuse: system-auth - Ensure the pam_pwhistory.so remember
      parameter is removed from PAM files'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if /etc/pam.d/system-auth file
        is present'
      ansible.builtin.stat:
        path: /etc/pam.d/system-auth
      register: result_pam_file_present

    - name: 'Limit Password Reuse: system-auth - Check the proper remediation for
        the system'
      block:

      - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited
          as a local fact'
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/system-auth

      - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
          tool'
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile
          is used if authselect is present'
        block:

        - name: 'Limit Password Reuse: system-auth - Check integrity of authselect
            current profile'
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: 'Limit Password Reuse: system-auth - Informative message based on
            the authselect integrity check result'
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: 'Limit Password Reuse: system-auth - Define the current authselect
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
            profile as a local fact'
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Get authselect current features
            to also enable them in the custom profile'
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
            the same name was already created'
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
            based on the current profile'
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom
            profile is selected'
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: 'Limit Password Reuse: system-auth - Restore the authselect features
            in the custom profile'
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are
            applied'
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
            according to the custom authselect profile'
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: 'Limit Password Reuse: system-auth - Ensure the "remember" option from
          "pam_pwhistory.so" is not present in {{ pam_file_path }}'
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Limit Password Reuse: system-auth - pam_pwhistory.so parameters are configured
    in PAM files'
  block:

  - name: 'Limit Password Reuse: system-auth - Define the PAM file to be edited as
      a local fact'
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: 'Limit Password Reuse: system-auth - Check if system relies on authselect
      tool'
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: 'Limit Password Reuse: system-auth - Ensure authselect custom profile is
      used if authselect is present'
    block:

    - name: 'Limit Password Reuse: system-auth - Check integrity of authselect current
        profile'
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: 'Limit Password Reuse: system-auth - Informative message based on the
        authselect integrity check result'
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: 'Limit Password Reuse: system-auth - Get authselect current profile'
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: 'Limit Password Reuse: system-auth - Define the current authselect profile
        as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: 'Limit Password Reuse: system-auth - Define the new authselect custom
        profile as a local fact'
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Get authselect current features to
        also enable them in the custom profile'
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Check if any custom profile with
        the same name was already created'
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: 'Limit Password Reuse: system-auth - Create an authselect custom profile
        based on the current profile'
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Ensure the authselect custom profile
        is selected'
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: 'Limit Password Reuse: system-auth - Restore the authselect features in
        the custom profile'
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: 'Limit Password Reuse: system-auth - Change the PAM file to be edited
        according to the custom authselect profile'
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: 'Limit Password Reuse: system-auth - Check if expected PAM module line is
      present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: 'Limit Password Reuse: system-auth - Include or update the PAM module line
      in {{ pam_file_path }}'
    block:

    - name: 'Limit Password Reuse: system-auth - Check if required PAM module line
        is present in {{ pam_file_path }} with different control'
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: 'Limit Password Reuse: system-auth - Ensure the correct control for the
        required PAM module line in {{ pam_file_path }}'
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: 'Limit Password Reuse: system-auth - Ensure the required PAM module line
        is included in {{ pam_file_path }}'
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Check if the required PAM module option
      is present in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: 'Limit Password Reuse: system-auth - Ensure the "remember" PAM option for
      "pam_pwhistory.so" is included in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: 'Limit Password Reuse: system-auth - Ensure the required value for "remember"
      PAM option from "pam_pwhistory.so" in {{ pam_file_path }}'
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: 'Limit Password Reuse: system-auth - Ensure authselect changes are applied'
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-89176-2
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611020
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - accounts_password_pam_pwhistory_remember_system_auth
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

Check pam_pwhistory.so presence in /etc/pam.d/system-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_system_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_system_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
requisite
required
requisite,required
^\s*password\s+(?:requisite)\s+pam_pwhistory\.so.*$
^\s*password\s+(?:required)\s+pam_pwhistory\.so.*$
/etc/pam.d/system-auth1

Check remember parameter is present and correct in /etc/pam.d/system-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_system_auth_pamd:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_system_auth_pamd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
5
^\s*password\b.*\bpam_pwhistory\.so\b.*\bremember=([0-9]*).*$
/etc/pam.d/system-auth1

Check the absence of remember parameter in /etc/security/pwhistory.conf  oval:ssg-test_accounts_password_pam_pwhistory_remember_system_auth_no_pwhistory_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_system_auth_param_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\s*remember\s*=\s*([0-9]+)^/etc/security/pwhistory.conf$1

Check remember parameter is absent in /etc/pam.d/system-auth  oval:ssg-test_accounts_password_pam_pwhistory_remember_system_auth_no_pamd:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_system_auth_pamd:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\s*password\b.*\bpam_pwhistory\.so\b.*\bremember=([0-9]*).*$/etc/pam.d/system-auth1

Check remember parameter is present and correct in /etc/security/pwhistory.conf  oval:ssg-test_accounts_password_pam_pwhistory_remember_system_auth_pwhistory_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_pam_pwhistory_remember_system_auth_param_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
5
^\s*remember\s*=\s*([0-9]+)
^/etc/security/pwhistory.conf$1
Account Lockouts Must Be Loggedxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_audit mediumCCE-86100-5

Account Lockouts Must Be Logged

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_audit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_audit:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86100-5

References:  CCI-000044, AC-7 (a), SRG-OS-000021-GPOS-00005, RHEL-09-412045, SV-258070r926197_rule

Description
PAM faillock locks an account due to excessive password failures, this event must be logged.
Rationale
Without auditing of these events it may be harder or impossible to identify what an attacker did after an attack.


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*audit"
    line="audit"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\baudit\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\baudit\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*audit' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ audit/' "$pam_file"
        fi
    done
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Account Lockouts Must Be Logged - Check if system relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Remediation where authselect tool is present
  block:

  - name: Account Lockouts Must Be Logged - Check integrity of authselect current
      profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Account Lockouts Must Be Logged - Informative message based on the authselect
      integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Account Lockouts Must Be Logged - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Account Lockouts Must Be Logged - Ensure "with-faillock" feature is enabled
      using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when: result_authselect_present.stat.exists
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Remediation where authselect tool is not
    present
  block:

  - name: Account Lockouts Must Be Logged - Check if pam_faillock.so is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Account Lockouts Must Be Logged - Enable pam_faillock.so preauth editing
      PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Account Lockouts Must Be Logged - Enable pam_faillock.so authfail editing
      PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Account Lockouts Must Be Logged - Enable pam_faillock.so account section
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when: not result_authselect_present.stat.exists
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Ensure the pam_faillock.so audit parameter
    in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*audit
    line: audit
    state: present
  when: result_faillock_conf_check.stat.exists
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Ensure the pam_faillock.so audit parameter
    not in PAM files
  block:

  - name: Account Lockouts Must Be Logged - Check if /etc/pam.d/system-auth file is
      present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Account Lockouts Must Be Logged - Check the proper remediation for the system
    block:

    - name: Account Lockouts Must Be Logged - Define the PAM file to be edited as
        a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Account Lockouts Must Be Logged - Check if system relies on authselect
        tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Account Lockouts Must Be Logged - Ensure authselect custom profile is
        used if authselect is present
      block:

      - name: Account Lockouts Must Be Logged - Check integrity of authselect current
          profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Account Lockouts Must Be Logged - Informative message based on the authselect
          integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Account Lockouts Must Be Logged - Get authselect current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Account Lockouts Must Be Logged - Define the current authselect profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Account Lockouts Must Be Logged - Define the new authselect custom profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Account Lockouts Must Be Logged - Get authselect current features to
          also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Account Lockouts Must Be Logged - Check if any custom profile with the
          same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Account Lockouts Must Be Logged - Create an authselect custom profile
          based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Account Lockouts Must Be Logged - Ensure the authselect custom profile
          is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Account Lockouts Must Be Logged - Restore the authselect features in
          the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Account Lockouts Must Be Logged - Change the PAM file to be edited according
          to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Account Lockouts Must Be Logged - Ensure the "audit" option from "pam_faillock.so"
        is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\baudit\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Account Lockouts Must Be Logged - Check if /etc/pam.d/password-auth file
      is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Account Lockouts Must Be Logged - Check the proper remediation for the system
    block:

    - name: Account Lockouts Must Be Logged - Define the PAM file to be edited as
        a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Account Lockouts Must Be Logged - Check if system relies on authselect
        tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Account Lockouts Must Be Logged - Ensure authselect custom profile is
        used if authselect is present
      block:

      - name: Account Lockouts Must Be Logged - Check integrity of authselect current
          profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Account Lockouts Must Be Logged - Informative message based on the authselect
          integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Account Lockouts Must Be Logged - Get authselect current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Account Lockouts Must Be Logged - Define the current authselect profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Account Lockouts Must Be Logged - Define the new authselect custom profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Account Lockouts Must Be Logged - Get authselect current features to
          also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Account Lockouts Must Be Logged - Check if any custom profile with the
          same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Account Lockouts Must Be Logged - Create an authselect custom profile
          based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Account Lockouts Must Be Logged - Ensure the authselect custom profile
          is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Account Lockouts Must Be Logged - Restore the authselect features in
          the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Account Lockouts Must Be Logged - Change the PAM file to be edited according
          to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Account Lockouts Must Be Logged - Ensure the "audit" option from "pam_faillock.so"
        is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\baudit\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Account Lockouts Must Be Logged - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when: result_faillock_conf_check.stat.exists
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Account Lockouts Must Be Logged - Ensure the pam_faillock.so audit parameter
    in PAM files
  block:

  - name: Account Lockouts Must Be Logged - Check if pam_faillock.so audit parameter
      is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*audit
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_audit_parameter_is_present

  - name: Account Lockouts Must Be Logged - Ensure the inclusion of pam_faillock.so
      preauth audit parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 audit
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_audit_parameter_is_present.found == 0
  when: not result_faillock_conf_check.stat.exists
  tags:
  - CCE-86100-5
  - DISA-STIG-RHEL-09-412045
  - NIST-800-53-AC-7 (a)
  - accounts_passwords_pam_faillock_audit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Check the presence of audit parameter in system-auth  oval:ssg-test_pam_faillock_audit_parameter_system_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_audit_parameter_system_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]preauth[^\n#]*audit/etc/pam.d/system-auth1

Check the presence of audit parameter in password-auth  oval:ssg-test_pam_faillock_audit_parameter_password_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_audit_parameter_password_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]preauth[^\n#]*audit/etc/pam.d/password-auth1

Check the absence of audit parameter in /etc/security/faillock.conf  oval:ssg-test_pam_faillock_audit_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_faillock_audit_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/security/faillock.conf^\s*audit1

Check the absence of audit parameter in system-auth  oval:ssg-test_pam_faillock_audit_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_audit_parameter_system_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]preauth[^\n#]*audit/etc/pam.d/system-auth1

Check the absence of audit parameter in password-auth  oval:ssg-test_pam_faillock_audit_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_audit_parameter_password_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]preauth[^\n#]*audit/etc/pam.d/password-auth1

Check the expected audit value in in /etc/security/faillock.conf  oval:ssg-test_pam_faillock_audit_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_faillock_audit_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/security/faillock.conf^\s*audit1
Lock Accounts After Failed Password Attemptsxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny mediumCCE-83587-6

Lock Accounts After Failed Password Attempts

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_deny:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83587-6

References:  BP28(R18), A.30.SEC-RHEL1, 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, Req-8.1.6, 8.3.4, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-09-411075, 5.4.2, 5.5.2, SV-258054r926149_rule

Description
This rule configures the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. Ensure that the file /etc/security/faillock.conf contains the following entry: deny = <count> Where count should be less than or equal to 3 and greater than 0. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Rationale
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(deny\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_deny"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bdeny\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bdeny\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Lock Accounts After Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts After Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts After Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter not in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts After Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts After Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Lock Accounts After Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts After Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts After Failed Password Attempts - Informative message based
          on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts After Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Check if any custom profile
          with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts After Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts After Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts After Failed Password Attempts - Change the PAM file to
          be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts After Failed Password Attempts - Ensure the "deny" option
        from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdeny\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts After Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

  - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
      deny parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*deny
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_deny_parameter_is_present

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of pam_faillock.so
      authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found == 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0

  - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail deny parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83587-6
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411075
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_deny
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

No more than one pam_unix.so is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_system_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_system_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/system-auth$1

No more than one pam_unix.so is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_password_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_password_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_system_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_system_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_system_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_system_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_password_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_password_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_password_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_password_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/password-auth$1

Check the expected deny value in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_pamd_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
3
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*deny=([0-9]+)
^/etc/pam.d/system-auth$1

Check the expected deny value in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_pamd_password:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
3
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*deny=([0-9]+)
^/etc/pam.d/password-auth$1

Check the absence of deny parameter in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*deny[\s]*=[\s]*([0-9]+)^/etc/security/faillock.conf$1

Check the absence of deny parameter in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*deny=([0-9]+)^/etc/pam.d/system-auth$1

Check the absence of deny parameter in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*deny=([0-9]+)^/etc/pam.d/password-auth$1

Check the expected deny value in in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_deny_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
3
^[\s]*deny[\s]*=[\s]*([0-9]+)
^/etc/security/faillock.conf$1
Configure the root Account for Failed Password Attemptsxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root mediumCCE-83589-2

Configure the root Account for Failed Password Attempts

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_deny_root:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83589-2

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-002238, CCI-000044, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), IA-5(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-09-411080, SV-258055r926152_rule

Description
This rule configures the system to lock out the root account after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Rationale
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*even_deny_root"
    line="even_deny_root"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\beven_deny_root\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*even_deny_root' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ even_deny_root/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ even_deny_root/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check if system
    relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is present
  block:

  - name: Configure the root Account for Failed Password Attempts - Check integrity
      of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Configure the root Account for Failed Password Attempts - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Configure the root Account for Failed Password Attempts - Get authselect
      current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Configure the root Account for Failed Password Attempts - Ensure "with-faillock"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Configure the root Account for Failed Password Attempts - Ensure authselect
      changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is not present
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      preauth editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      authfail editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
      account section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check the presence
    of /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*even_deny_root
    line: even_deny_root
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter not in PAM files
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Configure the root Account for Failed Password Attempts - Check the proper
      remediation for the system
    block:

    - name: Configure the root Account for Failed Password Attempts - Define the PAM
        file to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Configure the root Account for Failed Password Attempts - Check if system
        relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Configure the root Account for Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Configure the root Account for Failed Password Attempts - Informative
          message based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Configure the root Account for Failed Password Attempts - Define the
          current authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Define the
          new authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Check if any
          custom profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Create an
          authselect custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Ensure the
          authselect custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Restore the
          authselect features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Configure the root Account for Failed Password Attempts - Change the
          PAM file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Configure the root Account for Failed Password Attempts - Ensure the "even_deny_root"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Configure the root Account for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Configure the root Account for Failed Password Attempts - Check the proper
      remediation for the system
    block:

    - name: Configure the root Account for Failed Password Attempts - Define the PAM
        file to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Configure the root Account for Failed Password Attempts - Check if system
        relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Configure the root Account for Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Configure the root Account for Failed Password Attempts - Informative
          message based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Configure the root Account for Failed Password Attempts - Define the
          current authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Define the
          new authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Check if any
          custom profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Configure the root Account for Failed Password Attempts - Create an
          authselect custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Ensure the
          authselect custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Configure the root Account for Failed Password Attempts - Restore the
          authselect features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Configure the root Account for Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Configure the root Account for Failed Password Attempts - Change the
          PAM file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Configure the root Account for Failed Password Attempts - Ensure the "even_deny_root"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\beven_deny_root\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Configure the root Account for Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in PAM files
  block:

  - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
      even_deny_root parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*even_deny_root
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_even_deny_root_parameter_is_present

  - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so preauth even_deny_root parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 even_deny_root
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_even_deny_root_parameter_is_present.found == 0

  - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so authfail even_deny_root parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 even_deny_root
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_even_deny_root_parameter_is_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83589-2
  - DISA-STIG-RHEL-09-411080
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(c)
  - accounts_passwords_pam_faillock_deny_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

No more than one pam_unix.so is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_system_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_system_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/system-auth$1

No more than one pam_unix.so is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_password_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_password_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/password-auth$1

One and only one pattern occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_system_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_system_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/system-auth$1

One and only one pattern occurrence is expected in account section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_system_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_system_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/system-auth$1

One and only one pattern occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_password_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_password_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/password-auth$1

One and only one pattern occurrence is expected in account section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_password_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_password_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/password-auth$1

Check the expected even_deny_root parameter in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_pamd_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*even_deny_root^/etc/pam.d/system-auth$1

Check the expected even_deny_root parameter in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_pamd_password:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*even_deny_root^/etc/pam.d/password-auth$1

Check the absence of even_deny_root parameter in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*even_deny_root^/etc/security/faillock.conf$1

Check the absence of even_deny_root parameter in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*even_deny_root^/etc/pam.d/system-auth$1

Check the absence of even_deny_root parameter in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*even_deny_root^/etc/pam.d/password-auth$1

Check the expected even_deny_root parameter in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_deny_root_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_deny_root_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*even_deny_root^/etc/security/faillock.conf$1
Lock Accounts Must Persistxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_dir mediumCCE-86068-4

Lock Accounts Must Persist

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_dir
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_dir:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86068-4

References:  CCI-000044, CCI-002238, AC-7(b), AC-7(a), AC-7.1(ii), SRG-OS-000021-GPOS-00005, SRG-OS-000329-GPOS-00128, RHEL-09-411105, SV-258060r926167_rule

Description
This rule ensures that the system lock out accounts using pam_faillock.so persist after system reboot. From "pam_faillock" man pages:
Note that the default directory that "pam_faillock" uses is usually cleared on system
boot so the access will be reenabled after system reboot. If that is undesirable, a different
tally directory must be set with the "dir" option.
pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version. The chosen profile expects the directory to be /var/log/faillock.
Rationale
Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. In combination with the silent option, user enumeration attacks are also mitigated.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_dir='/var/log/faillock'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*dir\s*="
    line="dir = $var_accounts_passwords_pam_faillock_dir"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(dir\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_dir"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bdir\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bdir\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*dir' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ dir='"$var_accounts_passwords_pam_faillock_dir"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ dir='"$var_accounts_passwords_pam_faillock_dir"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"dir"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_dir"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"dir"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_dir"'\3/' "$pam_file"
        fi
    done
fi

if ! rpm -q --quiet "python3-libselinux" ; then
    dnf install -y "python3-libselinux"
fi
if ! rpm -q --quiet "python3-policycoreutils" ; then
    dnf install -y "python3-policycoreutils"
fi
if ! rpm -q --quiet "policycoreutils-python-utils" ; then
    dnf install -y "policycoreutils-python-utils"
fi

mkdir -p "$var_accounts_passwords_pam_faillock_dir"
semanage fcontext -a -t faillog_t "$var_accounts_passwords_pam_faillock_dir(/.*)?"
restorecon -R -v "$var_accounts_passwords_pam_faillock_dir"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Check if system relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Remediation where authselect tool is present
  block:

  - name: Lock Accounts Must Persist - Check integrity of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Lock Accounts Must Persist - Informative message based on the authselect
      integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Lock Accounts Must Persist - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Lock Accounts Must Persist - Ensure "with-faillock" feature is enabled using
      authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Lock Accounts Must Persist - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Remediation where authselect tool is not present
  block:

  - name: Lock Accounts Must Persist - Check if pam_faillock.so is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Lock Accounts Must Persist - Enable pam_faillock.so preauth editing PAM
      files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts Must Persist - Enable pam_faillock.so authfail editing PAM
      files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Lock Accounts Must Persist - Enable pam_faillock.so account section editing
      PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_accounts_passwords_pam_faillock_dir # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_dir: !!str /var/log/faillock
  tags:
    - always

- name: Lock Accounts Must Persist - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure the pam_faillock.so dir parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*dir\s*=
    line: dir = {{ var_accounts_passwords_pam_faillock_dir }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure the pam_faillock.so dir parameter not
    in PAM files
  block:

  - name: Lock Accounts Must Persist - Check if /etc/pam.d/system-auth file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Lock Accounts Must Persist - Check the proper remediation for the system
    block:

    - name: Lock Accounts Must Persist - Define the PAM file to be edited as a local
        fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Lock Accounts Must Persist - Check if system relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts Must Persist - Ensure authselect custom profile is used
        if authselect is present
      block:

      - name: Lock Accounts Must Persist - Check integrity of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts Must Persist - Informative message based on the authselect
          integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts Must Persist - Get authselect current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts Must Persist - Define the current authselect profile as
          a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts Must Persist - Define the new authselect custom profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts Must Persist - Get authselect current features to also
          enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts Must Persist - Check if any custom profile with the same
          name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts Must Persist - Create an authselect custom profile based
          on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts Must Persist - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts Must Persist - Ensure the authselect custom profile is
          selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts Must Persist - Restore the authselect features in the
          custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts Must Persist - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts Must Persist - Change the PAM file to be edited according
          to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts Must Persist - Ensure the "dir" option from "pam_faillock.so"
        is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdir\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts Must Persist - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Lock Accounts Must Persist - Check if /etc/pam.d/password-auth file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Lock Accounts Must Persist - Check the proper remediation for the system
    block:

    - name: Lock Accounts Must Persist - Define the PAM file to be edited as a local
        fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Lock Accounts Must Persist - Check if system relies on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Lock Accounts Must Persist - Ensure authselect custom profile is used
        if authselect is present
      block:

      - name: Lock Accounts Must Persist - Check integrity of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Lock Accounts Must Persist - Informative message based on the authselect
          integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Lock Accounts Must Persist - Get authselect current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Lock Accounts Must Persist - Define the current authselect profile as
          a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Lock Accounts Must Persist - Define the new authselect custom profile
          as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Lock Accounts Must Persist - Get authselect current features to also
          enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts Must Persist - Check if any custom profile with the same
          name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Lock Accounts Must Persist - Create an authselect custom profile based
          on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Lock Accounts Must Persist - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts Must Persist - Ensure the authselect custom profile is
          selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Lock Accounts Must Persist - Restore the authselect features in the
          custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Lock Accounts Must Persist - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Lock Accounts Must Persist - Change the PAM file to be edited according
          to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Lock Accounts Must Persist - Ensure the "dir" option from "pam_faillock.so"
        is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bdir\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Lock Accounts Must Persist - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure the pam_faillock.so dir parameter in PAM
    files
  block:

  - name: Lock Accounts Must Persist - Check if pam_faillock.so dir parameter is already
      enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*dir
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_dir_parameter_is_present

  - name: Lock Accounts Must Persist - Ensure the inclusion of pam_faillock.so preauth
      dir parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 dir={{ var_accounts_passwords_pam_faillock_dir }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_dir_parameter_is_present.found == 0

  - name: Lock Accounts Must Persist - Ensure the inclusion of pam_faillock.so authfail
      dir parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 dir={{ var_accounts_passwords_pam_faillock_dir }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_dir_parameter_is_present.found == 0

  - name: Lock Accounts Must Persist - Ensure the desired value for pam_faillock.so
      preauth dir parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(dir)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_dir }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_dir_parameter_is_present.found > 0

  - name: Lock Accounts Must Persist - Ensure the desired value for pam_faillock.so
      authfail dir parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(dir)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_dir }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_dir_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure necessary SELinux packages are installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - python3-libselinux
  - python3-policycoreutils
  - policycoreutils-python-utils
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Create the tally directory if it does not exist
  ansible.builtin.file:
    path: '{{ var_accounts_passwords_pam_faillock_dir }}'
    state: directory
    setype: faillog_t
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure SELinux file context is permanently set
  ansible.builtin.command:
    cmd: semanage fcontext -a -t faillog_t "{{ var_accounts_passwords_pam_faillock_dir
      }}(/.*)?"
  register: result_accounts_passwords_pam_faillock_dir_semanage
  ignore_errors: true
  changed_when:
  - result_accounts_passwords_pam_faillock_dir_semanage.rc == 0
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Lock Accounts Must Persist - Ensure SELinux file context is applied
  ansible.builtin.command:
    cmd: restorecon -R "{{ var_accounts_passwords_pam_faillock_dir }}"
  register: result_accounts_passwords_pam_faillock_dir_restorecon
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86068-4
  - DISA-STIG-RHEL-09-411105
  - NIST-800-53-AC-7(a)
  - NIST-800-53-AC-7(b)
  - NIST-800-53-AC-7.1(ii)
  - accounts_passwords_pam_faillock_dir
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

Check that the expected dir value in system-auth is present both with preauth and authfail  oval:ssg-test_pam_faillock_dir_parameter_system_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_pam_faillock_dir_parameter_system_auth:obj:1 of type variable_object
Var ref
oval:ssg-var_faillock_dir_set_both_preauth_authfail_system_auth:var:1

Check that the expected dir value in password-auth is present both with preauth and authfail  oval:ssg-test_pam_faillock_dir_parameter_password_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_pam_faillock_dir_parameter_password_auth:obj:1 of type variable_object
Var ref
oval:ssg-var_faillock_dir_set_both_preauth_authfail_password_auth:var:1

Check the absence of dir parameter in /etc/security/faillock.conf  oval:ssg-test_pam_faillock_dir_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_faillock_dir_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
dir\s*=\s*(\S+|"[^"]+)
^[\s]*dir\s*=\s*(\S+|"[^"]+)
/etc/security/faillock.conf1

Check the absence of dir parameter in system-auth  oval:ssg-test_pam_faillock_dir_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_dir_parameter_system_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstanceFilter
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]*dir\s*=\s*(\S+|"[^"]+)
dir\s*=\s*(\S+|"[^"]+)
/etc/pam.d/system-auth1oval:ssg-state_pam_faillock_dir_parameter_not_default_value:ste:1

Check the absence of dir parameter in password-auth  oval:ssg-test_pam_faillock_dir_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_all_pam_faillock_dir_parameter_password_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstanceFilter
^[\s]*auth[\s]+(?:required|requisite)[\s]+pam_faillock.so[^\n#]*dir\s*=\s*(\S+|"[^"]+)
dir\s*=\s*(\S+|"[^"]+)
/etc/pam.d/password-auth1oval:ssg-state_pam_faillock_dir_parameter_not_default_value:ste:1

Check the expected dir value in in /etc/security/faillock.conf  oval:ssg-test_pam_faillock_dir_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_faillock_dir_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
dir\s*=\s*(\S+|"[^"]+)
^[\s]*dir\s*=\s*(\S+|"[^"]+)
/etc/security/faillock.conf1
Set Interval For Counting Failed Password Attemptsxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval mediumCCE-83583-5

Set Interval For Counting Failed Password Attempts

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_interval:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83583-5

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-09-411085, SV-258056r926155_rule

Description
Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out an account after a number of incorrect login attempts within a specified time period. Ensure that the file /etc/security/faillock.conf contains the following entry: fail_interval = <interval-in-seconds> where interval-in-seconds is 900 or greater. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Rationale
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(fail_interval\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_fail_interval"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bfail_interval\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bfail_interval\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Check if system relies
    on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check integrity of
      authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Interval For Counting Failed Password Attempts - Informative message
      based on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Interval For Counting Failed Password Attempts - Get authselect current
      features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Interval For Counting Failed Password Attempts - Ensure "with-faillock"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Interval For Counting Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      preauth editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      authfail editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
      account section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str 900
  tags:
    - always

- name: Set Interval For Counting Failed Password Attempts - Check the presence of
    /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*fail_interval\s*=
    line: fail_interval = {{ var_accounts_passwords_pam_faillock_fail_interval }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter not in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Interval For Counting Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Interval For Counting Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Interval For Counting Failed Password Attempts - Define the PAM file
        to be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Interval For Counting Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        custom profile is used if authselect is present
      block:

      - name: Set Interval For Counting Failed Password Attempts - Check integrity
          of authselect current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Interval For Counting Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Interval For Counting Failed Password Attempts - Define the current
          authselect profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Define the new
          authselect custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Get authselect
          current features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Interval For Counting Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Interval For Counting Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
          changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Interval For Counting Failed Password Attempts - Change the PAM
          file to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Interval For Counting Failed Password Attempts - Ensure the "fail_interval"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bfail_interval\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Interval For Counting Failed Password Attempts - Ensure authselect
        changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in PAM files
  block:

  - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
      fail_interval parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*fail_interval
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_fail_interval_parameter_is_present

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
      of pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found == 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so preauth fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0

  - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
      value for pam_faillock.so authfail fail_interval parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(fail_interval)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_fail_interval_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83583-5
  - DISA-STIG-RHEL-09-411085
  - NIST-800-53-AC-7(a)
  - NIST-800-53-CM-6(a)
  - accounts_passwords_pam_faillock_interval
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

No more than one pam_unix.so is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_system_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_system_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/system-auth$1

No more than one pam_unix.so is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_password_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_password_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_system_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_system_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_system_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_system_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_password_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_password_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_password_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_password_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/password-auth$1

Check the expected fail_interval value in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_pamd_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
900
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*fail_interval=([0-9]+)
^/etc/pam.d/system-auth$1

Check the expected fail_interval value in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_pamd_password:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
900
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*fail_interval=([0-9]+)
^/etc/pam.d/password-auth$1

Check the absence of fail_interval parameter in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*fail_interval[\s]*=[\s]*([0-9]+)^/etc/security/faillock.conf$1

Check the absence of fail_interval parameter in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*fail_interval=([0-9]+)^/etc/pam.d/system-auth$1

Check the absence of fail_interval parameter in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*fail_interval=([0-9]+)^/etc/pam.d/password-auth$1

Check the expected fail_interval value in in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_interval_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_interval_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
900
^[\s]*fail_interval[\s]*=[\s]*([0-9]+)
^/etc/security/faillock.conf$1
Set Lockout Time for Failed Password Attemptsxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time mediumCCE-83588-4

Set Lockout Time for Failed Password Attempts

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_passwords_pam_faillock_unlock_time:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83588-4

References:  BP28(R18), A.30.SEC-RHEL1, 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), PR.AC-7, FIA_AFL.1, Req-8.1.7, 8.3.4, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, RHEL-09-411090, 5.5.2, SV-258057r926158_rule

Description
This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_faillock.so. Ensure that the file /etc/security/faillock.conf contains the following entry: unlock_time=<interval-in-seconds> where interval-in-seconds is 0 or greater. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid any errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version. If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user. This should be done using the faillock tool.
Rationale
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Warnings
warning  If the system supports the new /etc/security/faillock.conf file but the pam_faillock.so parameters are defined directly in /etc/pam.d/system-auth and /etc/pam.d/password-auth, the remediation will migrate the unlock_time parameter to /etc/security/faillock.conf to ensure compatibility with authselect tool. The parameters deny and fail_interval, if used, also have to be migrated by their respective remediation.
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='0'


if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature with-faillock

authselect apply-changes -b
else
    
AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix\.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*required.*pam_deny\.so.*/i auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix\.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock\.so)/\1required     \3/g' "$pam_file"
done

fi

AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(unlock_time\s*=\s*\)\(\S\+\)|\1'"$var_accounts_passwords_pam_faillock_unlock_time"'|g' $FAILLOCK_CONF
    fi
    for pam_file in "${AUTH_FILES[@]}"
    do
        if [ -e "$pam_file" ] ; then
            PAM_FILE_PATH="$pam_file"
            if [ -f /usr/bin/authselect ]; then
                
                if ! authselect check; then
                echo "
                authselect integrity check failed. Remediation aborted!
                This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
                It is not recommended to manually edit the PAM files when authselect tool is available.
                In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
                exit 1
                fi

                CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
                # If not already in use, a custom profile is created preserving the enabled features.
                if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                    ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                    authselect create-profile hardening -b $CURRENT_PROFILE
                    CURRENT_PROFILE="custom/hardening"
                    
                    authselect apply-changes -b --backup=before-hardening-custom-profile
                    authselect select $CURRENT_PROFILE
                    for feature in $ENABLED_FEATURES; do
                        authselect enable-feature $feature;
                    done
                    
                    authselect apply-changes -b --backup=after-hardening-custom-profile
                fi
                PAM_FILE_NAME=$(basename "$pam_file")
                PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

                authselect apply-changes -b
            fi
            
        if grep -qP '^\s*auth\s.*\bpam_faillock.so\s.*\bunlock_time\b' "$PAM_FILE_PATH"; then
            sed -i -E --follow-symlinks 's/(.*auth.*pam_faillock.so.*)\bunlock_time\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
        fi
            if [ -f /usr/bin/authselect ]; then
                
                authselect apply-changes -b
            fi
        else
            echo "$pam_file was not found" >&2
        fi
    done
else
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock\.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock\.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock\.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Set Lockout Time for Failed Password Attempts - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Set Lockout Time for Failed Password Attempts - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Set Lockout Time for Failed Password Attempts - Ensure "with-faillock" feature
      is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-faillock
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-faillock")

  - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      is already enabled
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail)
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_is_enabled

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so preauth
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so preauth
      insertbefore: ^auth.*sufficient.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so authfail
      editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: auth        required      pam_faillock.so authfail
      insertbefore: ^auth.*required.*pam_deny\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so account
      section editing PAM files
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      line: account     required      pam_faillock.so
      insertbefore: ^account.*required.*pam_unix\.so.*
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_is_enabled.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 0
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter not in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/system-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/system-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/system-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists

  - name: Set Lockout Time for Failed Password Attempts - Check if /etc/pam.d/password-auth
      file is present
    ansible.builtin.stat:
      path: /etc/pam.d/password-auth
    register: result_pam_file_present

  - name: Set Lockout Time for Failed Password Attempts - Check the proper remediation
      for the system
    block:

    - name: Set Lockout Time for Failed Password Attempts - Define the PAM file to
        be edited as a local fact
      ansible.builtin.set_fact:
        pam_file_path: /etc/pam.d/password-auth

    - name: Set Lockout Time for Failed Password Attempts - Check if system relies
        on authselect tool
      ansible.builtin.stat:
        path: /usr/bin/authselect
      register: result_authselect_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect custom
        profile is used if authselect is present
      block:

      - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
          current profile
        ansible.builtin.command:
          cmd: authselect check
        register: result_authselect_check_cmd
        changed_when: false
        failed_when: false

      - name: Set Lockout Time for Failed Password Attempts - Informative message
          based on the authselect integrity check result
        ansible.builtin.assert:
          that:
          - result_authselect_check_cmd.rc == 0
          fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
          success_msg:
          - authselect integrity check passed

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          profile
        ansible.builtin.shell:
          cmd: authselect current -r | awk '{ print $1 }'
        register: result_authselect_profile
        changed_when: false
        when:
        - result_authselect_check_cmd is success

      - name: Set Lockout Time for Failed Password Attempts - Define the current authselect
          profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Define the new authselect
          custom profile as a local fact
        ansible.builtin.set_fact:
          authselect_current_profile: '{{ result_authselect_profile.stdout }}'
          authselect_custom_profile: custom/hardening
        when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Get authselect current
          features to also enable them in the custom profile
        ansible.builtin.shell:
          cmd: authselect current | tail -n+3 | awk '{ print $2 }'
        register: result_authselect_features
        changed_when: false
        when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Check if any custom
          profile with the same name was already created
        ansible.builtin.stat:
          path: /etc/authselect/{{ authselect_custom_profile }}
        register: result_authselect_custom_profile_present
        changed_when: false
        when:
        - authselect_current_profile is not match("custom/")

      - name: Set Lockout Time for Failed Password Attempts - Create an authselect
          custom profile based on the current profile
        ansible.builtin.command:
          cmd: authselect create-profile hardening -b {{ authselect_current_profile
            }}
        when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Ensure the authselect
          custom profile is selected
        ansible.builtin.command:
          cmd: authselect select {{ authselect_custom_profile }}
        register: result_pam_authselect_select_profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

      - name: Set Lockout Time for Failed Password Attempts - Restore the authselect
          features in the custom profile
        ansible.builtin.command:
          cmd: authselect enable-feature {{ item }}
        loop: '{{ result_authselect_features.stdout_lines }}'
        register: result_pam_authselect_restore_features
        when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
          are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
        when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - result_pam_authselect_restore_features is not skipped

      - name: Set Lockout Time for Failed Password Attempts - Change the PAM file
          to be edited according to the custom authselect profile
        ansible.builtin.set_fact:
          pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
            | basename }}
      when:
      - result_authselect_present.stat.exists

    - name: Set Lockout Time for Failed Password Attempts - Ensure the "unlock_time"
        option from "pam_faillock.so" is not present in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: (.*auth.*pam_faillock.so.*)\bunlock_time\b=?[0-9a-zA-Z]*(.*)
        replace: \1\2
      register: result_pam_option_removal

    - name: Set Lockout Time for Failed Password Attempts - Ensure authselect changes
        are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present.stat.exists
      - result_pam_option_removal is changed
    when:
    - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

  - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
      unlock_time parameter is already enabled in pam files
    ansible.builtin.lineinfile:
      path: /etc/pam.d/system-auth
      regexp: .*auth.*pam_faillock\.so (preauth|authfail).*unlock_time
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_faillock_unlock_time_parameter_is_present

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
      pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
      line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
        }}
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found == 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so preauth unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0

  - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
      for pam_faillock.so authfail unlock_time parameter in auth section
    ansible.builtin.lineinfile:
      path: '{{ item }}'
      backrefs: true
      regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
      line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
      state: present
    loop:
    - /etc/pam.d/system-auth
    - /etc/pam.d/password-auth
    when:
    - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
  - '"pam" in ansible_facts.packages'
  - not result_faillock_conf_check.stat.exists
  tags:
  - CCE-83588-4
  - CJIS-5.5.3
  - DISA-STIG-RHEL-09-411090
  - NIST-800-171-3.1.8
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.1.7
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_faillock_unlock_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

No more than one pam_unix.so is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_system_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_system_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/system-auth$1

No more than one pam_unix.so is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_password_pam_unix_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_password_pam_unix_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth\N+pam_unix\.so^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_system_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_system_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of system-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_system_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_system_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/system-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_password_pam_faillock_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_password_pam_faillock_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+preauth[\s\S]*^[\s]*auth[\s]+(sufficient|\[(?=.*\bsuccess=done\b)(?=.*?\bnew_authtok_reqd=done\b)(?=.*?\bdefault=ignore\b).*\])[\s]+pam_unix\.so[\s\S]*^[\s]*auth[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\w\d=]+authfail^/etc/pam.d/password-auth$1

One and only one occurrence is expected in auth section of password-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_password_pam_faillock_account:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_password_pam_faillock_account:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_faillock\.so[\s\S]*^[\s]*account[\s]+(required|\[(?=.*?\bsuccess=ok\b)(?=.*?\bnew_authtok_reqd=ok\b)(?=.*?\bignore=ignore\b)(?=.*?\bdefault=bad\b).*\])[\s]+pam_unix\.so^/etc/pam.d/password-auth$1

Check the expected unlock_time value in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_system:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
0
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*unlock_time=([0-9]+)
^/etc/pam.d/system-auth$1

Check the expected unlock_time value in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_password:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
0
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*unlock_time=([0-9]+)
^/etc/pam.d/password-auth$1

Check the absence of unlock_time parameter in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_no_faillock_conf:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*unlock_time[\s]*=[\s]*([0-9]+)^/etc/security/faillock.conf$1

Check the absence of unlock_time parameter in system-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_no_pamd_system:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_system:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*unlock_time=([0-9]+)^/etc/pam.d/system-auth$1

Check the absence of unlock_time parameter in password-auth  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_no_pamd_password:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_pamd_password:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*auth[\s]+.+[\s]+pam_faillock.so[\s]+[^\n]*unlock_time=([0-9]+)^/etc/pam.d/password-auth$1

Check the expected unlock_time value in in /etc/security/faillock.conf  oval:ssg-test_accounts_passwords_pam_faillock_unlock_time_parameter_faillock_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_passwords_pam_faillock_unlock_time_parameter_faillock_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
0
^[\s]*unlock_time[\s]*=[\s]*([0-9]+)
^/etc/security/faillock.conf$1
Ensure PAM Enforces Password Requirements - Minimum Digit Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit mediumCCE-83566-0

Ensure PAM Enforces Password Requirements - Minimum Digit Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_dcredit:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83566-0

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000194, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000071-GPOS-00039, RHEL-09-611070, SV-258103r926296_rule

Description
The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_dcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83566-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83566-0
  - DISA-STIG-RHEL-09-611070
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
    PAM variable dcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83566-0
  - DISA-STIG-RHEL-09-611070
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_dcredit:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_dcredit:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*dcredit[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Prevent the Use of Dictionary Wordsxccdf_org.ssgproject.content_rule_accounts_password_pam_dictcheck mediumCCE-88413-0

Ensure PAM Enforces Password Requirements - Prevent the Use of Dictionary Words

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_dictcheck
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_dictcheck:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88413-0

References:  CCI-000366, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), SRG-OS-000480-GPOS-00225, RHEL-09-611105, SV-258110r926317_rule

Description
The pam_pwquality module's dictcheck check if passwords contains dictionary words. When dictcheck is set to 1 passwords will be checked for dictionary words.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Passwords with dictionary words may be more vulnerable to password-guessing attacks.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_dictcheck='1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dictcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dictcheck"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dictcheck\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dictcheck\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-88413-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88413-0
  - DISA-STIG-RHEL-09-611105
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_dictcheck
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dictcheck # promote to variable
  set_fact:
    var_password_pam_dictcheck: !!str 1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Prevent the Use of Dictionary
    Words - Ensure PAM variable dictcheck is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dictcheck
    line: dictcheck = {{ var_password_pam_dictcheck }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-88413-0
  - DISA-STIG-RHEL-09-611105
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_dictcheck
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_dictcheck:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_dictcheck:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*dictcheck[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Minimum Different Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_difok mediumCCE-83564-5

Ensure PAM Enforces Password Requirements - Minimum Different Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_difok
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_difok:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83564-5

References:  1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(b), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, RHEL-09-611115, SV-258112r926323_rule

Description
The pam_pwquality module's difok parameter sets the number of characters in a password that must not be present in and old password during a password change.

Modify the difok setting in /etc/security/pwquality.conf to equal 8 to require differing characters when changing passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute–force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of different characters during password changes ensures that newly changed passwords should not resemble previously compromised ones. Note that passwords which are changed on compromised systems will still be compromised, however.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_difok='8'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^difok")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_difok"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^difok\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^difok\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83564-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83564-5
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611115
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_difok # promote to variable
  set_fact:
    var_password_pam_difok: !!str 8
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Characters -
    Ensure PAM variable difok is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*difok
    line: difok = {{ var_password_pam_difok }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83564-5
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611115
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(b)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_difok
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_difok:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_difok:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*difok[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Enforce for root Userxccdf_org.ssgproject.content_rule_accounts_password_pam_enforce_root mediumCCE-86356-3

Ensure PAM Enforces Password Requirements - Enforce for root User

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_enforce_root
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_enforce_root:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86356-3

References:  CCI-000194, CCI-000193, CCI-001619, CCI-000205, CCI-000195, CCI-000192, CCI-000366, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), SRG-OS-000072-GPOS-00040, SRG-OS-000071-GPOS-00039, SRG-OS-000070-GPOS-00038, SRG-OS-000266-GPOS-00101, SRG-OS-000078-GPOS-00046, SRG-OS-000480-GPOS-00225, SRG-OS-000069-GPOS-00037, RHEL-09-611060, SV-258101r926290_rule

Description
The pam_pwquality module's enforce_for_root parameter controls requirements for enforcing password complexity for the root user. Enable the enforce_for_root setting in /etc/security/pwquality.conf to require the root user to use complex passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -e "/etc/security/pwquality.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*enforce_for_root/Id" "/etc/security/pwquality.conf"
else
    touch "/etc/security/pwquality.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/security/pwquality.conf"

cp "/etc/security/pwquality.conf" "/etc/security/pwquality.conf.bak"
# Insert at the end of the file
printf '%s\n' "enforce_for_root" >> "/etc/security/pwquality.conf"
# Clean up after ourselves.
rm "/etc/security/pwquality.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86356-3
  - DISA-STIG-RHEL-09-611060
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_enforce_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure PAM Enforces Password Requirements - Enforce for root User
  lineinfile:
    path: /etc/security/pwquality.conf
    create: true
    line: enforce_for_root
    state: present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-86356-3
  - DISA-STIG-RHEL-09-611060
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_enforce_root
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

tests the presence of 'enforce_for_root' setting in the /etc/security/pwquality.conf file  oval:ssg-test_accounts_password_pam_enforce_root:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_accounts_password_pam_enforce_root:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/security/pwquality.conf^[\s]*enforce_for_root[\s]*$1
Ensure PAM Enforces Password Requirements - Minimum Lowercase Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit mediumCCE-83570-2

Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_lcredit:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83570-2

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000070-GPOS-00038, RHEL-09-611065, SV-258102r926293_rule

Description
The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_lcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83570-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83570-2
  - DISA-STIG-RHEL-09-611065
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Ensure PAM variable lcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83570-2
  - DISA-STIG-RHEL-09-611065
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_lcredit:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_lcredit:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*lcredit[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating Characters from Same Character Classxccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat mediumCCE-83575-1

Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating Characters from Same Character Class

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_maxclassrepeat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_maxclassrepeat:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83575-1

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, RHEL-09-611120, SV-258113r926326_rule

Description
The pam_pwquality module's maxclassrepeat parameter controls requirements for consecutive repeating characters from the same character class. When set to a positive number, it will reject passwords which contain more than that number of consecutive characters from the same character class. Modify the maxclassrepeat setting in /etc/security/pwquality.conf to equal 4 to prevent a run of (4 + 1) or more identical characters.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex a password, the greater the number of possible combinations that need to be tested before the password is compromised.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_maxclassrepeat='4'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxclassrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxclassrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxclassrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxclassrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83575-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83575-1
  - DISA-STIG-RHEL-09-611120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_maxclassrepeat # promote to variable
  set_fact:
    var_password_pam_maxclassrepeat: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating
    Characters from Same Character Class - Ensure PAM variable maxclassrepeat is set
    accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*maxclassrepeat
    line: maxclassrepeat = {{ var_password_pam_maxclassrepeat }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83575-1
  - DISA-STIG-RHEL-09-611120
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxclassrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_maxclassrepeat:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_maxclassrepeat:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*maxclassrepeat[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Set Password Maximum Consecutive Repeating Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat mediumCCE-83567-8

Set Password Maximum Consecutive Repeating Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_maxrepeat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_maxrepeat:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83567-8

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, RHEL-09-611125, SV-258114r926329_rule

Description
The pam_pwquality module's maxrepeat parameter controls requirements for consecutive repeating characters. When set to a positive number, it will reject passwords which contain more than that number of consecutive characters. Modify the maxrepeat setting in /etc/security/pwquality.conf to equal 3 to prevent a run of (3 + 1) or more identical characters.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Passwords with excessive repeating characters may be more vulnerable to password-guessing attacks.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_maxrepeat='3'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^maxrepeat")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_maxrepeat"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^maxrepeat\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^maxrepeat\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83567-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83567-8
  - DISA-STIG-RHEL-09-611125
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_maxrepeat # promote to variable
  set_fact:
    var_password_pam_maxrepeat: !!str 3
  tags:
    - always

- name: Set Password Maximum Consecutive Repeating Characters - Ensure PAM variable
    maxrepeat is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*maxrepeat
    line: maxrepeat = {{ var_password_pam_maxrepeat }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83567-8
  - DISA-STIG-RHEL-09-611125
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_maxrepeat
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_maxrepeat:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_maxrepeat:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*maxrepeat[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Minimum Different Categoriesxccdf_org.ssgproject.content_rule_accounts_password_pam_minclass mediumCCE-83563-7

Ensure PAM Enforces Password Requirements - Minimum Different Categories

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_minclass
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_minclass:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83563-7

References:  A.11.SEC-RHEL3, 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, RHEL-09-611130, 5.5.1, SV-258115r926332_rule

Description
The pam_pwquality module's minclass parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is considered valid. For example, setting this value to three (3) requires that any password must have characters from at least three different categories in order to be approved. The default value is zero (0), meaning there are no required classes. There are four categories available:
* Upper-case characters
* Lower-case characters
* Digits
* Special characters (for example, punctuation)
Modify the minclass setting in /etc/security/pwquality.conf entry to require 4 differing categories of characters when changing passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of character categories makes password guessing attacks more difficult by ensuring a larger search space.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minclass='4'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83563-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83563-7
  - DISA-STIG-RHEL-09-611130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83563-7
  - DISA-STIG-RHEL-09-611130
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_minclass:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_minclass:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*minclass[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Minimum Lengthxccdf_org.ssgproject.content_rule_accounts_password_pam_minlen mediumCCE-83579-3

Ensure PAM Enforces Password Requirements - Minimum Length

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_minlen:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83579-3

References:  BP28(R18), A.11.SEC-RHEL3, 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000078-GPOS-00046, RHEL-09-611090, 5.5.1, SV-258107r926308_rule

Description
The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=15 after pam_pwquality to set minimum password length requirements.
Rationale
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='15'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83579-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83579-3
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611090
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 15
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83579-3
  - CJIS-5.6.2.1.1
  - DISA-STIG-RHEL-09-611090
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_minlen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_minlen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*minlen[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Minimum Special Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit mediumCCE-83565-2

Ensure PAM Enforces Password Requirements - Minimum Special Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_ocredit:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83565-2

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-001619, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, SRG-OS-000266-GPOS-00101, RHEL-09-611100, SV-258109r926314_rule

Description
The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ocredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83565-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83565-2
  - DISA-STIG-RHEL-09-611100
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Ensure
    PAM variable ocredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83565-2
  - DISA-STIG-RHEL-09-611100
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_ocredit:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_ocredit:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*ocredit[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Ensure PAM password complexity module is enabled in password-authxccdf_org.ssgproject.content_rule_accounts_password_pam_pwquality_password_auth mediumCCE-85878-7

Ensure PAM password complexity module is enabled in password-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_pwquality_password_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_pwquality_password_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85878-7

References:  CCI-000366, SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, SRG-OS-000480-GPOS-00227, RHEL-09-611040, SV-258097r926278_rule

Description
To enable PAM password complexity in password-auth file: Edit the password section in /etc/pam.d/password-auth to show password requisite pam_pwquality.so.
Rationale
Enabling PAM password complexity permits to enforce strong passwords and consequently makes the system less prone to dictionary attacks.
OVAL test results details

check the configuration of /etc/pam.d/password-auth  oval:ssg-test_accounts_password_pam_pwquality_password_auth:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/password-authpassword requisite pam_pwquality.so
Ensure PAM password complexity module is enabled in system-authxccdf_org.ssgproject.content_rule_accounts_password_pam_pwquality_system_auth mediumCCE-85873-8

Ensure PAM password complexity module is enabled in system-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_pwquality_system_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_pwquality_system_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85873-8

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-611045, SV-258098r926281_rule

Description
To enable PAM password complexity in system-auth file: Edit the password section in /etc/pam.d/system-auth to show password requisite pam_pwquality.so.
Rationale
Enabling PAM password complexity permits to enforce strong passwords and consequently makes the system less prone to dictionary attacks.
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_accounts_password_pam_pwquality_system_auth:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-authpassword requisite pam_pwquality.so
Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Sessionxccdf_org.ssgproject.content_rule_accounts_password_pam_retry mediumCCE-83569-4

Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Session

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_retry
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_retry:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83569-4

References:  A.11.SEC-RHEL3, 1, 11, 12, 15, 16, 3, 5, 9, 5.5.3, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, PR.IP-1, FMT_MOF_EXT.1, SRG-OS-000069-GPOS-00037, SRG-OS-000480-GPOS-00227, RHEL-09-611010, 5.5.1, SV-258091r926260_rule

Description
To configure the number of retry prompts that are permitted per-session: Edit the /etc/security/pwquality.conf to include retry=3, or a lower value if site policy is more restrictive. The DoD requirement is a maximum of 3 prompts per session.
Rationale
Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.
OVAL test results details

check the configuration of /etc/pam.d/password-auth  oval:ssg-test_password_pam_pwquality_retry_password_auth:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/password-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality_retry_system_auth:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/pam.d/password-auth  oval:ssg-test_password_pam_pwquality_retry_password_auth_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/pam.d/password-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality_retry_system_auth_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_retry_pwquality_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_retry_pwquality_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/security/pwquality.conf^[\s]*retry[\s]*=[\s]*(\d+)(?:[\s]|$)1
Ensure PAM Enforces Password Requirements - Minimum Uppercase Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit mediumCCE-83568-6

Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_ucredit:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83568-6

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, RHEL-09-611110, SV-258111r926320_rule

Description
The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.
Rationale
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ucredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    cce="CCE-83568-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/security/pwquality.conf" >> "/etc/security/pwquality.conf"
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83568-6
  - DISA-STIG-RHEL-09-611110
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Ensure PAM variable ucredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83568-6
  - DISA-STIG-RHEL-09-611110
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check the configuration of /etc/pam.d/system-auth  oval:ssg-test_password_pam_pwquality:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/system-auth password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=

check the configuration of /etc/security/pwquality.conf  oval:ssg-test_password_pam_pwquality_ucredit:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_password_pam_pwquality_ucredit:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/security/pwquality\.conf$^\s*ucredit[\s]*=[\s]*(-?\d+)(?:[\s]|$)1
Set Password Hashing Algorithm in /etc/libuser.confxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf mediumCCE-88865-1

Set Password Hashing Algorithm in /etc/libuser.conf

Rule IDxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_libuserconf
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-set_password_hashing_algorithm_libuserconf:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88865-1

References:  1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, 8.3.2, SRG-OS-000073-GPOS-00041, RHEL-09-611135, SV-258116r926335_rule

Description
In /etc/libuser.conf, add or correct the following line in its [defaults] section to ensure the system will use the SHA-512 algorithm for password hashing:
crypt_style = sha512
Rationale
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
OVAL test results details

The password hashing algorithm should be set correctly in /etc/libuser.conf  oval:ssg-test_etc_libuser_conf_cryptstyle:tst:1  true

Following items have been found on the system:
PathContent
/etc/libuser.conf crypt_style = sha512
Set Password Hashing Algorithm in /etc/login.defsxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs mediumCCE-90590-1

Set Password Hashing Algorithm in /etc/login.defs

Rule IDxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_logindefs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-set_password_hashing_algorithm_logindefs:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90590-1

References:  BP28(R32), A.19.SEC-RHEL3, 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, 8.3.2, SRG-OS-000073-GPOS-00041, RHEL-09-611140, 5.5.4, SV-258117r926338_rule

Description
In /etc/login.defs, add or correct the following line to ensure the system will use SHA512 as the hashing algorithm:
ENCRYPT_METHOD SHA512
Rationale
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.
OVAL test results details

The value of ENCRYPT_METHOD should be set appropriately in /etc/login.defs  oval:ssg-test_etc_login_defs_encrypt_method:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-variable_last_encrypt_method_instance_value:var:1SHA512
Set PAM''s Password Hashing Algorithm - password-authxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_passwordauth mediumCCE-85946-2

Set PAM''s Password Hashing Algorithm - password-auth

Rule IDxccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_passwordauth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-set_password_hashing_algorithm_passwordauth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85946-2

References:  BP28(R32), A.19.SEC-RHEL3, 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, CCI-000803, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, RHEL-09-671025, 5.5.4, SV-258233r926686_rule

Description
The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/password-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
OVAL test results details

check /etc/pam.d/password-auth for correct settings  oval:ssg-test_pam_unix_passwordauth_sha512:tst:1  true

Following items have been found on the system:
PathContent
/etc/pam.d/password-authpassword sufficient pam_unix.so try_first_pass use_authtok nullok sha512 shadow
Set Password Hashing Rounds in /etc/login.defsxccdf_org.ssgproject.content_rule_set_password_hashing_min_rounds_logindefs mediumCCE-89708-2

Set Password Hashing Rounds in /etc/login.defs

Rule IDxccdf_org.ssgproject.content_rule_set_password_hashing_min_rounds_logindefs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-set_password_hashing_min_rounds_logindefs:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89708-2

References:  BP28(R68), CCI-000196, CCI-000803, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, RHEL-09-611150, SV-258119r926344_rule

Description
In /etc/login.defs, ensure SHA_CRYPT_MIN_ROUNDS and SHA_CRYPT_MAX_ROUNDS has the minimum value of 5000. For example:
SHA_CRYPT_MIN_ROUNDS 5000
SHA_CRYPT_MAX_ROUNDS 5000
Notice that if neither are set, they already have the default value of 5000. If either is set, they must have the minimum value of 5000.
Rationale
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using more hashing rounds makes password cracking attacks more difficult.
OVAL test results details

SHA_CRYPT_MIN_ROUNDS is not explicitly configured in /etc/login.defs and therefore takes on the default value  oval:ssg-test_etc_login_defs_sha_crypt_min_rounds_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_login_defs_sha_crypt_min_rounds_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^\s*SHA_CRYPT_MIN_ROUNDS\s*1

SHA_CRYPT_MIN_ROUNDS is explicitly configured in /etc/login.defs and its value most be greater or equal to 5000  oval:ssg-test_etc_login_defs_sha_crypt_min_rounds_present:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_login_defs_sha_crypt_min_rounds_present:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^\s*SHA_CRYPT_MIN_ROUNDS\s+(\d+)\s*$1

SHA_CRYPT_MAX_ROUNDS is not explicitly configured in /etc/login.defs and therefore takes on the default value  oval:ssg-test_etc_login_defs_sha_crypt_max_rounds_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_login_defs_sha_crypt_max_rounds_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^\s*SHA_CRYPT_MAX_ROUNDS\s*1

SHA_CRYPT_MIN_ROUNDS is not explicitly configured in /etc/login.defs and therefore takes on the default value  oval:ssg-test_etc_login_defs_sha_crypt_min_rounds_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_login_defs_sha_crypt_min_rounds_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^\s*SHA_CRYPT_MIN_ROUNDS\s*1

SHA_CRYPT_MAX_ROUNDS is explicitly configured in /etc/login.defs and its value most be greater or equal to 5000  oval:ssg-test_etc_login_defs_sha_crypt_max_rounds_present:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_login_defs_sha_crypt_max_rounds_present:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^\s*SHA_CRYPT_MAX_ROUNDS\s+(\d+)\s*$1
Disallow Configuration to Bypass Password Requirements for Privilege Escalationxccdf_org.ssgproject.content_rule_disallow_bypass_password_sudo mediumCCE-85967-8

Disallow Configuration to Bypass Password Requirements for Privilege Escalation

Rule IDxccdf_org.ssgproject.content_rule_disallow_bypass_password_sudo
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-disallow_bypass_password_sudo:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85967-8

References:  CCI-002038, IA-11, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, RHEL-09-611145, SV-258118r926341_rule

Description
Verify the operating system is not configured to bypass password requirements for privilege escalation. Check the configuration of the "/etc/pam.d/sudo" file with the following command:
$ sudo grep pam_succeed_if /etc/pam.d/sudo
If any occurrences of "pam_succeed_if" is returned from the command, this is a finding.
Rationale
Without re-authentication, users may access resources or perform tasks for which they do not have authorization. When operating systems provide the capability to escalate a functional capability, it is critical the user re-authenticate.
OVAL test results details

Check absence of conf pam_succeed_if in /etc/pam.d/sudo  oval:ssg-test_disallow_bypass_password_sudo:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_disallow_bypass_password_sudo:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/pam.d/sudo^.*pam_succeed_if.*$1
Install the tmux Packagexccdf_org.ssgproject.content_rule_package_tmux_installed mediumCCE-83599-1

Install the tmux Package

Rule IDxccdf_org.ssgproject.content_rule_package_tmux_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_tmux_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83599-1

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.10, CCI-000058, CCI-000056, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), PR.AC-7, FMT_SMF_EXT.1, FMT_MOF_EXT.1, FTA_SSL.1, SRG-OS-000030-GPOS-00011, SRG-OS-000028-GPOS-00009, RHEL-09-412010, SV-258063r926176_rule

Description
To enable console screen locking, install the tmux package. A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence. The session lock is implemented at the point where session activity can be determined. Rather than be forced to wait for a period of time to expire before the user session can be locked, Red Hat Enterprise Linux 9 needs to provide users with the ability to manually invoke a session lock so users can secure their session if it is necessary to temporarily vacate the immediate physical vicinity. Instruct users to begin new terminal sessions with the following command:
$ tmux
The console can now be locked with the following key combination:
ctrl+b :lock-session
Rationale
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operation system session prior to vacating the vicinity, operating systems need to be able to identify when a user's session has idled and take action to initiate the session lock.

The tmux package allows for a session lock to be implemented and configured.
OVAL test results details

package tmux is installed  oval:ssg-test_package_tmux_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
tmuxx86_64(none)5.el93.2a0:3.2a-5.el9199e2f91fd431d51tmux-0:3.2a-5.el9.x86_64
Support session locking with tmuxxccdf_org.ssgproject.content_rule_configure_bashrc_exec_tmux mediumCCE-90586-9

Support session locking with tmux

Rule IDxccdf_org.ssgproject.content_rule_configure_bashrc_exec_tmux
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_bashrc_exec_tmux:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90586-9

References:  CCI-000056, CCI-000058, FMT_SMF_EXT.1, FMT_MOF_EXT.1, FTA_SSL.1, SRG-OS-000031-GPOS-00012, SRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011, RHEL-09-412015, SV-258064r926179_rule

Description
The tmux terminal multiplexer is used to implement automatic session locking. It should be started from /etc/bashrc or drop-in files within /etc/profile.d/.
Rationale
Unlike bash itself, the tmux terminal multiplexer provides a mechanism to lock sessions after period of inactivity. A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence.

Complexity:low
Disruption:low
Reboot:true
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q tmux; }; then

if ! grep -x '  case "$name" in sshd|login) exec tmux ;; esac' /etc/bashrc; then
    cat >> /etc/profile.d/tmux.sh <<'EOF'
if [ "$PS1" ]; then
  parent=$(ps -o ppid= -p $$)
  name=$(ps -o comm= -p $parent)
  case "$name" in sshd|login) exec tmux ;; esac
fi
EOF
    chmod 0644 /etc/profile.d/tmux.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90586-9
  - DISA-STIG-RHEL-09-412015
  - configure_bashrc_exec_tmux
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Support session locking with tmux: Determine If the Tmux Launch Script Is
    Present in /etc/bashrc'
  ansible.builtin.find:
    paths: /etc
    patterns: bashrc
    contains: .*case "$name" in sshd|login) exec tmux ;; esac.*
  register: tmux_in_bashrc
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"tmux" in ansible_facts.packages'
  tags:
  - CCE-90586-9
  - DISA-STIG-RHEL-09-412015
  - configure_bashrc_exec_tmux
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Support session locking with tmux: Determine If the Tmux Launch Script Is
    Present in /etc/profile.d/*.sh'
  ansible.builtin.find:
    paths: /etc/profile.d
    patterns: '*.sh'
    contains: .*case "$name" in sshd|login) exec tmux ;; esac.*
  register: tmux_in_profile_d
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"tmux" in ansible_facts.packages'
  tags:
  - CCE-90586-9
  - DISA-STIG-RHEL-09-412015
  - configure_bashrc_exec_tmux
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: 'Support session locking with tmux: Insert the Correct Script into /etc/profile.d/tmux.sh'
  ansible.builtin.blockinfile:
    path: /etc/profile.d/tmux.sh
    block: |
      if [ "$PS1" ]; then
        parent=$(ps -o ppid= -p $$)
        name=$(ps -o comm= -p $parent)
        case "$name" in sshd|login) exec tmux ;; esac
      fi
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"tmux" in ansible_facts.packages'
  - tmux_in_bashrc is defined and tmux_in_bashrc.matched == 0
  - tmux_in_profile_d is defined and tmux_in_profile_d.matched == 0
  tags:
  - CCE-90586-9
  - DISA-STIG-RHEL-09-412015
  - configure_bashrc_exec_tmux
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

check tmux is configured to exec on the last line of /etc/bashrc  oval:ssg-test_configure_bashrc_exec_tmux:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_configure_bashrc_exec_tmux:obj:1 of type textfilecontent54_object
BehaviorsFilepathPatternInstance
no value^/etc/bashrc$|^/etc/profile\.d/.*$if \[ "\$PS1" \]; then\n\s+parent=\$\(ps -o ppid= -p \$\$\)\n\s+name=\$\(ps -o comm= -p \$parent\)\n\s+case "\$name" in sshd\|login\) exec tmux ;; esac\nfi1
Configure tmux to lock session after inactivityxccdf_org.ssgproject.content_rule_configure_tmux_lock_after_time mediumCCE-89876-7

Configure tmux to lock session after inactivity

Rule IDxccdf_org.ssgproject.content_rule_configure_tmux_lock_after_time
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_tmux_lock_after_time:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89876-7

References:  CCI-000057, CCI-000060, FMT_SMF_EXT.1, FMT_MOF_EXT.1, FTA_SSL.1, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012, RHEL-09-412025, SV-258066r926185_rule

Description
To enable console screen locking in tmux terminal multiplexer after a period of inactivity, the lock-after-time option has to be set to a value greater than 0 and less than or equal to 900 in /etc/tmux.conf.
Rationale
Locking the session after a period of inactivity limits the potential exposure if the session is left unattended.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

tmux_conf="/etc/tmux.conf"

if grep -qP '^\s*set\s+-g\s+lock-after-time' "$tmux_conf" ; then
    sed -i 's/^\s*set\s\+-g\s\+lock-after-time.*$/set -g lock-after-time 900/' "$tmux_conf"
else
    echo "set -g lock-after-time 900" >> "$tmux_conf"
fi
chmod 0644 "$tmux_conf"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Configure tmux to lock session after inactivity
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/tmux.conf
      create: false
      regexp: ^\s*set -g lock-after-time\s+
      mode: '0644'
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/tmux.conf
    lineinfile:
      path: /etc/tmux.conf
      create: false
      regexp: ^\s*set -g lock-after-time\s+
      mode: '0644'
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/tmux.conf
    lineinfile:
      path: /etc/tmux.conf
      create: true
      regexp: ^\s*set -g lock-after-time\s+
      mode: '0644'
      line: set -g lock-after-time 900
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89876-7
  - DISA-STIG-RHEL-09-412025
  - configure_tmux_lock_after_time
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check lock-after-time is set to 900 in /etc/tmux.conf  oval:ssg-test_configure_tmux_lock_after_time:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_configure_tmux_lock_after_time:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/tmux.conf^\s*set\s+-g\s+lock-after-time\s+(\d+)\s*(?:#.*)?$1

Check /etc/tmux.conf is readable by others  oval:ssg-test_tmux_conf_readable_by_others:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_tmux_conf_readable_by_others:obj:1 of type file_object
Filepath
/etc/tmux.conf
Configure the tmux Lock Commandxccdf_org.ssgproject.content_rule_configure_tmux_lock_command mediumCCE-90171-0

Configure the tmux Lock Command

Rule IDxccdf_org.ssgproject.content_rule_configure_tmux_lock_command
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_tmux_lock_command:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90171-0

References:  CCI-000056, CCI-000058, AC-11(a), AC-11(b), CM-6(a), FMT_SMF_EXT.1, FMT_MOF_EXT.1, FTA_SSL.1, SRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011, RHEL-09-412020, SV-258065r926182_rule

Description
To enable console screen locking in tmux terminal multiplexer, the vlock command must be configured to be used as a locking mechanism. Add the following line to /etc/tmux.conf:
set -g lock-command vlock
. The console can now be locked with the following key combination:
ctrl+b :lock-session
Rationale
The tmux package allows for a session lock to be implemented and configured. However, the session lock is implemented by an external command. The tmux default configuration does not contain an effective session lock.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

tmux_conf="/etc/tmux.conf"

if grep -qP '^\s*set\s+-g\s+lock-command' "$tmux_conf" ; then
    sed -i 's/^\s*set\s\+-g\s\+lock-command.*$/set -g lock-command vlock/' "$tmux_conf"
else
    echo "set -g lock-command vlock" >> "$tmux_conf"
fi
chmod 0644 "$tmux_conf"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Configure the tmux Lock Command
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/tmux.conf
      create: false
      regexp: ^\s*set -g lock-command\s+
      mode: '0644'
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/tmux.conf
    lineinfile:
      path: /etc/tmux.conf
      create: false
      regexp: ^\s*set -g lock-command\s+
      mode: '0644'
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/tmux.conf
    lineinfile:
      path: /etc/tmux.conf
      create: true
      regexp: ^\s*set -g lock-command\s+
      mode: '0644'
      line: set -g lock-command vlock
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90171-0
  - DISA-STIG-RHEL-09-412020
  - NIST-800-53-AC-11(a)
  - NIST-800-53-AC-11(b)
  - NIST-800-53-CM-6(a)
  - configure_tmux_lock_command
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

check lock-command is set to vlock in /etc/tmux.conf  oval:ssg-test_configure_tmux_lock_command:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_configure_tmux_lock_command:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/tmux.conf^\s*set\s+-g\s+lock-command\s+vlock\s*(?:#.*)?$1

Check /etc/tmux.conf is readable by others  oval:ssg-test_tmux_conf_readable_by_others:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_tmux_conf_readable_by_others:obj:1 of type file_object
Filepath
/etc/tmux.conf
Prevent user from disabling the screen lockxccdf_org.ssgproject.content_rule_no_tmux_in_shells lowCCE-89538-3

Prevent user from disabling the screen lock

Rule IDxccdf_org.ssgproject.content_rule_no_tmux_in_shells
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-no_tmux_in_shells:def:1
Time2024-01-08T16:20:25+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-89538-3

References:  CCI-000056, CCI-000058, CM-6, FMT_SMF_EXT.1, FMT_MOF_EXT.1, FTA_SSL.1, SRG-OS-000324-GPOS-00125, SRG-OS-000028-GPOS-00009, SRG-OS-000030-GPOS-00011, RHEL-09-412030, SV-258067r926188_rule

Description
The tmux terminal multiplexer is used to implement automatic session locking. It should not be listed in /etc/shells.
Rationale
Not listing tmux among permitted shells prevents malicious program running as user from lowering security by disabling the screen lock.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if grep -q 'tmux\s*$' /etc/shells ; then
	sed -i '/tmux\s*$/d' /etc/shells
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,/bin/sh%0A/bin/bash%0A/usr/bin/sh%0A/usr/bin/bash%0A
        mode: 0644
        path: /etc/shells
        overwrite: true
OVAL test results details

check that tmux is not listed in /etc/shells  oval:ssg-test_no_tmux_in_shells:tst:1  false

Following items have been found on the system:
PathContent
/etc/shellstmux
Install the opensc Package For Multifactor Authenticationxccdf_org.ssgproject.content_rule_package_opensc_installed mediumCCE-83595-9

Install the opensc Package For Multifactor Authentication

Rule IDxccdf_org.ssgproject.content_rule_package_opensc_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_opensc_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83595-9

References:  CCI-001954, CCI-001953, 1382, 1384, 1386, CM-6(a), SRG-OS-000375-GPOS-00160, SRG-OS-000376-GPOS-00161, RHEL-09-611185, SV-258126r926365_rule

Description
The opensc package can be installed with the following command:
$ sudo dnf install opensc
Rationale
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
OVAL test results details

package opensc is installed  oval:ssg-test_package_opensc_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openscx86_64(none)3.el9_30.23.00:0.23.0-3.el9_3199e2f91fd431d51opensc-0:0.23.0-3.el9_3.x86_64
Install the pcsc-lite packagexccdf_org.ssgproject.content_rule_package_pcsc-lite_installed mediumCCE-86280-5

Install the pcsc-lite package

Rule IDxccdf_org.ssgproject.content_rule_package_pcsc-lite_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_pcsc-lite_installed:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86280-5

References:  CCI-001954, 1382, 1384, 1386, CM-6(a), SRG-OS-000375-GPOS-00160, RHEL-09-611175, SV-258124r926359_rule

Description
The pcsc-lite package can be installed with the following command:
$ sudo dnf install pcsc-lite
Rationale
The pcsc-lite package must be installed if it is to be available for multifactor authentication using smartcards.
OVAL test results details

package pcsc-lite is installed  oval:ssg-test_package_pcsc-lite_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
pcsc-litex86_64(none)1.el91.9.40:1.9.4-1.el9199e2f91fd431d51pcsc-lite-0:1.9.4-1.el9.x86_64
Install Smart Card Packages For Multifactor Authenticationxccdf_org.ssgproject.content_rule_install_smartcard_packages mediumCCE-83596-7

Install Smart Card Packages For Multifactor Authentication

Rule IDxccdf_org.ssgproject.content_rule_install_smartcard_packages
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-install_smartcard_packages:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83596-7

References:  CCI-000765, CCI-001948, CCI-001953, CCI-001954, CM-6(a), Req-8.3, 8.4, SRG-OS-000105-GPOS-00052, SRG-OS-000375-GPOS-00160, SRG-OS-000375-GPOS-00161, SRG-OS-000377-GPOS-00162, RHEL-09-215075, SV-257838r925501_rule

Description
Configure the operating system to implement multifactor authentication by installing the required package with the following command: The openssl-pkcs11 package can be installed with the following command:
$ sudo dnf install openssl-pkcs11
Rationale
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
OVAL test results details

package openssl-pkcs11 is installed  oval:ssg-test_package_openssl-pkcs11_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssl-pkcs11x86_64(none)7.el90.4.110:0.4.11-7.el9199e2f91fd431d51openssl-pkcs11-0:0.4.11-7.el9.x86_64
Enable the pcscd Servicexccdf_org.ssgproject.content_rule_service_pcscd_enabled mediumCCE-87907-2

Enable the pcscd Service

Rule IDxccdf_org.ssgproject.content_rule_service_pcscd_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_pcscd_enabled:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87907-2

References:  CCI-001954, 1382, 1384, 1386, IA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a), Req-8.3, 8.4, SRG-OS-000375-GPOS-00160, RHEL-09-611180, SV-258125r926362_rule

Description
The pcscd service can be enabled with the following command:
$ sudo systemctl enable pcscd.service
Rationale
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
OVAL test results details

package pcsc-lite is installed  oval:ssg-test_service_pcscd_package_pcsc-lite_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
pcsc-litex86_64(none)1.el91.9.40:1.9.4-1.el9199e2f91fd431d51pcsc-lite-0:1.9.4-1.el9.x86_64

Test that the pcscd service is running  oval:ssg-test_service_running_pcscd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
pcscd.socketActiveStateactive
pcscd.serviceActiveStateinactive

systemd test  oval:ssg-test_multi_user_wants_pcscd:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_pcscd_socket:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Configure opensc Smart Card Driversxccdf_org.ssgproject.content_rule_configure_opensc_card_drivers mediumCCE-89122-6

Configure opensc Smart Card Drivers

Rule IDxccdf_org.ssgproject.content_rule_configure_opensc_card_drivers
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_opensc_card_drivers:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89122-6

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000765, CCI-000766, CCI-000767, CCI-000768, CCI-000771, CCI-000772, CCI-000884, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 1382, 1384, 1386, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-2(1), IA-2(2), IA-2(3), IA-2(4), IA-2(6), IA-2(7), IA-2(11), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.3, 8.4, SRG-OS-000104-GPOS-00051, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000109-GPOS-00056, SRG-OS-000108-GPOS-00055, SRG-OS-000108-GPOS-00057, SRG-OS-000108-GPOS-00058, RHEL-09-611160, SV-258121r926350_rule

Description
The OpenSC smart card tool can auto-detect smart card drivers; however, setting the smart card drivers in use by your organization helps to prevent users from using unauthorized smart cards. The default smart card driver for this profile is cac. To configure the OpenSC driver, edit the /etc/opensc.conf and add the following line into the file in the app default block, so it will look like:
app default {
   ...
   card_drivers = cac;
}
Rationale
Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials. Configuring the smart card driver in use by your organization helps to prevent users from using unauthorized smart cards.

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_smartcard_drivers='cac'


OPENSC_TOOL="/usr/bin/opensc-tool"

if [ -f "${OPENSC_TOOL}" ]; then
    ${OPENSC_TOOL} -S app:default:card_drivers:$var_smartcard_drivers
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_smartcard_drivers # promote to variable
  set_fact:
    var_smartcard_drivers: !!str cac
  tags:
    - always

- name: Check existence of opensc conf
  stat:
    path: /etc/opensc-{{ ansible_architecture }}.conf
  register: opensc_conf_cd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89122-6
  - DISA-STIG-RHEL-09-611160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - PCI-DSSv4-8.4
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure smartcard driver block
  block:

  - name: Check if card_drivers is defined
    command: /usr/bin/opensc-tool -G app:default:card_drivers
    changed_when: false
    register: card_drivers

  - name: Configure opensc Smart Card Drivers
    command: |
      /usr/bin/opensc-tool -S app:default:card_drivers:{{ var_smartcard_drivers }}
    when:
    - card_drivers.stdout != var_smartcard_drivers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - opensc_conf_cd.stat.exists
  tags:
  - CCE-89122-6
  - DISA-STIG-RHEL-09-611160
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-2(1)
  - NIST-800-53-IA-2(11)
  - NIST-800-53-IA-2(2)
  - NIST-800-53-IA-2(3)
  - NIST-800-53-IA-2(4)
  - NIST-800-53-IA-2(6)
  - NIST-800-53-IA-2(7)
  - PCI-DSS-Req-8.3
  - PCI-DSSv4-8.4
  - configure_opensc_card_drivers
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

Check that card_drivers is configured for opensc  oval:ssg-test_configure_opensc_card_drivers:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_configure_opensc_card_drivers:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/opensc.*\.conf$^[\s]+card_drivers[\s]+=[\s]+(\S+);$1
Disable debug-shell SystemD Servicexccdf_org.ssgproject.content_rule_service_debug-shell_disabled mediumCCE-90724-6

Disable debug-shell SystemD Service

Rule IDxccdf_org.ssgproject.content_rule_service_debug-shell_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-service_debug-shell_disabled:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90724-6

References:  3.4.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), CM-6, FIA_UAU.1, SRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227, RHEL-09-211055, SV-257786r925345_rule

Description
SystemD's debug-shell service is intended to diagnose SystemD related boot issues with various systemctl commands. Once enabled and following a system reboot, the root shell will be available on tty9 which is access by pressing CTRL-ALT-F9. The debug-shell service should only be used for SystemD related issues and should otherwise be disabled.

By default, the debug-shell SystemD service is already disabled. The debug-shell service can be disabled with the following command:
$ sudo systemctl mask --now debug-shell.service
Rationale
This prevents attackers with physical access from trivially bypassing security on the machine through valid troubleshooting configurations and gaining root access when the system is rebooted.

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'debug-shell.service'
"$SYSTEMCTL_EXEC" disable 'debug-shell.service'
"$SYSTEMCTL_EXEC" mask 'debug-shell.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files debug-shell.socket; then
    "$SYSTEMCTL_EXEC" stop 'debug-shell.socket'
    "$SYSTEMCTL_EXEC" mask 'debug-shell.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'debug-shell.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Block Disable service debug-shell
  block:

  - name: Disable service debug-shell
    block:

    - name: Disable service debug-shell
      systemd:
        name: debug-shell.service
        enabled: 'no'
        state: stopped
        masked: 'yes'
    rescue:

    - name: Intentionally ignored previous 'Disable service debug-shell' failure,
        service was already disabled
      meta: noop
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90724-6
  - DISA-STIG-RHEL-09-211055
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Unit Socket Exists - debug-shell.socket
  command: systemctl -q list-unit-files debug-shell.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90724-6
  - DISA-STIG-RHEL-09-211055
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

- name: Disable socket debug-shell
  systemd:
    name: debug-shell.socket
    enabled: 'no'
    state: stopped
    masked: 'yes'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - socket_file_exists.stdout_lines is search("debug-shell.socket",multiline=True)
  tags:
  - CCE-90724-6
  - DISA-STIG-RHEL-09-211055
  - NIST-800-171-3.4.5
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_debug-shell_disabled

Complexity:low
Disruption:low
Reboot:false
Strategy:enable
include disable_debug-shell

class disable_debug-shell {
  service {'debug-shell':
    enable => false,
    ensure => 'stopped',
  }
}

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
      - enabled: false
        name: debug-shell.service


[customizations.services]
disabled = ["debug-shell"]
OVAL test results details

package systemd is removed  oval:ssg-test_service_debug-shell_package_systemd_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
systemdx86_64(none)18.el92520:252-18.el9199e2f91fd431d51systemd-0:252-18.el9.x86_64

Test that the debug-shell service is not running  oval:ssg-test_service_not_running_debug-shell:tst:1  true

Following items have been found on the system:
UnitPropertyValue
debug-shell.serviceActiveStateinactive

Test that the property LoadState from the service debug-shell is masked  oval:ssg-test_service_loadstate_is_masked_debug-shell:tst:1  false

Following items have been found on the system:
UnitPropertyValue
debug-shell.serviceLoadStateloaded
Disable Ctrl-Alt-Del Burst Actionxccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction highCCE-90308-8

Disable Ctrl-Alt-Del Burst Action

Rule IDxccdf_org.ssgproject.content_rule_disable_ctrlaltdel_burstaction
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-disable_ctrlaltdel_burstaction:def:1
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-90308-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), CM-6(a), PR.AC-4, PR.DS-5, FAU_GEN.1.2, SRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227, RHEL-09-211045, SV-257784r925339_rule

Description
By default, SystemD will reboot the system if the Ctrl-Alt-Del key sequence is pressed Ctrl-Alt-Delete more than 7 times in 2 seconds.

To configure the system to ignore the CtrlAltDelBurstAction setting, add or modify the following to /etc/systemd/system.conf:
CtrlAltDelBurstAction=none
Rationale
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Warnings
warning  Disabling the Ctrl-Alt-Del key sequence in /etc/init/control-alt-delete.conf DOES NOT disable the Ctrl-Alt-Del key sequence if running in runlevel 6 (e.g. in GNOME, KDE, etc.)! The Ctrl-Alt-Del key sequence will only be disabled if running in the non-graphical runlevel 3.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q systemd; }; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^CtrlAltDelBurstAction=")

# shellcheck disable=SC2059
printf -v formatted_output "%s=%s" "$stripped_key" "none"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^CtrlAltDelBurstAction=\\>" "/etc/systemd/system.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^CtrlAltDelBurstAction=\\>.*/$escaped_formatted_output/gi" "/etc/systemd/system.conf"
else
    if [[ -s "/etc/systemd/system.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/systemd/system.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/systemd/system.conf"
    fi
    cce="CCE-90308-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/systemd/system.conf" >> "/etc/systemd/system.conf"
    printf '%s\n' "$formatted_output" >> "/etc/systemd/system.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90308-8
  - DISA-STIG-RHEL-09-211045
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_burstaction
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

- name: Disable Ctrl-Alt-Del Burst Action
  lineinfile:
    dest: /etc/systemd/system.conf
    state: present
    regexp: ^CtrlAltDelBurstAction
    line: CtrlAltDelBurstAction=none
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"systemd" in ansible_facts.packages'
  tags:
  - CCE-90308-8
  - DISA-STIG-RHEL-09-211045
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_burstaction
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,CtrlAltDelBurstAction%3Dnone
        mode: 0644
        path: /etc/systemd/system.conf.d/disable_ctrlaltdelete_burstaction.conf
        overwrite: true
OVAL test results details

check if CtrlAltDelBurstAction is set to none  oval:ssg-test_disable_ctrlaltdel_burstaction:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_disable_ctrlaltdel_burstaction:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/systemd/system.conf(\.d/.*\.conf)?$^[\s]*CtrlAltDelBurstAction[\s]*=[\s]*none$1
Disable Ctrl-Alt-Del Reboot Activationxccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot highCCE-86667-3

Disable Ctrl-Alt-Del Reboot Activation

Rule IDxccdf_org.ssgproject.content_rule_disable_ctrlaltdel_reboot
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-disable_ctrlaltdel_reboot:def:1
Time2024-01-08T16:20:25+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-86667-3

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, FAU_GEN.1.2, SRG-OS-000324-GPOS-00125, SRG-OS-000480-GPOS-00227, RHEL-09-211050, SV-257785r925342_rule

Description
By default, SystemD will reboot the system if the Ctrl-Alt-Del key sequence is pressed.

To configure the system to ignore the Ctrl-Alt-Del key sequence from the command line instead of rebooting the system, do either of the following:
ln -sf /dev/null /etc/systemd/system/ctrl-alt-del.target
or
systemctl mask ctrl-alt-del.target


Do not simply delete the /usr/lib/systemd/system/ctrl-alt-del.service file, as this file may be restored during future system updates.
Rationale
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

systemctl disable --now ctrl-alt-del.target
systemctl mask --now ctrl-alt-del.target

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Disable Ctrl-Alt-Del Reboot Activation
  systemd:
    name: ctrl-alt-del.target
    force: true
    masked: true
    state: stopped
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86667-3
  - DISA-STIG-RHEL-09-211050
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - disable_ctrlaltdel_reboot
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
      - name: ctrl-alt-del.target
        mask: true
OVAL test results details

Disable Ctrl-Alt-Del key sequence override exists  oval:ssg-test_disable_ctrlaltdel_exists:tst:1  false

Following items have been found on the system:
FilepathCanonical path
/etc/systemd/system/ctrl-alt-del.target/usr/lib/systemd/system/reboot.target
Verify that Interactive Boot is Disabledxccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot mediumCCE-87114-5

Verify that Interactive Boot is Disabled

Rule IDxccdf_org.ssgproject.content_rule_grub2_disable_interactive_boot
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_disable_interactive_boot:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87114-5

References:  11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.2, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, SC-2(1), CM-6(a), PR.AC-4, PR.AC-6, PR.PT-3, FIA_UAU.1, SRG-OS-000480-GPOS-00227, RHEL-09-212015, SV-257788r925351_rule

Description
Red Hat Enterprise Linux 9 systems support an "interactive boot" option that can be used to prevent services from being started. On a Red Hat Enterprise Linux 9 system, interactive boot can be enabled by providing a 1, yes, true, or on value to the systemd.confirm_spawn kernel argument in /etc/default/grub. Remove any instance of
systemd.confirm_spawn=(1|yes|true|on)
from the kernel arguments in that file to disable interactive boot. Recovery booting must also be disabled. Confirm that GRUB_DISABLE_RECOVERY=true is set in /etc/default/grub. It is also required to change the runtime configuration, run:
/sbin/grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"
grub2-mkconfig -o /boot/grub2/grub.cfg
Rationale
Using interactive or recovery boot, the console user could disable auditing, firewalls, or other services, weakening system security.
OVAL test results details

Check systemd.confirm_spawn=(1|true|yes|on) not in GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_disable_interactive_boot_grub_cmdline_linux:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_disable_interactive_boot_grub_cmdline_linux:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX="(?:.*\s)?systemd\.confirm_spawn(?:=(?:1|yes|true|on))?(?:\s.*)?"$1

Check systemd.confirm_spawn=(1|true|yes|on) not in GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_disable_interactive_boot_grub_cmdline_linux_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_disable_interactive_boot_grub_cmdline_linux_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT=".*systemd\.confirm_spawn=(?:1|yes|true|on).*$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Configure Logind to terminate idle sessions after certain time of inactivityxccdf_org.ssgproject.content_rule_logind_session_timeout mediumCCE-90785-7

Configure Logind to terminate idle sessions after certain time of inactivity

Rule IDxccdf_org.ssgproject.content_rule_logind_session_timeout
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-logind_session_timeout:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90785-7

References:  BP28(R29), 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CM-6(a), AC-17(a), AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, FMT_SMF_EXT.1.1, Req-8.1.8, SRG-OS-000163-GPOS-00072, RHEL-09-412080, SV-258077r926218_rule

Description
To configure logind service to terminate inactive user sessions after 300 seconds, edit the file /etc/systemd/logind.conf. Ensure that there is a section
[Login]
which contains the configuration
StopIdleSessionSec=300
.
Rationale
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { ( grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="8.7"; printf "%s\n%s" "$expected" "$real" | sort -VC; } && grep -qP "^ID=[\"']?rhel[\"']?$" "/etc/os-release" && { real="$(grep -P "^VERSION_ID=[\"']?[\w.]+[\"']?$" /etc/os-release | sed "s/^VERSION_ID=[\"']\?\([^\"']\+\)[\"']\?$/\1/")"; expected="9.0"; [[ "$real" != "$expected" ]]; } ); }; then

var_logind_session_timeout='300'



# Try find '[Login]' and 'StopIdleSessionSec' in '/etc/systemd/logind.conf', if it exists, set
# to '$var_logind_session_timeout', if it isn't here, add it, if '[Login]' doesn't exist, add it there
if grep -qzosP '[[:space:]]*\[Login]([^\n\[]*\n+)+?[[:space:]]*StopIdleSessionSec' '/etc/systemd/logind.conf'; then
    
    sed -i "s/StopIdleSessionSec[^(\n)]*/StopIdleSessionSec=$var_logind_session_timeout/" '/etc/systemd/logind.conf'
elif grep -qs '[[:space:]]*\[Login]' '/etc/systemd/logind.conf'; then
    sed -i "/[[:space:]]*\[Login]/a StopIdleSessionSec=$var_logind_session_timeout" '/etc/systemd/logind.conf'
else
    if test -d "/etc/systemd"; then
        printf '%s\n' '[Login]' "StopIdleSessionSec=$var_logind_session_timeout" >> '/etc/systemd/logind.conf'
    else
        echo "Config file directory '/etc/systemd' doesnt exist, not remediating, assuming non-applicability." >&2
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: XCCDF Value var_logind_session_timeout # promote to variable
  set_fact:
    var_logind_session_timeout: !!str 300
  tags:
    - always

- name: Set 'StopIdleSessionSec' to '{{ var_logind_session_timeout }}' in the [Login]
    section of '/etc/systemd/logind.conf'
  ini_file:
    path: /etc/systemd/logind.conf
    section: Login
    option: StopIdleSessionSec
    value: '{{ var_logind_session_timeout }}'
    create: true
    mode: 420
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( ansible_distribution == 'RedHat' and ansible_distribution_version is version('8.7',
    '>=') and ansible_distribution == 'RedHat' and ansible_distribution_version is
    version('9.0', '!=') )
  tags:
  - CCE-90785-7
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-412080
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - logind_session_timeout
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

tests the value of StopIdleSessionSec setting in the /etc/systemd/logind.conf file  oval:ssg-test_logind_session_timeout:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_logind_session_timeout:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/systemd/logind.conf^\s*\[Login\].*(?:\n\s*[^[\s].*)*\n^\s*StopIdleSessionSec[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1

The configuration file /etc/systemd/logind.conf exists for logind_session_timeout  oval:ssg-test_logind_session_timeout_config_file_exists:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/systemd/logind.confregular001538rw-r--r-- 
Require Authentication for Emergency Systemd Targetxccdf_org.ssgproject.content_rule_require_emergency_target_auth mediumCCE-83592-6

Require Authentication for Emergency Systemd Target

Rule IDxccdf_org.ssgproject.content_rule_require_emergency_target_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-require_emergency_target_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83592-6

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-09-611195, SV-258128r926371_rule

Description
Emergency mode is intended as a system recovery method, providing a single user root access to the system during a failed boot sequence.

By default, Emergency mode is protected by requiring a password and is set in /usr/lib/systemd/system/emergency.service.
Rationale
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
OVAL test results details

Tests that /usr/lib/systemd/systemd-sulogin-shell was not removed from the default systemd emergency.service to ensure that a password must be entered to access single user mode  oval:ssg-test_require_emergency_service:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/emergency.serviceExecStart=-/usr/lib/systemd/systemd-sulogin-shell emergency

Tests that the systemd emergency.service is in the emergency.target  oval:ssg-test_require_emergency_service_emergency_target:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/emergency.targetRequires=emergency.service

look for emergency.target in /etc/systemd/system  oval:ssg-test_no_custom_emergency_target:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_no_custom_emergency_target:obj:1 of type file_object
BehaviorsPathFilename
no value/etc/systemd/system^emergency.target$

look for emergency.service in /etc/systemd/system  oval:ssg-test_no_custom_emergency_service:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_no_custom_emergency_service:obj:1 of type file_object
BehaviorsPathFilename
no value/etc/systemd/system^emergency.service$
Require Authentication for Single User Modexccdf_org.ssgproject.content_rule_require_singleuser_auth mediumCCE-83594-2

Require Authentication for Single User Mode

Rule IDxccdf_org.ssgproject.content_rule_require_singleuser_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-require_singleuser_auth:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83594-2

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-09-611200, SV-258129r926374_rule

Description
Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.
Rationale
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
OVAL test results details

Tests that /usr/lib/systemd/systemd-sulogin-shell was not removed from the default systemd rescue.service to ensure that a password must be entered to access single user mode  oval:ssg-test_require_rescue_service:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/rescue.serviceExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue

Tests that the systemd rescue.service is in the runlevel1.target  oval:ssg-test_require_rescue_service_runlevel1:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/runlevel1.targetRequires=sysinit.target rescue.service

look for runlevel1.target in /etc/systemd/system  oval:ssg-test_no_custom_runlevel1_target:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_no_custom_runlevel1_target:obj:1 of type file_object
BehaviorsPathFilename
no value/etc/systemd/system^runlevel1.target$

look for rescue.service in /etc/systemd/system  oval:ssg-test_no_custom_rescue_service:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_no_custom_rescue_service:obj:1 of type file_object
BehaviorsPathFilename
no value/etc/systemd/system^rescue.service$
Set Existing Passwords Maximum Agexccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing mediumCCE-86031-2

Set Existing Passwords Maximum Age

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_set_max_life_existing:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86031-2

References:  A.5.SEC-RHEL5, CCI-000199, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000076-GPOS-00044, RHEL-09-411015, 5.6.1.1, SV-258042r926113_rule

Description
Configure non-compliant accounts to enforce a 60-day maximum password lifetime restriction by running the following command:
$ sudo chage -M 60 USER
Rationale
Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_maximum_age_login_defs='60'


while IFS= read -r i; do
    
    chage -M $var_accounts_maximum_age_login_defs $i

done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: !!str 60
  tags:
    - always

- name: Collect users with not correct maximum time period between password changes
  ansible.builtin.command:
    cmd: awk -F':' '(/^[^:]+:[^!*]/ && ($5 > {{ var_accounts_maximum_age_login_defs
      }} || $5 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-86031-2
  - DISA-STIG-RHEL-09-411015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the maximum time period between password changes
  ansible.builtin.user:
    user: '{{ item }}'
    password_expire_max: '{{ var_accounts_maximum_age_login_defs }}'
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-86031-2
  - DISA-STIG-RHEL-09-411015
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_max_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Compares a specific field in /etc/shadow with a specific variable value  oval:ssg-test_accounts_password_set_max_life_existing_password_max_life_existing:tst:1  false

Following items have been found on the system:
PathContent
/etc/shadowcore:$6$B05Nu/2TwSZDmy2e$w5eEfxlSHtd872DN6rSgjholjaGw5jJPF/NqftToFYQpGOVIetFVTp.K2JonKTUnTEqUANWiy5KwZX2LPJYW0/::0:99999:7:::

Compares a specific field in /etc/shadow with a specific variable value  oval:ssg-test_accounts_password_set_max_life_existing_password_max_life_existing_minimum:tst:1  true

Following items have been found on the system:
PathContent
/etc/shadowcore:$6$B05Nu/2TwSZDmy2e$w5eEfxlSHtd872DN6rSgjholjaGw5jJPF/NqftToFYQpGOVIetFVTp.K2JonKTUnTEqUANWiy5KwZX2LPJYW0/::0:99999:7:::

Passwords must have the maximum password age set non-empty in /etc/shadow.  oval:ssg-test_accounts_password_set_max_life_existing_password_max_life_not_empty:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_set_max_life_existing_shadow_password_users_max_life_not_existing:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/shadow^(?:[^:]*:)(?:[^\!\*:]+:)(?:[^:]*:){2}():(?:[^:]*:){3}(?:[^:]*)$1
Set Existing Passwords Minimum Agexccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing mediumCCE-89069-9

Set Existing Passwords Minimum Age

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_set_min_life_existing:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89069-9

References:  A.5.SEC-RHEL5, CCI-000198, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000075-GPOS-00043, RHEL-09-611080, 5.6.1.2, SV-258105r926302_rule

Description
Configure non-compliant accounts to enforce a 24 hours/1 day minimum password lifetime by running the following command:
$ sudo chage -m 1 USER
Rationale
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_minimum_age_login_defs='1'


while IFS= read -r i; do
    
    chage -m $var_accounts_minimum_age_login_defs $i

done <   <(awk -v var="$var_accounts_minimum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($4 < var || $4 == "")) {print $1}' /etc/shadow)

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: !!str 1
  tags:
    - always

- name: Collect users with not correct minimum time period between password changes
  command: |
    awk -F':' '(/^[^:]+:[^!*]/ && ($4 < {{ var_accounts_minimum_age_login_defs }} || $4 == "")) {print $1}' /etc/shadow
  register: user_names
  tags:
  - CCE-89069-9
  - DISA-STIG-RHEL-09-611080
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Change the minimum time period between password changes
  command: |
    chage -m {{ var_accounts_minimum_age_login_defs }} {{ item }}
  with_items: '{{ user_names.stdout_lines }}'
  when: user_names.stdout_lines | length > 0
  tags:
  - CCE-89069-9
  - DISA-STIG-RHEL-09-611080
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(d)
  - NIST-800-53-IA-5(f)
  - accounts_password_set_min_life_existing
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Compares a specific field in /etc/shadow with a specific variable value  oval:ssg-test_accounts_password_set_min_life_existing_password_max_life_existing:tst:1  true

Following items have been found on the system:
PathContent
/etc/shadowcore:$6$B05Nu/2TwSZDmy2e$w5eEfxlSHtd872DN6rSgjholjaGw5jJPF/NqftToFYQpGOVIetFVTp.K2JonKTUnTEqUANWiy5KwZX2LPJYW0/::0:99999:7:::

Compares a specific field in /etc/shadow with a specific variable value  oval:ssg-test_accounts_password_set_min_life_existing_password_max_life_existing_minimum:tst:1  false

Following items have been found on the system:
PathContent
/etc/shadowcore:$6$B05Nu/2TwSZDmy2e$w5eEfxlSHtd872DN6rSgjholjaGw5jJPF/NqftToFYQpGOVIetFVTp.K2JonKTUnTEqUANWiy5KwZX2LPJYW0/::0:99999:7:::

Passwords must have the maximum password age set non-empty in /etc/shadow.  oval:ssg-test_accounts_password_set_min_life_existing_password_max_life_not_empty:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_set_min_life_existing_shadow_password_users_max_life_not_existing:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/shadow^(?:[^:]*:)(?:[^\!\*:]+:)(?:[^:]*:)():(?:[^:]*:){4}(?:[^:]*)$1
Verify All Account Password Hashes are Shadowed with SHA512xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512 mediumCCE-89983-1

Verify All Account Password Hashes are Shadowed with SHA512

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_all_shadowed_sha512:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89983-1

References:  CCI-000196, CCI-000803, IA-5(1)(c), IA-5(1).1(v), IA-7, IA-7.1, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, RHEL-09-671015, SV-258231r926680_rule

Description
Verify the operating system requires the shadow password suite configuration be set to encrypt interactive user passwords using a strong cryptographic hash. Check that the interactive user account passwords are using a strong password hash with the following command:
$ sudo cut -d: -f2 /etc/shadow
$6$kcOnRq/5$NUEYPuyL.wghQwWssXRcLRFiiru7f5JPV6GaJhNC2aK5F3PZpE/BCCtwrxRc/AInKMNX3CdMw11m9STiql12f/
Password hashes ! or * indicate inactive accounts not available for logon and are not evaluated. If any interactive user password hash does not begin with $6, this is a finding.
Rationale
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
OVAL test results details

password hashes are shadowed using sha512  oval:ssg-test_accounts_password_all_shadowed_sha512:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_password_all_shadowed_sha512:obj:1 of type shadow_object
UsernameFilterFilterFilter
.*oval:ssg-state_accounts_password_all_shadowed_has_no_password:ste:1oval:ssg-state_accounts_password_all_shadowed_has_locked_password:ste:1oval:ssg-state_accounts_password_all_shadowed_sha512:ste:1
Set number of Password Hashing Rounds - password-authxccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth mediumCCE-83615-5

Set number of Password Hashing Rounds - password-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_unix_rounds_password_auth:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83615-5

References:  BP28(R68), CCI-000196, SRG-OS-000073-GPOS-00041, RHEL-09-611050, SV-258099r926284_rule

Description
Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the rounds option for the pam_unix PAM module.

In file /etc/pam.d/password-auth append rounds=5000 to the pam_unix.so entry, as shown below:
password sufficient pam_unix.so ...existing_options... rounds=5000
The system's default number of rounds is 5000.
Rationale
Using a higher number of rounds makes password cracking attacks more difficult.
Warnings
warning  Setting a high number of hashing rounds makes it more difficult to brute force the password, but requires more CPU resources to authenticate users.
OVAL test results details

Test if rounds attribute of pam_unix.so is set correctly in /etc/pam.d/password-auth   oval:ssg-test_password_auth_pam_unix_rounds_is_set:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_password_auth_pam_unix_rounds:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/pam.d/password-auth$^\s*password\s+(?:(?:sufficient)|(?:required))\s+pam_unix\.so.*rounds=([0-9]*).*$1

Test if rounds attribute of pam_unix.so is not set in /etc/pam.d/password-auth   oval:ssg-test_password_auth_pam_unix_rounds_is_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_password_auth_pam_unix_rounds:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/pam.d/password-auth$^\s*password\s+(?:(?:sufficient)|(?:required))\s+pam_unix\.so.*rounds=([0-9]*).*$1

Check if value of var_password_pam_unix_rounds is the system's default  oval:ssg-test_password_auth_default_pam_unix_rounds_var:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_password_pam_unix_rounds:var:15000
Set number of Password Hashing Rounds - system-authxccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth mediumCCE-83621-3

Set number of Password Hashing Rounds - system-auth

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_password_pam_unix_rounds_system_auth:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83621-3

References:  BP28(R68), CCI-000196, SRG-OS-000073-GPOS-00041, RHEL-09-611055, SV-258100r926287_rule

Description
Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the rounds option for the pam_unix PAM module.

In file /etc/pam.d/system-auth append rounds=5000 to the pam_unix.so entry, as shown below:
password sufficient pam_unix.so ...existing_options... rounds=5000
The system's default number of rounds is 5000.
Rationale
Using a higher number of rounds makes password cracking attacks more difficult.
Warnings
warning  Setting a high number of hashing rounds makes it more difficult to brute force the password, but requires more CPU resources to authenticate users.
OVAL test results details

Test if rounds attribute of pam_unix.so is set correctly in /etc/pam.d/system-auth  oval:ssg-test_system_auth_pam_unix_rounds_is_set:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_system_auth_pam_unix_rounds:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/pam.d/system-auth$^\s*password\s+(?:(?:sufficient)|(?:required))\s+pam_unix\.so.*rounds=([0-9]*).*$1

Test if rounds attribute of pam_unix.so is not set in /etc/pam.d/system-auth  oval:ssg-test_system_auth_pam_unix_rounds_is_default:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_system_auth_pam_unix_rounds:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/pam.d/system-auth$^\s*password\s+(?:(?:sufficient)|(?:required))\s+pam_unix\.so.*rounds=([0-9]*).*$1

Check if value of var_password_pam_unix_rounds is the system's default  oval:ssg-test_system_auth_default_pam_unix_rounds_var:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_password_pam_unix_rounds:var:15000
All GIDs referenced in /etc/passwd must be defined in /etc/groupxccdf_org.ssgproject.content_rule_gid_passwd_group_same lowCCE-83613-0

All GIDs referenced in /etc/passwd must be defined in /etc/group

Rule IDxccdf_org.ssgproject.content_rule_gid_passwd_group_same
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-gid_passwd_group_same:def:1
Time2024-01-08T16:20:26+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83613-0

References:  1, 12, 15, 16, 5, 5.5.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000764, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.5.a, 8.2.2, SRG-OS-000104-GPOS-00051, RHEL-09-411045, 6.2.3, SV-258048r926131_rule

Description
Add a group to the system for each GID referenced without a corresponding group.
Rationale
If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Group Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.
OVAL test results details

Verify all GIDs referenced in /etc/passwd are defined in /etc/group  oval:ssg-test_gid_passwd_group_same:tst:1  true

Following items have been found on the system:
PathContent
/etc/passwdcore:x:1000:1000:
/etc/passwdsystemd-oom:x:988:988:
/etc/passwdroot:x:0:0:
Prevent Login to Accounts With Empty Passwordxccdf_org.ssgproject.content_rule_no_empty_passwords highCCE-83611-4

Prevent Login to Accounts With Empty Password

Rule IDxccdf_org.ssgproject.content_rule_no_empty_passwords
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-no_empty_passwords:def:1
Time2024-01-08T16:20:26+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83611-4

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-5(1)(a), IA-5(c), CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, FIA_UAU.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000480-GPOS-00227, RHEL-09-611025, 5.4.1, SV-258094r926269_rule

Description
If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.
Rationale
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -f /usr/bin/authselect ]; then
    if ! authselect check; then
echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
exit 1
fi
authselect enable-feature without-nullok

authselect apply-changes -b
else
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/system-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/system-auth"
fi
    
if grep -qP '^\s*auth\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*auth.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
    
if grep -qP '^\s*password\s+'"sufficient"'\s+pam_unix.so\s.*\bnullok\b' "/etc/pam.d/password-auth"; then
    sed -i -E --follow-symlinks 's/(.*password.*'"sufficient"'.*pam_unix.so.*)\snullok=?[[:alnum:]]*(.*)/\1\2/g' "/etc/pam.d/password-auth"
fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: Prevent Login to Accounts With Empty Password - Check if system relies on
    authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83611-4
  - CJIS-5.5.2
  - DISA-STIG-RHEL-09-611025
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate using authselect
  block:

  - name: Prevent Login to Accounts With Empty Password - Check integrity of authselect
      current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Prevent Login to Accounts With Empty Password - Informative message based
      on the authselect integrity check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Prevent Login to Accounts With Empty Password - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Prevent Login to Accounts With Empty Password - Ensure "without-nullok"
      feature is enabled using authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature without-nullok
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("without-nullok")

  - name: Prevent Login to Accounts With Empty Password - Ensure authselect changes
      are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - result_authselect_present.stat.exists
  tags:
  - CCE-83611-4
  - CJIS-5.5.2
  - DISA-STIG-RHEL-09-611025
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

- name: Prevent Login to Accounts With Empty Password - Remediate directly editing
    PAM files
  ansible.builtin.replace:
    dest: '{{ item }}'
    regexp: nullok
  loop:
  - /etc/pam.d/system-auth
  - /etc/pam.d/password-auth
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - not result_authselect_present.stat.exists
  tags:
  - CCE-83611-4
  - CJIS-5.5.2
  - DISA-STIG-RHEL-09-611025
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - configure_strategy
  - high_severity
  - low_complexity
  - medium_disruption
  - no_empty_passwords
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true
OVAL test results details

make sure nullok is not used in /etc/pam.d/system-auth  oval:ssg-test_no_empty_passwords:tst:1  false

Following items have been found on the system:
PathContent
/etc/pam.d/password-authauth required pam_env.so auth sufficient pam_unix.so try_first_pass nullok auth required pam_deny.so account required pam_unix.so password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type= password sufficient pam_unix.so try_first_pass use_authtok nullok sha512 shadow
/etc/pam.d/system-authauth required pam_env.so auth sufficient pam_unix.so try_first_pass nullok auth required pam_deny.so account required pam_unix.so password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type= password sufficient pam_unix.so try_first_pass use_authtok nullok sha512 shadow
Ensure There Are No Accounts With Blank or Null Passwordsxccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow highCCE-85972-8

Ensure There Are No Accounts With Blank or Null Passwords

Rule IDxccdf_org.ssgproject.content_rule_no_empty_passwords_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-no_empty_passwords_etc_shadow:def:1
Time2024-01-08T16:20:26+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-85972-8

References:  A.6.SEC-RHEL4, CCI-000366, CM-6(b), CM-6.1(iv), SRG-OS-000480-GPOS-00227, RHEL-09-611155, 5.6.6, 6.2.2, SV-258120r926347_rule

Description
Check the "/etc/shadow" file for blank passwords with the following command:
$ sudo awk -F: '!$2 {print $1}' /etc/shadow
If the command returns any results, this is a finding. Configure all accounts on the system to have a password or lock the account with the following commands: Perform a password reset:
$ sudo passwd [username]
Lock an account:
$ sudo passwd -l [username]
Rationale
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Warnings
warning  Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
OVAL test results details

make sure there aren't blank or null passwords in /etc/shadow  oval:ssg-test_no_empty_passwords_etc_shadow:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_no_empty_passwords_etc_shadow:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/shadow^[^:]+::.*$1
Verify Only Root Has UID 0xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero highCCE-83624-7

Verify Only Root Has UID 0

Rule IDxccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_no_uid_except_zero:def:1
Time2024-01-08T16:20:26+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83624-7

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-6(5), IA-4(b), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, Req-8.5, 8.2.2, 8.2.3, SRG-OS-000480-GPOS-00227, RHEL-09-411100, 6.2.9, SV-258059r926164_rule

Description
If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.
Rationale
An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
OVAL test results details

test that there are no accounts with UID 0 except root in the /etc/passwd file  oval:ssg-test_accounts_no_uid_except_root:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_no_uid_except_root:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/passwd^(?!root:)[^:]*:[^:]*:01
Ensure that System Accounts Do Not Run a Shell Upon Loginxccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts mediumCCE-83623-9

Ensure that System Accounts Do Not Run a Shell Upon Login

Rule IDxccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-no_shelllogin_for_systemaccounts:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83623-9

References:  A.6.SEC-RHEL3, 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, 1491, A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-6, CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, 8.6.1, SRG-OS-000480-GPOS-00227, RHEL-09-411035, 5.6.2, SV-258046r926125_rule

Description
Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account other than root has a login shell, disable it with the command:
$ sudo usermod -s /sbin/nologin account
Rationale
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Warnings
warning  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
OVAL test results details

SYS_UID_MIN not defined in /etc/login.defs  oval:ssg-test_sys_uid_min_not_defined:tst:1  false

Following items have been found on the system:
PathContent
/etc/login.defs# # Please note that the parameters in this configuration file control the # behavior of the tools from the shadow-utils component. None of these # tools uses the PAM mechanism, and the utilities that use PAM (such as the # passwd command) should therefore be configured elsewhere. Refer to # /etc/pam.d/system-auth for more information. # # # Delay in seconds before being allowed another attempt after a login failure # Note: When PAM is used, some modules may enforce a minimum delay (e.g. # pam_unix(8) enforces a 2s delay) # #FAIL_DELAY 3 # Currently FAILLOG_ENAB is not supported # # Enable display of unknown usernames when login(1) failures are recorded. # #LOG_UNKFAIL_ENAB no # Currently LOG_OK_LOGINS is not supported # Currently LASTLOG_ENAB is not supported # # Limit the highest user ID number for which the lastlog entries should # be updated. # # No LASTLOG_UID_MAX means that there is no user ID limit for writing # lastlog entries. # #LASTLOG_UID_MAX # Currently MAIL_CHECK_ENAB is not supported # Currently OBSCURE_CHECKS_ENAB is not supported # Currently PORTTIME_CHECKS_ENAB is not supported # Currently QUOTAS_ENAB is not supported # Currently SYSLOG_SU_ENAB is not supported # # Enable "syslog" logging of newgrp(1) and sg(1) activity. # #SYSLOG_SG_ENAB yes # Currently CONSOLE is not supported # Currently SULOG_FILE is not supported # Currently MOTD_FILE is not supported # Currently ISSUE_FILE is not supported # Currently TTYTYPE_FILE is not supported # Currently FTMP_FILE is not supported # Currently NOLOGINS_FILE is not supported # Currently SU_NAME is not supported # *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # MAIL_DIR /var/spool/mail #MAIL_FILE .mail # # If defined, file which inhibits all the usual chatter during the login # sequence. If a full pathname, then hushed mode will be enabled if the # user's name or shell are found in the file. If not a full pathname, then # hushed mode will be enabled if the file exists in the user's home directory. # #HUSHLOGIN_FILE .hushlogin #HUSHLOGIN_FILE /etc/hushlogins # Currently ENV_TZ is not supported # Currently ENV_HZ is not supported # # The default PATH settings, for superuser and normal users. # # (they are minimal, add the rest in the shell startup files) #ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin #ENV_PATH PATH=/bin:/usr/bin # # Terminal permissions # # TTYGROUP Login tty will be assigned this group ownership. # TTYPERM Login tty will be set to this permission. # # If you have a write(1) program which is "setgid" to a special group # which owns the terminals, define TTYGROUP as the number of such group # and TTYPERM as 0620. Otherwise leave TTYGROUP commented out and # set TTYPERM to either 622 or 600. # #TTYGROUP tty #TTYPERM 0600 # Currently ERASECHAR, KILLCHAR and ULIMIT are not supported # Default initial "umask" value used by login(1) on non-PAM enabled systems. # Default "umask" value for pam_umask(8) on PAM enabled systems. # UMASK is also used by useradd(8) and newusers(8) to set the mode for new # home directories if HOME_MODE is not set. # 022 is the default value, but 027, or even 077, could be considered # for increased privacy. There is no One True Answer here: each sysadmin # must make up their mind. UMASK 022 # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new # home directories. # If HOME_MODE is not set, the value of UMASK is used to create the mode. HOME_MODE 0700 # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_WARN_AGE 7 # Currently PASS_MIN_LEN is not supported # Currently SU_WHEEL_ONLY is not supported # Currently CRACKLIB_DICTPATH is not supported # # Min/max values for automatic uid selection in useradd(8) # UID_MIN 1000 UID_MAX 60000 # System accounts SYS_UID_MIN 201

SYS_UID_MAX not defined in /etc/login.defs  oval:ssg-test_sys_uid_max_not_defined:tst:1  false

Following items have been found on the system:
PathContent
/etc/login.defs# # Please note that the parameters in this configuration file control the # behavior of the tools from the shadow-utils component. None of these # tools uses the PAM mechanism, and the utilities that use PAM (such as the # passwd command) should therefore be configured elsewhere. Refer to # /etc/pam.d/system-auth for more information. # # # Delay in seconds before being allowed another attempt after a login failure # Note: When PAM is used, some modules may enforce a minimum delay (e.g. # pam_unix(8) enforces a 2s delay) # #FAIL_DELAY 3 # Currently FAILLOG_ENAB is not supported # # Enable display of unknown usernames when login(1) failures are recorded. # #LOG_UNKFAIL_ENAB no # Currently LOG_OK_LOGINS is not supported # Currently LASTLOG_ENAB is not supported # # Limit the highest user ID number for which the lastlog entries should # be updated. # # No LASTLOG_UID_MAX means that there is no user ID limit for writing # lastlog entries. # #LASTLOG_UID_MAX # Currently MAIL_CHECK_ENAB is not supported # Currently OBSCURE_CHECKS_ENAB is not supported # Currently PORTTIME_CHECKS_ENAB is not supported # Currently QUOTAS_ENAB is not supported # Currently SYSLOG_SU_ENAB is not supported # # Enable "syslog" logging of newgrp(1) and sg(1) activity. # #SYSLOG_SG_ENAB yes # Currently CONSOLE is not supported # Currently SULOG_FILE is not supported # Currently MOTD_FILE is not supported # Currently ISSUE_FILE is not supported # Currently TTYTYPE_FILE is not supported # Currently FTMP_FILE is not supported # Currently NOLOGINS_FILE is not supported # Currently SU_NAME is not supported # *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # MAIL_DIR /var/spool/mail #MAIL_FILE .mail # # If defined, file which inhibits all the usual chatter during the login # sequence. If a full pathname, then hushed mode will be enabled if the # user's name or shell are found in the file. If not a full pathname, then # hushed mode will be enabled if the file exists in the user's home directory. # #HUSHLOGIN_FILE .hushlogin #HUSHLOGIN_FILE /etc/hushlogins # Currently ENV_TZ is not supported # Currently ENV_HZ is not supported # # The default PATH settings, for superuser and normal users. # # (they are minimal, add the rest in the shell startup files) #ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin #ENV_PATH PATH=/bin:/usr/bin # # Terminal permissions # # TTYGROUP Login tty will be assigned this group ownership. # TTYPERM Login tty will be set to this permission. # # If you have a write(1) program which is "setgid" to a special group # which owns the terminals, define TTYGROUP as the number of such group # and TTYPERM as 0620. Otherwise leave TTYGROUP commented out and # set TTYPERM to either 622 or 600. # #TTYGROUP tty #TTYPERM 0600 # Currently ERASECHAR, KILLCHAR and ULIMIT are not supported # Default initial "umask" value used by login(1) on non-PAM enabled systems. # Default "umask" value for pam_umask(8) on PAM enabled systems. # UMASK is also used by useradd(8) and newusers(8) to set the mode for new # home directories if HOME_MODE is not set. # 022 is the default value, but 027, or even 077, could be considered # for increased privacy. There is no One True Answer here: each sysadmin # must make up their mind. UMASK 022 # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new # home directories. # If HOME_MODE is not set, the value of UMASK is used to create the mode. HOME_MODE 0700 # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_WARN_AGE 7 # Currently PASS_MIN_LEN is not supported # Currently SU_WHEEL_ONLY is not supported # Currently CRACKLIB_DICTPATH is not supported # # Min/max values for automatic uid selection in useradd(8) # UID_MIN 1000 UID_MAX 60000 # System accounts SYS_UID_MIN 201 SYS_UID_MAX 999

<0, UID_MIN - 1> system UIDs having shell set  oval:ssg-test_shell_defined_default_uid_range:tst:1  true

Following items have been found on the system:
PathContent
/etc/passwdcore:x:1000:1000::/var/home/core:/bin/bash

SYS_UID_MIN not defined in /etc/login.defs  oval:ssg-test_sys_uid_min_not_defined:tst:1  false

Following items have been found on the system:
PathContent
/etc/login.defs# # Please note that the parameters in this configuration file control the # behavior of the tools from the shadow-utils component. None of these # tools uses the PAM mechanism, and the utilities that use PAM (such as the # passwd command) should therefore be configured elsewhere. Refer to # /etc/pam.d/system-auth for more information. # # # Delay in seconds before being allowed another attempt after a login failure # Note: When PAM is used, some modules may enforce a minimum delay (e.g. # pam_unix(8) enforces a 2s delay) # #FAIL_DELAY 3 # Currently FAILLOG_ENAB is not supported # # Enable display of unknown usernames when login(1) failures are recorded. # #LOG_UNKFAIL_ENAB no # Currently LOG_OK_LOGINS is not supported # Currently LASTLOG_ENAB is not supported # # Limit the highest user ID number for which the lastlog entries should # be updated. # # No LASTLOG_UID_MAX means that there is no user ID limit for writing # lastlog entries. # #LASTLOG_UID_MAX # Currently MAIL_CHECK_ENAB is not supported # Currently OBSCURE_CHECKS_ENAB is not supported # Currently PORTTIME_CHECKS_ENAB is not supported # Currently QUOTAS_ENAB is not supported # Currently SYSLOG_SU_ENAB is not supported # # Enable "syslog" logging of newgrp(1) and sg(1) activity. # #SYSLOG_SG_ENAB yes # Currently CONSOLE is not supported # Currently SULOG_FILE is not supported # Currently MOTD_FILE is not supported # Currently ISSUE_FILE is not supported # Currently TTYTYPE_FILE is not supported # Currently FTMP_FILE is not supported # Currently NOLOGINS_FILE is not supported # Currently SU_NAME is not supported # *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # MAIL_DIR /var/spool/mail #MAIL_FILE .mail # # If defined, file which inhibits all the usual chatter during the login # sequence. If a full pathname, then hushed mode will be enabled if the # user's name or shell are found in the file. If not a full pathname, then # hushed mode will be enabled if the file exists in the user's home directory. # #HUSHLOGIN_FILE .hushlogin #HUSHLOGIN_FILE /etc/hushlogins # Currently ENV_TZ is not supported # Currently ENV_HZ is not supported # # The default PATH settings, for superuser and normal users. # # (they are minimal, add the rest in the shell startup files) #ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin #ENV_PATH PATH=/bin:/usr/bin # # Terminal permissions # # TTYGROUP Login tty will be assigned this group ownership. # TTYPERM Login tty will be set to this permission. # # If you have a write(1) program which is "setgid" to a special group # which owns the terminals, define TTYGROUP as the number of such group # and TTYPERM as 0620. Otherwise leave TTYGROUP commented out and # set TTYPERM to either 622 or 600. # #TTYGROUP tty #TTYPERM 0600 # Currently ERASECHAR, KILLCHAR and ULIMIT are not supported # Default initial "umask" value used by login(1) on non-PAM enabled systems. # Default "umask" value for pam_umask(8) on PAM enabled systems. # UMASK is also used by useradd(8) and newusers(8) to set the mode for new # home directories if HOME_MODE is not set. # 022 is the default value, but 027, or even 077, could be considered # for increased privacy. There is no One True Answer here: each sysadmin # must make up their mind. UMASK 022 # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new # home directories. # If HOME_MODE is not set, the value of UMASK is used to create the mode. HOME_MODE 0700 # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_WARN_AGE 7 # Currently PASS_MIN_LEN is not supported # Currently SU_WHEEL_ONLY is not supported # Currently CRACKLIB_DICTPATH is not supported # # Min/max values for automatic uid selection in useradd(8) # UID_MIN 1000 UID_MAX 60000 # System accounts SYS_UID_MIN 201

SYS_UID_MAX not defined in /etc/login.defs  oval:ssg-test_sys_uid_max_not_defined:tst:1  false

Following items have been found on the system:
PathContent
/etc/login.defs# # Please note that the parameters in this configuration file control the # behavior of the tools from the shadow-utils component. None of these # tools uses the PAM mechanism, and the utilities that use PAM (such as the # passwd command) should therefore be configured elsewhere. Refer to # /etc/pam.d/system-auth for more information. # # # Delay in seconds before being allowed another attempt after a login failure # Note: When PAM is used, some modules may enforce a minimum delay (e.g. # pam_unix(8) enforces a 2s delay) # #FAIL_DELAY 3 # Currently FAILLOG_ENAB is not supported # # Enable display of unknown usernames when login(1) failures are recorded. # #LOG_UNKFAIL_ENAB no # Currently LOG_OK_LOGINS is not supported # Currently LASTLOG_ENAB is not supported # # Limit the highest user ID number for which the lastlog entries should # be updated. # # No LASTLOG_UID_MAX means that there is no user ID limit for writing # lastlog entries. # #LASTLOG_UID_MAX # Currently MAIL_CHECK_ENAB is not supported # Currently OBSCURE_CHECKS_ENAB is not supported # Currently PORTTIME_CHECKS_ENAB is not supported # Currently QUOTAS_ENAB is not supported # Currently SYSLOG_SU_ENAB is not supported # # Enable "syslog" logging of newgrp(1) and sg(1) activity. # #SYSLOG_SG_ENAB yes # Currently CONSOLE is not supported # Currently SULOG_FILE is not supported # Currently MOTD_FILE is not supported # Currently ISSUE_FILE is not supported # Currently TTYTYPE_FILE is not supported # Currently FTMP_FILE is not supported # Currently NOLOGINS_FILE is not supported # Currently SU_NAME is not supported # *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # MAIL_DIR /var/spool/mail #MAIL_FILE .mail # # If defined, file which inhibits all the usual chatter during the login # sequence. If a full pathname, then hushed mode will be enabled if the # user's name or shell are found in the file. If not a full pathname, then # hushed mode will be enabled if the file exists in the user's home directory. # #HUSHLOGIN_FILE .hushlogin #HUSHLOGIN_FILE /etc/hushlogins # Currently ENV_TZ is not supported # Currently ENV_HZ is not supported # # The default PATH settings, for superuser and normal users. # # (they are minimal, add the rest in the shell startup files) #ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin #ENV_PATH PATH=/bin:/usr/bin # # Terminal permissions # # TTYGROUP Login tty will be assigned this group ownership. # TTYPERM Login tty will be set to this permission. # # If you have a write(1) program which is "setgid" to a special group # which owns the terminals, define TTYGROUP as the number of such group # and TTYPERM as 0620. Otherwise leave TTYGROUP commented out and # set TTYPERM to either 622 or 600. # #TTYGROUP tty #TTYPERM 0600 # Currently ERASECHAR, KILLCHAR and ULIMIT are not supported # Default initial "umask" value used by login(1) on non-PAM enabled systems. # Default "umask" value for pam_umask(8) on PAM enabled systems. # UMASK is also used by useradd(8) and newusers(8) to set the mode for new # home directories if HOME_MODE is not set. # 022 is the default value, but 027, or even 077, could be considered # for increased privacy. There is no One True Answer here: each sysadmin # must make up their mind. UMASK 022 # HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new # home directories. # If HOME_MODE is not set, the value of UMASK is used to create the mode. HOME_MODE 0700 # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_WARN_AGE 7 # Currently PASS_MIN_LEN is not supported # Currently SU_WHEEL_ONLY is not supported # Currently CRACKLIB_DICTPATH is not supported # # Min/max values for automatic uid selection in useradd(8) # UID_MIN 1000 UID_MAX 60000 # System accounts SYS_UID_MIN 201 SYS_UID_MAX 999

<0, SYS_UID_MIN> system UIDs having shell set  oval:ssg-test_shell_defined_reserved_uid_range:tst:1  true

Following items have been found on the system:
PathContent
/etc/passwdcore:x:1000:1000::/var/home/core:/bin/bash

<SYS_UID_MIN, SYS_UID_MAX> system UIDS having shell set  oval:ssg-test_shell_defined_dynalloc_uid_range:tst:1  true

Following items have been found on the system:
PathContent
/etc/passwdcore:x:1000:1000::/var/home/core:/bin/bash
Enforce usage of pam_wheel for su authenticationxccdf_org.ssgproject.content_rule_use_pam_wheel_for_su mediumCCE-90085-2

Enforce usage of pam_wheel for su authentication

Rule IDxccdf_org.ssgproject.content_rule_use_pam_wheel_for_su
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-use_pam_wheel_for_su:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90085-2

References:  A.5.SEC-RHEL1, FMT_SMF_EXT.1.1, 8.6.1, SRG-OS-000373-GPOS-00156, SRG-OS-000312-GPOS-00123, RHEL-09-432035, SV-258088r926251_rule

Description
To ensure that only users who are members of the wheel group can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su:
auth required pam_wheel.so use_uid
Rationale
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Warnings
warning  Members of "wheel" or GID 0 groups are checked by default if the group option is not set for pam_wheel.so module. Therefore, members of these groups should be manually checked or a different group should be informed according to the site policy.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

# uncomment the option if commented
  sed '/^[[:space:]]*#[[:space:]]*auth[[:space:]]\+required[[:space:]]\+pam_wheel\.so[[:space:]]\+use_uid$/s/^[[:space:]]*#//' -i /etc/pam.d/su

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90085-2
  - DISA-STIG-RHEL-09-432035
  - PCI-DSSv4-8.6.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_for_su

- name: Restrict usage of su command only to members of wheel group
  replace:
    path: /etc/pam.d/su
    regexp: ^[\s]*#[\s]*auth[\s]+required[\s]+pam_wheel\.so[\s]+use_uid$
    replace: auth             required        pam_wheel.so use_uid
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-90085-2
  - DISA-STIG-RHEL-09-432035
  - PCI-DSSv4-8.6.1
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - use_pam_wheel_for_su
OVAL test results details

check /etc/pam.d/su for correct setting  oval:ssg-test_use_pam_wheel_for_su:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_use_pam_wheel_for_su:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/pam.d/su^[\s]*auth[\s]+required[\s]+pam_wheel\.so[\s]+use_uid$1
Only Authorized Local User Accounts Exist on Operating Systemxccdf_org.ssgproject.content_rule_accounts_authorized_local_users mediumCCE-88048-4

Only Authorized Local User Accounts Exist on Operating System

Rule IDxccdf_org.ssgproject.content_rule_accounts_authorized_local_users
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_authorized_local_users:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88048-4

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411095, SV-258058r926161_rule

Description
Enterprise Application tends to use the server or virtual machine exclusively. Besides the default operating system user, there should be only authorized local users required by the installed software groups and applications that exist on the operating system. The authorized user list can be customized in the refine value variable var_accounts_authorized_local_users_regex. OVAL regular expression is used for the user list. Configure the system so all accounts on the system are assigned to an active system, application, or user account. Remove accounts that do not support approved system activities or that allow for a normal user to perform administrative-level actions. To remove unauthorized system accounts, use the following command:
$ sudo userdel unauthorized_user
Rationale
Accounts providing no operational purpose provide additional opportunities for system compromise. Unnecessary accounts include user accounts for individuals not requiring access to the system and application accounts for applications not installed on the system.
Warnings
warning  Automatic remediation of this control is not available due to the unique requirements of each system.
OVAL test results details

query /etc/passwd  oval:ssg-test_accounts_authorized_local_users:tst:1  false

Following items have been found on the system:
PathContent
/etc/passwdsystemd-oom:
/etc/passwdcore:
Ensure All Groups on the System Have Unique Group IDxccdf_org.ssgproject.content_rule_group_unique_id mediumCCE-86043-7

Ensure All Groups on the System Have Unique Group ID

Rule IDxccdf_org.ssgproject.content_rule_group_unique_id
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-group_unique_id:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86043-7

References:  CCI-000764, 8.2.1, SRG-OS-000104-GPOS-00051, RHEL-09-411110, 6.2.5, SV-258061r926170_rule

Description
Change the group name or delete groups, so each has a unique id.
Rationale
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Warnings
warning  Automatic remediation of this control is not available due to the unique requirements of each system.
OVAL test results details

There should not exist duplicate group ids in /etc/passwd  oval:ssg-test_etc_group_no_duplicate_group_ids:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-variable_count_of_all_group_ids:var:15
Ensure the Default Bash Umask is Set Correctlyxccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc mediumCCE-83644-5

Ensure the Default Bash Umask is Set Correctly

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_umask_etc_bashrc:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83644-5

References:  BP28(R35), A.6.SEC-RHEL5, 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, 8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, RHEL-09-412055, 5.6.5, SV-258072r926203_rule

Description
To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows:
umask 077
Rationale
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.


var_accounts_user_umask='077'






grep -q "^\s*umask" /etc/bashrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 077
  tags:
    - always

- name: Check if umask in /etc/bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bashrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - CCE-83644-5
  - DISA-STIG-RHEL-09-412055
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bashrc
  ansible.builtin.replace:
    path: /etc/bashrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - CCE-83644-5
  - DISA-STIG-RHEL-09-412055
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bashrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - CCE-83644-5
  - DISA-STIG-RHEL-09-412055
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Verify the existence of var_accounts_user_umask_as_number variable  oval:ssg-test_existence_of_var_accounts_user_umask_as_number_variable:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_accounts_user_umask_umask_as_number:var:163

Test the retrieved /etc/bashrc umask value(s) match the var_accounts_user_umask requirement  oval:ssg-tst_accounts_umask_etc_bashrc:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_accounts_umask_etc_bashrc:obj:1 of type variable_object
Var ref
oval:ssg-var_etc_bashrc_umask_as_number:var:1
Ensure the Default C Shell Umask is Set Correctlyxccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc mediumCCE-87721-7

Ensure the Default C Shell Umask is Set Correctly

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_umask_etc_csh_cshrc:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87721-7

References:  18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, RHEL-09-412060, SV-258073r926206_rule

Description
To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows:
umask 077
Rationale
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.


var_accounts_user_umask='077'


grep -q "^\s*umask" /etc/csh.cshrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 077
  tags:
    - always

- name: Check if umask in /etc/csh.cshrc is already set
  ansible.builtin.lineinfile:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - CCE-87721-7
  - DISA-STIG-RHEL-09-412060
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/csh.cshrc
  ansible.builtin.replace:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - CCE-87721-7
  - DISA-STIG-RHEL-09-412060
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/csh.cshrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - CCE-87721-7
  - DISA-STIG-RHEL-09-412060
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Verify the existence of var_accounts_user_umask_as_number variable  oval:ssg-test_existence_of_var_accounts_user_umask_as_number_variable:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_accounts_user_umask_umask_as_number:var:163

Test the retrieved /etc/csh.cshrc umask value(s) match the var_accounts_user_umask requirement  oval:ssg-tst_accounts_umask_etc_csh_cshrc:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-var_etc_csh_cshrc_umask_as_number:var:118
Ensure the Default Umask is Set Correctly in /etc/profilexccdf_org.ssgproject.content_rule_accounts_umask_etc_profile mediumCCE-90828-5

Ensure the Default Umask is Set Correctly in /etc/profile

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_profile
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_umask_etc_profile:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90828-5

References:  BP28(R35), A.6.SEC-RHEL5, 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, 8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, RHEL-09-412070, 5.6.5, SV-258075r926212_rule

Description
To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:
umask 077
Note that /etc/profile also reads scrips within /etc/profile.d directory. These scripts are also valid files to set umask value. Therefore, they should also be considered during the check and properly remediated, if necessary.
Rationale
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_accounts_user_umask='077'


readarray -t profile_files < <(find /etc/profile.d/ -type f -name '*.sh' -or -name 'sh.local')

for file in "${profile_files[@]}" /etc/profile; do
  grep -qE '^[^#]*umask' "$file" && sed -i "s/umask.*/umask $var_accounts_user_umask/g" "$file"
done

if ! grep -qrE '^[^#]*umask' /etc/profile*; then
  echo "umask $var_accounts_user_umask" >> /etc/profile
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 077
  tags:
    - always

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Locate Profile
    Configuration Files Where umask Is Defined
  ansible.builtin.find:
    paths:
    - /etc/profile.d
    patterns:
    - sh.local
    - '*.sh'
    contains: ^[\s]*umask\s+\d+
  register: result_profile_d_files
  tags:
  - CCE-90828-5
  - DISA-STIG-RHEL-09-412070
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Replace Existing
    umask Value in Files From /etc/profile.d
  ansible.builtin.replace:
    path: '{{ item.path }}'
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  loop: '{{ result_profile_d_files.files }}'
  register: result_umask_replaced_profile_d
  when: result_profile_d_files.matched
  tags:
  - CCE-90828-5
  - DISA-STIG-RHEL-09-412070
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Is
    Set in /etc/profile if Not Already Set Elsewhere
  ansible.builtin.lineinfile:
    create: true
    mode: 420
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: not result_profile_d_files.matched
  tags:
  - CCE-90828-5
  - DISA-STIG-RHEL-09-412070
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Value
    For All Existing umask Definition in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  register: result_umask_replaced_profile
  tags:
  - CCE-90828-5
  - DISA-STIG-RHEL-09-412070
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Verify the existence of var_accounts_user_umask_as_number variable  oval:ssg-test_existence_of_var_accounts_user_umask_as_number_variable:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_accounts_user_umask_umask_as_number:var:163

umask value(s) from profile configuration files match the requirement  oval:ssg-tst_accounts_umask_etc_profile:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_accounts_umask_etc_profile:obj:1 of type variable_object
Var ref
oval:ssg-var_etc_profile_umask_as_number:var:1
Ensure the Default Umask is Set Correctly For Interactive Usersxccdf_org.ssgproject.content_rule_accounts_umask_interactive_users mediumCCE-90365-8

Ensure the Default Umask is Set Correctly For Interactive Users

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_interactive_users
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_umask_interactive_users:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90365-8

References:  CCI-000366, CCI-001814, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00228, RHEL-09-411025, SV-258044r926119_rule

Description
Remove the UMASK environment variable from all interactive users initialization files.
Rationale
The umask controls the default access mode assigned to newly created files. A umask of 077 limits new files to mode 700 or less permissive. Although umask can be represented as a four-digit number, the first digit representing special access modes is typically ignored or required to be 0. This requirement applies to the globally configured system defaults and the local interactive user defaults for each account on the system.
OVAL test results details

Umask must not be defined in user initialization files  oval:ssg-test_accounts_umask_interactive_users:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_umask_interactive_users:obj:1 of type textfilecontent54_object
PathFilenamePatternInstanceFilter
^(?:core):(?:[^:]*:){4}([^:]+):[^:]*$
/var/home/core
^\..*^[\s]*umask\s*1oval:ssg-state_accounts_umask_interactive_users_bash_history:ste:1
Ensure the Logon Failure Delay is Set Correctly in login.defsxccdf_org.ssgproject.content_rule_accounts_logon_fail_delay mediumCCE-83635-3

Ensure the Logon Failure Delay is Set Correctly in login.defs

Rule IDxccdf_org.ssgproject.content_rule_accounts_logon_fail_delay
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_logon_fail_delay:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83635-3

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, CCI-000366, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-7(b), CM-6(a), PR.IP-1, SRG-OS-000480-GPOS-00226, RHEL-09-412050, SV-258071r926200_rule

Description
To ensure the logon failure delay controlled by /etc/login.defs is set properly, add or correct the FAIL_DELAY setting in /etc/login.defs to read as follows:
FAIL_DELAY 4
Rationale
Increasing the time between a failed authentication attempt and re-prompting to enter credentials helps to slow a single-threaded brute force attack.

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then

var_accounts_fail_delay='4'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^FAIL_DELAY")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_accounts_fail_delay"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^FAIL_DELAY\\>" "/etc/login.defs"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^FAIL_DELAY\\>.*/$escaped_formatted_output/gi" "/etc/login.defs"
else
    if [[ -s "/etc/login.defs" ]] && [[ -n "$(tail -c 1 -- "/etc/login.defs" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/login.defs"
    fi
    cce="CCE-83635-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/login.defs" >> "/etc/login.defs"
    printf '%s\n' "$formatted_output" >> "/etc/login.defs"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83635-3
  - DISA-STIG-RHEL-09-412050
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - accounts_logon_fail_delay
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
- name: XCCDF Value var_accounts_fail_delay # promote to variable
  set_fact:
    var_accounts_fail_delay: !!str 4
  tags:
    - always

- name: Set accounts logon fail delay
  lineinfile:
    dest: /etc/login.defs
    regexp: ^FAIL_DELAY
    line: FAIL_DELAY {{ var_accounts_fail_delay }}
    create: true
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
  - CCE-83635-3
  - DISA-STIG-RHEL-09-412050
  - NIST-800-53-AC-7(b)
  - NIST-800-53-CM-6(a)
  - accounts_logon_fail_delay
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

check FAIL_DELAY in /etc/login.defs  oval:ssg-test_accounts_logon_fail_delay:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_logon_fail_delay:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/login.defs^[\s]*(?i)FAIL_DELAY(?-i)[\s]+([^#\s]*)1
Set Interactive Session Timeoutxccdf_org.ssgproject.content_rule_accounts_tmout mediumCCE-83633-8

Set Interactive Session Timeout

Rule IDxccdf_org.ssgproject.content_rule_accounts_tmout
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_tmout:def:1
Time2024-01-08T16:20:26+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83633-8

References:  BP28(R29), A.5.SEC-RHEL8, 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.11, CCI-000057, CCI-001133, CCI-002361, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-12, SC-10, AC-2(5), CM-6(a), PR.AC-7, FMT_MOF_EXT.1, 8.6.1, SRG-OS-000163-GPOS-00072, SRG-OS-000029-GPOS-00010, RHEL-09-412035, 5.6.3, SV-258068r926191_rule

Description
Setting the TMOUT option in /etc/profile ensures that all user sessions will terminate based on inactivity. The value of TMOUT should be exported and read only. The TMOUT setting in a file loaded by /etc/profile, e.g. /etc/profile.d/tmout.sh should read as follows:
declare -xr TMOUT=600
Rationale
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_accounts_tmout='600'


# if 0, no occurence of tmout found, if 1, occurence found
tmout_found=0


for f in /etc/profile /etc/profile.d/*.sh; do

    if grep --silent '^[^#].*TMOUT' $f; then
        sed -i -E "s/^(.*)TMOUT\s*=\s*(\w|\$)*(.*)$/declare -xr TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "declare -xr TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
        echo "readonly TMOUT" >> /etc/profile.d/tmout.sh
        echo "export TMOUT" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_accounts_tmout # promote to variable
  set_fact:
    var_accounts_tmout: !!str 600
  tags:
    - always

- name: Correct any occurrence of TMOUT in /etc/profile
  replace:
    path: /etc/profile
    regexp: ^[^#].*TMOUT=.*
    replace: declare -xr TMOUT={{ var_accounts_tmout }}
  register: profile_replaced
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83633-8
  - DISA-STIG-RHEL-09-412035
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set Interactive Session Timeout
  lineinfile:
    path: /etc/profile.d/tmout.sh
    create: true
    regexp: TMOUT=
    line: declare -xr TMOUT={{ var_accounts_tmout }}
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83633-8
  - DISA-STIG-RHEL-09-412035
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSSv4-8.6.1
  - accounts_tmout
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

TMOUT in /etc/profile  oval:ssg-test_etc_profile_tmout:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_profile_tmout:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/profile^[\s]*declare[\s]+-xr[\s]+TMOUT=([\w$]+).*$1

TMOUT in /etc/profile.d/*.sh  oval:ssg-test_etc_profiled_tmout:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_etc_profiled_tmout:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/profile.d^.*\.sh$^[\s]*declare[\s]+-xr[\s]+TMOUT=([\w$]+).*$1

Check that at least one TMOUT is defined  oval:ssg-test_accounts_tmout_defined:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_tmout_defined:obj:1 of type variable_object
Var ref
oval:ssg-variable_count_of_tmout_instances:var:1
User Initialization Files Must Not Run World-Writable Programsxccdf_org.ssgproject.content_rule_accounts_user_dot_no_world_writable_programs mediumCCE-87451-1

User Initialization Files Must Not Run World-Writable Programs

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_dot_no_world_writable_programs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_user_dot_no_world_writable_programs:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87451-1

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411115, 6.2.16, SV-258062r926173_rule

Description
Set the mode on files being executed by the user initialization files with the following command:
$ sudo chmod o-w FILE
Rationale
If user start-up files execute world-writable programs, especially in unprotected directories, they could be maliciously modified to destroy user files or otherwise compromise the system at the user level. If the system is compromised at the user level, it is easier to elevate privileges to eventually compromise the system at the root and network level.
OVAL test results details

Init files do not execute world-writable programs  oval:ssg-test_accounts_user_dot_no_world_writable_programs:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_accounts_user_dot_no_world_writable_programs_init_files:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
^(\.bashrc|\.zshrc|\.cshrc|\.profile|\.bash_login|\.bash_profile)$
/var/home/core
Referenced variable has no values (oval:ssg-var_world_writable_programs_regex:var:1).
1
Ensure that Users Path Contains Only Local Directoriesxccdf_org.ssgproject.content_rule_accounts_user_home_paths_only mediumCCE-87487-5

Ensure that Users Path Contains Only Local Directories

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_home_paths_only
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87487-5

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411055, SV-258050r926137_rule

Description
Ensure that all interactive user initialization files executable search path statements do not contain statements that will reference a working directory other than the users home directory.
Rationale
The executable search path (typically the PATH environment variable) contains a list of directories for the shell to search to find executables. If this path includes the current working directory (other than the users home directory), executables in these directories may be executed instead of system commands. This variable is formatted as a colon-separated list of directories. If there is an empty entry, such as a leading or trailing colon or two consecutive colons, this is interpreted as the current working directory. If deviations from the default system search path for the local interactive user are required, they must be documented with the Information System Security Officer (ISSO).
Evaluation messages
info 
No candidate or applicable check found.
All Interactive Users Must Have A Home Directory Definedxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_defined mediumCCE-88964-2

All Interactive Users Must Have A Home Directory Defined

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_defined
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_user_interactive_home_directory_defined:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88964-2

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411060, SV-258051r926140_rule

Description
Assign home directories to all interactive users that currently do not have a home directory assigned. This rule checks if the home directory is properly defined in a folder which has at least one parent folder, like "user" in "/home/user" or "/remote/users/user". Therefore, this rule will report a finding for home directories like /users, /tmp or /.
Rationale
If local interactive users are not assigned a valid home directory, there is no place for the storage and control of files they should own.
OVAL test results details

All Interactive Users Have A Home Directory Defined  oval:ssg-test_accounts_user_interactive_home_directory_defined:tst:1  true

Following items have been found on the system:
UsernamePasswordUser idGroup idGcosHome dirLogin shellLast login
corex10001000/var/home/core/bin/bash1704730753
All Interactive Users Home Directories Must Existxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists mediumCCE-83639-5

All Interactive Users Home Directories Must Exist

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-accounts_user_interactive_home_directory_exists:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83639-5

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411065, 6.2.10, SV-258052r926143_rule

Description
Create home directories to all local interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in /etc/passwd:
$ sudo mkdir /home/USER
Rationale
If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon. This could create a Denial of Service because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.
OVAL test results details

Check the existence of interactive users.  oval:ssg-test_accounts_user_interactive_home_directory_exists:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_accounts_user_interactive_home_directory_exists_dirs_count_fs:var:11

Check the existence of interactive users.  oval:ssg-test_accounts_user_interactive_home_directory_exists_users:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-var_accounts_user_interactive_home_directory_exists_dirs_count:var:11
All Interactive User Home Directories Must Be Group-Owned By The Primary Groupxccdf_org.ssgproject.content_rule_file_groupownership_home_directories mediumCCE-83629-6

All Interactive User Home Directories Must Be Group-Owned By The Primary Group

Rule IDxccdf_org.ssgproject.content_rule_file_groupownership_home_directories
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupownership_home_directories:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83629-6

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-411070, 6.2.11, SV-258053r926146_rule

Description
Change the group owner of interactive users home directory to the group found in /etc/passwd. To change the group owner of interactive users home directory, use the following command:
$ sudo chgrp USER_GROUP /home/USER
This rule ensures every home directory related to an interactive user is group-owned by an interactive user. It also ensures that interactive users are group-owners of one and only one home directory.
Rationale
If the Group Identifier (GID) of a local interactive users home directory is not the same as the primary GID of the user, this would allow unauthorized access to the users files, and users that share the same group may not be able to access files that they legitimately should.
Warnings
warning  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the group-ownership of their respective home directories.
OVAL test results details

All home directories are group-owned by a local interactive group  oval:ssg-test_file_groupownership_home_directories:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/var/home/core/directory1000100062rwx------ 
Ensure All User Initialization Files Have Mode 0740 Or Less Permissivexccdf_org.ssgproject.content_rule_file_permission_user_init_files mediumCCE-83637-9

Ensure All User Initialization Files Have Mode 0740 Or Less Permissive

Rule IDxccdf_org.ssgproject.content_rule_file_permission_user_init_files
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permission_user_init_files:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83637-9

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-232045, SV-257889r925654_rule

Description
Set the mode of the user initialization files to 0740 with the following command:
$ sudo chmod 0740 /home/USER/.INIT_FILE
Rationale
Local initialization files are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict

var_user_initialization_files_regex='^(\.bashrc|\.zshrc|\.cshrc|\.profile|\.bash_login|\.bash_profile)$'


readarray -t interactive_users < <(awk -F: '$3>=1000   {print $1}' /etc/passwd)
readarray -t interactive_users_home < <(awk -F: '$3>=1000   {print $6}' /etc/passwd)
readarray -t interactive_users_shell < <(awk -F: '$3>=1000   {print $7}' /etc/passwd)

USERS_IGNORED_REGEX='nobody|nfsnobody'

for (( i=0; i<"${#interactive_users[@]}"; i++ )); do
    if ! grep -qP "$USERS_IGNORED_REGEX" <<< "${interactive_users[$i]}" && \
        [ "${interactive_users_shell[$i]}" != "/sbin/nologin" ]; then
        
        readarray -t init_files < <(find "${interactive_users_home[$i]}" -maxdepth 1 \
            -exec basename {} \; | grep -P "$var_user_initialization_files_regex")
        for file in "${init_files[@]}"; do
            chmod u-s,g-wxs,o= "${interactive_users_home[$i]}/$file"
        done
    fi
done

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_user_initialization_files_regex # promote to variable
  set_fact:
    var_user_initialization_files_regex: !!str ^(\.bashrc|\.zshrc|\.cshrc|\.profile|\.bash_login|\.bash_profile)$
  tags:
    - always

- name: Ensure All User Initialization Files Have Mode 0740 Or Less Permissive - Gather
    User Info
  ansible.builtin.getent:
    database: passwd
  tags:
  - CCE-83637-9
  - DISA-STIG-RHEL-09-232045
  - file_permission_user_init_files
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure All User Initialization Files Have Mode 0740 Or Less Permissive - Find
    Init Files
  ansible.builtin.find:
    paths: '{{ item.value[4] }}'
    pattern: '{{ var_user_initialization_files_regex }}'
    hidden: true
    use_regex: true
  with_dict: '{{ ansible_facts.getent_passwd }}'
  when:
  - item.value[4] != "/sbin/nologin"
  - item.key not in ["nobody", "nfsnobody"]
  - item.value[1] | int >= 1000
  register: found_init_files
  tags:
  - CCE-83637-9
  - DISA-STIG-RHEL-09-232045
  - file_permission_user_init_files
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure All User Initialization Files Have Mode 0740 Or Less Permissive - Fix
    Init Files Permissions
  ansible.builtin.file:
    path: '{{ item.1.path }}'
    mode: u-s,g-wxs,o=
  loop: '{{ q(''ansible.builtin.subelements'', found_init_files.results, ''files'',
    {''skip_missing'': True}) }}'
  tags:
  - CCE-83637-9
  - DISA-STIG-RHEL-09-232045
  - file_permission_user_init_files
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

Init files have mode 0740 or less permissive  oval:ssg-test_file_permission_user_init_files:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/var/home/core/.bash_profileregular10001000141rw-r--r-- 
/var/home/core/.bashrcregular10001000492rw-r--r-- 
All Interactive User Home Directories Must Have mode 0750 Or Less Permissivexccdf_org.ssgproject.content_rule_file_permissions_home_directories mediumCCE-83634-6

All Interactive User Home Directories Must Have mode 0750 Or Less Permissive

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_home_directories
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_home_directories:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83634-6

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-232050, 6.2.12, SV-257890r925657_rule

Description
Change the mode of interactive users home directories to 0750. To change the mode of interactive users home directory, use the following command:
$ sudo chmod 0750 /home/USER
Rationale
Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.
OVAL test results details

All home directories have proper permissions  oval:ssg-test_file_permissions_home_directories:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/var/home/core/directory1000100062rwx------ 
Enable authselectxccdf_org.ssgproject.content_rule_enable_authselect mediumCCE-89732-2

Enable authselect

Rule IDxccdf_org.ssgproject.content_rule_enable_authselect
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-enable_authselect:def:1
Time2024-01-08T16:20:25+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89732-2

References:  BP28(R31), A.30.SEC-RHEL1, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), AC-3, FIA_UAU.1, FIA_AFL.1, SRG-OS-000480-GPOS-00227, 5.4.1

Description
Configure user authentication setup to use the authselect tool. If authselect profile is selected, the rule will enable the sssd profile.
Rationale
Authselect is a successor to authconfig. It is a tool to select system authentication and identity sources from a list of supported profiles instead of letting the administrator manually build the PAM stack. That way, it avoids potential breakage of configuration, as it ships several tested profiles that are well tested and supported to solve different use-cases.
Warnings
warning  If the sudo authselect select command returns an error informing that the chosen profile cannot be selected, it is probably because PAM files have already been modified by the administrator. If this is the case, in order to not overwrite the desired changes made by the administrator, the current PAM settings should be investigated before forcing the selection of the chosen authselect profile.


var_authselect_profile='sssd'


authselect select "$var_authselect_profile"

if test "$?" -ne 0; then
    if rpm --quiet --verify pam; then
        authselect select --force "$var_authselect_profile"
    else
	echo "Files in the 'pam' package have been altered, so the authselect configuration won't be forced" >&2
    fi
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: XCCDF Value var_authselect_profile # promote to variable
  set_fact:
    var_authselect_profile: !!str sssd
  tags:
    - always

- name: Enable authselect - Select authselect profile
  ansible.builtin.command:
    cmd: authselect select "{{ var_authselect_profile }}"
  register: result_authselect_select
  failed_when: false
  tags:
  - CCE-89732-2
  - NIST-800-53-AC-3
  - configure_strategy
  - enable_authselect
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable authselect - Verify if PAM has been altered
  ansible.builtin.command:
    cmd: rpm -qV pam
  register: result_altered_authselect
  failed_when: false
  when: result_authselect_select.rc != 0
  tags:
  - CCE-89732-2
  - NIST-800-53-AC-3
  - configure_strategy
  - enable_authselect
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable authselect - Informative message based on the authselect integrity
    check
  ansible.builtin.assert:
    that:
    - result_altered_authselect is skipped or result_altered_authselect.rc == 0
    fail_msg:
    - Files in the 'pam' package have been altered, so the authselect configuration
      won't be forced.
  tags:
  - CCE-89732-2
  - NIST-800-53-AC-3
  - configure_strategy
  - enable_authselect
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable authselect - Force authselect profile select
  ansible.builtin.command:
    cmd: authselect select --force "{{ var_authselect_profile }}"
  when:
  - result_authselect_select.rc != 0
  - result_altered_authselect is skipped or result_altered_authselect.rc == 0
  tags:
  - CCE-89732-2
  - NIST-800-53-AC-3
  - configure_strategy
  - enable_authselect
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

The 'fingerprint-auth' PAM config is a symlink to its authselect counterpart  oval:ssg-test_pam_fingerprint_symlinked_to_authselect:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_fingerprint_symlinked_to_authselect:obj:1 of type symlink_object
Filepath
/etc/pam.d/fingerprint-auth

The 'password-auth' PAM config is a symlink to its authselect counterpart  oval:ssg-test_pam_password_symlinked_to_authselect:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_password_symlinked_to_authselect:obj:1 of type symlink_object
Filepath
/etc/pam.d/password-auth

The 'postlogin' PAM config is a symlink to its authselect counterpart  oval:ssg-test_pam_postlogin_symlinked_to_authselect:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_postlogin_symlinked_to_authselect:obj:1 of type symlink_object
Filepath
/etc/pam.d/postlogin

The 'smartcard-auth' PAM config is a symlink to its authselect counterpart  oval:ssg-test_pam_smartcard_symlinked_to_authselect:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_smartcard_symlinked_to_authselect:obj:1 of type symlink_object
Filepath
/etc/pam.d/smartcard-auth

The 'system-auth' PAM config is a symlink to its authselect counterpart  oval:ssg-test_pam_system_symlinked_to_authselect:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_pam_system_symlinked_to_authselect:obj:1 of type symlink_object
Filepath
/etc/pam.d/system-auth
Record Events that Modify the System's Discretionary Access Controls - chmodxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod mediumCCE-83830-0

Record Events that Modify the System's Discretionary Access Controls - chmod

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_chmod:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83830-0

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, RHEL-09-654015, 4.1.3.9, SV-258177r926518_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="chmod"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83830-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit chmod tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83830-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for chmod for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of chmod in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of chmod in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83830-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for chmod for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of chmod in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of chmod in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83830-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit chmod  oval:ssg-test_32bit_ardm_chmod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_chmod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+chmod[\s]+|([\s]+|[,])chmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit chmod  oval:ssg-test_64bit_ardm_chmod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_chmod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+chmod[\s]+|([\s]+|[,])chmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit chmod  oval:ssg-test_32bit_ardm_chmod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_chmod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+chmod[\s]+|([\s]+|[,])chmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit chmod  oval:ssg-test_64bit_ardm_chmod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_chmod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+chmod[\s]+|([\s]+|[,])chmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - chownxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown mediumCCE-83812-8

Record Events that Modify the System's Discretionary Access Controls - chown

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_chown:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83812-8

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219, RHEL-09-654020, 4.1.3.9, SV-258178r926521_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="chown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83812-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit chown tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83812-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for chown for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of chown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of chown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83812-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for chown for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of chown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - chown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of chown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83812-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_chown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit chown  oval:ssg-test_32bit_ardm_chown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_chown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+chown[\s]+|([\s]+|[,])chown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit chown  oval:ssg-test_64bit_ardm_chown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_chown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+chown[\s]+|([\s]+|[,])chown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit chown  oval:ssg-test_32bit_ardm_chown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_chown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+chown[\s]+|([\s]+|[,])chown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit chown  oval:ssg-test_64bit_ardm_chown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_chown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+chown[\s]+|([\s]+|[,])chown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fchmodxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmod mediumCCE-83832-6

Record Events that Modify the System's Discretionary Access Controls - fchmod

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmod
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fchmod:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83832-6

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, RHEL-09-654015, 4.1.3.9, SV-258177r926518_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchmod"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83832-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fchmod tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83832-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchmod for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmod in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmod in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83832-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchmod for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmod in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmod
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmod in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83832-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmod
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fchmod  oval:ssg-test_32bit_ardm_fchmod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchmod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchmod[\s]+|([\s]+|[,])fchmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fchmod  oval:ssg-test_64bit_ardm_fchmod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchmod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchmod[\s]+|([\s]+|[,])fchmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fchmod  oval:ssg-test_32bit_ardm_fchmod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchmod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchmod[\s]+|([\s]+|[,])fchmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fchmod  oval:ssg-test_64bit_ardm_fchmod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchmod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchmod[\s]+|([\s]+|[,])fchmod([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fchmodatxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmodat mediumCCE-83822-7

Record Events that Modify the System's Discretionary Access Controls - fchmodat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchmodat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fchmodat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83822-7

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, RHEL-09-654015, 4.1.3.9, SV-258177r926518_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchmodat"
	KEY="perm_mod"
	SYSCALL_GROUPING="chmod fchmod fchmodat"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83822-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmodat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fchmodat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83822-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmodat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchmodat for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmodat
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmodat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmodat
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmodat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83822-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmodat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchmodat for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmodat
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmodat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchmodat
      syscall_grouping:
      - chmod
      - fchmod
      - fchmodat

  - name: Check existence of fchmodat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83822-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654015
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchmodat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fchmodat  oval:ssg-test_32bit_ardm_fchmodat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchmodat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchmodat[\s]+|([\s]+|[,])fchmodat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fchmodat  oval:ssg-test_64bit_ardm_fchmodat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchmodat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchmodat[\s]+|([\s]+|[,])fchmodat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fchmodat  oval:ssg-test_32bit_ardm_fchmodat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchmodat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchmodat[\s]+|([\s]+|[,])fchmodat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fchmodat  oval:ssg-test_64bit_ardm_fchmodat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchmodat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchmodat[\s]+|([\s]+|[,])fchmodat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fchownxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchown mediumCCE-83829-2

Record Events that Modify the System's Discretionary Access Controls - fchown

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchown
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fchown:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83829-2

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219, RHEL-09-654020, 4.1.3.9, SV-258178r926521_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83829-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fchown tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83829-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchown for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83829-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchown for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83829-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fchown  oval:ssg-test_32bit_ardm_fchown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchown[\s]+|([\s]+|[,])fchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fchown  oval:ssg-test_64bit_ardm_fchown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchown[\s]+|([\s]+|[,])fchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fchown  oval:ssg-test_32bit_ardm_fchown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchown[\s]+|([\s]+|[,])fchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fchown  oval:ssg-test_64bit_ardm_fchown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchown[\s]+|([\s]+|[,])fchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fchownatxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchownat mediumCCE-83831-8

Record Events that Modify the System's Discretionary Access Controls - fchownat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fchownat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fchownat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83831-8

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219, RHEL-09-654020, 4.1.3.9, SV-258178r926521_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fchownat"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83831-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchownat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fchownat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83831-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchownat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchownat for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchownat
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchownat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchownat
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchownat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83831-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchownat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fchownat for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchownat
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchownat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fchownat
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of fchownat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83831-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fchownat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fchownat  oval:ssg-test_32bit_ardm_fchownat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchownat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchownat[\s]+|([\s]+|[,])fchownat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fchownat  oval:ssg-test_64bit_ardm_fchownat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchownat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchownat[\s]+|([\s]+|[,])fchownat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fchownat  oval:ssg-test_32bit_ardm_fchownat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fchownat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fchownat[\s]+|([\s]+|[,])fchownat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fchownat  oval:ssg-test_64bit_ardm_fchownat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fchownat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fchownat[\s]+|([\s]+|[,])fchownat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fremovexattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fremovexattr mediumCCE-83821-9

Record Events that Modify the System's Discretionary Access Controls - fremovexattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fremovexattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fremovexattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83821-9

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212, SRG-OS-000064-GPOS-00033, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S fremovexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S fremovexattr -F auid=0 -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S fremovexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S fremovexattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83821-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fremovexattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83821-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fremovexattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83821-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fremovexattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83821-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fremovexattr  oval:ssg-test_32bit_ardm_fremovexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fremovexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit fremovexattr auid=0  oval:ssg-test_32bit_ardm_fremovexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fremovexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fremovexattr  oval:ssg-test_64bit_ardm_fremovexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fremovexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit fremovexattr  oval:ssg-test_64bit_ardm_fremovexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fremovexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fremovexattr  oval:ssg-test_32bit_ardm_fremovexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fremovexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit fremovexattr  oval:ssg-test_32bit_ardm_fremovexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fremovexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fremovexattr  oval:ssg-test_64bit_ardm_fremovexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fremovexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit fremovexattr  oval:ssg-test_64bit_ardm_fremovexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fremovexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fremovexattr[\s]+|([\s]+|[,])fremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - fsetxattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fsetxattr mediumCCE-83817-7

Record Events that Modify the System's Discretionary Access Controls - fsetxattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_fsetxattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_fsetxattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83817-7

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000064-GPOS-00033, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S fsetxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S fsetxattr -F auid=0 -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S fsetxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S fsetxattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="fsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83817-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fsetxattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83817-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fsetxattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83817-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fsetxattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83817-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit fsetxattr  oval:ssg-test_32bit_ardm_fsetxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fsetxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit fsetxattr auid=0  oval:ssg-test_32bit_ardm_fsetxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fsetxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit fsetxattr  oval:ssg-test_64bit_ardm_fsetxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fsetxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit fsetxattr  oval:ssg-test_64bit_ardm_fsetxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fsetxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit fsetxattr  oval:ssg-test_32bit_ardm_fsetxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fsetxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit fsetxattr  oval:ssg-test_32bit_ardm_fsetxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_fsetxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit fsetxattr  oval:ssg-test_64bit_ardm_fsetxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fsetxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit fsetxattr  oval:ssg-test_64bit_ardm_fsetxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_fsetxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+fsetxattr[\s]+|([\s]+|[,])fsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - lchownxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lchown mediumCCE-83833-4

Record Events that Modify the System's Discretionary Access Controls - lchown

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lchown
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_lchown:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83833-4

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219, RHEL-09-654020, 4.1.3.9, SV-258178r926521_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lchown"
	KEY="perm_mod"
	SYSCALL_GROUPING="chown fchown fchownat lchown"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83833-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit lchown tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83833-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lchown for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of lchown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of lchown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83833-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lchown for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of lchown in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lchown
      syscall_grouping:
      - chown
      - fchown
      - fchownat
      - lchown

  - name: Check existence of lchown in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83833-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654020
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lchown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit lchown  oval:ssg-test_32bit_ardm_lchown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lchown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lchown[\s]+|([\s]+|[,])lchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit lchown  oval:ssg-test_64bit_ardm_lchown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lchown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lchown[\s]+|([\s]+|[,])lchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit lchown  oval:ssg-test_32bit_ardm_lchown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lchown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lchown[\s]+|([\s]+|[,])lchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit lchown  oval:ssg-test_64bit_ardm_lchown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lchown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lchown[\s]+|([\s]+|[,])lchown([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - lremovexattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lremovexattr mediumCCE-83814-4

Record Events that Modify the System's Discretionary Access Controls - lremovexattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lremovexattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_lremovexattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83814-4

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000466-GPOS-00210, SRG-OS-000064-GPOS-00033, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S lremovexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S lremovexattr -F auid=0 -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S lremovexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S lremovexattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="lremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83814-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit lremovexattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83814-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lremovexattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83814-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lremovexattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83814-4
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit lremovexattr  oval:ssg-test_32bit_ardm_lremovexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lremovexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit lremovexattr auid=0  oval:ssg-test_32bit_ardm_lremovexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lremovexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit lremovexattr  oval:ssg-test_64bit_ardm_lremovexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lremovexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit lremovexattr  oval:ssg-test_64bit_ardm_lremovexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lremovexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit lremovexattr  oval:ssg-test_32bit_ardm_lremovexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lremovexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit lremovexattr  oval:ssg-test_32bit_ardm_lremovexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lremovexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit lremovexattr  oval:ssg-test_64bit_ardm_lremovexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lremovexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit lremovexattr  oval:ssg-test_64bit_ardm_lremovexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lremovexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lremovexattr[\s]+|([\s]+|[,])lremovexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - lsetxattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lsetxattr mediumCCE-83808-6

Record Events that Modify the System's Discretionary Access Controls - lsetxattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_lsetxattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_lsetxattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83808-6

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000064-GPOS-00033, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S lsetxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S lsetxattr -F auid=0 -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S lsetxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S lsetxattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="lsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="lsetxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83808-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit lsetxattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83808-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lsetxattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83808-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for lsetxattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - lsetxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of lsetxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83808-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_lsetxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit lsetxattr  oval:ssg-test_32bit_ardm_lsetxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lsetxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit lsetxattr auid=0  oval:ssg-test_32bit_ardm_lsetxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lsetxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit lsetxattr  oval:ssg-test_64bit_ardm_lsetxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lsetxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit lsetxattr  oval:ssg-test_64bit_ardm_lsetxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lsetxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit lsetxattr  oval:ssg-test_32bit_ardm_lsetxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lsetxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit lsetxattr  oval:ssg-test_32bit_ardm_lsetxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_lsetxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit lsetxattr  oval:ssg-test_64bit_ardm_lsetxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lsetxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit lsetxattr  oval:ssg-test_64bit_ardm_lsetxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_lsetxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+lsetxattr[\s]+|([\s]+|[,])lsetxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - removexattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_removexattr mediumCCE-83807-8

Record Events that Modify the System's Discretionary Access Controls - removexattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_removexattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_removexattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83807-8

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000466-GPOS-00210, SRG-OS-000064-GPOS-00033, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S removexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S removexattr -F auid=0 -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S removexattr -F auid=0 -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S removexattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="removexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="removexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83807-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_removexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit removexattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83807-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_removexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for removexattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83807-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_removexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for removexattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - removexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of removexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83807-8
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_removexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit removexattr  oval:ssg-test_32bit_ardm_removexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_removexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit removexattr auid=0  oval:ssg-test_32bit_ardm_removexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_removexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit removexattr  oval:ssg-test_64bit_ardm_removexattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_removexattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit removexattr  oval:ssg-test_64bit_ardm_removexattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_removexattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit removexattr  oval:ssg-test_32bit_ardm_removexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_removexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit removexattr  oval:ssg-test_32bit_ardm_removexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_removexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit removexattr  oval:ssg-test_64bit_ardm_removexattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_removexattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit removexattr  oval:ssg-test_64bit_ardm_removexattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_removexattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+removexattr[\s]+|([\s]+|[,])removexattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - setxattrxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_setxattr mediumCCE-83811-0

Record Events that Modify the System's Discretionary Access Controls - setxattr

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_setxattr
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_setxattr:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83811-0

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, 10.3.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, RHEL-09-654025, 4.1.3.9, SV-258179r926524_rule

Description
At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S setxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S setxattr -F auid=0 -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S setxattr -F auid=0 -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S setxattr -F auid=0 -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="setxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="setxattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83811-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_setxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit setxattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83811-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_setxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for setxattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83811-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_setxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for setxattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - setxattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of setxattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83811-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654025
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_setxattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit setxattr  oval:ssg-test_32bit_ardm_setxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_setxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit setxattr auid=0  oval:ssg-test_32bit_ardm_setxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_setxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit setxattr  oval:ssg-test_64bit_ardm_setxattr_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_setxattr_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit setxattr  oval:ssg-test_64bit_ardm_setxattr_augenrules_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_setxattr_augenrules_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit setxattr  oval:ssg-test_32bit_ardm_setxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_setxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit setxattr  oval:ssg-test_32bit_ardm_setxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_setxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit setxattr  oval:ssg-test_64bit_ardm_setxattr_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_setxattr_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit setxattr  oval:ssg-test_64bit_ardm_setxattr_auditctl_auid_0:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_setxattr_auditctl_auid_0:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+setxattr[\s]+|([\s]+|[,])setxattr([\s]+|[,])))(?:.*-F\s+auid=0[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - umountxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_umount mediumCCE-89272-9

Record Events that Modify the System's Discretionary Access Controls - umount

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_umount
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_umount:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89272-9

References:  CCI-000130, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000495-CTR-001235, RHEL-09-654205, SV-258215r926632_rule

Description
At a minimum, the audit system should collect file system umount changes. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S umount -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S umount -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit -F arch=b32"
OTHER_FILTERS=""
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="umount"
KEY="perm_mod"
SYSCALL_GROUPING=""

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89272-9
  - DISA-STIG-RHEL-09-654205
  - audit_rules_dac_modification_umount
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for umount for x86 platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount
      syscall_grouping: []

  - name: Check existence of umount in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount
      syscall_grouping: []

  - name: Check existence of umount in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89272-9
  - DISA-STIG-RHEL-09-654205
  - audit_rules_dac_modification_umount
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit umount  oval:ssg-test_32bit_ardm_umount_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_umount_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+umount[\s]+|([\s]+|[,])umount([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit umount  oval:ssg-test_32bit_ardm_umount_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_umount_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+umount[\s]+|([\s]+|[,])umount([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Events that Modify the System's Discretionary Access Controls - umount2xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_umount2 mediumCCE-88570-7

Record Events that Modify the System's Discretionary Access Controls - umount2

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_dac_modification_umount2
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_dac_modification_umount2:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88570-7

References:  BP28(R73), CCI-000130, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000495-CTR-001235, RHEL-09-654210, SV-258216r926635_rule

Description
At a minimum, the audit system should collect file system umount2 changes. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
Rationale
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="umount2"
	KEY="perm_mod"
	SYSCALL_GROUPING=""

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88570-7
  - DISA-STIG-RHEL-09-654210
  - audit_rules_dac_modification_umount2
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit umount2 tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-88570-7
  - DISA-STIG-RHEL-09-654210
  - audit_rules_dac_modification_umount2
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for umount2 for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount2
      syscall_grouping: []

  - name: Check existence of umount2 in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount2
      syscall_grouping: []

  - name: Check existence of umount2 in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88570-7
  - DISA-STIG-RHEL-09-654210
  - audit_rules_dac_modification_umount2
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for umount2 for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount2
      syscall_grouping: []

  - name: Check existence of umount2 in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - umount2
      syscall_grouping: []

  - name: Check existence of umount2 in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-88570-7
  - DISA-STIG-RHEL-09-654210
  - audit_rules_dac_modification_umount2
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit umount2  oval:ssg-test_32bit_ardm_umount2_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_umount2_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+umount2[\s]+|([\s]+|[,])umount2([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit umount2  oval:ssg-test_64bit_ardm_umount2_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_umount2_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+umount2[\s]+|([\s]+|[,])umount2([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit umount2  oval:ssg-test_32bit_ardm_umount2_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_umount2_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+umount2[\s]+|([\s]+|[,])umount2([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit umount2  oval:ssg-test_64bit_ardm_umount2_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_umount2_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+umount2[\s]+|([\s]+|[,])umount2([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run chaclxccdf_org.ssgproject.content_rule_audit_rules_execution_chacl mediumCCE-87685-4

Record Any Attempts to Run chacl

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_chacl
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_chacl:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87685-4

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, RHEL-09-654035, 4.1.3.17, SV-258181r926530_rule

Description
At a minimum, the audit system should collect any execution attempt of the chacl command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/chacl -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-87685-4
  - DISA-STIG-RHEL-09-654035
  - audit_rules_execution_chacl
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/chacl
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/chacl -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chacl -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chacl -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87685-4
  - DISA-STIG-RHEL-09-654035
  - audit_rules_execution_chacl
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules chacl  oval:ssg-test_audit_rules_execution_chacl_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_chacl_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chacl(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl chacl  oval:ssg-test_audit_rules_execution_chacl_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_chacl_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chacl(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run setfaclxccdf_org.ssgproject.content_rule_audit_rules_execution_setfacl mediumCCE-90482-1

Record Any Attempts to Run setfacl

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_setfacl
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_setfacl:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90482-1

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654040, 4.1.3.16, SV-258182r926533_rule

Description
At a minimum, the audit system should collect any execution attempt of the setfacl command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/setfacl -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90482-1
  - DISA-STIG-RHEL-09-654040
  - audit_rules_execution_setfacl
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/setfacl
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/setfacl -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/setfacl -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/setfacl -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90482-1
  - DISA-STIG-RHEL-09-654040
  - audit_rules_execution_setfacl
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules setfacl  oval:ssg-test_audit_rules_execution_setfacl_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setfacl_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/setfacl(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl setfacl  oval:ssg-test_audit_rules_execution_setfacl_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setfacl_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/setfacl(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run chconxccdf_org.ssgproject.content_rule_audit_rules_execution_chcon mediumCCE-83748-4

Record Any Attempts to Run chcon

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_chcon
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_chcon:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83748-4

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, RHEL-09-654045, 4.1.3.15, SV-258183r926536_rule

Description
At a minimum, the audit system should collect any execution attempt of the chcon command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/chcon -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83748-4
  - DISA-STIG-RHEL-09-654045
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_chcon
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/chcon
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/chcon -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chcon -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chcon -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83748-4
  - DISA-STIG-RHEL-09-654045
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_chcon
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules chcon  oval:ssg-test_audit_rules_execution_chcon_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_chcon_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chcon(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl chcon  oval:ssg-test_audit_rules_execution_chcon_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_chcon_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chcon(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run semanagexccdf_org.ssgproject.content_rule_audit_rules_execution_semanage mediumCCE-83750-0

Record Any Attempts to Run semanage

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_semanage
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_semanage:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83750-0

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, RHEL-09-654050, SV-258184r926539_rule

Description
At a minimum, the audit system should collect any execution attempt of the semanage command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/semanage -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83750-0
  - DISA-STIG-RHEL-09-654050
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_semanage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/semanage
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/semanage -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/semanage -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/semanage -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83750-0
  - DISA-STIG-RHEL-09-654050
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_semanage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules semanage  oval:ssg-test_audit_rules_execution_semanage_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_semanage_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/semanage(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl semanage  oval:ssg-test_audit_rules_execution_semanage_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_semanage_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/semanage(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run setfilesxccdf_org.ssgproject.content_rule_audit_rules_execution_setfiles mediumCCE-83736-9

Record Any Attempts to Run setfiles

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_setfiles
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_setfiles:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83736-9

References:  CCI-000169, CCI-000172, CCI-002884, AU-2(d), AU-12(c), AC-6(9), CM-6(a), SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, RHEL-09-654055, SV-258185r926542_rule

Description
At a minimum, the audit system should collect any execution attempt of the setfiles command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/setfiles -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83736-9
  - DISA-STIG-RHEL-09-654055
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_setfiles
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/setfiles
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/setfiles -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/setfiles -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/setfiles -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83736-9
  - DISA-STIG-RHEL-09-654055
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_setfiles
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules setfiles  oval:ssg-test_audit_rules_execution_setfiles_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setfiles_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/setfiles(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl setfiles  oval:ssg-test_audit_rules_execution_setfiles_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setfiles_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/setfiles(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run setseboolxccdf_org.ssgproject.content_rule_audit_rules_execution_setsebool mediumCCE-83751-8

Record Any Attempts to Run setsebool

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_execution_setsebool
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_execution_setsebool:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83751-8

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, RHEL-09-654060, SV-258186r926545_rule

Description
At a minimum, the audit system should collect any execution attempt of the setsebool command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/setsebool -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83751-8
  - DISA-STIG-RHEL-09-654060
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_setsebool
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/setsebool
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/setsebool -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/setsebool -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/setsebool -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83751-8
  - DISA-STIG-RHEL-09-654060
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_execution_setsebool
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules setsebool  oval:ssg-test_audit_rules_execution_setsebool_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setsebool_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/setsebool(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl setsebool  oval:ssg-test_audit_rules_execution_setsebool_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_execution_setsebool_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/setsebool(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects File Deletion Events by User - renamexccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rename mediumCCE-83754-2

Ensure auditd Collects File Deletion Events by User - rename

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rename
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_file_deletion_events_rename:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83754-2

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-000366, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.4, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.1.1, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.MA-2, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-OS-000467-GPOS-00211, SRG-OS-000468-GPOS-00212, RHEL-09-654065, 4.1.3.13, SV-258187r926548_rule

Description
At a minimum, the audit system should collect file deletion events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S rename -F auid>=1000 -F auid!=unset -F key=delete
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S rename -F auid>=1000 -F auid!=unset -F key=delete
Rationale
Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="rename"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83754-2
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rename
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit rename tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83754-2
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rename
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for rename for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rename
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rename in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rename
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rename in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83754-2
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rename
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for rename for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rename
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rename in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rename
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rename in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83754-2
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rename
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit rename  oval:ssg-test_32bit_ardm_rename_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_rename_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+rename[\s]+|([\s]+|[,])rename([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit rename  oval:ssg-test_64bit_ardm_rename_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_rename_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+rename[\s]+|([\s]+|[,])rename([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit rename  oval:ssg-test_32bit_ardm_rename_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_rename_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+rename[\s]+|([\s]+|[,])rename([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit rename  oval:ssg-test_64bit_ardm_rename_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_rename_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+rename[\s]+|([\s]+|[,])rename([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects File Deletion Events by User - renameatxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_renameat mediumCCE-83756-7

Ensure auditd Collects File Deletion Events by User - renameat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_renameat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_file_deletion_events_renameat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83756-7

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-000366, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.4, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.1.1, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.MA-2, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-OS-000467-GPOS-00211, SRG-OS-000468-GPOS-00212, RHEL-09-654065, 4.1.3.13, SV-258187r926548_rule

Description
At a minimum, the audit system should collect file deletion events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S renameat -F auid>=1000 -F auid!=unset -F key=delete
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S renameat -F auid>=1000 -F auid!=unset -F key=delete
Rationale
Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="renameat"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83756-7
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_renameat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit renameat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83756-7
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_renameat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for renameat for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - renameat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of renameat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - renameat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of renameat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83756-7
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_renameat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for renameat for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - renameat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of renameat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - renameat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of renameat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83756-7
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_renameat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit renameat  oval:ssg-test_32bit_ardm_renameat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_renameat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+renameat[\s]+|([\s]+|[,])renameat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit renameat  oval:ssg-test_64bit_ardm_renameat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_renameat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+renameat[\s]+|([\s]+|[,])renameat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit renameat  oval:ssg-test_32bit_ardm_renameat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_renameat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+renameat[\s]+|([\s]+|[,])renameat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit renameat  oval:ssg-test_64bit_ardm_renameat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_renameat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+renameat[\s]+|([\s]+|[,])renameat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects File Deletion Events by User - rmdirxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rmdir mediumCCE-83758-3

Ensure auditd Collects File Deletion Events by User - rmdir

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_rmdir
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_file_deletion_events_rmdir:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83758-3

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-000366, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.4, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.1.1, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.MA-2, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-OS-000467-GPOS-00211, SRG-OS-000468-GPOS-00212, RHEL-09-654065, SV-258187r926548_rule

Description
At a minimum, the audit system should collect file deletion events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S rmdir -F auid>=1000 -F auid!=unset -F key=delete
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S rmdir -F auid>=1000 -F auid!=unset -F key=delete
Rationale
Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="rmdir"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83758-3
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rmdir
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit rmdir tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83758-3
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rmdir
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for rmdir for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rmdir
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rmdir in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rmdir
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rmdir in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83758-3
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rmdir
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for rmdir for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rmdir
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rmdir in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - rmdir
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of rmdir in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83758-3
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_rmdir
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit rmdir  oval:ssg-test_32bit_ardm_rmdir_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_rmdir_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+rmdir[\s]+|([\s]+|[,])rmdir([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit rmdir  oval:ssg-test_64bit_ardm_rmdir_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_rmdir_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+rmdir[\s]+|([\s]+|[,])rmdir([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit rmdir  oval:ssg-test_32bit_ardm_rmdir_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_rmdir_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+rmdir[\s]+|([\s]+|[,])rmdir([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit rmdir  oval:ssg-test_64bit_ardm_rmdir_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_rmdir_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+rmdir[\s]+|([\s]+|[,])rmdir([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects File Deletion Events by User - unlinkatxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlinkat mediumCCE-83755-9

Ensure auditd Collects File Deletion Events by User - unlinkat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_file_deletion_events_unlinkat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_file_deletion_events_unlinkat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83755-9

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-000366, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.4, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.1.1, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.MA-2, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-OS-000467-GPOS-00211, SRG-OS-000468-GPOS-00212, RHEL-09-654065, 4.1.3.13, SV-258187r926548_rule

Description
At a minimum, the audit system should collect file deletion events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S unlinkat -F auid>=1000 -F auid!=unset -F key=delete
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S unlinkat -F auid>=1000 -F auid!=unset -F key=delete
Rationale
Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="unlinkat"
	KEY="delete"
	SYSCALL_GROUPING="unlink unlinkat rename renameat rmdir"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83755-9
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_unlinkat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit unlinkat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83755-9
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_unlinkat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for unlinkat for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - unlinkat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of unlinkat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - unlinkat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of unlinkat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83755-9
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_unlinkat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for unlinkat for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - unlinkat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of unlinkat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/delete.rules
    set_fact: audit_file="/etc/audit/rules.d/delete.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - unlinkat
      syscall_grouping:
      - unlink
      - unlinkat
      - rename
      - renameat
      - rmdir

  - name: Check existence of unlinkat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=delete
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83755-9
  - DISA-STIG-RHEL-09-654065
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_file_deletion_events_unlinkat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit unlinkat  oval:ssg-test_32bit_ardm_unlinkat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_unlinkat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+unlinkat[\s]+|([\s]+|[,])unlinkat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit unlinkat  oval:ssg-test_64bit_ardm_unlinkat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_unlinkat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+unlinkat[\s]+|([\s]+|[,])unlinkat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit unlinkat  oval:ssg-test_32bit_ardm_unlinkat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_unlinkat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+unlinkat[\s]+|([\s]+|[,])unlinkat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit unlinkat  oval:ssg-test_64bit_ardm_unlinkat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_unlinkat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+unlinkat[\s]+|([\s]+|[,])unlinkat([\s]+|[,])))(?:.*-F\s+auid>=1000[\s]+)(?:.*-F\s+auid!=(?:4294967295|unset)[\s]+).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Unsuccessful Access Attempts to Files - creatxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_creat mediumCCE-83786-4

Record Unsuccessful Access Attempts to Files - creat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_creat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_creat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83786-4

References:  BP28(R73), A.3.SEC-RHEL9, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, 4.1.3.7, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="creat"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit creat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for creat EACCES for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for creat EACCES for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for creat EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for creat EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - creat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of creat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83786-4
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_creat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_creat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_creat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_creat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_creat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_creat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_creat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_creat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_creat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_creat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_creat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_creat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_creat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_creat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_creat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_creat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_creat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+creat[\s]+|([\s]+|[,])creat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
/etc/audit/audit.rules1
Record Unsuccessful Access Attempts to Files - ftruncatexccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_ftruncate mediumCCE-83800-3

Record Unsuccessful Access Attempts to Files - ftruncate

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_ftruncate
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_ftruncate:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83800-3

References:  BP28(R73), A.3.SEC-RHEL9, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, 4.1.3.7, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="ftruncate"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit ftruncate tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for ftruncate EACCES for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for ftruncate EACCES for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for ftruncate EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for ftruncate EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - ftruncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of ftruncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83800-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_ftruncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_ftruncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_ftruncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_ftruncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_ftruncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_ftruncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_ftruncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_ftruncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_ftruncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_ftruncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_ftruncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_ftruncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_ftruncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_ftruncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_ftruncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_ftruncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_ftruncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+ftruncate[\s]+|([\s]+|[,])ftruncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1
Record Unsuccessful Access Attempts to Files - openxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_open mediumCCE-83801-1

Record Unsuccessful Access Attempts to Files - open

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_open
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_open:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83801-1

References:  BP28(R73), A.3.SEC-RHEL9, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, 4.1.3.7, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S open -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S open -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S open -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S open -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S open -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S open -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S open -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S open -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="open"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit open tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open EACCES for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open EACCES for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83801-1
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_open_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_open_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_open_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_open_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_open_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_open_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_open_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_open_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_open_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_open_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_open_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_open_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_open_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_open_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_open_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_open_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open[\s]+|([\s]+|[,])open([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1
Record Unsuccessful Access Attempts to Files - open_by_handle_atxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_open_by_handle_at mediumCCE-83796-3

Record Unsuccessful Access Attempts to Files - open_by_handle_at

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_open_by_handle_at
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_open_by_handle_at:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83796-3

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="open_by_handle_at"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit open_by_handle_at tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open_by_handle_at EACCES for 32bit
    platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open_by_handle_at EACCES for 64bit
    platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open_by_handle_at EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for open_by_handle_at EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - open_by_handle_at
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of open_by_handle_at in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83796-3
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_open_by_handle_at
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_open_by_handle_at_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_open_by_handle_at_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_open_by_handle_at_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_open_by_handle_at_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_open_by_handle_at_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_open_by_handle_at_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_open_by_handle_at_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_open_by_handle_at_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_open_by_handle_at_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_open_by_handle_at_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_open_by_handle_at_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_open_by_handle_at_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_open_by_handle_at_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_open_by_handle_at_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_open_by_handle_at_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_open_by_handle_at_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+open_by_handle_at[\s]+|([\s]+|[,])open_by_handle_at([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1
Record Unsuccessful Access Attempts to Files - openatxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_openat mediumCCE-83794-8

Record Unsuccessful Access Attempts to Files - openat

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_openat
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_openat:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83794-8

References:  BP28(R73), A.3.SEC-RHEL9, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, 4.1.3.7, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S openat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S openat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S openat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S openat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S openat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S openat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S openat -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S openat -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="openat"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit openat tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for openat EACCES for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for openat EACCES for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for openat EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for openat EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - openat
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of openat in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83794-8
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_openat
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_openat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_openat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_openat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_openat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_openat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_openat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_openat_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_openat_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_openat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_openat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_openat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_openat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_openat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_openat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_openat_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_openat_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+openat[\s]+|([\s]+|[,])openat([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1
Record Unsuccessful Access Attempts to Files - truncatexccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_truncate mediumCCE-83792-2

Record Unsuccessful Access Attempts to Files - truncate

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification_truncate
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_unsuccessful_file_modification_truncate:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83792-2

References:  BP28(R73), A.3.SEC-RHEL9, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.4, Req-10.2.1, 10.2.1.1, 10.2.1.4, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205, RHEL-09-654070, 4.1.3.7, SV-258188r926551_rule

Description
At a minimum, the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S truncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S truncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S truncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S truncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S truncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S truncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S truncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S truncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Rationale
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL="truncate"
KEY="access"
SYSCALL_GROUPING="creat ftruncate truncate open openat open_by_handle_at"

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EACCES"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS="-F exit=-EPERM"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit truncate tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for truncate EACCES for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for truncate EACCES for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EACCES -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EACCES -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EACCES
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for truncate EPERM for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for truncate EPERM for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/access.rules
    set_fact: audit_file="/etc/audit/rules.d/access.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - truncate
      syscall_grouping:
      - creat
      - ftruncate
      - truncate
      - open
      - openat
      - open_by_handle_at

  - name: Check existence of truncate in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F exit=-EPERM -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F exit=-EPERM -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F exit=-EPERM
        -F auid>=1000 -F auid!=unset -F key=access
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83792-2
  - DISA-STIG-RHEL-09-654070
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.1
  - PCI-DSS-Req-10.2.4
  - PCI-DSSv4-10.2.1.1
  - PCI-DSSv4-10.2.1.4
  - audit_rules_unsuccessful_file_modification_truncate
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_truncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_truncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_truncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_truncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_truncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_truncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit augenrules 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_truncate_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_truncate_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^/etc/audit/rules\.d/.*\.rules$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit file eacces  oval:ssg-test_32bit_arufm_eacces_truncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eacces_truncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 32-bit file eperm  oval:ssg-test_32bit_arufm_eperm_truncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_arufm_eperm_truncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit file eacces  oval:ssg-test_64bit_arufm_eacces_truncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eacces_truncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EACCES)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1

audit auditctl 64-bit file eperm  oval:ssg-test_64bit_arufm_eperm_truncate_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_arufm_eperm_truncate_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*
^[\s]*-a[\s]+always,exit[\s]+(?:-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+truncate[\s]+|([\s]+|[,])truncate([\s]+|[,])))(?:(?!-F[\s]+a\d&).)*(?:-F\s+exit=-EPERM)[\s]+(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295)[\s]+)(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
/etc/audit/audit.rules1
Ensure auditd Collects Information on Kernel Module Unloading - delete_modulexccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_delete mediumCCE-83802-9

Ensure auditd Collects Information on Kernel Module Unloading - delete_module

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_delete
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_kernel_module_loading_delete:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83802-9

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222, RHEL-09-654075, 4.1.3.19, SV-258189r926554_rule

Description
To capture kernel module unloading events, use following line, setting ARCH to either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S delete_module -F auid>=1000 -F auid!=unset -F key=modules
Place to add the line depends on a way auditd daemon is configured. If it is configured to use the augenrules program (the default), add the line to a file with suffix .rules in the directory /etc/audit/rules.d. If the auditd daemon is configured to use the auditctl utility, add the line to file /etc/audit/audit.rules.
Rationale
The removal of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit and 64-bit kernel syscall numbers not always line up =>
#       it's required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule.
#       (See `man 7 audit.rules` for details )
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	
	SYSCALL="delete_module"
	KEY="modules"
	SYSCALL_GROUPING="delete_module"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83802-9
  - DISA-STIG-RHEL-09-654075
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_delete
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set architecture for audit delete_module tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83802-9
  - DISA-STIG-RHEL-09-654075
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_delete
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for delete_module for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - delete_module
      syscall_grouping: []

  - name: Check existence of delete_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - delete_module
      syscall_grouping: []

  - name: Check existence of delete_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83802-9
  - DISA-STIG-RHEL-09-654075
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_delete
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for delete_module for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - delete_module
      syscall_grouping: []

  - name: Check existence of delete_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - delete_module
      syscall_grouping: []

  - name: Check existence of delete_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83802-9
  - DISA-STIG-RHEL-09-654075
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_delete
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20delete_module%20-k%20module-change%0A-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20delete_module%20-k%20module-change%0A
        mode: 0600
        path: /etc/audit/rules.d/75-kernel-module-loading-delete.rules
        overwrite: true
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit delete_module  oval:ssg-test_32bit_ardm_delete_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_delete_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+delete_module[\s]+|([\s]+|[,])delete_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit delete_module  oval:ssg-test_64bit_ardm_delete_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_delete_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+delete_module[\s]+|([\s]+|[,])delete_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit delete_module  oval:ssg-test_32bit_ardm_delete_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_delete_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+delete_module[\s]+|([\s]+|[,])delete_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit delete_module  oval:ssg-test_64bit_ardm_delete_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_delete_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+delete_module[\s]+|([\s]+|[,])delete_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on Kernel Module Loading and Unloading - finit_modulexccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_finit mediumCCE-83803-7

Ensure auditd Collects Information on Kernel Module Loading and Unloading - finit_module

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_finit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_kernel_module_loading_finit:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83803-7

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222, RHEL-09-654080, 4.1.3.19, SV-258190r926557_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d to capture kernel module loading and unloading events, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S finit_module -F auid>=1000 -F auid!=unset -F key=modules
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file in order to capture kernel module loading and unloading events, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S finit_module -F auid>=1000 -F auid!=unset -F key=modules
Rationale
The addition/removal of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit and 64-bit kernel syscall numbers not always line up =>
#       it's required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule.
#       (See `man 7 audit.rules` for details )
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	
	SYSCALL="finit_module"
	KEY="modules"
	SYSCALL_GROUPING="init_module finit_module"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83803-7
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_finit
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set architecture for audit finit_module tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-83803-7
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_finit
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for finit_module for x86 platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - finit_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of finit_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - finit_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of finit_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83803-7
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_finit
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for finit_module for x86_64 platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - finit_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of finit_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - finit_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of finit_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-83803-7
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_finit
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20finit_module%20-k%20module-change%0A-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20finit_module%20-k%20module-change%0A
        mode: 0600
        path: /etc/audit/rules.d/75-kernel-module-loading-finit.rules
        overwrite: true
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit finit_module  oval:ssg-test_32bit_ardm_finit_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_finit_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+finit_module[\s]+|([\s]+|[,])finit_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit finit_module  oval:ssg-test_64bit_ardm_finit_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_finit_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+finit_module[\s]+|([\s]+|[,])finit_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit finit_module  oval:ssg-test_32bit_ardm_finit_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_finit_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+finit_module[\s]+|([\s]+|[,])finit_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit finit_module  oval:ssg-test_64bit_ardm_finit_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_finit_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+finit_module[\s]+|([\s]+|[,])finit_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on Kernel Module Loading - init_modulexccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_init mediumCCE-90835-0

Ensure auditd Collects Information on Kernel Module Loading - init_module

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading_init
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_kernel_module_loading_init:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90835-0

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.7, 10.2.1.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222, RHEL-09-654080, 4.1.3.19, SV-258190r926557_rule

Description
To capture kernel module loading events, use following line, setting ARCH to either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S init_module -F auid>=1000 -F auid!=unset -F key=modules
Place to add the line depends on a way auditd daemon is configured. If it is configured to use the augenrules program (the default), add the line to a file with suffix .rules in the directory /etc/audit/rules.d. If the auditd daemon is configured to use the auditctl utility, add the line to file /etc/audit/audit.rules.
Rationale
The addition of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit and 64-bit kernel syscall numbers not always line up =>
#       it's required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule.
#       (See `man 7 audit.rules` for details )
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	
	SYSCALL="init_module"
	KEY="modules"
	SYSCALL_GROUPING="init_module finit_module"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90835-0
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_init
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set architecture for audit init_module tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-90835-0
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_init
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for init_module for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - init_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of init_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - init_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of init_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90835-0
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_init
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Perform remediation of Audit rules for init_module for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - init_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of init_module in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/module-change.rules
    set_fact: audit_file="/etc/audit/rules.d/module-change.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - init_module
      syscall_grouping:
      - init_module
      - finit_module

  - name: Check existence of init_module in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=module-change
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-90835-0
  - DISA-STIG-RHEL-09-654080
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.7
  - PCI-DSSv4-10.2.1.7
  - audit_rules_kernel_module_loading_init
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20init_module%20-k%20module-change%0A-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20init_module%20-k%20module-change%0A
        mode: 0600
        path: /etc/audit/rules.d/75-kernel-module-loading-init.rules
        overwrite: true
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit init_module  oval:ssg-test_32bit_ardm_init_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_init_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+init_module[\s]+|([\s]+|[,])init_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit augenrules 64-bit init_module  oval:ssg-test_64bit_ardm_init_module_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_init_module_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+init_module[\s]+|([\s]+|[,])init_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit init_module  oval:ssg-test_32bit_ardm_init_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_ardm_init_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+init_module[\s]+|([\s]+|[,])init_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

audit auditctl 64-bit init_module  oval:ssg-test_64bit_ardm_init_module_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_ardm_init_module_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+init_module[\s]+|([\s]+|[,])init_module([\s]+|[,]))).*(?:-F\s+auid>=1000[\s]+)(?:-F\s+auid!=(unset|4294967295))\s+(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - initxccdf_org.ssgproject.content_rule_audit_privileged_commands_init mediumCCE-85956-1

Ensure auditd Collects Information on the Use of Privileged Commands - init

Rule IDxccdf_org.ssgproject.content_rule_audit_privileged_commands_init
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_privileged_commands_init:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85956-1

References:  CCI-000172, AU-12(c), SRG-OS-000477-GPOS-00222, RHEL-09-654185, SV-258211r926620_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/init -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/init -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of the init command may cause availability issues for the system.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/init -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85956-1
  - DISA-STIG-RHEL-09-654185
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_init
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/init
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/init -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/init -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/init -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/init -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/init -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/init -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85956-1
  - DISA-STIG-RHEL-09-654185
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_init
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules init  oval:ssg-test_audit_privileged_commands_init_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_init_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/init(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl init  oval:ssg-test_audit_privileged_commands_init_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_init_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/init(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - poweroffxccdf_org.ssgproject.content_rule_audit_privileged_commands_poweroff mediumCCE-85957-9

Ensure auditd Collects Information on the Use of Privileged Commands - poweroff

Rule IDxccdf_org.ssgproject.content_rule_audit_privileged_commands_poweroff
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_privileged_commands_poweroff:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85957-9

References:  CCI-000172, AU-12(c), SRG-OS-000477-GPOS-00222, RHEL-09-654190, SV-258212r926623_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/poweroff -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/poweroff -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of the poweroff command may cause availability issues for the system.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/poweroff -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85957-9
  - DISA-STIG-RHEL-09-654190
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_poweroff
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/poweroff
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/poweroff -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/poweroff -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/poweroff -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/poweroff -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/poweroff -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/poweroff -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85957-9
  - DISA-STIG-RHEL-09-654190
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_poweroff
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules poweroff  oval:ssg-test_audit_privileged_commands_poweroff_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_poweroff_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/poweroff(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl poweroff  oval:ssg-test_audit_privileged_commands_poweroff_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_poweroff_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/poweroff(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - rebootxccdf_org.ssgproject.content_rule_audit_privileged_commands_reboot mediumCCE-85958-7

Ensure auditd Collects Information on the Use of Privileged Commands - reboot

Rule IDxccdf_org.ssgproject.content_rule_audit_privileged_commands_reboot
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_privileged_commands_reboot:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85958-7

References:  CCI-000172, AU-12(c), SRG-OS-000477-GPOS-00222, RHEL-09-654195, SV-258213r926626_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/reboot -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/reboot -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of the reboot command may cause availability issues for the system.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/reboot -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85958-7
  - DISA-STIG-RHEL-09-654195
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_reboot
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/reboot
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/reboot -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/reboot -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/reboot -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/reboot -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/reboot -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/reboot -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85958-7
  - DISA-STIG-RHEL-09-654195
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_reboot
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules reboot  oval:ssg-test_audit_privileged_commands_reboot_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_reboot_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/reboot(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl reboot  oval:ssg-test_audit_privileged_commands_reboot_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_reboot_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/reboot(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - shutdownxccdf_org.ssgproject.content_rule_audit_privileged_commands_shutdown mediumCCE-85959-5

Ensure auditd Collects Information on the Use of Privileged Commands - shutdown

Rule IDxccdf_org.ssgproject.content_rule_audit_privileged_commands_shutdown
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_privileged_commands_shutdown:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85959-5

References:  CCI-000172, AU-12(c), SRG-OS-000477-GPOS-00222, RHEL-09-654200, SV-258214r926629_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/shutdown -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/shutdown -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of the shutdown command may cause availability issues for the system.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/shutdown -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-85959-5
  - DISA-STIG-RHEL-09-654200
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/shutdown
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/shutdown -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/shutdown -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/shutdown -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/shutdown -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/shutdown -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/shutdown -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-85959-5
  - DISA-STIG-RHEL-09-654200
  - NIST-800-53-AU-12(c)
  - audit_privileged_commands_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules shutdown  oval:ssg-test_audit_privileged_commands_shutdown_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_shutdown_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/shutdown(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl shutdown  oval:ssg-test_audit_privileged_commands_shutdown_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_privileged_commands_shutdown_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/shutdown(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - chagexccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_chage mediumCCE-83765-8

Ensure auditd Collects Information on the Use of Privileged Commands - chage

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_chage
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_chage:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83765-8

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654085, SV-258191r926560_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/chage -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83765-8
  - DISA-STIG-RHEL-09-654085
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_chage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/chage
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/chage -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chage -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chage -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83765-8
  - DISA-STIG-RHEL-09-654085
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_chage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules chage  oval:ssg-test_audit_rules_privileged_commands_chage_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_chage_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chage(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl chage  oval:ssg-test_audit_rules_privileged_commands_chage_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_chage_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chage(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - chshxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_chsh mediumCCE-83763-3

Ensure auditd Collects Information on the Use of Privileged Commands - chsh

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_chsh
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_chsh:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83763-3

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654090, SV-258192r926563_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/chsh -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83763-3
  - DISA-STIG-RHEL-09-654090
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_chsh
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/chsh
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/chsh -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chsh -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/chsh -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83763-3
  - DISA-STIG-RHEL-09-654090
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_chsh
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules chsh  oval:ssg-test_audit_rules_privileged_commands_chsh_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_chsh_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chsh(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl chsh  oval:ssg-test_audit_rules_privileged_commands_chsh_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_chsh_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/chsh(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - crontabxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_crontab mediumCCE-83761-7

Ensure auditd Collects Information on the Use of Privileged Commands - crontab

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_crontab
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_crontab:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83761-7

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654095, SV-258193r926566_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/crontab -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83761-7
  - DISA-STIG-RHEL-09-654095
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/crontab
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/crontab -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/crontab -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/crontab -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83761-7
  - DISA-STIG-RHEL-09-654095
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules crontab  oval:ssg-test_audit_rules_privileged_commands_crontab_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_crontab_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/crontab(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl crontab  oval:ssg-test_audit_rules_privileged_commands_crontab_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_crontab_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/crontab(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - gpasswdxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_gpasswd mediumCCE-83773-2

Ensure auditd Collects Information on the Use of Privileged Commands - gpasswd

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_gpasswd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_gpasswd:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83773-2

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654100, SV-258194r926569_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/gpasswd -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83773-2
  - DISA-STIG-RHEL-09-654100
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_gpasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/gpasswd
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/gpasswd -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/gpasswd -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/gpasswd -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83773-2
  - DISA-STIG-RHEL-09-654100
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_gpasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules gpasswd  oval:ssg-test_audit_rules_privileged_commands_gpasswd_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_gpasswd_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/gpasswd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl gpasswd  oval:ssg-test_audit_rules_privileged_commands_gpasswd_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_gpasswd_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/gpasswd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - kmodxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_kmod mediumCCE-90262-7

Ensure auditd Collects Information on the Use of Privileged Commands - kmod

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_kmod
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_kmod:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90262-7

References:  BP28(R73), CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, AU-3, AU-3.1, AU-12(a), AU-12.1(ii), AU-12.1(iv)AU-12(c), MA-4(1)(a), SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222, RHEL-09-654105, 4.1.3.19, SV-258195r926572_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/kmod -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90262-7
  - DISA-STIG-RHEL-09-654105
  - NIST-800-53-AU-12(a)
  - NIST-800-53-AU-12.1(ii)
  - NIST-800-53-AU-12.1(iv)AU-12(c)
  - NIST-800-53-AU-3
  - NIST-800-53-AU-3.1
  - NIST-800-53-MA-4(1)(a)
  - audit_rules_privileged_commands_kmod
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/kmod
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/kmod -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/kmod -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/kmod -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90262-7
  - DISA-STIG-RHEL-09-654105
  - NIST-800-53-AU-12(a)
  - NIST-800-53-AU-12.1(ii)
  - NIST-800-53-AU-12.1(iv)AU-12(c)
  - NIST-800-53-AU-3
  - NIST-800-53-AU-3.1
  - NIST-800-53-MA-4(1)(a)
  - audit_rules_privileged_commands_kmod
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules kmod  oval:ssg-test_audit_rules_privileged_commands_kmod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_kmod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/kmod(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl kmod  oval:ssg-test_audit_rules_privileged_commands_kmod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_kmod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/kmod(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - mountxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_mount mediumCCE-89564-9

Ensure auditd Collects Information on the Use of Privileged Commands - mount

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_mount
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_mount:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89564-9

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, AU-2(d), AU-12(c), AC-6(9), CM-6(a), FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654180, SV-258210r926617_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/mount -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89564-9
  - DISA-STIG-RHEL-09-654180
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_mount
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/mount
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/mount -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/mount -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/mount -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89564-9
  - DISA-STIG-RHEL-09-654180
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_mount
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules mount  oval:ssg-test_audit_rules_privileged_commands_mount_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_mount_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/mount(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl mount  oval:ssg-test_audit_rules_privileged_commands_mount_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_mount_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/mount(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - newgrpxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_newgrp mediumCCE-83766-6

Ensure auditd Collects Information on the Use of Privileged Commands - newgrp

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_newgrp
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_newgrp:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83766-6

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000169, CCI-000135, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654110, SV-258196r926575_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/newgrp -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83766-6
  - DISA-STIG-RHEL-09-654110
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_newgrp
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/newgrp
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/newgrp -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/newgrp -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/newgrp -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83766-6
  - DISA-STIG-RHEL-09-654110
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_newgrp
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules newgrp  oval:ssg-test_audit_rules_privileged_commands_newgrp_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_newgrp_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/newgrp(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl newgrp  oval:ssg-test_audit_rules_privileged_commands_newgrp_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_newgrp_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/newgrp(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - pam_timestamp_checkxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_pam_timestamp_check mediumCCE-83767-4

Ensure auditd Collects Information on the Use of Privileged Commands - pam_timestamp_check

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_pam_timestamp_check
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_pam_timestamp_check:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83767-4

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654115, SV-258197r926578_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/pam_timestamp_check
-F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/pam_timestamp_check
-F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/pam_timestamp_check -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83767-4
  - DISA-STIG-RHEL-09-654115
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_pam_timestamp_check
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/pam_timestamp_check
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000 -F auid!=unset
        (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/pam_timestamp_check
        -F perm=x -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/pam_timestamp_check
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000 -F auid!=unset
        (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000
        -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/pam_timestamp_check
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83767-4
  - DISA-STIG-RHEL-09-654115
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_pam_timestamp_check
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules pam_timestamp_check  oval:ssg-test_audit_rules_privileged_commands_pam_timestamp_check_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_pam_timestamp_check_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/pam_timestamp_check(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl pam_timestamp_check  oval:ssg-test_audit_rules_privileged_commands_pam_timestamp_check_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_pam_timestamp_check_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/pam_timestamp_check(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - passwdxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_passwd mediumCCE-83781-5

Ensure auditd Collects Information on the Use of Privileged Commands - passwd

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_passwd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_passwd:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83781-5

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654120, SV-258198r926581_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/passwd -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83781-5
  - DISA-STIG-RHEL-09-654120
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/passwd
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/passwd -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/passwd -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/passwd -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83781-5
  - DISA-STIG-RHEL-09-654120
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules passwd  oval:ssg-test_audit_rules_privileged_commands_passwd_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_passwd_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/passwd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl passwd  oval:ssg-test_audit_rules_privileged_commands_passwd_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_passwd_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/passwd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - postdropxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_postdrop mediumCCE-83769-0

Ensure auditd Collects Information on the Use of Privileged Commands - postdrop

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_postdrop
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_postdrop:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83769-0

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654125, SV-258199r926584_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/postdrop -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83769-0
  - DISA-STIG-RHEL-09-654125
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_postdrop
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/postdrop
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/postdrop -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/postdrop -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/postdrop -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83769-0
  - DISA-STIG-RHEL-09-654125
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_postdrop
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules postdrop  oval:ssg-test_audit_rules_privileged_commands_postdrop_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_postdrop_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/postdrop(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl postdrop  oval:ssg-test_audit_rules_privileged_commands_postdrop_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_postdrop_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/postdrop(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - postqueuexccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_postqueue mediumCCE-83770-8

Ensure auditd Collects Information on the Use of Privileged Commands - postqueue

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_postqueue
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_postqueue:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83770-8

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654130, SV-258200r926587_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/postqueue -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83770-8
  - DISA-STIG-RHEL-09-654130
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_postqueue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/postqueue
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/postqueue -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/postqueue -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/postqueue -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83770-8
  - DISA-STIG-RHEL-09-654130
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_postqueue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules postqueue  oval:ssg-test_audit_rules_privileged_commands_postqueue_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_postqueue_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/postqueue(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl postqueue  oval:ssg-test_audit_rules_privileged_commands_postqueue_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_postqueue_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/postqueue(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Record Any Attempts to Run ssh-agentxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_ssh_agent mediumCCE-90388-0

Record Any Attempts to Run ssh-agent

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_ssh_agent
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_ssh_agent:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90388-0

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654135, SV-258201r926590_rule

Description
At a minimum, the audit system should collect any execution attempt of the ssh-agent command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset -k privileged-ssh-agent
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset -k privileged-ssh-agent
Rationale
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the information system (e.g., module or policy filter).

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/ssh-agent -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90388-0
  - DISA-STIG-RHEL-09-654135
  - audit_rules_privileged_commands_ssh_agent
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/ssh-agent
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/ssh-agent -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/ssh-agent -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/ssh-agent -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90388-0
  - DISA-STIG-RHEL-09-654135
  - audit_rules_privileged_commands_ssh_agent
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules ssh_agent  oval:ssg-test_audit_rules_privileged_commands_ssh_agent_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_ssh_agent_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/ssh-agent(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl ssh_agent  oval:ssg-test_audit_rules_privileged_commands_ssh_agent_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_ssh_agent_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/ssh-agent(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - ssh-keysignxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_ssh_keysign mediumCCE-83776-5

Ensure auditd Collects Information on the Use of Privileged Commands - ssh-keysign

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_ssh_keysign
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_ssh_keysign:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83776-5

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654140, SV-258202r926593_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/libexec/openssh/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/libexec/openssh/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/libexec/openssh/ssh-keysign -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83776-5
  - DISA-STIG-RHEL-09-654140
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_ssh_keysign
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/libexec/openssh/ssh-keysign
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/libexec/openssh/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset
        (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/libexec/openssh/ssh-keysign
        -F perm=x -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/libexec/openssh/ssh-keysign
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/libexec/openssh/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset
        (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/libexec/openssh/ssh-keysign -F perm=x -F auid>=1000
        -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/libexec/openssh/ssh-keysign
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83776-5
  - DISA-STIG-RHEL-09-654140
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_ssh_keysign
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules ssh_keysign  oval:ssg-test_audit_rules_privileged_commands_ssh_keysign_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_ssh_keysign_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/libexec\/openssh\/ssh-keysign(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl ssh_keysign  oval:ssg-test_audit_rules_privileged_commands_ssh_keysign_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_ssh_keysign_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/libexec\/openssh\/ssh-keysign(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - suxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_su mediumCCE-83771-6

Ensure auditd Collects Information on the Use of Privileged Commands - su

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_su
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_su:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83771-6

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-0003, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-APP-000029-CTR-000085, RHEL-09-654145, SV-258203r926596_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/su -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83771-6
  - DISA-STIG-RHEL-09-654145
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_su
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/su
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/su -F perm=x -F auid>=1000
        -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/su -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/su -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83771-6
  - DISA-STIG-RHEL-09-654145
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_su
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules su  oval:ssg-test_audit_rules_privileged_commands_su_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_su_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/su(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl su  oval:ssg-test_audit_rules_privileged_commands_su_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_su_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/su(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - sudoxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudo mediumCCE-83780-7

Ensure auditd Collects Information on the Use of Privileged Commands - sudo

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudo
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_sudo:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83780-7

References:  BP28(R19), 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-APP-000029-CTR-000085, RHEL-09-654150, SV-258204r926599_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/sudo -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83780-7
  - DISA-STIG-RHEL-09-654150
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_sudo
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/sudo
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/sudo -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/sudo -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/sudo -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83780-7
  - DISA-STIG-RHEL-09-654150
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_sudo
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules sudo  oval:ssg-test_audit_rules_privileged_commands_sudo_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_sudo_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/sudo(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl sudo  oval:ssg-test_audit_rules_privileged_commands_sudo_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_sudo_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/sudo(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - sudoeditxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudoedit mediumCCE-83764-1

Ensure auditd Collects Information on the Use of Privileged Commands - sudoedit

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_sudoedit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_sudoedit:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83764-1

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000495-CTR-001235, RHEL-09-654155, SV-258205r926602_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/sudoedit -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83764-1
  - DISA-STIG-RHEL-09-654155
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_sudoedit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/sudoedit
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/sudoedit -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/sudoedit -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/sudoedit -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83764-1
  - DISA-STIG-RHEL-09-654155
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_sudoedit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules sudoedit  oval:ssg-test_audit_rules_privileged_commands_sudoedit_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_sudoedit_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/sudoedit(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl sudoedit  oval:ssg-test_audit_rules_privileged_commands_sudoedit_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_sudoedit_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/sudoedit(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - umountxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_umount mediumCCE-83762-5

Ensure auditd Collects Information on the Use of Privileged Commands - umount

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_umount
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_umount:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83762-5

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000169, CCI-000135, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654030, SV-258180r926527_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/bin/umount -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83762-5
  - DISA-STIG-RHEL-09-654030
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_umount
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/bin/umount
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/bin/umount -F perm=x -F
        auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/umount -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/bin/umount -F perm=x
        -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83762-5
  - DISA-STIG-RHEL-09-654030
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_umount
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules umount  oval:ssg-test_audit_rules_privileged_commands_umount_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_umount_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/umount(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl umount  oval:ssg-test_audit_rules_privileged_commands_umount_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_umount_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/bin\/umount(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - unix_chkpwdxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_unix_chkpwd mediumCCE-83768-2

Ensure auditd Collects Information on the Use of Privileged Commands - unix_chkpwd

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_unix_chkpwd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_unix_chkpwd:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83768-2

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R6.5, AC-2(4), AU-2(d), AU-3, AU-3.1, AU-12(a), AU-12(c), AU-12.1(ii), AU-12.1(iv), AC-6(9), CM-6(a), MA-4(1)(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-APP-000029-CTR-000085, RHEL-09-654160, SV-258206r926605_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/unix_chkpwd -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83768-2
  - DISA-STIG-RHEL-09-654160
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(a)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-12.1(ii)
  - NIST-800-53-AU-12.1(iv)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-AU-3
  - NIST-800-53-AU-3.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(1)(a)
  - audit_rules_privileged_commands_unix_chkpwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/unix_chkpwd
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/unix_chkpwd -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/unix_chkpwd
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/unix_chkpwd
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83768-2
  - DISA-STIG-RHEL-09-654160
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(a)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-12.1(ii)
  - NIST-800-53-AU-12.1(iv)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-AU-3
  - NIST-800-53-AU-3.1
  - NIST-800-53-CM-6(a)
  - NIST-800-53-MA-4(1)(a)
  - audit_rules_privileged_commands_unix_chkpwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules unix_chkpwd  oval:ssg-test_audit_rules_privileged_commands_unix_chkpwd_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_unix_chkpwd_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/unix_chkpwd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl unix_chkpwd  oval:ssg-test_audit_rules_privileged_commands_unix_chkpwd_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_unix_chkpwd_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/unix_chkpwd(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - unix_updatexccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_unix_update mediumCCE-89481-6

Ensure auditd Collects Information on the Use of Privileged Commands - unix_update

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_unix_update
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_unix_update:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89481-6

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654165, SV-258207r926608_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/unix_update -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89481-6
  - DISA-STIG-RHEL-09-654165
  - audit_rules_privileged_commands_unix_update
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/unix_update
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/unix_update -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/unix_update
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/unix_update
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89481-6
  - DISA-STIG-RHEL-09-654165
  - audit_rules_privileged_commands_unix_update
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules unix_update  oval:ssg-test_audit_rules_privileged_commands_unix_update_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_unix_update_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/unix_update(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl unix_update  oval:ssg-test_audit_rules_privileged_commands_unix_update_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_unix_update_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/unix_update(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - userhelperxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_userhelper mediumCCE-83760-9

Ensure auditd Collects Information on the Use of Privileged Commands - userhelper

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_userhelper
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_userhelper:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83760-9

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-654170, SV-258208r926611_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/userhelper -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83760-9
  - DISA-STIG-RHEL-09-654170
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_userhelper
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/userhelper
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/userhelper -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/userhelper
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/userhelper
        -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83760-9
  - DISA-STIG-RHEL-09-654170
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - audit_rules_privileged_commands_userhelper
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules userhelper  oval:ssg-test_audit_rules_privileged_commands_userhelper_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_userhelper_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/userhelper(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl userhelper  oval:ssg-test_audit_rules_privileged_commands_userhelper_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_userhelper_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/userhelper(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Ensure auditd Collects Information on the Use of Privileged Commands - usermodxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_usermod mediumCCE-87212-7

Ensure auditd Collects Information on the Use of Privileged Commands - usermod

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_privileged_commands_usermod
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_privileged_commands_usermod:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87212-7

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, RHEL-09-654175, 4.1.3.18, SV-258209r926614_rule

Description
At a minimum, the audit system should collect the execution of privileged commands for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules:
-a always,exit -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

ACTION_ARCH_FILTERS="-a always,exit"
OTHER_FILTERS="-F path=/usr/sbin/usermod -F perm=x"
AUID_FILTERS="-F auid>=1000 -F auid!=unset"
SYSCALL=""
KEY="privileged"
SYSCALL_GROUPING=""
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-87212-7
  - DISA-STIG-RHEL-09-654175
  - audit_rules_privileged_commands_usermod
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for /usr/sbin/usermod
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/privileged.rules
    set_fact: audit_file="/etc/audit/rules.d/privileged.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F path=/usr/sbin/usermod -F perm=x
        -F auid>=1000 -F auid!=unset (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/usermod -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls: []
      syscall_grouping: []

  - name: Check existence of  in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit(( -S |,)\w+)*(( -S |,){{ item }})+(( -S |,)\w+)* -F
        path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit)(?=.*(?:(?:-S |,)(?:{{ syscalls_found | join("|") }}))\b)((?:(
        -S |,)\w+)+)( -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset
        (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit{{ syscalls | join(',') }} -F path=/usr/sbin/usermod -F
        perm=x -F auid>=1000 -F auid!=unset -F key=privileged
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87212-7
  - DISA-STIG-RHEL-09-654175
  - audit_rules_privileged_commands_usermod
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules usermod  oval:ssg-test_audit_rules_privileged_commands_usermod_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_usermod_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/usermod(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl usermod  oval:ssg-test_audit_rules_privileged_commands_usermod_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_privileged_commands_usermod_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+path=\/usr\/sbin\/usermod(?:[\s]+-F[\s]+perm=x)[\s]+-F[\s]+auid>=1000[\s]+-F[\s]+auid!=(?:4294967295|unset|-1)[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Make the auditd Configuration Immutablexccdf_org.ssgproject.content_rule_audit_rules_immutable mediumCCE-83716-1

Make the auditd Configuration Immutable

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_immutable
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_immutable:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83716-1

References:  BP28(R73), 1, 11, 12, 13, 14, 15, 16, 18, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO01.06, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, BAI03.05, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, DSS06.02, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.3.1, 3.4.3, CCI-000162, CCI-000163, CCI-000164, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.310(a)(2)(iv), 164.312(d), 164.310(d)(2)(iii), 164.312(b), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 6.1, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, ID.SC-4, PR.AC-4, PR.DS-5, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.5.2, 10.3.2, SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, RHEL-09-654275, 4.1.3.20, SV-258229r926674_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d in order to make the auditd configuration immutable:
-e 2
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file in order to make the auditd configuration immutable:
-e 2
With this setting, a reboot will be required to change any audit rules.
Rationale
Making the audit configuration immutable prevents accidental as well as malicious modification of the audit rules, although it may be problematic if legitimate changes are needed during system operation.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Traverse all of:
#
# /etc/audit/audit.rules,			(for auditctl case)
# /etc/audit/rules.d/*.rules			(for augenrules case)
#
# files to check if '-e .*' setting is present in that '*.rules' file already.
# If found, delete such occurrence since auditctl(8) manual page instructs the
# '-e 2' rule should be placed as the last rule in the configuration
find /etc/audit /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -exec sed -i '/-e[[:space:]]\+.*/d' {} ';'

# Append '-e 2' requirement at the end of both:
# * /etc/audit/audit.rules file 		(for auditctl case)
# * /etc/audit/rules.d/immutable.rules		(for augenrules case)

for AUDIT_FILE in "/etc/audit/audit.rules" "/etc/audit/rules.d/immutable.rules"
do
	echo '' >> $AUDIT_FILE
	echo '# Set the audit.rules configuration immutable per security requirements' >> $AUDIT_FILE
	echo '# Reboot is required to change audit rules once this setting is applied' >> $AUDIT_FILE
	echo '-e 2' >> $AUDIT_FILE
	chmod o-rwx $AUDIT_FILE
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83716-1
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654275
  - NIST-800-171-3.3.1
  - NIST-800-171-3.4.3
  - NIST-800-53-AC-6(9)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - audit_rules_immutable
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Collect all files from /etc/audit/rules.d with .rules extension
  find:
    paths: /etc/audit/rules.d/
    patterns: '*.rules'
  register: find_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83716-1
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654275
  - NIST-800-171-3.3.1
  - NIST-800-171-3.4.3
  - NIST-800-53-AC-6(9)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - audit_rules_immutable
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Remove the -e option from all Audit config files
  lineinfile:
    path: '{{ item }}'
    regexp: ^\s*(?:-e)\s+.*$
    state: absent
  loop: '{{ find_rules_d.files | map(attribute=''path'') | list + [''/etc/audit/audit.rules'']
    }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83716-1
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654275
  - NIST-800-171-3.3.1
  - NIST-800-171-3.4.3
  - NIST-800-53-AC-6(9)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - audit_rules_immutable
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add Audit -e option into /etc/audit/rules.d/immutable.rules and /etc/audit/audit.rules
  lineinfile:
    path: '{{ item }}'
    create: true
    line: -e 2
    mode: o-rwx
  loop:
  - /etc/audit/audit.rules
  - /etc/audit/rules.d/immutable.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83716-1
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654275
  - NIST-800-171-3.3.1
  - NIST-800-171-3.4.3
  - NIST-800-53-AC-6(9)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.2
  - PCI-DSSv4-10.3.2
  - audit_rules_immutable
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-e%202%0A
        mode: 0600
        path: /etc/audit/rules.d/90-immutable.rules
        overwrite: true
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules configuration locked  oval:ssg-test_ari_locked_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_ari_locked_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-e\s+2\s*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl configuration locked  oval:ssg-test_ari_locked_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_ari_locked_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-e\s+2\s*$1
Ensure auditd Collects System Administrator Actions - /etc/sudoersxccdf_org.ssgproject.content_rule_audit_rules_sudoers mediumCCE-90176-9

Ensure auditd Collects System Administrator Actions - /etc/sudoers

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_sudoers
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_sudoers:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90176-9

References:  CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-002130, CCI-002132, CCI-002884, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654215, SV-258217r926638_rule

Description
At a minimum, the audit system should collect administrator actions for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-w /etc/sudoers -p wa -k actions
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-w /etc/sudoers -p wa -k actions
Rationale
The actions taken by system administrators should be audited to keep a record of what was executed on the system, as well as, for accountability purposes. Editing the sudoers file may be sign of an attacker trying to establish persistent methods to a system, auditing the editing of the sudoers files mitigates this risk.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/actions.rules"
    # If the actions.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/sudoers$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/sudoers -p wa -k actions" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check if watch rule for /etc/sudoers already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/sudoers\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key actions
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)actions$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Use /etc/audit/rules.d/actions.rules as the recipient for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/actions.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add watch rule for /etc/sudoers in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/sudoers -p wa -k actions
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check if watch rule for /etc/sudoers already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/sudoers\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add watch rule for /etc/sudoers in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/sudoers -p wa -k actions
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-90176-9
  - DISA-STIG-RHEL-09-654215
  - audit_rules_sudoers
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules sudoers  oval:ssg-test_audit_rules_sudoers_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_sudoers_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+/etc/sudoers[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl sudoers  oval:ssg-test_audit_rules_sudoers_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_sudoers_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+/etc/sudoers[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Ensure auditd Collects System Administrator Actions - /etc/sudoers.d/xccdf_org.ssgproject.content_rule_audit_rules_sudoers_d mediumCCE-89498-0

Ensure auditd Collects System Administrator Actions - /etc/sudoers.d/

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_sudoers_d
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_sudoers_d:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89498-0

References:  CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-002130, CCI-002132, CCI-002884, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654220, SV-258218r926641_rule

Description
At a minimum, the audit system should collect administrator actions for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-w /etc/sudoers.d/ -p wa -k actions
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-w /etc/sudoers.d/ -p wa -k actions
Rationale
The actions taken by system administrators should be audited to keep a record of what was executed on the system, as well as, for accountability purposes. Editing the sudoers file may be sign of an attacker trying to establish persistent methods to a system, auditing the editing of the sudoers files mitigates this risk.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/actions.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/sudoers.d/" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/actions.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/actions.rules"
    # If the actions.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/sudoers.d/" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/sudoers.d/ $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/sudoers.d/$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/sudoers.d/ -p wa -k actions" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check if watch rule for /etc/sudoers.d/ already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/sudoers.d/\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key actions
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)actions$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Use /etc/audit/rules.d/actions.rules as the recipient for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/actions.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add watch rule for /etc/sudoers.d/ in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/sudoers.d/ -p wa -k actions
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check if watch rule for /etc/sudoers.d/ already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/sudoers.d/\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Add watch rule for /etc/sudoers.d/ in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/sudoers.d/ -p wa -k actions
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-89498-0
  - DISA-STIG-RHEL-09-654220
  - audit_rules_sudoers_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules sudoers  oval:ssg-test_audit_rules_sudoers_d_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_sudoers_d_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+/etc/sudoers\.d/[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl sudoers  oval:ssg-test_audit_rules_sudoers_d_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_sudoers_d_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+/etc/sudoers\.d/[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Record Events When Privileged Executables Are Runxccdf_org.ssgproject.content_rule_audit_rules_suid_privilege_function mediumCCE-86402-5

Record Events When Privileged Executables Are Run

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_suid_privilege_function
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_suid_privilege_function:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86402-5

References:  CCI-001814, CCI-001882, CCI-001889, CCI-001880, CCI-001881, CCI-001878, CCI-001879, CCI-001875, CCI-001877, CCI-001914, CCI-002233, CCI-002234, CM-5(1), AU-7(a), AU-7(b), AU-8(b), AU-12(3), AC-6(9), SRG-OS-000326-GPOS-00126, SRG-OS-000327-GPOS-00127, SRG-APP-000343-CTR-000780, SRG-APP-000381-CTR-000905, RHEL-09-654010, SV-258176r926515_rule

Description
Verify the system generates an audit record when privileged functions are executed. If audit is using the "auditctl" tool to load the rules, run the following command:
$ sudo grep execve /etc/audit/audit.rules
If audit is using the "augenrules" tool to load the rules, run the following command:
$ sudo grep -r execve /etc/audit/rules.d
-a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -k setuid
-a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -k setuid
-a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -k setgid
-a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -k setgid
If both the "b32" and "b64" audit rules for "SUID" files are not defined, this is a finding. If both the "b32" and "b64" audit rules for "SGID" files are not defined, this is a finding.
Rationale
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised information system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider threats and the advanced persistent threat.
Warnings
warning  Note that these rules can be configured in a number of ways while still achieving the desired effect.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	
	OTHER_FILTERS="-C uid!=euid -F euid=0"
	
	AUID_FILTERS=""
	SYSCALL="execve"
	KEY="setuid"
	SYSCALL_GROUPING=""
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	
	OTHER_FILTERS="-C gid!=egid -F egid=0"
	
	AUID_FILTERS=""
	SYSCALL="execve"
	KEY="setgid"
	SYSCALL_GROUPING=""
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Service facts
  ansible.builtin.service_facts: null
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check the rules script being used
  ansible.builtin.command: grep '^ExecStartPost' /usr/lib/systemd/system/auditd.service
  register: check_rules_scripts_result
  changed_when: false
  failed_when: false
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set suid_audit_rules fact
  ansible.builtin.set_fact:
    suid_audit_rules:
    - rule: -a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -k setgid
      regex: ^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
    - rule: -a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -k setgid
      regex: ^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
    - rule: -a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -k setuid
      regex: ^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
    - rule: -a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -k setuid
      regex: ^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Update /etc/audit/rules.d/privileged.rules to audit privileged functions
  ansible.builtin.lineinfile:
    path: /etc/audit/rules.d/privileged.rules
    line: '{{  item.rule  }}'
    regexp: '{{ item.regex }}'
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"auditd.service" in ansible_facts.services'
  - '"augenrules" in check_rules_scripts_result.stdout'
  register: augenrules_audit_rules_privilege_function_update_result
  with_items: '{{ suid_audit_rules }}'
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Update Update /etc/audit/audit.rules to audit privileged functions
  ansible.builtin.lineinfile:
    path: /etc/audit/audit.rules
    line: '{{  item.rule  }}'
    regexp: '{{ item.regex }}'
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"auditd.service" in ansible_facts.services'
  - '"auditctl" in check_rules_scripts_result.stdout'
  register: auditctl_audit_rules_privilege_function_update_result
  with_items: '{{ suid_audit_rules }}'
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Restart Auditd
  ansible.builtin.command: /usr/sbin/service auditd restart
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (augenrules_audit_rules_privilege_function_update_result.changed or auditctl_audit_rules_privilege_function_update_result.changed)
  - ansible_facts.services["auditd.service"].state == "running"
  tags:
  - CCE-86402-5
  - DISA-STIG-RHEL-09-654010
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(3)
  - NIST-800-53-AU-7(a)
  - NIST-800-53-AU-7(b)
  - NIST-800-53-AU-8(b)
  - NIST-800-53-CM-5(1)
  - audit_rules_suid_privilege_function
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ -a%20always%2Cexit%20-F%20arch%3Db32%20-S%20execve%20-C%20uid%21%3Deuid%20-F%20euid%3D0%20-k%20execpriv%0A-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20execve%20-C%20uid%21%3Deuid%20-F%20euid%3D0%20-k%20execpriv%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20execve%20-C%20gid%21%3Degid%20-F%20egid%3D0%20-k%20execpriv%0A-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20execve%20-C%20gid%21%3Degid%20-F%20egid%3D0%20-k%20execpriv%0A }}
        mode: 0600
        path: /etc/audit/rules.d/75-audit-suid-privilege-function.rules
        overwrite: true
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules 32-bit uid privileged function  oval:ssg-test_32bit_uid_privileged_function_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_uid_privileged_function_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit uid privileged function  oval:ssg-test_64bit_uid_privileged_function_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_uid_privileged_function_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 32-bit gid privileged function  oval:ssg-test_32bit_gid_privileged_function_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_gid_privileged_function_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit augenrules 64-bit gid privileged function  oval:ssg-test_64bit_gid_privileged_function_augenrules:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_gid_privileged_function_augenrules:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl 32-bit uid privileged function  oval:ssg-test_32bit_uid_privileged_function_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_uid_privileged_function_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit uid privileged_function  oval:ssg-test_64bit_uid_privileged_function_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_uid_privileged_function_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+uid!=euid[\s]+-F[\s]+euid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 32-bit gid privileged function  oval:ssg-test_32bit_gid_privileged_function_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_32bit_gid_privileged_function_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b32[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1

audit auditctl 64-bit gid privileged_function  oval:ssg-test_64bit_gid_privileged_function_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_64bit_gid_privileged_function_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^[\s]*-a[\s]+always,exit[\s]+-F[\s]+arch=b64[\s]+-S[\s]+execve[\s]+-C[\s]+gid!=egid[\s]+-F[\s]+egid=0[\s]+(?:-k[\s]+|-F[\s]+key=)[\S]+[\s]*$1
Shutdown System When Auditing Failures Occurxccdf_org.ssgproject.content_rule_audit_rules_system_shutdown mediumCCE-83709-6

Shutdown System When Auditing Failures Occur

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_system_shutdown
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_system_shutdown:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83709-6

References:  1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, 3.3.1, 3.3.4, CCI-000139, CCI-000140, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, AU-5(b), SC-24, CM-6(a), PR.PT-1, SRG-OS-000046-GPOS-00022, SRG-OS-000047-GPOS-00023, RHEL-09-654265, SV-258227r926668_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to to the bottom of a file with suffix .rules in the directory /etc/audit/rules.d:
-f 2
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to the bottom of the /etc/audit/audit.rules file:
-f 2
Rationale
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected.

Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_audit_failure_mode='2'


# Traverse all of:
#
# /etc/audit/audit.rules,			(for auditctl case)
# /etc/audit/rules.d/*.rules			(for augenrules case)
find /etc/audit /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -exec sed -i '/-f[[:space:]]\+.*/d' {} ';'

for AUDIT_FILE in "/etc/audit/audit.rules" "/etc/audit/rules.d/immutable.rules"
do
	echo '' >> $AUDIT_FILE
	echo '# Set the audit.rules configuration to halt system upon audit failure per security requirements' >> $AUDIT_FILE
	echo "-f $var_audit_failure_mode" >> $AUDIT_FILE
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83709-6
  - DISA-STIG-RHEL-09-654265
  - NIST-800-171-3.3.1
  - NIST-800-171-3.3.4
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-24
  - audit_rules_system_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
- name: XCCDF Value var_audit_failure_mode # promote to variable
  set_fact:
    var_audit_failure_mode: !!str 2
  tags:
    - always

- name: Collect all files from /etc/audit/rules.d with .rules extension
  find:
    paths: /etc/audit/rules.d/
    patterns: '*.rules'
  register: find_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83709-6
  - DISA-STIG-RHEL-09-654265
  - NIST-800-171-3.3.1
  - NIST-800-171-3.3.4
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-24
  - audit_rules_system_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Remove the -f option from all Audit config files
  lineinfile:
    path: '{{ item }}'
    regexp: ^\s*(?:-f)\s+.*$
    state: absent
  loop: '{{ find_rules_d.files | map(attribute=''path'') | list + [''/etc/audit/audit.rules'']
    }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83709-6
  - DISA-STIG-RHEL-09-654265
  - NIST-800-171-3.3.1
  - NIST-800-171-3.3.4
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-24
  - audit_rules_system_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add Audit -f option into /etc/audit/rules.d/immutable.rules and /etc/audit/audit.rules
  lineinfile:
    path: '{{ item }}'
    create: true
    line: -f {{ var_audit_failure_mode }}
  loop:
  - /etc/audit/audit.rules
  - /etc/audit/rules.d/immutable.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83709-6
  - DISA-STIG-RHEL-09-654265
  - NIST-800-171-3.3.1
  - NIST-800-171-3.3.4
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-24
  - audit_rules_system_shutdown
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules configuration shutdown  oval:ssg-test_ars_shutdown_augenrules:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/rules.d/audit.rules-f 1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit auditctl configuration shutdown  oval:ssg-test_ars_shutdown_auditctl:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/audit.rules-f 1
Record Events that Modify User/Group Information - /etc/groupxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_group mediumCCE-83722-9

Record Events that Modify User/Group Information - /etc/group

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_group
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_usergroup_modification_group:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83722-9

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-001405, CCI-001683, CCI-001684, CCI-001685, CCI-001686, CCI-002130, CCI-002132, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.5, 10.2.1.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654225, 4.1.3.8, SV-258219r926644_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/group -p wa -k audit_rules_usergroup_modification


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:

-w /etc/group -p wa -k audit_rules_usergroup_modification
Rationale
In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/group" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/group $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/group$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/group -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/group" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/group" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/group $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/group$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/group -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/group already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/group\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_usergroup_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_usergroup_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_usergroup_modification.rules as the recipient
    for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/audit_rules_usergroup_modification.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/group in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/group -p wa -k audit_rules_usergroup_modification
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/group already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/group\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/group in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/group -p wa -k audit_rules_usergroup_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-83722-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654225
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_group
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules group  oval:ssg-test_audit_rules_usergroup_modification_group_augen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_group_augen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+\/etc\/group[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit group  oval:ssg-test_audit_rules_usergroup_modification_group_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_group_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+\/etc\/group[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Record Events that Modify User/Group Information - /etc/gshadowxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_gshadow mediumCCE-83723-7

Record Events that Modify User/Group Information - /etc/gshadow

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_gshadow
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_usergroup_modification_gshadow:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83723-7

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-001405, CCI-001683, CCI-001684, CCI-001685, CCI-001686, CCI-002130, CCI-002132, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.5, 10.2.1.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654230, 4.1.3.8, SV-258220r926647_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/gshadow -p wa -k audit_rules_usergroup_modification


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:

-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
Rationale
In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/gshadow" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/gshadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/gshadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/gshadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/gshadow" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/gshadow" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/gshadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/gshadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/gshadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/gshadow already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/gshadow\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_usergroup_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_usergroup_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_usergroup_modification.rules as the recipient
    for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/audit_rules_usergroup_modification.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/gshadow in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/gshadow -p wa -k audit_rules_usergroup_modification
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/gshadow already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/gshadow\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/gshadow in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/gshadow -p wa -k audit_rules_usergroup_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-83723-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654230
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules gshadow  oval:ssg-test_audit_rules_usergroup_modification_gshadow_augen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_gshadow_augen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+\/etc\/gshadow[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit gshadow  oval:ssg-test_audit_rules_usergroup_modification_gshadow_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_gshadow_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+\/etc\/gshadow[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Record Events that Modify User/Group Information - /etc/security/opasswdxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_opasswd mediumCCE-83712-0

Record Events that Modify User/Group Information - /etc/security/opasswd

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_opasswd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_usergroup_modification_opasswd:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83712-0

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-001405, CCI-001683, CCI-001684, CCI-001685, CCI-001686, CCI-002130, CCI-002132, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.5, 10.2.1.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654235, 4.1.3.8, SV-258221r926650_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:

-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification
Rationale
In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/security/opasswd" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/security/opasswd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/security/opasswd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/security/opasswd" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/security/opasswd" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/security/opasswd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/security/opasswd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/security/opasswd already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/security/opasswd\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_usergroup_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_usergroup_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_usergroup_modification.rules as the recipient
    for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/audit_rules_usergroup_modification.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/security/opasswd in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/security/opasswd already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/security/opasswd\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/security/opasswd in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-83712-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654235
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_opasswd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules opasswd  oval:ssg-test_audit_rules_usergroup_modification_opasswd_augen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_opasswd_augen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+\/etc\/security\/opasswd[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit opasswd  oval:ssg-test_audit_rules_usergroup_modification_opasswd_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_opasswd_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+\/etc\/security\/opasswd[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Record Events that Modify User/Group Information - /etc/passwdxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_passwd mediumCCE-83714-6

Record Events that Modify User/Group Information - /etc/passwd

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_passwd
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_usergroup_modification_passwd:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83714-6

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-001405, CCI-001683, CCI-001684, CCI-001685, CCI-001686, CCI-002130, CCI-002132, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.5, 10.2.1.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000304-GPOS-00121, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, SRG-OS-000274-GPOS-00104, SRG-OS-000275-GPOS-00105, SRG-OS-000276-GPOS-00106, SRG-OS-000277-GPOS-00107, RHEL-09-654240, 4.1.3.8, SV-258222r926653_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/passwd -p wa -k audit_rules_usergroup_modification


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:

-w /etc/passwd -p wa -k audit_rules_usergroup_modification
Rationale
In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/passwd" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/passwd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/passwd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/passwd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/passwd" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/passwd" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/passwd $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/passwd$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/passwd -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/passwd already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/passwd\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_usergroup_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_usergroup_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_usergroup_modification.rules as the recipient
    for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/audit_rules_usergroup_modification.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/passwd in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/passwd -p wa -k audit_rules_usergroup_modification
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/passwd already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/passwd\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/passwd in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/passwd -p wa -k audit_rules_usergroup_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-83714-6
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654240
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules passwd  oval:ssg-test_audit_rules_usergroup_modification_passwd_augen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_passwd_augen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+\/etc\/passwd[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit passwd  oval:ssg-test_audit_rules_usergroup_modification_passwd_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_passwd_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+\/etc\/passwd[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
Record Events that Modify User/Group Information - /etc/shadowxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_shadow mediumCCE-83725-2

Record Events that Modify User/Group Information - /etc/shadow

Rule IDxccdf_org.ssgproject.content_rule_audit_rules_usergroup_modification_shadow
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-audit_rules_usergroup_modification_shadow:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83725-2

References:  BP28(R73), A.3.SEC-RHEL7, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001403, CCI-001404, CCI-001405, CCI-001683, CCI-001684, CCI-001685, CCI-001686, CCI-002130, CCI-002132, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.2, CIP-004-6 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.5, 10.2.1.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, RHEL-09-654245, 4.1.3.8, SV-258223r926656_rule

Description
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/shadow -p wa -k audit_rules_usergroup_modification


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:

-w /etc/shadow -p wa -k audit_rules_usergroup_modification
Rationale
In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()


# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
files_to_inspect+=('/etc/audit/audit.rules')

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/shadow" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/shadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/shadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/shadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done
# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
files_to_inspect=()

# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' to list of files for inspection.
readarray -t matches < <(grep -HP "[\s]*-w[\s]+/etc/shadow" /etc/audit/rules.d/*.rules)

# For each of the matched entries
for match in "${matches[@]}"
do
    # Extract filepath from the match
    rulesd_audit_file=$(echo $match | cut -f1 -d ':')
    # Append that path into list of files for inspection
    files_to_inspect+=("$rulesd_audit_file")
done
# Case when particular audit rule isn't defined yet
if [ "${#files_to_inspect[@]}" -eq "0" ]
then
    # Append '/etc/audit/rules.d/audit_rules_usergroup_modification.rules' into list of files for inspection
    key_rule_file="/etc/audit/rules.d/audit_rules_usergroup_modification.rules"
    # If the audit_rules_usergroup_modification.rules file doesn't exist yet, create it with correct permissions
    if [ ! -e "$key_rule_file" ]
    then
        touch "$key_rule_file"
        chmod 0640 "$key_rule_file"
    fi
    files_to_inspect+=("$key_rule_file")
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do
    # Check if audit watch file system object rule for given path already present
    if grep -q -P -- "^[\s]*-w[\s]+/etc/shadow" "$audit_rules_file"
    then
        # Rule is found => verify yet if existing rule definition contains
        # all of the required access type bits

        # Define BRE whitespace class shortcut
        sp="[[:space:]]"
        # Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
        current_access_bits=$(sed -ne "s#$sp*-w$sp\+/etc/shadow $sp\+-p$sp\+\([rxwa]\{1,4\}\).*#\1#p" "$audit_rules_file")
        # Split required access bits string into characters array
        # (to check bit's presence for one bit at a time)
        for access_bit in $(echo "wa" | grep -o .)
        do
            # For each from the required access bits (e.g. 'w', 'a') check
            # if they are already present in current access bits for rule.
            # If not, append that bit at the end
            if ! grep -q "$access_bit" <<< "$current_access_bits"
            then
                # Concatenate the existing mask with the missing bit
                current_access_bits="$current_access_bits$access_bit"
            fi
        done
        # Propagate the updated rule's access bits (original + the required
        # ones) back into the /etc/audit/audit.rules file for that rule
        sed -i "s#\($sp*-w$sp\+/etc/shadow$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)#\1$current_access_bits\3#" "$audit_rules_file"
    else
        # Rule isn't present yet. Append it at the end of $audit_rules_file file
        # with proper key

        echo "-w /etc/shadow -p wa -k audit_rules_usergroup_modification" >> "$audit_rules_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/shadow already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/shadow\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_usergroup_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_usergroup_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_usergroup_modification.rules as the recipient
    for the rule
  set_fact:
    all_files:
    - /etc/audit/rules.d/audit_rules_usergroup_modification.rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
    - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
    is defined and find_existing_watch_rules_d.matched == 0
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/shadow in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/shadow -p wa -k audit_rules_usergroup_modification
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
    == 0
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Check if watch rule for /etc/shadow already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/shadow\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Add watch rule for /etc/shadow in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/shadow -p wa -k audit_rules_usergroup_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
    == 0
  tags:
  - CCE-83725-2
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-654245
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-2(4)
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - audit_rules_usergroup_modification_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy
OVAL test results details

audit augenrules  oval:ssg-test_audit_rules_augenrules:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/systemd/system/auditd.serviceExecStartPost=-/sbin/augenrules --load

audit augenrules shadow  oval:ssg-test_audit_rules_usergroup_modification_shadow_augen:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_shadow_augen:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/audit/rules\.d/.*\.rules$^\-w[\s]+\/etc\/shadow[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1

audit auditctl  oval:ssg-test_audit_rules_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/usr/lib/systemd/system/auditd.service^ExecStartPost=\-\/sbin\/auditctl.*$1

audit shadow  oval:ssg-test_audit_rules_usergroup_modification_shadow_auditctl:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_rules_usergroup_modification_shadow_auditctl:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/audit.rules^\-w[\s]+\/etc\/shadow[\s]+\-p[\s]+\b([rx]*w[rx]*a[rx]*|[rx]*a[rx]*w[rx]*)\b.*$1
System Audit Directories Must Be Group Owned By Rootxccdf_org.ssgproject.content_rule_directory_group_ownership_var_log_audit mediumCCE-90516-6

System Audit Directories Must Be Group Owned By Root

Rule IDxccdf_org.ssgproject.content_rule_directory_group_ownership_var_log_audit
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-directory_group_ownership_var_log_audit:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90516-6

References:  1, 11, 12, 13, 14, 15, 16, 18, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO01.06, APO11.04, APO12.06, BAI03.05, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, DSS06.02, MEA02.01, 3.3.1, CCI-000162, CCI-000163, CCI-000164, CCI-001314, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 6.1, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), AU-9(4), DE.AE-3, DE.AE-5, PR.AC-4, PR.DS-5, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.5.1, SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000206-GPOS-00084, RHEL-09-653080, SV-258165r926482_rule

Description
All audit directories must be group owned by root user. By default, the path for audit log is
/var/log/audit/
. To properly set the group owner of /var/log/audit, run the command:
$ sudo chgrp root /var/log/audit
If log_group in /etc/audit/auditd.conf is set to a group other than the root group account, change the group ownership of the audit directories to this specific group.
Rationale
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
OVAL test results details

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

/var/log/audit directories uid root gid root  oval:ssg-test_group_ownership_var_log_audit_directories:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_group_ownership_var_log_audit_directories:obj:1 of type file_object
BehaviorsPathFilenameFilter
/var/log/audit/audit.log
/var/log/audit
no valueno valueoval:ssg-state_group_owner_not_root_var_log_audit_directories:ste:1

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

/var/log/audit directories uid root gid root  oval:ssg-test_group_ownership_default_var_log_audit_directories:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_group_ownership_default_var_log_audit_directories:obj:1 of type file_object
BehaviorsPathFilenameFilter
no value/var/log/auditno valueoval:ssg-state_group_owner_not_root_var_log_audit_directories:ste:1

log_group = root  oval:ssg-test_auditd_conf_log_group_not_root:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_group = root

log_group is set  oval:ssg-test_auditd_conf_log_group_is_set:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_group = root

/var/log/audit directories uid root gid root  oval:ssg-test_group_ownership_var_log_audit_directories-non_root:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_group_ownership_var_log_audit_directories-non_root:obj:1 of type file_object
BehaviorsPathFilenameFilter
no value/var/log/auditno valueoval:ssg-state_group_owner_not_root_var_log_audit_directories-non_root:ste:1
System Audit Directories Must Be Owned By Rootxccdf_org.ssgproject.content_rule_directory_ownership_var_log_audit mediumCCE-85869-6

System Audit Directories Must Be Owned By Root

Rule IDxccdf_org.ssgproject.content_rule_directory_ownership_var_log_audit
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-directory_ownership_var_log_audit:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85869-6

References:  1, 11, 12, 13, 14, 15, 16, 18, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO01.06, APO11.04, APO12.06, BAI03.05, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, DSS06.02, MEA02.01, 3.3.1, CCI-000162, CCI-000163, CCI-000164, CCI-001314, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 6.1, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), AU-9(4), DE.AE-3, DE.AE-5, PR.AC-4, PR.DS-5, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.5.1, SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000206-GPOS-00084, RHEL-09-653085, SV-258166r926485_rule

Description
All audit directories must be owned by root user. By default, the path for audit log is
/var/log/audit/
. To properly set the owner of /var/log/audit, run the command:
$ sudo chown root /var/log/audit 
Rationale
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
OVAL test results details

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

log_file's directory uid root gid root  oval:ssg-test_user_ownership_var_log_audit_path:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_user_ownership_var_log_audit_path:obj:1 of type file_object
PathFilenameFilter
/var/log/audit
/var/log/audit/audit.log
no valueoval:ssg-state_owner_not_root_var_log_audit_directories:ste:1

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

/var/log/audit directories uid root gid root  oval:ssg-test_user_ownership_var_log_audit_directories:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_user_ownership_var_log_audit_directories:obj:1 of type file_object
PathFilenameFilter
/var/log/auditno valueoval:ssg-state_owner_not_root_var_log_audit_directories:ste:1
System Audit Logs Must Have Mode 0640 or Less Permissivexccdf_org.ssgproject.content_rule_file_permissions_var_log_audit mediumCCE-83720-3

System Audit Logs Must Have Mode 0640 or Less Permissive

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_var_log_audit
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_var_log_audit:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83720-3

References:  A.3.SEC-RHEL2, 1, 11, 12, 13, 14, 15, 16, 18, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO01.06, APO11.04, APO12.06, BAI03.05, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, DSS06.02, MEA02.01, 3.3.1, CCI-000162, CCI-000163, CCI-000164, CCI-001314, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 6.1, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), AU-9(4), DE.AE-3, DE.AE-5, PR.AC-4, PR.DS-5, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.5, 10.3.1, SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000206-GPOS-00084, SRG-APP-000118-CTR-000240, RHEL-09-653090, 4.1.4.1, SV-258167r926488_rule

Description
Determine where the audit logs are stored with the following command:
$ sudo grep -iw log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Configure the audit log to be protected from unauthorized read access by setting the correct permissive mode with the following command:
$ sudo chmod 0600 audit_log_file
By default, audit_log_file is "/var/log/audit/audit.log".
Rationale
If users can write to audit logs, audit trails can be modified or destroyed.
OVAL test results details

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

audit log files mode 0600  oval:ssg-test_file_permissions_audit_log:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_log_files:obj:1 of type file_object
FilepathFilter
/var/log/audit/audit.logoval:ssg-state_not_mode_0600:ste:1

log_file not set  oval:ssg-test_auditd_conf_log_file_not_set:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_file = /var/log/audit/audit.log

default audit log files mode 0600  oval:ssg-test_file_permissions_default_audit_log:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_audit_default_log_files:obj:1 of type file_object
FilepathFilter
/var/log/audit/audit.logoval:ssg-state_not_mode_0600:ste:1
Configure a Sufficiently Large Partition for Audit Logsxccdf_org.ssgproject.content_rule_auditd_audispd_configure_sufficiently_large_partition mediumCCE-88173-0

Configure a Sufficiently Large Partition for Audit Logs

Rule IDxccdf_org.ssgproject.content_rule_auditd_audispd_configure_sufficiently_large_partition
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88173-0

References:  CCI-001849, SRG-OS-000341-GPOS-00132, SRG-OS-000342-GPOS-00133, RHEL-09-653030, SV-258155r926452_rule

Description
The Red Hat Enterprise Linux 9 operating system must allocate audit record storage capacity to store at least one weeks worth of audit records when audit records are not immediately sent to a central audit record storage facility. The partition size needed to capture a week's worth of audit records is based on the activity level of the system and the total storage capacity available. In normal circumstances, 10.0 GB of storage space for audit records will be sufficient. Determine which partition the audit records are being written to with the following command:
$ sudo grep log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Check the size of the partition that audit records are written to with the following command:
$ sudo df -h /var/log/audit/
/dev/sda2 24G 10.4G 13.6G 43% /var/log/audit
Rationale
Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Off-loading is a common process in information systems with limited audit storage capacity.
Evaluation messages
info 
No candidate or applicable check found.
Configure auditd to use audispd's syslog pluginxccdf_org.ssgproject.content_rule_auditd_audispd_syslog_plugin_activated mediumCCE-83695-7

Configure auditd to use audispd's syslog plugin

Rule IDxccdf_org.ssgproject.content_rule_auditd_audispd_syslog_plugin_activated
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_audispd_syslog_plugin_activated:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83695-7

References:  1, 11, 12, 13, 14, 15, 16, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO11.04, APO12.06, BAI03.05, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, 3.3.1, CCI-000136, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii), 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, AU-4(1), CM-6(a), DE.AE-3, DE.AE-5, PR.PT-1, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.3, 10.3.3, SRG-OS-000479-GPOS-00224, SRG-OS-000342-GPOS-00133, RHEL-09-652035, SV-258145r926422_rule

Description
To configure the auditd service to use the syslog plug-in of the audispd audit event multiplexor, set the active line in /etc/audit/plugins.d/syslog.conf to yes. Restart the auditd service:
$ sudo service auditd restart
Rationale
The auditd service does not include the ability to send audit records to a centralized server for management directly. It does, however, include a plug-in for audit event multiplexor (audispd) to pass audit records to the local syslog server.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_syslog_active="yes"

AUDISP_SYSLOGCONFIG=/etc/audit/plugins.d/syslog.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^active")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_syslog_active"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^active\\>" "$AUDISP_SYSLOGCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^active\\>.*/$escaped_formatted_output/gi" "$AUDISP_SYSLOGCONFIG"
else
    if [[ -s "$AUDISP_SYSLOGCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDISP_SYSLOGCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDISP_SYSLOGCONFIG"
    fi
    cce="CCE-83695-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDISP_SYSLOGCONFIG" >> "$AUDISP_SYSLOGCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDISP_SYSLOGCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83695-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-652035
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-4(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.3
  - PCI-DSSv4-10.3.3
  - auditd_audispd_syslog_plugin_activated
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable syslog plugin
  lineinfile:
    dest: /etc/audit/plugins.d/syslog.conf
    regexp: ^active
    line: active = yes
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83695-7
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-652035
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-4(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.3
  - PCI-DSSv4-10.3.3
  - auditd_audispd_syslog_plugin_activated
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

audispd syslog plugin activated  oval:ssg-test_auditd_audispd_syslog_plugin_activated:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_auditd_audispd_syslog_plugin_activated:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/plugins.d/syslog.conf^[ ]*active[ ]+=[ ]+yes[ ]*$1
Configure auditd Disk Error Action on Disk Errorxccdf_org.ssgproject.content_rule_auditd_data_disk_error_action_stig mediumCCE-88303-3

Configure auditd Disk Error Action on Disk Error

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_disk_error_action_stig
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_disk_error_action_stig:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88303-3

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, CCI-000140, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, SRG-OS-000047-GPOS-00023, RHEL-09-653020, SV-258153r926446_rule

Description
The auditd service can be configured to take an action when there is a disk error. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting ACTION appropriately:
disk_error_action = ACTION
Set this value to single to cause the system to switch to single-user mode for corrective action. Acceptable values also include syslog, exec, single, and halt. For certain systems, the need for availability outweighs the need to log all actions, and a different setting should be determined. Details regarding all possible values for ACTION are described in the auditd.conf man page.
Rationale
Taking appropriate action in case of disk errors will minimize the possibility of losing audit records.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_disk_error_action='halt'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^disk_error_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_disk_error_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^disk_error_action\\>" "/etc/audit/auditd.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^disk_error_action\\>.*/$escaped_formatted_output/gi" "/etc/audit/auditd.conf"
else
    if [[ -s "/etc/audit/auditd.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/audit/auditd.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/audit/auditd.conf"
    fi
    cce="CCE-88303-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/audit/auditd.conf" >> "/etc/audit/auditd.conf"
    printf '%s\n' "$formatted_output" >> "/etc/audit/auditd.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88303-3
  - DISA-STIG-RHEL-09-653020
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - auditd_data_disk_error_action_stig
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_disk_error_action # promote to variable
  set_fact:
    var_auditd_disk_error_action: !!str halt
  tags:
    - always

- name: Configure auditd Disk Error Action on Disk Error
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: disk_error_action = {{ var_auditd_disk_error_action }}
    regexp: ^\s*disk_error_action\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88303-3
  - DISA-STIG-RHEL-09-653020
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - auditd_data_disk_error_action_stig
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20%7B%7B.var_auditd_flush%7D%7D%0Afreq%20%3D%2050%0Amax_log_file%20%3D%20%7B%7B.var_auditd_max_log_file%7D%7D%0Anum_logs%20%3D%20%7B%7B.var_auditd_num_logs%7D%7D%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20%7B%7B.var_auditd_max_log_file_action%7D%7D%0Aspace_left%20%3D%20%7B%7B.var_auditd_space_left%7D%7D%0Aspace_left_action%20%3D%20%7B%7B.var_auditd_space_left_action%7D%7D%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20%7B%7B.var_auditd_action_mail_acct%7D%7D%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20%7B%7B.var_auditd_disk_full_action%7D%7D%0Adisk_error_action%20%3D%20%7B%7B.var_auditd_disk_error_action%7D%7D%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d }}
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true
OVAL test results details

disk full action  oval:ssg-test_auditd_data_disk_error_action_stig_syslog:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_error_action = SUSPEND

disk full action  oval:ssg-test_auditd_data_disk_error_action_stig_single:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_error_action = SUSPEND

disk full action  oval:ssg-test_auditd_data_disk_error_action_stig_halt:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_error_action = SUSPEND
Configure auditd Disk Full Action when Disk Space Is Fullxccdf_org.ssgproject.content_rule_auditd_data_disk_full_action_stig mediumCCE-88336-3

Configure auditd Disk Full Action when Disk Space Is Full

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_disk_full_action_stig
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_disk_full_action_stig:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88336-3

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, CCI-000140, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, SRG-OS-000047-GPOS-00023, RHEL-09-653025, SV-258154r926449_rule

Description
The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting ACTION appropriately:
disk_full_action = ACTION
Set this value to single to cause the system to switch to single-user mode for corrective action. Acceptable values also include syslog, single, and halt. For certain systems, the need for availability outweighs the need to log all actions, and a different setting should be determined. Details regarding all possible values for ACTION are described in the auditd.conf man page.
Rationale
Taking appropriate action in case of a filled audit storage volume will minimize the possibility of losing audit records.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_disk_full_action='halt'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^disk_full_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_disk_full_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^disk_full_action\\>" "/etc/audit/auditd.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^disk_full_action\\>.*/$escaped_formatted_output/gi" "/etc/audit/auditd.conf"
else
    if [[ -s "/etc/audit/auditd.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/audit/auditd.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/audit/auditd.conf"
    fi
    cce="CCE-88336-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/audit/auditd.conf" >> "/etc/audit/auditd.conf"
    printf '%s\n' "$formatted_output" >> "/etc/audit/auditd.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88336-3
  - DISA-STIG-RHEL-09-653025
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - auditd_data_disk_full_action_stig
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_disk_full_action # promote to variable
  set_fact:
    var_auditd_disk_full_action: !!str halt
  tags:
    - always

- name: Configure auditd Disk Full Action when Disk Space Is Full
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: disk_full_action = {{ var_auditd_disk_full_action }}
    regexp: ^\s*disk_full_action\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88336-3
  - DISA-STIG-RHEL-09-653025
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - auditd_data_disk_full_action_stig
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20%7B%7B.var_auditd_flush%7D%7D%0Afreq%20%3D%2050%0Amax_log_file%20%3D%20%7B%7B.var_auditd_max_log_file%7D%7D%0Anum_logs%20%3D%20%7B%7B.var_auditd_num_logs%7D%7D%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20%7B%7B.var_auditd_max_log_file_action%7D%7D%0Aspace_left%20%3D%20%7B%7B.var_auditd_space_left%7D%7D%0Aspace_left_action%20%3D%20%7B%7B.var_auditd_space_left_action%7D%7D%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20%7B%7B.var_auditd_action_mail_acct%7D%7D%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20%7B%7B.var_auditd_disk_full_action%7D%7D%0Adisk_error_action%20%3D%20%7B%7B.var_auditd_disk_error_action%7D%7D%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d }}
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true
OVAL test results details

disk full action  oval:ssg-test_auditd_data_disk_full_action_stig_syslog:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_full_action = SUSPEND

disk full action  oval:ssg-test_auditd_data_disk_full_action_stig_single:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_full_action = SUSPEND

disk full action  oval:ssg-test_auditd_data_disk_full_action_stig_halt:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confdisk_full_action = SUSPEND
Configure auditd mail_acct Action on Low Disk Spacexccdf_org.ssgproject.content_rule_auditd_data_retention_action_mail_acct mediumCCE-83698-1

Configure auditd mail_acct Action on Low Disk Space

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_action_mail_acct
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_action_mail_acct:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83698-1

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, 3.3.1, CCI-000139, CCI-001855, 164.312(a)(2)(ii), 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, CIP-003-8 R1.3, CIP-003-8 R3, CIP-003-8 R3.1, CIP-003-8 R3.2, CIP-003-8 R3.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-5(1), AU-5(a), AU-5(2), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7.a, 10.5.1, SRG-OS-000046-GPOS-00022, SRG-OS-000343-GPOS-00134, RHEL-09-653070, 4.1.2.3, SV-258163r926476_rule

Description
The auditd service can be configured to send email to a designated account in certain situations. Add or correct the following line in /etc/audit/auditd.conf to ensure that administrators are notified via email for those situations:
action_mail_acct = root
Rationale
Email sent to the root account is typically aliased to the administrators of the system, who can take appropriate action.
OVAL test results details

email account for actions  oval:ssg-test_auditd_data_retention_action_mail_acct:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.confaction_mail_acct = root
Configure auditd admin_space_left Action on Low Disk Spacexccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_action mediumCCE-83700-5

Configure auditd admin_space_left Action on Low Disk Space

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_action
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_admin_space_left_action:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83700-5

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, 3.3.1, CCI-000140, CCI-001343, CCI-001855, 164.312(a)(2)(ii), 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7, 10.5.1, SRG-OS-000343-GPOS-00134, RHEL-09-653050, 4.1.2.3, SV-258159r926464_rule

Description
The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting ACTION appropriately:
admin_space_left_action = ACTION
Set this value to single to cause the system to switch to single user mode for corrective action. Acceptable values also include suspend and halt. For certain systems, the need for availability outweighs the need to log all actions, and a different setting should be determined. Details regarding all possible values for ACTION are described in the auditd.conf man page.
Rationale
Administrators should be made aware of an inability to record audit records. If a separate partition or logical volume of adequate size is used, running low on space for audit records should never occur.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_admin_space_left_action='halt'


AUDITCONFIG=/etc/audit/auditd.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^admin_space_left_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_admin_space_left_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^admin_space_left_action\\>" "$AUDITCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^admin_space_left_action\\>.*/$escaped_formatted_output/gi" "$AUDITCONFIG"
else
    if [[ -s "$AUDITCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDITCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDITCONFIG"
    fi
    cce="CCE-83700-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDITCONFIG" >> "$AUDITCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDITCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83700-5
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-653050
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - auditd_data_retention_admin_space_left_action
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_admin_space_left_action # promote to variable
  set_fact:
    var_auditd_admin_space_left_action: !!str halt
  tags:
    - always

- name: Configure auditd admin_space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: admin_space_left_action = {{ var_auditd_admin_space_left_action }}
    regexp: ^\s*admin_space_left_action\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83700-5
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-653050
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - auditd_data_retention_admin_space_left_action
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20%7B%7B.var_auditd_flush%7D%7D%0Afreq%20%3D%2050%0Amax_log_file%20%3D%20%7B%7B.var_auditd_max_log_file%7D%7D%0Anum_logs%20%3D%20%7B%7B.var_auditd_num_logs%7D%7D%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20%7B%7B.var_auditd_max_log_file_action%7D%7D%0Aspace_left%20%3D%20%7B%7B.var_auditd_space_left%7D%7D%0Aspace_left_action%20%3D%20%7B%7B.var_auditd_space_left_action%7D%7D%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20%7B%7B.var_auditd_action_mail_acct%7D%7D%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20%7B%7B.var_auditd_disk_full_action%7D%7D%0Adisk_error_action%20%3D%20%7B%7B.var_auditd_disk_error_action%7D%7D%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d }}
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true
OVAL test results details

space left action  oval:ssg-test_auditd_data_retention_admin_space_left_action:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confadmin_space_left_action = SUSPEND
Configure auditd admin_space_left on Low Disk Spacexccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_percentage mediumCCE-88816-4

Configure auditd admin_space_left on Low Disk Space

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_admin_space_left_percentage
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_admin_space_left_percentage:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88816-4

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, CCI-001855, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7, SRG-OS-000343-GPOS-00134, RHEL-09-653045, SV-258158r926461_rule

Description
The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting PERCENTAGE appropriately:
admin_space_left = PERCENTAGE%
Set this value to 5 to cause the system to perform an action.
Rationale
Notifying administrators of an impending disk space problem may allow them to take corrective action prior to any disruption.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_admin_space_left_percentage='5'


grep -q "^admin_space_left[[:space:]]*=.*$" /etc/audit/auditd.conf && \
  sed -i "s/^admin_space_left[[:space:]]*=.*$/admin_space_left = $var_auditd_admin_space_left_percentage%/g" /etc/audit/auditd.conf || \
  echo "admin_space_left = $var_auditd_admin_space_left_percentage%" >> /etc/audit/auditd.conf

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88816-4
  - DISA-STIG-RHEL-09-653045
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - auditd_data_retention_admin_space_left_percentage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_admin_space_left_percentage # promote to variable
  set_fact:
    var_auditd_admin_space_left_percentage: !!str 5
  tags:
    - always

- name: Configure auditd admin_space_left on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: admin_space_left = {{ var_auditd_admin_space_left_percentage }}%
    regexp: ^\s*admin_space_left\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88816-4
  - DISA-STIG-RHEL-09-653045
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - auditd_data_retention_admin_space_left_percentage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

admin space left action   oval:ssg-test_auditd_data_retention_admin_space_left_percentage:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_auditd_data_retention_admin_space_left_percentage:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/auditd.conf^[\s]*admin_space_left[\s]+=[\s]+(\d+)%[\s]*$1
Configure auditd max_log_file_action Upon Reaching Maximum Log Sizexccdf_org.ssgproject.content_rule_auditd_data_retention_max_log_file_action_stig mediumCCE-88396-7

Configure auditd max_log_file_action Upon Reaching Maximum Log Size

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_max_log_file_action_stig
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_max_log_file_action_stig:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88396-7

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, CCI-000140, 164.312(a)(2)(ii), 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7, 10.5.1, SRG-OS-000047-GPOS-00023, SRG-APP-000098-CTR-000185, SRG-APP-000099-CTR-000190, SRG-APP-000100-CTR-000195, SRG-APP-000100-CTR-000200, SRG-APP-000109-CTR-000215, SRG-APP-000290-CTR-000670, SRG-APP-000357-CTR-000800, RHEL-09-653055, SV-258160r926467_rule

Description
The default action to take when the logs reach their maximum size is to rotate the log files, discarding the oldest one. To configure the action taken by auditd, add or correct the line in /etc/audit/auditd.conf:
max_log_file_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • ignore
  • syslog
  • suspend
  • rotate
  • keep_logs
Set the ACTION to rotate to ensure log rotation occurs. This is the default. The setting is case-insensitive.
Rationale
Automatically rotating logs (by setting this to rotate) minimizes the chances of the system unexpectedly running out of disk space by being overwhelmed with log data. However, for systems that must never discard log data, or which use external processes to transfer it and reclaim space, keep_logs can be employed.
OVAL test results details

admin space left action   oval:ssg-test_auditd_data_retention_max_log_file_action_stig_rotate:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.confmax_log_file_action = ROTATE

admin space left action   oval:ssg-test_auditd_data_retention_max_log_file_action_stig_single:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confmax_log_file_action = ROTATE
Configure auditd space_left Action on Low Disk Spacexccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_action mediumCCE-83703-9

Configure auditd space_left Action on Low Disk Space

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_action
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_space_left_action:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83703-9

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, 3.3.1, CCI-001855, 164.312(a)(2)(ii), 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7, 10.5.1, SRG-OS-000343-GPOS-00134, RHEL-09-653040, 4.1.2.3, SV-258157r926458_rule

Description
The auditd service can be configured to take an action when disk space starts to run low. Edit the file /etc/audit/auditd.conf. Modify the following line, substituting ACTION appropriately:
space_left_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • syslog
  • email
  • exec
  • suspend
  • single
  • halt
Set this to email (instead of the default, which is suspend) as it is more likely to get prompt attention. Acceptable values also include suspend, single, and halt.
Rationale
Notifying administrators of an impending disk space problem may allow them to take corrective action prior to any disruption.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_space_left_action='email'


#
# If space_left_action present in /etc/audit/auditd.conf, change value
# to var_auditd_space_left_action, else
# add "space_left_action = $var_auditd_space_left_action" to /etc/audit/auditd.conf
#

AUDITCONFIG=/etc/audit/auditd.conf

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^space_left_action")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_auditd_space_left_action"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^space_left_action\\>" "$AUDITCONFIG"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^space_left_action\\>.*/$escaped_formatted_output/gi" "$AUDITCONFIG"
else
    if [[ -s "$AUDITCONFIG" ]] && [[ -n "$(tail -c 1 -- "$AUDITCONFIG" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "$AUDITCONFIG"
    fi
    cce="CCE-83703-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "$AUDITCONFIG" >> "$AUDITCONFIG"
    printf '%s\n' "$formatted_output" >> "$AUDITCONFIG"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83703-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-653040
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - auditd_data_retention_space_left_action
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_space_left_action # promote to variable
  set_fact:
    var_auditd_space_left_action: !!str email
  tags:
    - always

- name: Configure auditd space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: space_left_action = {{ var_auditd_space_left_action }}
    regexp: ^\s*space_left_action\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83703-9
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-653040
  - NIST-800-171-3.3.1
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - PCI-DSSv4-10.5.1
  - auditd_data_retention_space_left_action
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20%7B%7B.var_auditd_flush%7D%7D%0Afreq%20%3D%2050%0Amax_log_file%20%3D%20%7B%7B.var_auditd_max_log_file%7D%7D%0Anum_logs%20%3D%20%7B%7B.var_auditd_num_logs%7D%7D%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20%7B%7B.var_auditd_max_log_file_action%7D%7D%0Aspace_left%20%3D%20%7B%7B.var_auditd_space_left%7D%7D%0Aspace_left_action%20%3D%20%7B%7B.var_auditd_space_left_action%7D%7D%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20%7B%7B.var_auditd_action_mail_acct%7D%7D%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20%7B%7B.var_auditd_disk_full_action%7D%7D%0Adisk_error_action%20%3D%20%7B%7B.var_auditd_disk_error_action%7D%7D%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d }}
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true
OVAL test results details

space left action  oval:ssg-test_auditd_data_retention_space_left_action:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confspace_left_action = SYSLOG
Configure auditd space_left on Low Disk Spacexccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_percentage mediumCCE-87746-4

Configure auditd space_left on Low Disk Space

Rule IDxccdf_org.ssgproject.content_rule_auditd_data_retention_space_left_percentage
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_data_retention_space_left_percentage:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87746-4

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, APO11.04, APO12.06, APO13.01, BAI03.05, BAI04.04, BAI08.02, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.04, DSS05.07, MEA02.01, CCI-001855, 4.2.3.10, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.16.1.4, A.16.1.5, A.16.1.7, A.17.2.1, AU-5(b), AU-5(2), AU-5(1), AU-5(4), CM-6(a), DE.AE-3, DE.AE-5, PR.DS-4, PR.PT-1, RS.AN-1, RS.AN-4, Req-10.7, SRG-OS-000343-GPOS-00134, RHEL-09-653035, SV-258156r926455_rule

Description
The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting PERCENTAGE appropriately:
space_left = PERCENTAGE%
Set this value to at least 25 to cause the system to notify the user of an issue.
Rationale
Notifying administrators of an impending disk space problem may allow them to take corrective action prior to any disruption.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_space_left_percentage='25'


grep -q "^space_left[[:space:]]*=.*$" /etc/audit/auditd.conf && \
  sed -i "s/^space_left[[:space:]]*=.*$/space_left = $var_auditd_space_left_percentage%/g" /etc/audit/auditd.conf || \
  echo "space_left = $var_auditd_space_left_percentage%" >> /etc/audit/auditd.conf

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-87746-4
  - DISA-STIG-RHEL-09-653035
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - auditd_data_retention_space_left_percentage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_space_left_percentage # promote to variable
  set_fact:
    var_auditd_space_left_percentage: !!str 25
  tags:
    - always

- name: Configure auditd space_left on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: space_left = {{ var_auditd_space_left_percentage }}%
    regexp: ^\s*space_left\s*=\s*.*$
    state: present
    create: true
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87746-4
  - DISA-STIG-RHEL-09-653035
  - NIST-800-53-AU-5(1)
  - NIST-800-53-AU-5(2)
  - NIST-800-53-AU-5(4)
  - NIST-800-53-AU-5(b)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.7
  - auditd_data_retention_space_left_percentage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
OVAL test results details

admin space left action   oval:ssg-test_auditd_data_retention_space_left_percentage:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_auditd_data_retention_space_left_percentage:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/audit/auditd.conf^[\s]*space_left[\s]+=[\s]+(\d+)%[\s]*$1
Set number of records to cause an explicit flush to audit logsxccdf_org.ssgproject.content_rule_auditd_freq mediumCCE-83704-7

Set number of records to cause an explicit flush to audit logs

Rule IDxccdf_org.ssgproject.content_rule_auditd_freq
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_freq:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83704-7

References:  CM-6, FAU_GEN.1, SRG-OS-000051-GPOS-00024, RHEL-09-653095, SV-258168r926491_rule

Description
To configure Audit daemon to issue an explicit flush to disk command after writing 100 records, set freq to 100 in /etc/audit/auditd.conf.
Rationale
If option freq isn't set to 100, the flush to disk may happen after higher number of records, increasing the danger of audit loss.
OVAL test results details

tests the value of freq setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_freq:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.conffreq = 50
Include Local Events in Audit Logsxccdf_org.ssgproject.content_rule_auditd_local_events mediumCCE-83682-5

Include Local Events in Audit Logs

Rule IDxccdf_org.ssgproject.content_rule_auditd_local_events
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_local_events:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83682-5

References:  CCI-000366, CM-6, FAU_GEN.1, SRG-OS-000062-GPOS-00031, SRG-OS-000480-GPOS-00227, RHEL-09-653075, SV-258164r926479_rule

Description
To configure Audit daemon to include local events in Audit logs, set local_events to yes in /etc/audit/auditd.conf. This is the default setting.
Rationale
If option local_events isn't set to yes only events from network will be aggregated.
OVAL test results details

tests the value of local_events setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_local_events:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflocal_events = yes
Resolve information before writing to audit logsxccdf_org.ssgproject.content_rule_auditd_log_format lowCCE-83696-5

Resolve information before writing to audit logs

Rule IDxccdf_org.ssgproject.content_rule_auditd_log_format
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_log_format:def:1
Time2024-01-08T16:20:29+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83696-5

References:  CCI-000366, CM-6, AU-3, FAU_GEN.1.2, SRG-OS-000255-GPOS-00096, SRG-OS-000480-GPOS-00227, RHEL-09-653100, SV-258169r926494_rule

Description
To configure Audit daemon to resolve all uid, gid, syscall, architecture, and socket address information before writing the events to disk, set log_format to ENRICHED in /etc/audit/auditd.conf.
Rationale
If option log_format isn't set to ENRICHED, the audit records will be stored in a format exactly as the kernel sends them.
OVAL test results details

tests the value of log_format setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_log_format:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.conflog_format = ENRICHED
Set type of computer node name logging in audit logsxccdf_org.ssgproject.content_rule_auditd_name_format mediumCCE-83686-6

Set type of computer node name logging in audit logs

Rule IDxccdf_org.ssgproject.content_rule_auditd_name_format
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_name_format:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83686-6

References:  CCI-001851, CM-6, AU-3, FAU_GEN.1.2, SRG-OS-000039-GPOS-00017, SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224, RHEL-09-653060, SV-258161r926470_rule

Description
To configure Audit daemon to use a unique identifier as computer node name in the audit events, set name_format to hostname|fqd|numeric in /etc/audit/auditd.conf.
Rationale
If option name_format is left at its default value of none, audit events from different computers may be hard to distinguish.
Warnings
warning  Whenever the variable
var_auditd_name_format
uses a multiple value option, for example
A|B|C
, the first value will be used when remediating this rule.

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

var_auditd_name_format='hostname|fqd|numeric'


var_auditd_name_format="$(echo $var_auditd_name_format | cut -d \| -f 1)"

if [ -e "/etc/audit/auditd.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*name_format\s*=\s*/Id" "/etc/audit/auditd.conf"
else
    touch "/etc/audit/auditd.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/audit/auditd.conf"

cp "/etc/audit/auditd.conf" "/etc/audit/auditd.conf.bak"
# Insert at the end of the file
printf '%s\n' "name_format = $var_auditd_name_format" >> "/etc/audit/auditd.conf"
# Clean up after ourselves.
rm "/etc/audit/auditd.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83686-6
  - DISA-STIG-RHEL-09-653060
  - NIST-800-53-AU-3
  - NIST-800-53-CM-6
  - auditd_name_format
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_auditd_name_format # promote to variable
  set_fact:
    var_auditd_name_format: !!str hostname|fqd|numeric
  tags:
    - always

- name: Set type of computer node name logging in audit logs - Define Value to Be
    Used in the Remediation
  ansible.builtin.set_fact: auditd_name_format_split="{{ var_auditd_name_format.split('|')[0]
    }}"
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83686-6
  - DISA-STIG-RHEL-09-653060
  - NIST-800-53-AU-3
  - NIST-800-53-CM-6
  - auditd_name_format
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set type of computer node name logging in audit logs
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/audit/auditd.conf
      create: false
      regexp: (?i)^\s*name_format\s*=\s*
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/audit/auditd.conf
    lineinfile:
      path: /etc/audit/auditd.conf
      create: false
      regexp: (?i)^\s*name_format\s*=\s*
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/audit/auditd.conf
    lineinfile:
      path: /etc/audit/auditd.conf
      create: true
      regexp: (?i)^\s*name_format\s*=\s*
      line: name_format = {{ auditd_name_format_split }}
      state: present
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83686-6
  - DISA-STIG-RHEL-09-653060
  - NIST-800-53-AU-3
  - NIST-800-53-CM-6
  - auditd_name_format
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20%7B%7B.var_auditd_flush%7D%7D%0Afreq%20%3D%2050%0Amax_log_file%20%3D%20%7B%7B.var_auditd_max_log_file%7D%7D%0Anum_logs%20%3D%20%7B%7B.var_auditd_num_logs%7D%7D%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20%7B%7B.var_auditd_max_log_file_action%7D%7D%0Aspace_left%20%3D%20%7B%7B.var_auditd_space_left%7D%7D%0Aspace_left_action%20%3D%20%7B%7B.var_auditd_space_left_action%7D%7D%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20%7B%7B.var_auditd_action_mail_acct%7D%7D%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20%7B%7B.var_auditd_disk_full_action%7D%7D%0Adisk_error_action%20%3D%20%7B%7B.var_auditd_disk_error_action%7D%7D%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d }}
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true
OVAL test results details

tests the value of name_format setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_name_format:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confname_format = NONE
Appropriate Action Must be Setup When the Internal Audit Event Queue is Fullxccdf_org.ssgproject.content_rule_auditd_overflow_action mediumCCE-87901-5

Appropriate Action Must be Setup When the Internal Audit Event Queue is Full

Rule IDxccdf_org.ssgproject.content_rule_auditd_overflow_action
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_overflow_action:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87901-5

References:  CCI-001851, AU-4(1), SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224, RHEL-09-653065, SV-258162r926473_rule

Description
The audit system should have an action setup in the event the internal event queue becomes full. To setup an overflow action edit /etc/audit/auditd.conf. Set overflow_action to one of the following values: syslog, single, halt.
Rationale
The audit system should have an action setup in the event the internal event queue becomes full so that no data is lost.
OVAL test results details

tests the value of overflow_action setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_overflow_action:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.confoverflow_action = SYSLOG
Write Audit Logs to the Diskxccdf_org.ssgproject.content_rule_auditd_write_logs mediumCCE-83705-4

Write Audit Logs to the Disk

Rule IDxccdf_org.ssgproject.content_rule_auditd_write_logs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-auditd_write_logs:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83705-4

References:  CM-6, FAU_STG.1, SRG-OS-000480-GPOS-00227, RHEL-09-653105, SV-258170r926497_rule

Description
To configure Audit daemon to write Audit logs to the disk, set write_logs to yes in /etc/audit/auditd.conf. This is the default setting.
Rationale
If write_logs isn't set to yes, the Audit logs will not be written to the disk.
OVAL test results details

tests the value of write_logs setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_write_logs:tst:1  true

Following items have been found on the system:
PathContent
/etc/audit/auditd.confwrite_logs = yes

tests the absence of write_logs setting in the /etc/audit/auditd.conf file  oval:ssg-test_auditd_write_logs_default_not_overriden:tst:1  false

Following items have been found on the system:
PathContent
/etc/audit/auditd.confwrite_logs =
Install audispd-plugins Packagexccdf_org.ssgproject.content_rule_package_audispd-plugins_installed mediumCCE-83648-6

Install audispd-plugins Package

Rule IDxccdf_org.ssgproject.content_rule_package_audispd-plugins_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_audispd-plugins_installed:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83648-6

References:  FMT_SMF_EXT.1, SRG-OS-000342-GPOS-00133, RHEL-09-653130, SV-258175r926512_rule

Description
The audispd-plugins package can be installed with the following command:
$ sudo dnf install audispd-plugins
Rationale
audispd-plugins provides plugins for the real-time interface to the audit subsystem, audispd. These plugins can do things like relay events to remote machines or analyze events for suspicious behavior.
OVAL test results details

package audispd-plugins is installed  oval:ssg-test_package_audispd-plugins_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
audispd-pluginsx86_64(none)104.el93.0.70:3.0.7-104.el9199e2f91fd431d51audispd-plugins-0:3.0.7-104.el9.x86_64
Ensure the audit Subsystem is Installedxccdf_org.ssgproject.content_rule_package_audit_installed mediumCCE-83649-4

Ensure the audit Subsystem is Installed

Rule IDxccdf_org.ssgproject.content_rule_package_audit_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_audit_installed:def:1
Time2024-01-08T16:20:28+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83649-4

References:  BP28(R50), CCI-000130, CCI-000131, CCI-000132, CCI-000133, CCI-000134, CCI-000135, CCI-000154, CCI-000158, CCI-000172, CCI-001464, CCI-001487, CCI-001814, CCI-001875, CCI-001876, CCI-001877, CCI-001878, CCI-001879, CCI-001880, CCI-001881, CCI-001882, CCI-001889, CCI-001914, CCI-002884, CCI-000169, CIP-004-6 R3.3, CIP-007-3 R6.5, AC-7(a), AU-7(1), AU-7(2), AU-14, AU-12(2), AU-2(a), CM-6(a), FAU_GEN.1, Req-10.1, 10.2.1, SRG-OS-000062-GPOS-00031, SRG-OS-000037-GPOS-00015, SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000054-GPOS-00025, SRG-OS-000122-GPOS-00063, SRG-OS-000254-GPOS-00095, SRG-OS-000255-GPOS-00096, SRG-OS-000337-GPOS-00129, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000353-GPOS-00141, SRG-OS-000354-GPOS-00142, SRG-OS-000358-GPOS-00145, SRG-OS-000365-GPOS-00152, SRG-OS-000392-GPOS-00172, SRG-OS-000475-GPOS-00220, RHEL-09-653010, 4.1.1.1, SV-258151r926440_rule

Description
The audit package should be installed.
Rationale
The auditd service is an access monitoring and accounting daemon, watching system calls to audit any access, in comparison with potential local access control policy such as SELinux policy.
OVAL test results details

package audit is installed  oval:ssg-test_package_audit_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
auditx86_64(none)104.el93.0.70:3.0.7-104.el9199e2f91fd431d51audit-0:3.0.7-104.el9.x86_64
Enable auditd Servicexccdf_org.ssgproject.content_rule_service_auditd_enabled mediumCCE-90829-3

Enable auditd Service

Rule IDxccdf_org.ssgproject.content_rule_service_auditd_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_auditd_enabled:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90829-3

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.3.1, 3.3.2, 3.3.6, CCI-000126, CCI-000130, CCI-000131, CCI-000132, CCI-000133, CCI-000134, CCI-000135, CCI-000154, CCI-000158, CCI-000172, CCI-000366, CCI-001464, CCI-001487, CCI-001814, CCI-001875, CCI-001876, CCI-001877, CCI-002884, CCI-001878, CCI-001879, CCI-001880, CCI-001881, CCI-001882, CCI-001889, CCI-001914, CCI-000169, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(C), 164.310(a)(2)(iv), 164.310(d)(2)(iii), 164.312(b), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, CIP-004-6 R3.3, CIP-007-3 R6.5, AC-2(g), AU-3, AU-10, AU-2(d), AU-12(c), AU-14(1), AC-6(9), CM-6(a), SI-4(23), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1, Req-10.1, 10.2.1, SRG-OS-000062-GPOS-00031, SRG-OS-000037-GPOS-00015, SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000054-GPOS-00025, SRG-OS-000122-GPOS-00063, SRG-OS-000254-GPOS-00095, SRG-OS-000255-GPOS-00096, SRG-OS-000337-GPOS-00129, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000353-GPOS-00141, SRG-OS-000354-GPOS-00142, SRG-OS-000358-GPOS-00145, SRG-OS-000365-GPOS-00152, SRG-OS-000392-GPOS-00172, SRG-OS-000475-GPOS-00220, RHEL-09-653015, 4.1.1.4, SV-258152r926443_rule

Description
The auditd service is an essential userspace component of the Linux Auditing System, as it is responsible for writing audit records to disk. The auditd service can be enabled with the following command:
$ sudo systemctl enable auditd.service
Rationale
Without establishing what type of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Ensuring the auditd service is active ensures audit records generated by the kernel are appropriately recorded.

Additionally, a properly configured audit subsystem ensures that actions of individual system users can be uniquely traced to those users so they can be held accountable for their actions.
OVAL test results details

package audit is installed  oval:ssg-test_service_auditd_package_audit_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
auditx86_64(none)104.el93.0.70:3.0.7-104.el9199e2f91fd431d51audit-0:3.0.7-104.el9.x86_64

Test that the auditd service is running  oval:ssg-test_service_running_auditd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
auditd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_auditd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_auditd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Enable Auditing for Processes Which Start Prior to the Audit Daemonxccdf_org.ssgproject.content_rule_grub2_audit_argument lowCCE-83651-0

Enable Auditing for Processes Which Start Prior to the Audit Daemon

Rule IDxccdf_org.ssgproject.content_rule_grub2_audit_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_audit_argument:def:1
Time2024-01-08T16:20:29+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83651-0

References:  1, 11, 12, 13, 14, 15, 16, 19, 3, 4, 5, 6, 7, 8, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS05.02, DSS05.03, DSS05.04, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.3.1, CCI-001464, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(C), 164.310(a)(2)(iv), 164.310(d)(2)(iii), 164.312(b), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AC-17(1), AU-14(1), AU-10, CM-6(a), IR-5(1), DE.AE-3, DE.AE-5, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1, Req-10.3, 10.7, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000473-GPOS-00218, SRG-OS-000254-GPOS-00095, RHEL-09-212055, 4.1.1.2, SV-257796r925375_rule

Description
To ensure all processes can be audited, even those which start prior to the audit daemon, add the argument audit=1 to the default GRUB 2 command line for the Linux operating system. To ensure that audit=1 is added as a kernel command line argument to newly installed kernels, add audit=1 to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... audit=1 ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="audit=1"
Rationale
Each process on the system carries an "auditable" flag which indicates whether its activities can be audited. Although auditd takes care of enabling this for all processes which launch after it does, adding the kernel argument ensures it is set for every process during boot.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q grub2-common; }; then

grubby --update-kernel=ALL --args=audit=1

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83651-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-212055
  - NIST-800-171-3.3.1
  - NIST-800-53-AC-17(1)
  - NIST-800-53-AU-10
  - NIST-800-53-AU-14(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IR-5(1)
  - PCI-DSS-Req-10.3
  - PCI-DSSv4-10.7
  - grub2_audit_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="audit=1"
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CCE-83651-0
  - CJIS-5.4.1.1
  - DISA-STIG-RHEL-09-212055
  - NIST-800-171-3.3.1
  - NIST-800-53-AC-17(1)
  - NIST-800-53-AU-10
  - NIST-800-53-AU-14(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IR-5(1)
  - PCI-DSS-Req-10.3
  - PCI-DSSv4-10.7
  - grub2_audit_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "audit=1"
OVAL test results details

check kernel command line parameters for audit=1 for all boot entries.  oval:ssg-test_grub2_audit_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for audit=1 in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_audit_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for audit=1 in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_audit_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_audit_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Extend Audit Backlog Limit for the Audit Daemonxccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument lowCCE-83652-8

Extend Audit Backlog Limit for the Audit Daemon

Rule IDxccdf_org.ssgproject.content_rule_grub2_audit_backlog_limit_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_audit_backlog_limit_argument:def:1
Time2024-01-08T16:20:29+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83652-8

References:  CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-001849, CCI-002884, CM-6(a), FAU_STG.1, FAU_STG.3, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000254-GPOS-00095, SRG-OS-000341-GPOS-00132, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-09-653120, 4.1.1.3, SV-258173r926506_rule

Description
To improve the kernel capacity to queue all log events, even those which occurred prior to the audit daemon, add the argument audit_backlog_limit=8192 to the default GRUB 2 command line for the Linux operating system. To ensure that audit_backlog_limit=8192 is added as a kernel command line argument to newly installed kernels, add audit_backlog_limit=8192 to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... audit_backlog_limit=8192 ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="audit_backlog_limit=8192"
Rationale
audit_backlog_limit sets the queue length for audit events awaiting transfer to the audit daemon. Until the audit daemon is up and running, all log messages are stored in this queue. If the queue is overrun during boot process, the action defined by audit failure flag is taken.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q grub2-common; }; then

grubby --update-kernel=ALL --args=audit_backlog_limit=8192

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83652-8
  - DISA-STIG-RHEL-09-653120
  - NIST-800-53-CM-6(a)
  - grub2_audit_backlog_limit_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="audit_backlog_limit=8192"
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CCE-83652-8
  - DISA-STIG-RHEL-09-653120
  - NIST-800-53-CM-6(a)
  - grub2_audit_backlog_limit_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "audit_backlog_limit=8192"
OVAL test results details

check kernel command line parameters for audit_backlog_limit=8192 for all boot entries.  oval:ssg-test_grub2_audit_backlog_limit_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for audit_backlog_limit=8192 in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_audit_backlog_limit_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for audit_backlog_limit=8192 in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_audit_backlog_limit_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_audit_backlog_limit_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Verify /boot/grub2/grub.cfg Group Ownershipxccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg mediumCCE-83848-2

Verify /boot/grub2/grub.cfg Group Ownership

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_grub2_cfg
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_grub2_cfg:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83848-2

References:  A.6.SEC-RHEL2, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-7.1, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-212025, 1.4.2, SV-257790r925357_rule

Description
The file /boot/grub2/grub.cfg should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of /boot/grub2/grub.cfg, run the command:
$ sudo chgrp root /boot/grub2/grub.cfg
Rationale
The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.
OVAL test results details

Testing group ownership of /boot/grub2/grub.cfg  oval:ssg-test_file_groupowner_grub2_cfg_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_grub2_cfg_0:obj:1 of type file_object
FilepathFilterFilter
/boot/grub2/grub.cfgoval:ssg-symlink_file_groupowner_grub2_cfg_uid_0:ste:1oval:ssg-state_file_groupowner_grub2_cfg_gid_0_0:ste:1
Verify /boot/grub2/grub.cfg User Ownershipxccdf_org.ssgproject.content_rule_file_owner_grub2_cfg mediumCCE-83845-8

Verify /boot/grub2/grub.cfg User Ownership

Rule IDxccdf_org.ssgproject.content_rule_file_owner_grub2_cfg
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_grub2_cfg:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83845-8

References:  A.6.SEC-RHEL2, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-7.1, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-212030, 1.4.2, SV-257791r925360_rule

Description
The file /boot/grub2/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /boot/grub2/grub.cfg, run the command:
$ sudo chown root /boot/grub2/grub.cfg 
Rationale
Only root should be able to modify important boot parameters.
OVAL test results details

Testing user ownership of /boot/grub2/grub.cfg  oval:ssg-test_file_owner_grub2_cfg_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_grub2_cfg_0:obj:1 of type file_object
FilepathFilterFilter
/boot/grub2/grub.cfgoval:ssg-symlink_file_owner_grub2_cfg_uid_0:ste:1oval:ssg-state_file_owner_grub2_cfg_uid_0_0:ste:1
Set the Boot Loader Admin Username to a Non-Default Valuexccdf_org.ssgproject.content_rule_grub2_admin_username highCCE-87370-3

Set the Boot Loader Admin Username to a Non-Default Value

Rule IDxccdf_org.ssgproject.content_rule_grub2_admin_username
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_admin_username:def:1
Time2024-01-08T16:20:29+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-87370-3

References:  BP28(R17), 1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-09-212020, SV-257789r925354_rule

Description
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

To maximize the protection, select a password-protected superuser account with unique name, and modify the /etc/grub.d/01_users configuration file to reflect the account name change.

Do not to use common administrator account names like root, admin, or administrator for the grub2 superuser account.

Change the superuser to a different username (The default is 'root').
$ sed -i 's/\(set superusers=\).*/\1"<unique user ID>"/g' /etc/grub.d/01_users


Once the superuser account has been added, update the grub.cfg file by running:
grubby --update-kernel=ALL
Rationale
Having a non-default grub superuser username makes password-guessing attacks less effective.
Warnings
warning  To prevent hard-coded admin usernames, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
OVAL test results details

superuser is defined in /boot/grub2/grub.cfg. Superuser is not equal to other system account nor root, admin, administrator  oval:ssg-test_bootloader_superuser_differ_from_other_users:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_bootloader_unique_superuser:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/boot/grub2/grub.cfg^[\s]*set[\s]+superusers="(?i)\b(?!(?:root|admin|administrator)\b)(\w+)"$1
Set Boot Loader Password in grub2xccdf_org.ssgproject.content_rule_grub2_password highCCE-83849-0

Set Boot Loader Password in grub2

Rule IDxccdf_org.ssgproject.content_rule_grub2_password
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_password:def:1
Time2024-01-08T16:20:29+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-83849-0

References:  BP28(R17), A.8.SEC-RHEL7, 1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, RHEL-09-212010, 1.4.1, SV-257787r925348_rule

Description
The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command:
# grub2-setpassword
When prompted, enter the password that was selected.

Rationale
Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.
Warnings
warning  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
OVAL test results details

make sure a password is defined in /boot/grub2/user.cfg  oval:ssg-test_grub2_password_usercfg:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_password_usercfg:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/boot/grub2/user.cfg^[\s]*GRUB2_PASSWORD=grub\.pbkdf2\.sha512.*$1

make sure a password is defined in /boot/grub2/grub.cfg  oval:ssg-test_grub2_password_grubcfg:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_password_grubcfg:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/boot/grub2/grub.cfg^[\s]*password_pbkdf2[\s]+.*[\s]+grub\.pbkdf2\.sha512.*$1

superuser is defined in /boot/grub2/grub.cfg files.  oval:ssg-test_bootloader_superuser:tst:1  true

Following items have been found on the system:
PathContent
/boot/grub2/grub.cfg set superusers="root"
Enable Kernel Page-Table Isolation (KPTI)xccdf_org.ssgproject.content_rule_grub2_pti_argument lowCCE-83843-3

Enable Kernel Page-Table Isolation (KPTI)

Rule IDxccdf_org.ssgproject.content_rule_grub2_pti_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_pti_argument:def:1
Time2024-01-08T16:20:29+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83843-3

References:  BP28(R8), CCI-000381, SI-16, SRG-OS-000433-GPOS-00193, SRG-OS-000095-GPOS-00049, RHEL-09-212050, SV-257795r925372_rule

Description
To enable Kernel page-table isolation, add the argument pti=on to the default GRUB 2 command line for the Linux operating system. To ensure that pti=on is added as a kernel command line argument to newly installed kernels, add pti=on to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... pti=on ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="pti=on"
Rationale
Kernel page-table isolation is a kernel feature that mitigates the Meltdown security vulnerability and hardens the kernel against attempts to bypass kernel address space layout randomization (KASLR).

# Remediation is applicable only in certain platforms
if rpm --quiet -q grub2-common && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

grubby --update-kernel=ALL --args=pti=on

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83843-3
  - DISA-STIG-RHEL-09-212050
  - NIST-800-53-SI-16
  - grub2_pti_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="pti=on"
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83843-3
  - DISA-STIG-RHEL-09-212050
  - NIST-800-53-SI-16
  - grub2_pti_argument
  - low_disruption
  - low_severity
  - medium_complexity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "pti=on"
OVAL test results details

check kernel command line parameters for pti=on for all boot entries.  oval:ssg-test_grub2_pti_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for pti=on in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_pti_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for pti=on in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_pti_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_pti_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Disable vsyscallsxccdf_org.ssgproject.content_rule_grub2_vsyscall_argument mediumCCE-83842-5

Disable vsyscalls

Rule IDxccdf_org.ssgproject.content_rule_grub2_vsyscall_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_vsyscall_argument:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83842-5

References:  CCI-001084, CM-7(a), FPT_ASLR_EXT.1, SRG-OS-000480-GPOS-00227, SRG-OS-000134-GPOS-00068, RHEL-09-212035, SV-257792r925363_rule

Description
To disable use of virtual syscalls, add the argument vsyscall=none to the default GRUB 2 command line for the Linux operating system. To ensure that vsyscall=none is added as a kernel command line argument to newly installed kernels, add vsyscall=none to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... vsyscall=none ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="vsyscall=none"
Rationale
Virtual Syscalls provide an opportunity of attack for a user who has control of the return instruction pointer.

# Remediation is applicable only in certain platforms
if rpm --quiet -q grub2-common && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

grubby --update-kernel=ALL --args=vsyscall=none

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83842-5
  - DISA-STIG-RHEL-09-212035
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="vsyscall=none"
  when:
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83842-5
  - DISA-STIG-RHEL-09-212035
  - NIST-800-53-CM-7(a)
  - grub2_vsyscall_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "vsyscall=none"
OVAL test results details

check kernel command line parameters for vsyscall=none for all boot entries.  oval:ssg-test_grub2_vsyscall_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for vsyscall=none in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_vsyscall_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for vsyscall=none in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_vsyscall_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_vsyscall_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Ensure cron Is Logging To Rsyslogxccdf_org.ssgproject.content_rule_rsyslog_cron_logging mediumCCE-83994-4

Ensure cron Is Logging To Rsyslog

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_cron_logging
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_cron_logging:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83994-4

References:  1, 14, 15, 16, 3, 5, 6, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, CCI-000366, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, 0988, 1405, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.15.2.1, A.15.2.2, CM-6(a), ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000480-GPOS-00227, RHEL-09-652060, SV-258150r926437_rule

Description
Cron logging must be implemented to spot intrusions or trace cron job status. If cron is not logging to rsyslog, it can be implemented by adding the following to the RULES section of /etc/rsyslog.conf:
cron.*                                                  /var/log/cron
Rationale
Cron logging can be used to trace the successful or unsuccessful execution of cron jobs. It can also be used to spot intrusions into the use of the cron facility by unauthorized and malicious users.
OVAL test results details

cron is configured in /etc/rsyslog.conf  oval:ssg-test_cron_logging_rsyslog:tst:1  true

Following items have been found on the system:
PathContent
/etc/rsyslog.confcron.* /var/log/cron # Everybody gets emergency messages

cron is configured in /etc/rsyslog.d  oval:ssg-test_cron_logging_rsyslog_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_cron_logging_rsyslog_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/rsyslog.d^.*$^[\s]*cron\.\*[\s]+/var/log/cron\s*(?:#.*)?$1
Ensure Rsyslog Authenticates Off-Loaded Audit Recordsxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_actionsendstreamdriverauthmode mediumCCE-86871-1

Ensure Rsyslog Authenticates Off-Loaded Audit Records

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_actionsendstreamdriverauthmode
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_encrypt_offload_actionsendstreamdriverauthmode:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86871-1

References:  CCI-001851, AU-4(1), SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224, RHEL-09-652040, SV-258146r926425_rule

Description
Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to support both local and remote logging. Couple this utility with gnutls (which is a secure communications library implementing the SSL, TLS and DTLS protocols), and you have a method to securely encrypt and off-load auditing. When using rsyslogd to off-load logs the remote system must be authenticated.
Rationale
The audit records generated by Rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Audit records should be protected from unauthorized access.

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sed -i '/^.*\$ActionSendStreamDriverAuthMode.*/d' /etc/rsyslog.conf /etc/rsyslog.d/*.conf 2> /dev/null

if [ -e "/etc/rsyslog.d/stream_driver_auth.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*\$ActionSendStreamDriverAuthMode /Id" "/etc/rsyslog.d/stream_driver_auth.conf"
else
    touch "/etc/rsyslog.d/stream_driver_auth.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/rsyslog.d/stream_driver_auth.conf"

cp "/etc/rsyslog.d/stream_driver_auth.conf" "/etc/rsyslog.d/stream_driver_auth.conf.bak"
# Insert at the end of the file
printf '%s\n' "\$ActionSendStreamDriverAuthMode x509/name" >> "/etc/rsyslog.d/stream_driver_auth.conf"
# Clean up after ourselves.
rm "/etc/rsyslog.d/stream_driver_auth.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Ensure Rsyslog Authenticates Off-Loaded Audit Records
  block:

  - name: Deduplicate values from /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: false
      regexp: ^\s*{{ "$ActionSendStreamDriverAuthMode"| regex_escape }}\s
      state: absent

  - name: Check if /etc/rsyslog.d exists
    stat:
      path: /etc/rsyslog.d
    register: _etc_rsyslog_d_exists

  - name: Check if the parameter $ActionSendStreamDriverAuthMode is present in /etc/rsyslog.d
    find:
      paths: /etc/rsyslog.d
      recurse: 'yes'
      follow: 'no'
      contains: ^\s*{{ "$ActionSendStreamDriverAuthMode"| regex_escape }}\s
    register: _etc_rsyslog_d_has_parameter
    when: _etc_rsyslog_d_exists.stat.isdir is defined and _etc_rsyslog_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/rsyslog.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: ^\s*{{ "$ActionSendStreamDriverAuthMode"| regex_escape }}\s
      state: absent
    with_items: '{{ _etc_rsyslog_d_has_parameter.files }}'
    when: _etc_rsyslog_d_has_parameter.matched

  - name: Insert correct line to /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: true
      regexp: ^\s*{{ "$ActionSendStreamDriverAuthMode"| regex_escape }}\s
      line: $ActionSendStreamDriverAuthMode x509/name
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86871-1
  - DISA-STIG-RHEL-09-652040
  - NIST-800-53-AU-4(1)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_encrypt_offload_actionsendstreamdriverauthmode
OVAL test results details

Check if $ActionSendStreamDriverAuthMode x509/name is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_actionsendstreamdriverauthmode_action_send_stream_driver_auth_mode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_actionsendstreamdriverauthmode_action_send_stream_driver_auth_mode:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/rsyslog.conf^\$ActionSendStreamDriverAuthMode x509/name$1

Check if $ActionSendStreamDriverAuthMode x509/name is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_actionsendstreamdriverauthmode_action_send_stream_driver_auth_mode_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_actionsendstreamdriverauthmode_action_send_stream_driver_auth_mode_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/rsyslog.d^.*conf$^\$ActionSendStreamDriverAuthMode x509/name$1
Ensure Rsyslog Encrypts Off-Loaded Audit Recordsxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_actionsendstreamdrivermode mediumCCE-90191-8

Ensure Rsyslog Encrypts Off-Loaded Audit Records

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_actionsendstreamdrivermode
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_encrypt_offload_actionsendstreamdrivermode:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90191-8

References:  CCI-001851, AU-4(1), SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224, RHEL-09-652045, SV-258147r926428_rule

Description
Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to support both local and remote logging. Couple this utility with gnutls (which is a secure communications library implementing the SSL, TLS and DTLS protocols), and you have a method to securely encrypt and off-load auditing. When using rsyslogd to off-load logs off a encrpytion system must be used.
Rationale
The audit records generated by Rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Audit records should be protected from unauthorized access.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/rsyslog.d/encrypt.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*\$ActionSendStreamDriverMode /Id" "/etc/rsyslog.d/encrypt.conf"
else
    touch "/etc/rsyslog.d/encrypt.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/rsyslog.d/encrypt.conf"

cp "/etc/rsyslog.d/encrypt.conf" "/etc/rsyslog.d/encrypt.conf.bak"
# Insert at the end of the file
printf '%s\n' "\$ActionSendStreamDriverMode 1" >> "/etc/rsyslog.d/encrypt.conf"
# Clean up after ourselves.
rm "/etc/rsyslog.d/encrypt.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Ensure Rsyslog Encrypts Off-Loaded Audit Records
  block:

  - name: Deduplicate values from /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: false
      regexp: '^\s*{{ "$ActionSendStreamDriverMode"| regex_escape }} '
      state: absent

  - name: Check if /etc/rsyslog.d exists
    stat:
      path: /etc/rsyslog.d
    register: _etc_rsyslog_d_exists

  - name: Check if the parameter $ActionSendStreamDriverMode is present in /etc/rsyslog.d
    find:
      paths: /etc/rsyslog.d
      recurse: 'yes'
      follow: 'no'
      contains: '^\s*{{ "$ActionSendStreamDriverMode"| regex_escape }} '
    register: _etc_rsyslog_d_has_parameter
    when: _etc_rsyslog_d_exists.stat.isdir is defined and _etc_rsyslog_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/rsyslog.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: '^\s*{{ "$ActionSendStreamDriverMode"| regex_escape }} '
      state: absent
    with_items: '{{ _etc_rsyslog_d_has_parameter.files }}'
    when: _etc_rsyslog_d_has_parameter.matched

  - name: Insert correct line to /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: true
      regexp: '^\s*{{ "$ActionSendStreamDriverMode"| regex_escape }} '
      line: $ActionSendStreamDriverMode 1
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90191-8
  - DISA-STIG-RHEL-09-652045
  - NIST-800-53-AU-4(1)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_encrypt_offload_actionsendstreamdrivermode
OVAL test results details

Check if $ActionSendStreamDriverMode 1 is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_actionsendstreamdrivermode_action_send_stream_driver_mode_rsyslog:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_actionsendstreamdrivermode_action_send_stream_driver_mode_rsyslog:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/rsyslog.conf^\$ActionSendStreamDriverMode 1$1

Check if $ActionSendStreamDriverMode 1 is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_actionsendstreamdrivermode_action_send_stream_driver_mode_rsyslog_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_actionsendstreamdrivermode_action_send_stream_driver_mode_rsyslog_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/rsyslog.d^.*conf$^\$ActionSendStreamDriverMode 1$1
Ensure Rsyslog Encrypts Off-Loaded Audit Recordsxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_defaultnetstreamdriver mediumCCE-86782-0

Ensure Rsyslog Encrypts Off-Loaded Audit Records

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_encrypt_offload_defaultnetstreamdriver
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_encrypt_offload_defaultnetstreamdriver:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86782-0

References:  CCI-001851, AU-4(1), SRG-OS-000342-GPOS-00133, SRG-OS-000479-GPOS-00224, RHEL-09-652050, SV-258148r926431_rule

Description
Rsyslogd is a system utility providing support for message logging. Support for both internet and UNIX domain sockets enables this utility to support both local and remote logging. Couple this utility with gnutls (which is a secure communications library implementing the SSL, TLS and DTLS protocols), and you have a method to securely encrypt and off-load auditing. When using rsyslogd to off-load logs off an encryption system must be used.
Rationale
The audit records generated by Rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Audit records should be protected from unauthorized access.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/rsyslog.d/encrypt.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*\$DefaultNetstreamDriver /Id" "/etc/rsyslog.d/encrypt.conf"
else
    touch "/etc/rsyslog.d/encrypt.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/rsyslog.d/encrypt.conf"

cp "/etc/rsyslog.d/encrypt.conf" "/etc/rsyslog.d/encrypt.conf.bak"
# Insert at the end of the file
printf '%s\n' "\$DefaultNetstreamDriver gtls" >> "/etc/rsyslog.d/encrypt.conf"
# Clean up after ourselves.
rm "/etc/rsyslog.d/encrypt.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Ensure Rsyslog Encrypts Off-Loaded Audit Records
  block:

  - name: Deduplicate values from /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: false
      regexp: '^\s*{{ "$DefaultNetstreamDriver"| regex_escape }} '
      state: absent

  - name: Check if /etc/rsyslog.d exists
    stat:
      path: /etc/rsyslog.d
    register: _etc_rsyslog_d_exists

  - name: Check if the parameter $DefaultNetstreamDriver is present in /etc/rsyslog.d
    find:
      paths: /etc/rsyslog.d
      recurse: 'yes'
      follow: 'no'
      contains: '^\s*{{ "$DefaultNetstreamDriver"| regex_escape }} '
    register: _etc_rsyslog_d_has_parameter
    when: _etc_rsyslog_d_exists.stat.isdir is defined and _etc_rsyslog_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/rsyslog.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: '^\s*{{ "$DefaultNetstreamDriver"| regex_escape }} '
      state: absent
    with_items: '{{ _etc_rsyslog_d_has_parameter.files }}'
    when: _etc_rsyslog_d_has_parameter.matched

  - name: Insert correct line to /etc/rsyslog.conf
    lineinfile:
      path: /etc/rsyslog.conf
      create: true
      regexp: '^\s*{{ "$DefaultNetstreamDriver"| regex_escape }} '
      line: $DefaultNetstreamDriver gtls
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86782-0
  - DISA-STIG-RHEL-09-652050
  - NIST-800-53-AU-4(1)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_encrypt_offload_defaultnetstreamdriver
OVAL test results details

Check if $DefaultNetstreamDriver gtls is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_defaultnetstreamdriver_default_netstream_rsyslog:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_defaultnetstreamdriver_default_netstream_rsyslog:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/rsyslog.conf^\$DefaultNetstreamDriver gtls$1

Check if $DefaultNetstreamDriver gtls is set in /etc/rsyslog.conf  oval:ssg-test_rsyslog_encrypt_offload_defaultnetstreamdriver_default_netstream_rsyslog_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_rsyslog_encrypt_offload_defaultnetstreamdriver_default_netstream_rsyslog_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/rsyslog.d^.*conf$^\$DefaultNetstreamDriver gtls$1
Ensure remote access methods are monitored in Rsyslogxccdf_org.ssgproject.content_rule_rsyslog_remote_access_monitoring mediumCCE-87960-1

Ensure remote access methods are monitored in Rsyslog

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_remote_access_monitoring
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_remote_access_monitoring:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87960-1

References:  CCI-000067, AC-17(1), SRG-OS-000032-GPOS-00013, RHEL-09-652030, SV-258144r926419_rule

Description
Logging of remote access methods must be implemented to help identify cyber attacks and ensure ongoing compliance with remote access policies are being audited and upheld. An examples of a remote access method is the use of the Remote Desktop Protocol (RDP) from an external, non-organization controlled network. The /etc/rsyslog.conf or /etc/rsyslog.d/*.conf file should contain a match for the following selectors: auth.*, authpriv.*, and daemon.*. If not, use the following as an example configuration:
auth.*;authpriv.*;daemon.*                              /var/log/secure
Rationale
Logging remote access methods can be used to trace the decrease the risks associated with remote user access management. It can also be used to spot cyber attacks and ensure ongoing compliance with organizational policies surrounding the use of remote access methods.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

declare -A REMOTE_METHODS=( ['auth.*']='^[^#]*auth\.\*.*$' ['authpriv.*']='^[^#]*authpriv\.\*.*$' ['daemon.*']='^[^#]*daemon\.\*.*$' )

if [[ ! -f /etc/rsyslog.conf ]]; then
	# Something is not right, create the file
	touch /etc/rsyslog.conf
fi

APPEND_LINE=$(sed -rn '/^\S+\s+\/var\/log\/secure$/p' /etc/rsyslog.conf)

# Loop through the remote methods associative array
for K in "${!REMOTE_METHODS[@]}"
do
	# Check to see if selector/value exists
	if ! grep -rq "${REMOTE_METHODS[$K]}" /etc/rsyslog.*; then
		# Make sure we have a line to insert after, otherwise append to end
		if [[ ! -z ${APPEND_LINE} ]]; then
			# Add selector to file
			sed -r -i "0,/^(\S+\s+\/var\/log\/secure$)/s//\1\n${K} \/var\/log\/secure/" /etc/rsyslog.conf
		else
			echo "${K} /var/log/secure" >> /etc/rsyslog.conf
		fi
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
- name: 'Ensure remote access methods are monitored in Rsyslog: Set facts'
  set_fact:
    conf_files:
    - /etc/rsyslog.conf
    remote_methods:
    - selector: auth.*
      regexp: ^.*auth\.\*.*$
    - selector: authpriv.*
      regexp: ^.*authpriv\.\*.*$
    - selector: daemon.*
      regexp: ^.*daemon\.\*.*$
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring

- name: 'Ensure remote access methods are monitored in Rsyslog: Ensure rsyslog.conf
    exists'
  file:
    path: '{{ conf_files.0 }}'
    state: touch
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring

- name: 'Ensure remote access methods are monitored in Rsyslog: Gather conf.d files'
  find:
    patterns:
    - '*.conf'
    paths:
    - /etc/rsyslog.d
  register: rsyslogd
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring

- name: 'Ensure remote access methods are monitored in Rsyslog: Set conf file(s)'
  set_fact:
    conf_files: '{{ conf_files + [item.path] }}'
  loop: '{{ rsyslogd.files }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslogd.matched > 0
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring

- name: 'Ensure remote access methods are monitored in Rsyslog: Check for existing
    values'
  lineinfile:
    path: '{{ item.1 }}'
    regexp: '{{ item.0.regexp }}'
    state: absent
  check_mode: true
  changed_when: false
  register: remote_method_values
  loop: '{{ remote_methods|product(conf_files)|list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring

- name: 'Ensure remote access methods are monitored in Rsyslog: Configure'
  lineinfile:
    path: /etc/rsyslog.conf
    line: '{{ item.item.0.selector }} /var/log/secure'
    insertafter: ^.*\/var\/log\/secure.*$
    create: true
  loop: '{{ remote_method_values.results }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - item.found == 0
  tags:
  - CCE-87960-1
  - DISA-STIG-RHEL-09-652030
  - NIST-800-53-AC-17(1)
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_remote_access_monitoring
OVAL test results details

remote method auth monitoring configured in rsyslog'  oval:ssg-test_remote_method_monitoring_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_remote_method_monitoring_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/rsyslog\.(conf|d/.+\.conf)$^[^#]*auth\.\*.*$1

remote method authpriv monitoring configured in rsyslog'  oval:ssg-test_remote_method_monitoring_authpriv:tst:1  true

Following items have been found on the system:
PathContent
/etc/rsyslog.confauthpriv.* /var/log/secure

remote method daemon monitoring configured in rsyslog'  oval:ssg-test_remote_method_monitoring_daemon:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_remote_method_monitoring_daemon:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/rsyslog\.(conf|d/.+\.conf)$^[^#]*daemon\.\*.*$1
Enable systemd-journald Servicexccdf_org.ssgproject.content_rule_service_systemd-journald_enabled mediumCCE-85941-3

Enable systemd-journald Service

Rule IDxccdf_org.ssgproject.content_rule_service_systemd-journald_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_systemd-journald_enabled:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85941-3

References:  CCI-001665, SC-24, SRG-OS-000269-GPOS-00103, RHEL-09-211040, 4.2.2.2, SV-257783r925336_rule

Description
The systemd-journald service is an essential component of systemd. The systemd-journald service can be enabled with the following command:
$ sudo systemctl enable systemd-journald.service
Rationale
In the event of a system failure, Red Hat Enterprise Linux 9 must preserve any information necessary to determine cause of failure and any information necessary to return to operations with least disruption to system processes.
OVAL test results details

package systemd is installed  oval:ssg-test_service_systemd-journald_package_systemd_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
systemdx86_64(none)18.el92520:252-18.el9199e2f91fd431d51systemd-0:252-18.el9.x86_64

Test that the systemd-journald service is running  oval:ssg-test_service_running_systemd-journald:tst:1  true

Following items have been found on the system:
UnitPropertyValue
systemd-journald.socketActiveStateactive
systemd-journald.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_systemd-journald:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_systemd-journald_socket:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Serverxccdf_org.ssgproject.content_rule_rsyslog_nolisten mediumCCE-83995-1

Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_nolisten
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_nolisten:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83995-1

References:  1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9, APO01.06, APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, MEA02.01, CCI-000318, CCI-000366, CCI-000368, CCI-001812, CCI-001813, CCI-001814, 4.2.3.4, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.8, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, 0988, 1405, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.IP-1, PR.PT-1, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-652025, 4.2.1.7, SV-258143r926416_rule

Description
The rsyslog daemon should not accept remote messages unless the system acts as a log server. To ensure that it is not listening on the network, ensure any of the following lines are not found in rsyslog configuration files. If using legacy syntax:
$ModLoad imtcp
$InputTCPServerRun port
$ModLoad imudp
$UDPServerRun port
$ModLoad imrelp
$InputRELPServerRun port
If using RainerScript syntax:
module(load="imtcp")
module(load="imudp")
input(type="imtcp" port="514")
input(type="imudp" port="514")
Rationale
Any process which receives messages from the network incurs some risk of receiving malicious messages. This risk can be eliminated for rsyslog by configuring it not to listen on the network.
OVAL test results details

rsyslog configuration files don't contain $InputTCPServerRun | $UDPServerRun | $InputRELPServerRun | $ModLoad imtcp | $ModLoad imudp | $ModLoad imrelp  oval:ssg-test_rsyslog_nolisten_legacy:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_rsyslog_nolisten_legacy:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\/etc\/rsyslog(\.conf|\.d\/.*\.conf)$^[\s]*\$((?:Input(?:TCP|RELP)|UDP)ServerRun|ModLoad[\s]+(imtcp|imudp|imrelp))1

rsyslog configuration files don't use imtcp or imudp modules  oval:ssg-test_rsyslog_nolisten_rainerscript:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_rsyslog_nolisten_rainerscript:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^\/etc\/rsyslog(\.conf|\.d\/.*\.conf)$^\s*(?:module|input)\((?:load|type)="(imtcp|imudp)".*$1
Ensure Logs Sent To Remote Hostxccdf_org.ssgproject.content_rule_rsyslog_remote_loghost mediumCCE-83990-2

Ensure Logs Sent To Remote Host

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_remote_loghost
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-rsyslog_remote_loghost:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83990-2

References:  BP28(R7), NT28(R43), NT12(R5), 1, 13, 14, 15, 16, 2, 3, 5, 6, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.04, DSS05.07, MEA02.01, CCI-000366, CCI-001348, CCI-000136, CCI-001851, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 7.1, SR 7.2, 0988, 1405, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.17.2.1, CIP-003-8 R5.2, CIP-004-6 R3.3, CM-6(a), AU-4(1), AU-9(2), PR.DS-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000479-GPOS-00224, SRG-OS-000480-GPOS-00227, SRG-OS-000342-GPOS-00133, RHEL-09-652055, 4.2.1.6, SV-258149r926434_rule

Description
To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting logcollector appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:
*.* @logcollector

To use TCP for log message delivery:
*.* @@logcollector

To use RELP for log message delivery:
*.* :omrelp:logcollector

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.
Rationale
A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.
Warnings
warning  It is important to configure queues in case the client is sending log messages to a remote server. If queues are not configured, the system will stop functioning when the connection to the remote server is not available. Please consult Rsyslog documentation for more information about configuration of queues. The example configuration which should go into /etc/rsyslog.conf can look like the following lines:
$ActionQueueType LinkedList
$ActionQueueFileName queuefilename
$ActionQueueMaxDiskSpace 1g
$ActionQueueSaveOnShutdown on
$ActionResumeRetryCount -1

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^\*\.\*")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "@@$rsyslog_remote_loghost_address"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*\\>" "/etc/rsyslog.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*\\>.*/$escaped_formatted_output/gi" "/etc/rsyslog.conf"
else
    if [[ -s "/etc/rsyslog.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/rsyslog.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/rsyslog.conf"
    fi
    cce="CCE-83990-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/rsyslog.conf" >> "/etc/rsyslog.conf"
    printf '%s\n' "$formatted_output" >> "/etc/rsyslog.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: !!str logcollector
  tags:
    - always

- name: Set rsyslog remote loghost
  lineinfile:
    dest: /etc/rsyslog.conf
    regexp: ^\*\.\*
    line: '*.* @@{{ rsyslog_remote_loghost_address }}'
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83990-2
  - DISA-STIG-RHEL-09-652055
  - NIST-800-53-AU-4(1)
  - NIST-800-53-AU-9(2)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - rsyslog_remote_loghost
OVAL test results details

Ensures system configured to export logs to remote host  oval:ssg-test_remote_rsyslog_conf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_remote_loghost_rsyslog_conf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/rsyslog.conf^\*\.\*[\s]+(?:@|\:omrelp\:)1

Ensures system configured to export logs to remote host  oval:ssg-test_remote_rsyslog_d:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_remote_loghost_rsyslog_d:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/rsyslog.d^.+\.conf$^\*\.\*[\s]+(?:@|\:omrelp\:)1
Ensure rsyslog-gnutls is installedxccdf_org.ssgproject.content_rule_package_rsyslog-gnutls_installed mediumCCE-83987-8

Ensure rsyslog-gnutls is installed

Rule IDxccdf_org.ssgproject.content_rule_package_rsyslog-gnutls_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_rsyslog-gnutls_installed:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83987-8

References:  BP28(R43), CCI-000366, FTP_ITC_EXT.1.1, SRG-OS-000480-GPOS-00227, SRG-OS-000120-GPOS-00061, RHEL-09-652015, SV-258141r926410_rule

Description
TLS protocol support for rsyslog is installed. The rsyslog-gnutls package can be installed with the following command:
$ sudo dnf install rsyslog-gnutls
Rationale
The rsyslog-gnutls package provides Transport Layer Security (TLS) support for the rsyslog daemon, which enables secure remote logging.
OVAL test results details

package rsyslog-gnutls is installed  oval:ssg-test_package_rsyslog-gnutls_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
rsyslog-gnutlsx86_64(none)117.el98.2102.00:8.2102.0-117.el9199e2f91fd431d51rsyslog-gnutls-0:8.2102.0-117.el9.x86_64
Ensure rsyslog is Installedxccdf_org.ssgproject.content_rule_package_rsyslog_installed mediumCCE-84063-7

Ensure rsyslog is Installed

Rule IDxccdf_org.ssgproject.content_rule_package_rsyslog_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_rsyslog_installed:def:1
Time2024-01-08T16:20:29+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84063-7

References:  1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-001311, CCI-001312, CCI-000366, 164.312(a)(2)(ii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), PR.PT-1, FTP_ITC_EXT.1.1, SRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227, RHEL-09-652010, 4.2.1.1, SV-258140r926407_rule

Description
Rsyslog is installed by default. The rsyslog package can be installed with the following command:
 $ sudo dnf install rsyslog
Rationale
The rsyslog package provides the rsyslog daemon, which provides system logging services.
OVAL test results details

package rsyslog is installed  oval:ssg-test_package_rsyslog_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
rsyslogx86_64(none)117.el98.2102.00:8.2102.0-117.el9199e2f91fd431d51rsyslog-0:8.2102.0-117.el9.x86_64
Enable rsyslog Servicexccdf_org.ssgproject.content_rule_service_rsyslog_enabled mediumCCE-83989-4

Enable rsyslog Service

Rule IDxccdf_org.ssgproject.content_rule_service_rsyslog_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_rsyslog_enabled:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83989-4

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, CCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366, 164.312(a)(2)(ii), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1, CM-6(a), AU-4(1), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1, SRG-OS-000480-GPOS-00227, RHEL-09-652020, 4.2.1.2, SV-258142r926413_rule

Description
The rsyslog service provides syslog-style logging by default on Red Hat Enterprise Linux 9. The rsyslog service can be enabled with the following command:
$ sudo systemctl enable rsyslog.service
Rationale
The rsyslog service must be running in order to provide logging services, which are essential to system administration.
OVAL test results details

package rsyslog is installed  oval:ssg-test_service_rsyslog_package_rsyslog_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
rsyslogx86_64(none)117.el98.2102.00:8.2102.0-117.el9199e2f91fd431d51rsyslog-0:8.2102.0-117.el9.x86_64

Test that the rsyslog service is running  oval:ssg-test_service_running_rsyslog:tst:1  true

Following items have been found on the system:
UnitPropertyValue
rsyslog.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_rsyslog:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_rsyslog_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Install firewalld Packagexccdf_org.ssgproject.content_rule_package_firewalld_installed mediumCCE-84021-5

Install firewalld Package

Rule IDxccdf_org.ssgproject.content_rule_package_firewalld_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_firewalld_installed:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84021-5

References:  CCI-002314, CM-6(a), FMT_SMF_EXT.1, SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000298-GPOS-00116, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00232, RHEL-09-251010, SV-257935r928954_rule

Description
The firewalld package can be installed with the following command:
$ sudo dnf install firewalld
Rationale
"Firewalld" provides an easy and effective way to block/limit remote access to the system via ports, services, and protocols. Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best. Remote access is access to DoD nonpublic information systems by an authorized user (or an information system) communicating through an external, non-organization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless. Red Hat Enterprise Linux 9 functionality (e.g., SSH) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets)."
OVAL test results details

package firewalld is installed  oval:ssg-test_package_firewalld_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
firewalldnoarch(none)2.el9_31.2.50:1.2.5-2.el9_3199e2f91fd431d51firewalld-0:1.2.5-2.el9_3.noarch
Verify firewalld Enabledxccdf_org.ssgproject.content_rule_service_firewalld_enabled mediumCCE-90833-5

Verify firewalld Enabled

Rule IDxccdf_org.ssgproject.content_rule_service_firewalld_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_firewalld_enabled:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90833-5

References:  A.8.SEC-RHEL3, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.3, 3.4.7, CCI-000366, CCI-000382, CCI-002314, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3, AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a), PR.IP-1, FMT_SMF_EXT.1, SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00231, SRG-OS-000480-GPOS-00232, RHEL-09-251015, 3.4.1.2, SV-257936r925795_rule

Description
The firewalld service can be enabled with the following command:
$ sudo systemctl enable firewalld.service
Rationale
Access control methods provide the ability to enhance system security posture by restricting services and known good IP addresses and address ranges. This prevents connections from unknown hosts and protocols.
OVAL test results details

package firewalld is installed  oval:ssg-test_service_firewalld_package_firewalld_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
firewalldnoarch(none)2.el9_31.2.50:1.2.5-2.el9_3199e2f91fd431d51firewalld-0:1.2.5-2.el9_3.noarch

Test that the firewalld service is running  oval:ssg-test_service_running_firewalld:tst:1  true

Following items have been found on the system:
UnitPropertyValue
firewalld.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_firewalld:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_firewalld_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Configure the Firewalld Portsxccdf_org.ssgproject.content_rule_configure_firewalld_ports mediumCCE-86041-1

Configure the Firewalld Ports

Rule IDxccdf_org.ssgproject.content_rule_configure_firewalld_ports
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86041-1

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000382, CCI-002314, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, 1416, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115, RHEL-09-251025, 3.4.2.5, SV-257938r925801_rule

Description
Configure the firewalld ports to allow approved services to have access to the system. To configure firewalld to open ports, run the following command:
firewall-cmd --permanent --add-port=port_number/tcp
To configure firewalld to allow access for pre-defined services, run the following command:
firewall-cmd --permanent --add-service=service_name
Rationale
In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems.

Operating systems are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by one component.

To support the requirements and principles of least functionality, the operating system must support the organizational requirements, providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business.
Evaluation messages
info 
No candidate or applicable check found.
Firewalld Must Employ a Deny-all, Allow-by-exception Policy for Allowing Connections to Other Systemsxccdf_org.ssgproject.content_rule_configured_firewalld_default_deny mediumCCE-86049-4

Firewalld Must Employ a Deny-all, Allow-by-exception Policy for Allowing Connections to Other Systems

Rule IDxccdf_org.ssgproject.content_rule_configured_firewalld_default_deny
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86049-4

References:  CCI-002314, AC-17 (1), SRG-OS-000297-GPOS-00115, RHEL-09-251020, SV-257937r925798_rule

Description
Red Hat Enterprise Linux 9 incorporates the "firewalld" daemon, which allows for many different configurations. One of these configurations is zones. Zones can be utilized to a deny-all, allow-by-exception approach. The default "drop" zone will drop all incoming network packets unless it is explicitly allowed by the configuration file or is related to an outgoing network connection.
Rationale
Failure to restrict network connectivity only to authorized systems permits inbound connections from malicious systems. It also permits outbound connections that may facilitate exfiltration of data.
Evaluation messages
info 
No candidate or applicable check found.
Configure Firewalld to Use the Nftables Backendxccdf_org.ssgproject.content_rule_firewalld-backend mediumCCE-86507-1

Configure Firewalld to Use the Nftables Backend

Rule IDxccdf_org.ssgproject.content_rule_firewalld-backend
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-firewalld-backend:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86507-1

References:  CCI-002385, SC-5, SRG-OS-000420-GPOS-00186, RHEL-09-251030, SV-257939r925804_rule

Description
Firewalld can be configured with many backends, such as nftables.
Rationale
Nftables is modern kernel module for controling network connections coming into a system. Utilizing the limit statement in "nftables" can help to mitigate DoS attacks.
OVAL test results details

tests the value of FirewallBackend setting in the /etc/firewalld/firewalld.conf file  oval:ssg-test_firewalld-backend:tst:1  true

Following items have been found on the system:
PathContent
/etc/firewalld/firewalld.confFirewallBackend=nftables
Install libreswan Packagexccdf_org.ssgproject.content_rule_package_libreswan_installed mediumCCE-84068-6

Install libreswan Package

Rule IDxccdf_org.ssgproject.content_rule_package_libreswan_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_libreswan_installed:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84068-6

References:  12, 15, 3, 5, 8, APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04, CCI-001130, CCI-001131, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.4, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.15.1.1, A.15.2.1, A.6.2.1, A.6.2.2, CM-6(a), PR.AC-3, PR.MA-2, PR.PT-4, Req-4.1, 4.2.1, SRG-OS-000480-GPOS-00227, SRG-OS-000120-GPOS-00061, RHEL-09-252065, SV-257954r925849_rule

Description
The libreswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The libreswan package can be installed with the following command:
$ sudo dnf install libreswan
Rationale
Providing the ability for remote users or systems to initiate a secure VPN connection protects information when it is transmitted over a wide area network.
OVAL test results details

package libreswan is installed  oval:ssg-test_package_libreswan_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
libreswanx86_64(none)1.el94.120:4.12-1.el9199e2f91fd431d51libreswan-0:4.12-1.el9.x86_64
Verify Any Configured IPSec Tunnel Connectionsxccdf_org.ssgproject.content_rule_libreswan_approved_tunnels mediumCCE-90319-5

Verify Any Configured IPSec Tunnel Connections

Rule IDxccdf_org.ssgproject.content_rule_libreswan_approved_tunnels
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90319-5

References:  1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, CCI-000336, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), MA-4(6), CM-6(a), AC-4, SC-8, DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-252045, SV-257950r925837_rule

Description
Libreswan provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. As such, IPsec can be used to circumvent certain network requirements such as filtering. Verify that if any IPsec connection (conn) configured in /etc/ipsec.conf and /etc/ipsec.d exists is an approved organizational connection.
Rationale
IP tunneling mechanisms can be used to bypass network filtering.
Warnings
warning  Automatic remediation of this control is not available due to the unique requirements of each system.
Evaluation messages
info 
No candidate or applicable check found.
Configure Accepting Router Advertisements on All IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra mediumCCE-84120-5

Configure Accepting Router Advertisements on All IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_all_accept_ra:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84120-5

References:  A.8.SEC-RHEL6, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-254010, 3.3.9, SV-257971r925900_rule

Description
To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_ra = 0
Rationale
An illicit router advertisement message could result in a man-in-the-middle attack.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84120-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84120-5
  - DISA-STIG-RHEL-09-254010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84120-5
  - DISA-STIG-RHEL-09-254010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84120-5
  - DISA-STIG-RHEL-09-254010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv6.conf.all.accept_ra%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv6_conf_all_accept_ra.conf
        overwrite: true
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.all.accept_ra static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_ra_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_accept_ra:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_accept_ra:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_accept_ra:obj:1

net.ipv6.conf.all.accept_ra static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_ra_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_accept_ra:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_accept_ra:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_accept_ra:obj:1

net.ipv6.conf.all.accept_ra static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_ra_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_accept_ra:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.accept_ra[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.accept_ra set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_ra_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.accept_ra1
Disable Accepting ICMP Redirects for All IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects mediumCCE-84125-4

Disable Accepting ICMP Redirects for All IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_all_accept_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84125-4

References:  BP28(R22), A.8.SEC-RHEL6, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-254015, 3.3.2, SV-257972r925903_rule

Description
To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_redirects = 0
Rationale
An illicit ICMP redirect message could result in a man-in-the-middle attack.
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.all.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv6.conf.all.accept_redirects = 0

net.ipv6.conf.all.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv6.conf.all.accept_redirects = 0

net.ipv6.conf.all.accept_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_accept_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.accept_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.accept_redirects set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv6.conf.all.accept_redirects0
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route mediumCCE-84131-2

Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_all_accept_source_route:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84131-2

References:  BP28(R22), A.8.SEC-RHEL6, 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-254020, 3.3.1, SV-257973r925906_rule

Description
To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84131-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84131-2
  - DISA-STIG-RHEL-09-254020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84131-2
  - DISA-STIG-RHEL-09-254020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84131-2
  - DISA-STIG-RHEL-09-254020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv6.conf.all.accept_source_route%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv6_conf_all_accept_source_route.conf
        overwrite: true
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.all.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_source_route_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_accept_source_route:obj:1

net.ipv6.conf.all.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_source_route_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_accept_source_route:obj:1

net.ipv6.conf.all.accept_source_route static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_source_route_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.accept_source_route[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.accept_source_route set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_all_accept_source_route_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv6.conf.all.accept_source_route0
Disable Kernel Parameter for IPv6 Forwardingxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding mediumCCE-84114-8

Disable Kernel Parameter for IPv6 Forwarding

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_all_forwarding:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84114-8

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-254025, 3.2.1, SV-257974r925909_rule

Description
To set the runtime status of the net.ipv6.conf.all.forwarding kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.all.forwarding=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.forwarding = 0
Rationale
IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.forwarding from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.forwarding.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.forwarding" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_forwarding_value='0'


#
# Set runtime for net.ipv6.conf.all.forwarding
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.forwarding="$sysctl_net_ipv6_conf_all_forwarding_value"

#
# If net.ipv6.conf.all.forwarding present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.forwarding = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.forwarding")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_forwarding_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.forwarding\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.forwarding\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84114-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.forwarding.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84114-8
  - DISA-STIG-RHEL-09-254025
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

- name: Comment out any occurrences of net.ipv6.conf.all.forwarding from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.forwarding
    replace: '#net.ipv6.conf.all.forwarding'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84114-8
  - DISA-STIG-RHEL-09-254025
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
- name: XCCDF Value sysctl_net_ipv6_conf_all_forwarding_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_forwarding_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.forwarding is set
  sysctl:
    name: net.ipv6.conf.all.forwarding
    value: '{{ sysctl_net_ipv6_conf_all_forwarding_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84114-8
  - DISA-STIG-RHEL-09-254025
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.all.forwarding static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_forwarding_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_forwarding:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_forwarding:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_forwarding:obj:1

net.ipv6.conf.all.forwarding static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_forwarding_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_forwarding:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_forwarding:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_forwarding:obj:1

net.ipv6.conf.all.forwarding static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_forwarding_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_forwarding:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.forwarding[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.forwarding set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_all_forwarding_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv6.conf.all.forwarding0
Disable Accepting Router Advertisements on all IPv6 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra mediumCCE-84124-7

Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_default_accept_ra:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84124-7

References:  A.8.SEC-RHEL6, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-254030, 3.3.9, SV-257975r925912_rule

Description
To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_ra = 0
Rationale
An illicit router advertisement message could result in a man-in-the-middle attack.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84124-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84124-7
  - DISA-STIG-RHEL-09-254030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84124-7
  - DISA-STIG-RHEL-09-254030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84124-7
  - DISA-STIG-RHEL-09-254030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv6.conf.default.accept_ra%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv6_conf_default_accept_ra.conf
        overwrite: true
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.default.accept_ra static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_ra_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_default_accept_ra:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_default_accept_ra:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_default_accept_ra:obj:1

net.ipv6.conf.default.accept_ra static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_ra_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_default_accept_ra:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_default_accept_ra:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_default_accept_ra:obj:1

net.ipv6.conf.default.accept_ra static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_ra_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_default_accept_ra:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.default.accept_ra[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.default.accept_ra set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_ra_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.default.accept_ra1
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects mediumCCE-84113-0

Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_default_accept_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84113-0

References:  BP28(R22), A.8.SEC-RHEL6, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-254035, 3.3.2, SV-257976r925915_rule

Description
To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_redirects = 0
Rationale
An illicit ICMP redirect message could result in a man-in-the-middle attack.
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.default.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv6.conf.default.accept_redirects = 0

net.ipv6.conf.default.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv6.conf.default.accept_redirects = 0

net.ipv6.conf.default.accept_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_default_accept_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.default.accept_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.default.accept_redirects set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv6.conf.default.accept_redirects0
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route mediumCCE-84130-4

Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv6_conf_default_accept_source_route:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84130-4

References:  BP28(R22), A.8.SEC-RHEL6, 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, RHEL-09-254040, 3.3.1, SV-257977r925918_rule

Description
To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84130-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84130-4
  - DISA-STIG-RHEL-09-254040
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84130-4
  - DISA-STIG-RHEL-09-254040
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84130-4
  - DISA-STIG-RHEL-09-254040
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv6.conf.default.accept_source_route%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv6_conf_default_accept_source_route.conf
        overwrite: true
OVAL test results details

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1

net.ipv6.conf.all.disable_ipv6 static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_all_disable_ipv6:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.all.disable_ipv6[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.all.disable_ipv6 set to 1  oval:ssg-test_sysctl_net_ipv6_conf_all_disable_ipv6_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv6.conf.all.disable_ipv60

net.ipv6.conf.default.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_source_route_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_default_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_default_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_default_accept_source_route:obj:1

net.ipv6.conf.default.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_source_route_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv6_conf_default_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv6_conf_default_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv6_conf_default_accept_source_route:obj:1

net.ipv6.conf.default.accept_source_route static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_source_route_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv6_conf_default_accept_source_route:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv6.conf.default.accept_source_route[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv6.conf.default.accept_source_route set to the appropriate value  oval:ssg-test_sysctl_net_ipv6_conf_default_accept_source_route_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv6.conf.default.accept_source_route0
Disable Accepting ICMP Redirects for All IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects mediumCCE-84011-6

Disable Accepting ICMP Redirects for All IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_accept_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84011-6

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, 5.10.1.1, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, CCI-001503, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-253015, 3.3.2, SV-257958r925861_rule

Description
To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_redirects = 0
Rationale
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."
OVAL test results details

net.ipv4.conf.all.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.all.accept_redirects = 0

net.ipv4.conf.all.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.all.accept_redirects = 0

net.ipv4.conf.all.accept_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_accept_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.accept_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.accept_redirects set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.all.accept_redirects0
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route mediumCCE-84001-7

Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_accept_source_route:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84001-7

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253020, 3.3.1, SV-257959r925864_rule

Description
To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84001-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84001-7
  - DISA-STIG-RHEL-09-253020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84001-7
  - DISA-STIG-RHEL-09-253020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84001-7
  - DISA-STIG-RHEL-09-253020
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.all.accept_source_route%3D0%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_all_accept_source_route.conf
        overwrite: true
OVAL test results details

net.ipv4.conf.all.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_source_route_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_accept_source_route:obj:1

net.ipv4.conf.all.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_source_route_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_accept_source_route:obj:1

net.ipv4.conf.all.accept_source_route static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_source_route_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_accept_source_route:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.accept_source_route[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.accept_source_route set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_all_accept_source_route_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.all.accept_source_route0
Disable Kernel Parameter for IPv4 Forwarding on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_forwarding mediumCCE-87181-4

Disable Kernel Parameter for IPv4 Forwarding on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_forwarding
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_forwarding:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87181-4

References:  CCI-000366, CM-6(b), SRG-OS-000480-GPOS-00227, RHEL-09-253075, SV-257970r925897_rule

Description
To set the runtime status of the net.ipv4.conf.all.forwarding kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.forwarding=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.forwarding = 0
Rationale
IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.
Warnings
warning  There might be cases when certain applications can systematically override this option. One such case is Libvirt; a toolkit for managing of virtualization platforms. By default, Libvirt requires IP forwarding to be enabled to facilitate network communication between the virtualization host and guest machines. It enables IP forwarding after every reboot.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.forwarding from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.forwarding.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.forwarding" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_forwarding_value='0'


#
# Set runtime for net.ipv4.conf.all.forwarding
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.forwarding="$sysctl_net_ipv4_conf_all_forwarding_value"

#
# If net.ipv4.conf.all.forwarding present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.forwarding = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.forwarding")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_forwarding_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.forwarding\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.forwarding\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-87181-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.forwarding.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87181-4
  - DISA-STIG-RHEL-09-253075
  - NIST-800-53-CM-6(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_forwarding

- name: Comment out any occurrences of net.ipv4.conf.all.forwarding from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.forwarding
    replace: '#net.ipv4.conf.all.forwarding'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87181-4
  - DISA-STIG-RHEL-09-253075
  - NIST-800-53-CM-6(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_forwarding
- name: XCCDF Value sysctl_net_ipv4_conf_all_forwarding_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_forwarding_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.forwarding is set
  sysctl:
    name: net.ipv4.conf.all.forwarding
    value: '{{ sysctl_net_ipv4_conf_all_forwarding_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87181-4
  - DISA-STIG-RHEL-09-253075
  - NIST-800-53-CM-6(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_forwarding
OVAL test results details

net.ipv4.conf.all.forwarding static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_forwarding_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_forwarding:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_forwarding:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_forwarding:obj:1

net.ipv4.conf.all.forwarding static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_forwarding_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_forwarding:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_forwarding:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_forwarding:obj:1

net.ipv4.conf.all.forwarding static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_forwarding_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_forwarding:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.forwarding[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.forwarding set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_all_forwarding_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.all.forwarding0
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians unknownCCE-84000-9

Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_log_martians:def:1
Time2024-01-08T16:20:31+00:00
Severityunknown
Identifiers and References

Identifiers:  CCE-84000-9

References:  A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253025, 3.3.4, SV-257960r925867_rule

Description
To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.log_martians = 1
Rationale
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84000-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84000-9
  - DISA-STIG-RHEL-09-253025
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84000-9
  - DISA-STIG-RHEL-09-253025
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84000-9
  - DISA-STIG-RHEL-09-253025
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.all.log_martians%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_all_log_martians.conf
        overwrite: true
OVAL test results details

net.ipv4.conf.all.log_martians static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_log_martians_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_log_martians:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_log_martians:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_log_martians:obj:1

net.ipv4.conf.all.log_martians static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_log_martians_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_log_martians:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_log_martians:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_log_martians:obj:1

net.ipv4.conf.all.log_martians static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_log_martians_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_log_martians:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.log_martians[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.log_martians set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_all_log_martians_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv4.conf.all.log_martians0
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter mediumCCE-84008-2

Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_rp_filter:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84008-2

References:  BP28(R22), A.8.SEC-RHEL6, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, RHEL-09-253035, 3.3.7, SV-257962r925873_rule

Description
To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1
Rationale
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84008-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84008-2
  - DISA-STIG-RHEL-09-253035
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84008-2
  - DISA-STIG-RHEL-09-253035
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84008-2
  - DISA-STIG-RHEL-09-253035
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.all.rp_filter%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_all_rp_filter.conf
        overwrite: true
OVAL test results details

net.ipv4.conf.all.rp_filter static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_rp_filter_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_rp_filter:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_rp_filter:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_rp_filter:obj:1

net.ipv4.conf.all.rp_filter static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_rp_filter_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_all_rp_filter:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_all_rp_filter:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_all_rp_filter:obj:1

net.ipv4.conf.all.rp_filter static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_rp_filter_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_rp_filter:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.rp_filter[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.rp_filter set to 1 or 2  oval:ssg-test_sysctl_net_ipv4_conf_all_rp_filter_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv4.conf.all.rp_filter0
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects mediumCCE-84003-3

Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_default_accept_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84003-3

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, RHEL-09-253040, 3.3.2, SV-257963r925876_rule

Description
To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0
Rationale
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.
OVAL test results details

net.ipv4.conf.default.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.default.accept_redirects = 0

net.ipv4.conf.default.accept_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.default.accept_redirects = 0

net.ipv4.conf.default.accept_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_default_accept_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.default.accept_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.default.accept_redirects set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.default.accept_redirects0
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route mediumCCE-84007-4

Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_default_accept_source_route:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84007-4

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253045, 3.3.1, SV-257964r925879_rule

Description
To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.
OVAL test results details

net.ipv4.conf.default.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_source_route_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_accept_source_route:obj:1

net.ipv4.conf.default.accept_source_route static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_source_route_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_accept_source_route:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_accept_source_route:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_accept_source_route:obj:1

net.ipv4.conf.default.accept_source_route static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_source_route_static_pkg_correct:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/sysctl.d/50-default.confnet.ipv4.conf.default.accept_source_route = 0

kernel runtime parameter net.ipv4.conf.default.accept_source_route set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_default_accept_source_route_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.default.accept_source_route0
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians unknownCCE-84014-0

Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_default_log_martians:def:1
Time2024-01-08T16:20:31+00:00
Severityunknown
Identifiers and References

Identifiers:  CCE-84014-0

References:  A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253030, 3.3.4, SV-257961r925870_rule

Description
To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.log_martians = 1
Rationale
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84014-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84014-0
  - DISA-STIG-RHEL-09-253030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84014-0
  - DISA-STIG-RHEL-09-253030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84014-0
  - DISA-STIG-RHEL-09-253030
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.default.log_martians%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_default_log_martians.conf
        overwrite: true
OVAL test results details

net.ipv4.conf.default.log_martians static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_log_martians_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_log_martians:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_log_martians:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_log_martians:obj:1

net.ipv4.conf.default.log_martians static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_log_martians_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_log_martians:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_log_martians:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_log_martians:obj:1

net.ipv4.conf.default.log_martians static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_default_log_martians_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_default_log_martians:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.default.log_martians[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.default.log_martians set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_default_log_martians_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.ipv4.conf.default.log_martians0
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter mediumCCE-84009-0

Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_default_rp_filter:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84009-0

References:  BP28(R22), A.8.SEC-RHEL6, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253050, 3.3.7, SV-257965r925882_rule

Description
To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.rp_filter = 1
Rationale
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84009-0"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84009-0
  - DISA-STIG-RHEL-09-253050
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84009-0
  - DISA-STIG-RHEL-09-253050
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84009-0
  - DISA-STIG-RHEL-09-253050
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.conf.default.rp_filter%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_conf_default_rp_filter.conf
        overwrite: true
OVAL test results details

net.ipv4.conf.default.rp_filter static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_rp_filter_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_rp_filter:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_rp_filter:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_rp_filter:obj:1

net.ipv4.conf.default.rp_filter static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_rp_filter_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_conf_default_rp_filter:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_conf_default_rp_filter:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_conf_default_rp_filter:obj:1

net.ipv4.conf.default.rp_filter static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_default_rp_filter_static_pkg_correct:tst:1  false

Following items have been found on the system:
PathContent
/usr/lib/sysctl.d/50-default.confnet.ipv4.conf.default.rp_filter = 2
/usr/lib/sysctl.d/50-redhat.confnet.ipv4.conf.default.rp_filter = 1

kernel runtime parameter net.ipv4.conf.default.rp_filter set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_conf_default_rp_filter_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.default.rp_filter1
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts mediumCCE-84004-1

Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_icmp_echo_ignore_broadcasts:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84004-1

References:  A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, RHEL-09-253055, 3.3.5, SV-257966r925885_rule

Description
To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1
Rationale
Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84004-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84004-1
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253055
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84004-1
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253055
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84004-1
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253055
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.icmp_echo_ignore_broadcasts%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_icmp_echo_ignore_broadcasts.conf
        overwrite: true
OVAL test results details

net.ipv4.icmp_echo_ignore_broadcasts static configuration  oval:ssg-test_sysctl_net_ipv4_icmp_echo_ignore_broadcasts_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1

net.ipv4.icmp_echo_ignore_broadcasts static configuration  oval:ssg-test_sysctl_net_ipv4_icmp_echo_ignore_broadcasts_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1

net.ipv4.icmp_echo_ignore_broadcasts static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_icmp_echo_ignore_broadcasts_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_icmp_echo_ignore_broadcasts:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.icmp_echo_ignore_broadcasts[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.icmp_echo_ignore_broadcasts set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_icmp_echo_ignore_broadcasts_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.icmp_echo_ignore_broadcasts1
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses unknownCCE-84015-7

Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_icmp_ignore_bogus_error_responses:def:1
Time2024-01-08T16:20:31+00:00
Severityunknown
Identifiers and References

Identifiers:  CCE-84015-7

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, Req-1.4.3, SRG-OS-000480-GPOS-00227, RHEL-09-253060, 3.3.6, SV-257967r925888_rule

Description
To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1
Rationale
Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84015-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84015-7
  - DISA-STIG-RHEL-09-253060
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84015-7
  - DISA-STIG-RHEL-09-253060
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84015-7
  - DISA-STIG-RHEL-09-253060
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.icmp_ignore_bogus_error_responses%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_icmp_ignore_bogus_error_responses.conf
        overwrite: true
OVAL test results details

net.ipv4.icmp_ignore_bogus_error_responses static configuration  oval:ssg-test_sysctl_net_ipv4_icmp_ignore_bogus_error_responses_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1

net.ipv4.icmp_ignore_bogus_error_responses static configuration  oval:ssg-test_sysctl_net_ipv4_icmp_ignore_bogus_error_responses_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1

net.ipv4.icmp_ignore_bogus_error_responses static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_icmp_ignore_bogus_error_responses_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_icmp_ignore_bogus_error_responses:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.icmp_ignore_bogus_error_responses[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.icmp_ignore_bogus_error_responses set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_icmp_ignore_bogus_error_responses_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.icmp_ignore_bogus_error_responses1
Enable Kernel Parameter to Use TCP Syncookies on Network Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies mediumCCE-84006-6

Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_tcp_syncookies:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84006-6

References:  BP28(R22), A.8.SEC-RHEL6, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001095, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.1, SRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071, RHEL-09-253010, 3.3.8, SV-257957r925858_rule

Description
To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.tcp_syncookies=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1
Rationale
A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-84006-6"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84006-6
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84006-6
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84006-6
  - CJIS-5.10.1.1
  - DISA-STIG-RHEL-09-253010
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.ipv4.tcp_syncookies%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_ipv4_tcp_syncookies.conf
        overwrite: true
OVAL test results details

net.ipv4.tcp_syncookies static configuration  oval:ssg-test_sysctl_net_ipv4_tcp_syncookies_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_tcp_syncookies:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_tcp_syncookies:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_tcp_syncookies:obj:1

net.ipv4.tcp_syncookies static configuration  oval:ssg-test_sysctl_net_ipv4_tcp_syncookies_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_ipv4_tcp_syncookies:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_ipv4_tcp_syncookies:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_ipv4_tcp_syncookies:obj:1

net.ipv4.tcp_syncookies static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_tcp_syncookies_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_tcp_syncookies:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.tcp_syncookies[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.tcp_syncookies set to the appropriate value  oval:ssg-test_sysctl_net_ipv4_tcp_syncookies_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.tcp_syncookies1
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects mediumCCE-83997-7

Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_all_send_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83997-7

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, 1.4.2, SRG-OS-000480-GPOS-00227, RHEL-09-253065, 3.2.2, SV-257968r925891_rule

Description
To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.send_redirects = 0
Rationale
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
OVAL test results details

net.ipv4.conf.all.send_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_send_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.all.send_redirects = 0

net.ipv4.conf.all.send_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_all_send_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.all.send_redirects = 0

net.ipv4.conf.all.send_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_all_send_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_all_send_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.all.send_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.all.send_redirects set to 0  oval:ssg-test_sysctl_net_ipv4_conf_all_send_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.all.send_redirects0
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects mediumCCE-83999-3

Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_ipv4_conf_default_send_redirects:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83999-3

References:  BP28(R22), A.8.SEC-RHEL6, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-253070, 3.2.2, SV-257969r925894_rule

Description
To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.send_redirects = 0
Rationale
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
OVAL test results details

net.ipv4.conf.default.send_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_send_redirects_static_user:tst:1  true

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.default.send_redirects = 0

net.ipv4.conf.default.send_redirects static configuration  oval:ssg-test_sysctl_net_ipv4_conf_default_send_redirects_static_user_missing:tst:1  false

Following items have been found on the system:
PathContent
/etc/sysctl.d/50-libreswan.confnet.ipv4.conf.default.send_redirects = 0

net.ipv4.conf.default.send_redirects static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_ipv4_conf_default_send_redirects_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_ipv4_conf_default_send_redirects:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.ipv4.conf.default.send_redirects[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.ipv4.conf.default.send_redirects set to 0  oval:ssg-test_sysctl_net_ipv4_conf_default_send_redirects_runtime:tst:1  true

Following items have been found on the system:
NameValue
net.ipv4.conf.default.send_redirects0
Disable ATM Supportxccdf_org.ssgproject.content_rule_kernel_module_atm_disabled mediumCCE-84137-9

Disable ATM Support

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_atm_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_atm_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84137-9

References:  CCI-000381, CCI-000366, AC-18, FMT_SMF_EXT.1, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-213045, SV-257804r925399_rule

Description
The Asynchronous Transfer Mode (ATM) is a protocol operating on network, data link, and physical layers, based on virtual circuits and virtual paths. To configure the system to prevent the atm kernel module from being loaded, add the following line to the file /etc/modprobe.d/atm.conf:
install atm /bin/true
Rationale
Disabling ATM protects the system against exploitation of any flaws in its implementation.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install atm" /etc/modprobe.d/atm.conf ; then
	
	sed -i 's#^install atm.*#install atm /bin/true#g' /etc/modprobe.d/atm.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/atm.conf
	echo "install atm /bin/true" >> /etc/modprobe.d/atm.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist atm$" /etc/modprobe.d/atm.conf ; then
	echo "blacklist atm" >> /etc/modprobe.d/atm.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'atm' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/atm.conf
    regexp: install\s+atm
    line: install atm /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84137-9
  - DISA-STIG-RHEL-09-213045
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_atm_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'atm' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/atm.conf
    regexp: ^blacklist atm$
    line: blacklist atm
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84137-9
  - DISA-STIG-RHEL-09-213045
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_atm_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20atm%20/bin/true%0Ablacklist%20atm%0A
        mode: 0644
        path: /etc/modprobe.d/atm.conf
        overwrite: true
OVAL test results details

kernel module atm blacklisted  oval:ssg-test_kernmod_atm_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_atm_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+atm$1

kernel module atm disabled  oval:ssg-test_kernmod_atm_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_atm_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+atm\s+(/bin/false|/bin/true)$1
Disable CAN Supportxccdf_org.ssgproject.content_rule_kernel_module_can_disabled mediumCCE-84134-6

Disable CAN Support

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_can_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_can_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84134-6

References:  CCI-000381, CCI-000366, AC-18, FMT_SMF_EXT.1, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-213050, SV-257805r925402_rule

Description
The Controller Area Network (CAN) is a serial communications protocol which was initially developed for automotive and is now also used in marine, industrial, and medical applications. To configure the system to prevent the can kernel module from being loaded, add the following line to the file /etc/modprobe.d/can.conf:
install can /bin/true
Rationale
Disabling CAN protects the system against exploitation of any flaws in its implementation.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install can" /etc/modprobe.d/can.conf ; then
	
	sed -i 's#^install can.*#install can /bin/true#g' /etc/modprobe.d/can.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/can.conf
	echo "install can /bin/true" >> /etc/modprobe.d/can.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist can$" /etc/modprobe.d/can.conf ; then
	echo "blacklist can" >> /etc/modprobe.d/can.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'can' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/can.conf
    regexp: install\s+can
    line: install can /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84134-6
  - DISA-STIG-RHEL-09-213050
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_can_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'can' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/can.conf
    regexp: ^blacklist can$
    line: blacklist can
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84134-6
  - DISA-STIG-RHEL-09-213050
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_can_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20can%20/bin/true%0Ablacklist%20can%0A
        mode: 0644
        path: /etc/modprobe.d/can.conf
        overwrite: true
OVAL test results details

kernel module can blacklisted  oval:ssg-test_kernmod_can_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_can_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+can$1

kernel module can disabled  oval:ssg-test_kernmod_can_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_can_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+can\s+(/bin/false|/bin/true)$1
Disable IEEE 1394 (FireWire) Supportxccdf_org.ssgproject.content_rule_kernel_module_firewire-core_disabled lowCCE-84060-3

Disable IEEE 1394 (FireWire) Support

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_firewire-core_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_firewire-core_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84060-3

References:  CCI-000381, AC-18, FMT_SMF_EXT.1, SRG-OS-000095-GPOS-00049, RHEL-09-213055, SV-257806r928942_rule

Description
The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. To configure the system to prevent the firewire-core kernel module from being loaded, add the following line to the file /etc/modprobe.d/firewire-core.conf:
install firewire-core /bin/true
Rationale
Disabling FireWire protects the system against exploitation of any flaws in its implementation.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install firewire-core" /etc/modprobe.d/firewire-core.conf ; then
	
	sed -i 's#^install firewire-core.*#install firewire-core /bin/true#g' /etc/modprobe.d/firewire-core.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/firewire-core.conf
	echo "install firewire-core /bin/true" >> /etc/modprobe.d/firewire-core.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist firewire-core$" /etc/modprobe.d/firewire-core.conf ; then
	echo "blacklist firewire-core" >> /etc/modprobe.d/firewire-core.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'firewire-core' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/firewire-core.conf
    regexp: install\s+firewire-core
    line: install firewire-core /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84060-3
  - DISA-STIG-RHEL-09-213055
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_firewire-core_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

- name: Ensure kernel module 'firewire-core' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/firewire-core.conf
    regexp: ^blacklist firewire-core$
    line: blacklist firewire-core
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84060-3
  - DISA-STIG-RHEL-09-213055
  - NIST-800-53-AC-18
  - disable_strategy
  - kernel_module_firewire-core_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20firewire-core%20/bin/true%0Ablacklist%20firewire-core%0A
        mode: 0644
        path: /etc/modprobe.d/firewire-core.conf
        overwrite: true
OVAL test results details

kernel module firewire-core blacklisted  oval:ssg-test_kernmod_firewire-core_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_firewire-core_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+firewire-core$1

kernel module firewire-core disabled  oval:ssg-test_kernmod_firewire-core_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_firewire-core_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+firewire-core\s+(/bin/false|/bin/true)$1
Disable SCTP Supportxccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled mediumCCE-84139-5

Disable SCTP Support

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_sctp_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_sctp_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84139-5

References:  11, 14, 3, 9, 5.10.1, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, CCI-000381, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, Req-1.4.2, 1.4.2, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-213060, SV-257807r925408_rule

Description
The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to the file /etc/modprobe.d/sctp.conf:
install sctp /bin/true
Rationale
Disabling SCTP protects the system against exploitation of any flaws in its implementation.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	
	sed -i 's#^install sctp.*#install sctp /bin/true#g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/true" >> /etc/modprobe.d/sctp.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist sctp$" /etc/modprobe.d/sctp.conf ; then
	echo "blacklist sctp" >> /etc/modprobe.d/sctp.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: install\s+sctp
    line: install sctp /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84139-5
  - CJIS-5.10.1
  - DISA-STIG-RHEL-09-213060
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'sctp' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: ^blacklist sctp$
    line: blacklist sctp
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84139-5
  - CJIS-5.10.1
  - DISA-STIG-RHEL-09-213060
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - kernel_module_sctp_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20sctp%20/bin/true%0Ablacklist%20sctp%0A
        mode: 0644
        path: /etc/modprobe.d/sctp.conf
        overwrite: true
OVAL test results details

kernel module sctp blacklisted  oval:ssg-test_kernmod_sctp_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_sctp_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+sctp$1

kernel module sctp disabled  oval:ssg-test_kernmod_sctp_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_sctp_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+sctp\s+(/bin/false|/bin/true)$1
Disable TIPC Supportxccdf_org.ssgproject.content_rule_kernel_module_tipc_disabled lowCCE-84065-2

Disable TIPC Support

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_tipc_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_tipc_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84065-2

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, FMT_SMF_EXT.1, SRG-OS-000095-GPOS-00049, RHEL-09-213065, 3.1.3, SV-257808r925411_rule

Description
The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the system to prevent the tipc kernel module from being loaded, add the following line to the file /etc/modprobe.d/tipc.conf:
install tipc /bin/true
Rationale
Disabling TIPC protects the system against exploitation of any flaws in its implementation.
Warnings
warning  This configuration baseline was created to deploy the base operating system for general purpose workloads. When the operating system is configured for certain purposes, such as a node in High Performance Computing cluster, it is expected that the tipc kernel module will be loaded.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install tipc" /etc/modprobe.d/tipc.conf ; then
	
	sed -i 's#^install tipc.*#install tipc /bin/true#g' /etc/modprobe.d/tipc.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/tipc.conf
	echo "install tipc /bin/true" >> /etc/modprobe.d/tipc.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist tipc$" /etc/modprobe.d/tipc.conf ; then
	echo "blacklist tipc" >> /etc/modprobe.d/tipc.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'tipc' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/tipc.conf
    regexp: install\s+tipc
    line: install tipc /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84065-2
  - DISA-STIG-RHEL-09-213065
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_tipc_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

- name: Ensure kernel module 'tipc' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/tipc.conf
    regexp: ^blacklist tipc$
    line: blacklist tipc
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84065-2
  - DISA-STIG-RHEL-09-213065
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_tipc_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20tipc%20/bin/true%0Ablacklist%20tipc%0A
        mode: 0644
        path: /etc/modprobe.d/tipc.conf
        overwrite: true
OVAL test results details

kernel module tipc blacklisted  oval:ssg-test_kernmod_tipc_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_tipc_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+tipc$1

kernel module tipc disabled  oval:ssg-test_kernmod_tipc_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_tipc_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+tipc\s+(/bin/false|/bin/true)$1
Disable Bluetooth Kernel Modulexccdf_org.ssgproject.content_rule_kernel_module_bluetooth_disabled mediumCCE-84067-8

Disable Bluetooth Kernel Module

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_bluetooth_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_bluetooth_disabled:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84067-8

References:  11, 12, 14, 15, 3, 8, 9, 5.13.1.3, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, 3.1.16, CCI-000085, CCI-001443, CCI-001444, CCI-001551, CCI-002418, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-18(a), AC-18(3), CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000095-GPOS-00049, SRG-OS-000300-GPOS-00118, RHEL-09-291035, SV-258039r926104_rule

Description
The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate /etc/modprobe.d configuration file to prevent the loading of the Bluetooth module:
install bluetooth /bin/true
Rationale
If Bluetooth functionality must be disabled, preventing the kernel from loading the kernel module provides an additional safeguard against its activation.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install bluetooth" /etc/modprobe.d/bluetooth.conf ; then
	
	sed -i 's#^install bluetooth.*#install bluetooth /bin/true#g' /etc/modprobe.d/bluetooth.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/bluetooth.conf
	echo "install bluetooth /bin/true" >> /etc/modprobe.d/bluetooth.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist bluetooth$" /etc/modprobe.d/bluetooth.conf ; then
	echo "blacklist bluetooth" >> /etc/modprobe.d/bluetooth.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'bluetooth' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/bluetooth.conf
    regexp: install\s+bluetooth
    line: install bluetooth /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84067-8
  - CJIS-5.13.1.3
  - DISA-STIG-RHEL-09-291035
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - kernel_module_bluetooth_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'bluetooth' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/bluetooth.conf
    regexp: ^blacklist bluetooth$
    line: blacklist bluetooth
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-84067-8
  - CJIS-5.13.1.3
  - DISA-STIG-RHEL-09-291035
  - NIST-800-171-3.1.16
  - NIST-800-53-AC-18(3)
  - NIST-800-53-AC-18(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - kernel_module_bluetooth_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20bluetooth%20/bin/true%0Ablacklist%20bluetooth%0A
        mode: 0644
        path: /etc/modprobe.d/bluetooth.conf
        overwrite: true
OVAL test results details

kernel module bluetooth blacklisted  oval:ssg-test_kernmod_bluetooth_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_bluetooth_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+bluetooth$1

kernel module bluetooth disabled  oval:ssg-test_kernmod_bluetooth_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_bluetooth_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+bluetooth\s+(/bin/false|/bin/true)$1
Deactivate Wireless Network Interfacesxccdf_org.ssgproject.content_rule_wireless_disable_interfaces mediumCCE-84066-0

Deactivate Wireless Network Interfaces

Rule IDxccdf_org.ssgproject.content_rule_wireless_disable_interfaces
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84066-0

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, 3.1.16, CCI-000085, CCI-002418, CCI-002421, CCI-001443, CCI-001444, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, 1315, 1319, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-18(a), AC-18(3), CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.3.3, 1.4.3, SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-000481, RHEL-09-291040, 3.1.2, SV-258040r926107_rule

Description
Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable all wireless network interfaces with the following command:
$ sudo nmcli radio all off
Rationale
The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.
NetworkManager DNS Mode Must Be Must Configuredxccdf_org.ssgproject.content_rule_networkmanager_dns_mode mediumCCE-86805-9

NetworkManager DNS Mode Must Be Must Configured

Rule IDxccdf_org.ssgproject.content_rule_networkmanager_dns_mode
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-networkmanager_dns_mode:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86805-9

References:  CCI-000366, CM-6(b), SRG-OS-000480-GPOS-00227, RHEL-09-252040, SV-257949r925834_rule

Description
The DNS processing mode in NetworkManager describes how DNS is processed on the system. Depending the mode some changes the system's DNS may not be respected.
Rationale
To ensure that DNS resolver settings are respected, a DNS mode in NetworkManager must be configured.

Complexity:low
Disruption:medium
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if rpm --quiet -q NetworkManager; then

var_networkmanager_dns_mode='none'



# Try find '[main]' and 'dns' in '/etc/NetworkManager/NetworkManager.conf', if it exists, set
# to '$var_networkmanager_dns_mode', if it isn't here, add it, if '[main]' doesn't exist, add it there
if grep -qzosP '[[:space:]]*\[main]([^\n\[]*\n+)+?[[:space:]]*dns' '/etc/NetworkManager/NetworkManager.conf'; then
    
    sed -i "s/dns[^(\n)]*/dns=$var_networkmanager_dns_mode/" '/etc/NetworkManager/NetworkManager.conf'
elif grep -qs '[[:space:]]*\[main]' '/etc/NetworkManager/NetworkManager.conf'; then
    sed -i "/[[:space:]]*\[main]/a dns=$var_networkmanager_dns_mode" '/etc/NetworkManager/NetworkManager.conf'
else
    if test -d "/etc/NetworkManager"; then
        printf '%s\n' '[main]' "dns=$var_networkmanager_dns_mode" >> '/etc/NetworkManager/NetworkManager.conf'
    else
        echo "Config file directory '/etc/NetworkManager' doesnt exist, not remediating, assuming non-applicability." >&2
    fi
fi

systemctl reload NetworkManager

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-86805-9
  - DISA-STIG-RHEL-09-252040
  - NIST-800-53-CM-6(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - networkmanager_dns_mode
  - no_reboot_needed
- name: XCCDF Value var_networkmanager_dns_mode # promote to variable
  set_fact:
    var_networkmanager_dns_mode: !!str none
  tags:
    - always

- name: Set 'dns' to '{{ var_networkmanager_dns_mode }}' in the [main] section of
    '/etc/NetworkManager/NetworkManager.conf'
  ini_file:
    path: /etc/NetworkManager/NetworkManager.conf
    section: main
    option: dns
    value: '{{ var_networkmanager_dns_mode }}'
    create: true
    mode: 420
  when: '"NetworkManager" in ansible_facts.packages'
  tags:
  - CCE-86805-9
  - DISA-STIG-RHEL-09-252040
  - NIST-800-53-CM-6(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - networkmanager_dns_mode
  - no_reboot_needed

- name: NetworkManager DNS Mode Must Be Must Configured - Ensure Network Manager
  ansible.builtin.systemd:
    name: NetworkManager
    state: reloaded
  when: '"NetworkManager" in ansible_facts.packages'
  tags:
  - CCE-86805-9
  - DISA-STIG-RHEL-09-252040
  - NIST-800-53-CM-6(b)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - networkmanager_dns_mode
  - no_reboot_needed
OVAL test results details

tests the value of dns setting in the /etc/NetworkManager/NetworkManager.conf file  oval:ssg-test_networkmanager_dns_mode:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_networkmanager_dns_mode:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/NetworkManager/NetworkManager.conf^\s*\[main\].*(?:\n\s*[^[\s].*)*\n^\s*dns[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1

The configuration file /etc/NetworkManager/NetworkManager.conf exists for networkmanager_dns_mode  oval:ssg-test_networkmanager_dns_mode_config_file_exists:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/NetworkManager/NetworkManager.confregular002263rw-r--r-- 
Configure Multiple DNS Servers in /etc/resolv.confxccdf_org.ssgproject.content_rule_network_configure_name_resolution mediumCCE-86858-8

Configure Multiple DNS Servers in /etc/resolv.conf

Rule IDxccdf_org.ssgproject.content_rule_network_configure_name_resolution
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-network_configure_name_resolution:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86858-8

References:  12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, SC-20(a), CM-6(a), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-252035, SV-257948r925831_rule

Description
Determine whether the system is using local or DNS name resolution with the following command:
$ sudo grep hosts /etc/nsswitch.conf
hosts: files dns
If the DNS entry is missing from the host's line in the "/etc/nsswitch.conf" file, the "/etc/resolv.conf" file must be empty. Verify the "/etc/resolv.conf" file is empty with the following command:
$ sudo ls -al /etc/resolv.conf
-rw-r--r-- 1 root root 0 Aug 19 08:31 resolv.conf
If the DNS entry is found on the host's line of the "/etc/nsswitch.conf" file, then verify the following:
Multiple Domain Name System (DNS) Servers should be configured in /etc/resolv.conf. This provides redundant name resolution services in the event that a domain server crashes. To configure the system to contain as least 2 DNS servers, add a corresponding nameserver ip_address entry in /etc/resolv.conf for each DNS server where ip_address is the IP address of a valid DNS server. For example:
search example.com
nameserver 192.168.0.1
nameserver 192.168.0.2
Rationale
To provide availability for name resolution services, multiple redundant name servers are mandated. A failure in name resolution could lead to the failure of security functions requiring name resolution, which may include time synchronization, centralized authentication, and remote system logging.
OVAL test results details

check if dns is set in host line in /etc/nsswitch.conf  oval:ssg-test_host_line_dns_parameter_nsswitch:tst:1  true

Following items have been found on the system:
PathContent
/etc/nsswitch.confhosts: files dns myhostname

check if more than one nameserver in /etc/resolv.conf  oval:ssg-test_network_configure_name_resolution:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_network_configure_name_resolution:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/resolv.conf^[\s]*nameserver[\s]+([0-9\.]+)$1

check if dns is set in host line in /etc/nsswitch.conf  oval:ssg-test_host_line_dns_parameter_nsswitch:tst:1  true

Following items have been found on the system:
PathContent
/etc/nsswitch.confhosts: files dns myhostname

check if /etc/resolv.conf is empty  oval:ssg-test_file_empty_resolv:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/resolv.confregular0070rw-r--r-- 
Ensure System is Not Acting as a Network Snifferxccdf_org.ssgproject.content_rule_network_sniffer_disabled mediumCCE-83996-9

Ensure System is Not Acting as a Network Sniffer

Rule IDxccdf_org.ssgproject.content_rule_network_sniffer_disabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-network_sniffer_disabled:def:1
Time2024-01-08T16:20:30+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83996-9

References:  1, 11, 14, 3, 9, APO11.06, APO12.06, BAI03.10, BAI09.01, BAI09.02, BAI09.03, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS04.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.2.3.4, 4.3.3.3.7, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, SR 7.8, A.11.1.2, A.11.2.4, A.11.2.5, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.16.1.6, A.8.1.1, A.8.1.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-7(2), MA-3, DE.DP-5, ID.AM-1, PR.IP-1, PR.MA-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-251040, SV-257941r925810_rule

Description
The system should not be acting as a network sniffer, which can capture all traffic on the network to which it is connected. Run the following to determine if any interface is running in promiscuous mode:
$ ip link | grep PROMISC
Promiscuous mode of an interface can be disabled with the following command:
$ sudo ip link set dev device_name multicast off promisc off
Rationale
Network interfaces in promiscuous mode allow for the capture of all network traffic visible to the system. If unauthorized individuals can access these applications, it may allow them to collect information such as logon IDs, passwords, and key exchanges between systems.

If the system is being used to perform a network troubleshooting function, the use of these tools must be documented with the Information Systems Security Manager (ISSM) and restricted to only authorized personnel.
OVAL test results details

check all network interfaces for PROMISC flag  oval:ssg-test_promisc_interfaces:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_promisc_interfaces:obj:1 of type interface_object
NameFilter
^.*$oval:ssg-state_promisc:ste:1
Verify Group Who Owns Backup group Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group mediumCCE-83928-2

Verify Group Who Owns Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_backup_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83928-2

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232105, 6.1.4, SV-257901r925690_rule

Description
To properly set the group owner of /etc/group-, run the command:
$ sudo chgrp root /etc/group-
Rationale
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing group ownership of /etc/group-  oval:ssg-test_file_groupowner_backup_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_backup_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/group-oval:ssg-symlink_file_groupowner_backup_etc_group_uid_0:ste:1oval:ssg-state_file_groupowner_backup_etc_group_gid_0_0:ste:1
Verify Group Who Owns Backup gshadow Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow mediumCCE-83951-4

Verify Group Who Owns Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_backup_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83951-4

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232125, 6.1.8, SV-257905r925702_rule

Description
To properly set the group owner of /etc/gshadow-, run the command:
$ sudo chgrp root /etc/gshadow-
Rationale
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/gshadow-  oval:ssg-test_file_groupowner_backup_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_backup_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadow-oval:ssg-symlink_file_groupowner_backup_etc_gshadow_uid_0:ste:1oval:ssg-state_file_groupowner_backup_etc_gshadow_gid_0_0:ste:1
Verify Group Who Owns Backup passwd Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd mediumCCE-83933-2

Verify Group Who Owns Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_backup_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83933-2

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232145, 6.1.2, SV-257909r925714_rule

Description
To properly set the group owner of /etc/passwd-, run the command:
$ sudo chgrp root /etc/passwd-
Rationale
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/passwd-  oval:ssg-test_file_groupowner_backup_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_backup_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwd-oval:ssg-symlink_file_groupowner_backup_etc_passwd_uid_0:ste:1oval:ssg-state_file_groupowner_backup_etc_passwd_gid_0_0:ste:1
Verify User Who Owns Backup shadow Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow mediumCCE-83938-1

Verify User Who Owns Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_backup_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83938-1

References:  Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232165, 6.1.6, SV-257913r925726_rule

Description
To properly set the group owner of /etc/shadow-, run the command:
$ sudo chgrp root /etc/shadow-
Rationale
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/shadow-  oval:ssg-test_file_groupowner_backup_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_backup_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadow-oval:ssg-symlink_file_groupowner_backup_etc_shadow_uid_0:ste:1oval:ssg-state_file_groupowner_backup_etc_shadow_gid_0_0:ste:1
Verify Group Who Owns group Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_group mediumCCE-83945-6

Verify Group Who Owns group File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83945-6

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232095, 6.1.3, SV-257899r925684_rule

Description
To properly set the group owner of /etc/group, run the command:
$ sudo chgrp root /etc/group
Rationale
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing group ownership of /etc/group  oval:ssg-test_file_groupowner_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/groupoval:ssg-symlink_file_groupowner_etc_group_uid_0:ste:1oval:ssg-state_file_groupowner_etc_group_gid_0_0:ste:1
Verify Group Who Owns gshadow Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow mediumCCE-83948-0

Verify Group Who Owns gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83948-0

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232115, 6.1.7, SV-257903r925696_rule

Description
To properly set the group owner of /etc/gshadow, run the command:
$ sudo chgrp root /etc/gshadow
Rationale
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/gshadow  oval:ssg-test_file_groupowner_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadowoval:ssg-symlink_file_groupowner_etc_gshadow_uid_0:ste:1oval:ssg-state_file_groupowner_etc_gshadow_gid_0_0:ste:1
Verify Group Who Owns passwd Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd mediumCCE-83950-6

Verify Group Who Owns passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83950-6

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232135, 6.1.1, SV-257907r925708_rule

Description
To properly set the group owner of /etc/passwd, run the command:
$ sudo chgrp root /etc/passwd
Rationale
The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/passwd  oval:ssg-test_file_groupowner_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwdoval:ssg-symlink_file_groupowner_etc_passwd_uid_0:ste:1oval:ssg-state_file_groupowner_etc_passwd_gid_0_0:ste:1
Verify Group Who Owns shadow Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow mediumCCE-83930-8

Verify Group Who Owns shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83930-8

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232155, 6.1.5, SV-257911r925720_rule

Description
To properly set the group owner of /etc/shadow, run the command:
$ sudo chgrp root /etc/shadow
Rationale
The /etc/shadow file stores password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing group ownership of /etc/shadow  oval:ssg-test_file_groupowner_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadowoval:ssg-symlink_file_groupowner_etc_shadow_uid_0:ste:1oval:ssg-state_file_groupowner_etc_shadow_gid_0_0:ste:1
Verify User Who Owns Backup group Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_group mediumCCE-83944-9

Verify User Who Owns Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_backup_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83944-9

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232100, 6.1.4, SV-257900r925687_rule

Description
To properly set the owner of /etc/group-, run the command:
$ sudo chown root /etc/group- 
Rationale
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing user ownership of /etc/group-  oval:ssg-test_file_owner_backup_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_backup_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/group-oval:ssg-symlink_file_owner_backup_etc_group_uid_0:ste:1oval:ssg-state_file_owner_backup_etc_group_uid_0_0:ste:1
Verify User Who Owns Backup gshadow Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow mediumCCE-83929-0

Verify User Who Owns Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_backup_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83929-0

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232120, 6.1.8, SV-257904r925699_rule

Description
To properly set the owner of /etc/gshadow-, run the command:
$ sudo chown root /etc/gshadow- 
Rationale
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing user ownership of /etc/gshadow-  oval:ssg-test_file_owner_backup_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_backup_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadow-oval:ssg-symlink_file_owner_backup_etc_gshadow_uid_0:ste:1oval:ssg-state_file_owner_backup_etc_gshadow_uid_0_0:ste:1
Verify User Who Owns Backup passwd Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd mediumCCE-83947-2

Verify User Who Owns Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_backup_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83947-2

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232140, 6.1.2, SV-257908r925711_rule

Description
To properly set the owner of /etc/passwd-, run the command:
$ sudo chown root /etc/passwd- 
Rationale
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
OVAL test results details

Testing user ownership of /etc/passwd-  oval:ssg-test_file_owner_backup_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_backup_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwd-oval:ssg-symlink_file_owner_backup_etc_passwd_uid_0:ste:1oval:ssg-state_file_owner_backup_etc_passwd_uid_0_0:ste:1
Verify Group Who Owns Backup shadow Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow mediumCCE-83949-8

Verify Group Who Owns Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_backup_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83949-8

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232160, 6.1.6, SV-257912r925723_rule

Description
To properly set the owner of /etc/shadow-, run the command:
$ sudo chown root /etc/shadow- 
Rationale
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing user ownership of /etc/shadow-  oval:ssg-test_file_owner_backup_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_backup_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadow-oval:ssg-symlink_file_owner_backup_etc_shadow_uid_0:ste:1oval:ssg-state_file_owner_backup_etc_shadow_uid_0_0:ste:1
Verify User Who Owns group Filexccdf_org.ssgproject.content_rule_file_owner_etc_group mediumCCE-83925-8

Verify User Who Owns group File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83925-8

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232090, 6.1.3, SV-257898r925681_rule

Description
To properly set the owner of /etc/group, run the command:
$ sudo chown root /etc/group 
Rationale
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing user ownership of /etc/group  oval:ssg-test_file_owner_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/groupoval:ssg-symlink_file_owner_etc_group_uid_0:ste:1oval:ssg-state_file_owner_etc_group_uid_0_0:ste:1
Verify User Who Owns gshadow Filexccdf_org.ssgproject.content_rule_file_owner_etc_gshadow mediumCCE-83924-1

Verify User Who Owns gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83924-1

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232110, 6.1.7, SV-257902r925693_rule

Description
To properly set the owner of /etc/gshadow, run the command:
$ sudo chown root /etc/gshadow 
Rationale
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing user ownership of /etc/gshadow  oval:ssg-test_file_owner_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadowoval:ssg-symlink_file_owner_etc_gshadow_uid_0:ste:1oval:ssg-state_file_owner_etc_gshadow_uid_0_0:ste:1
Verify User Who Owns passwd Filexccdf_org.ssgproject.content_rule_file_owner_etc_passwd mediumCCE-83943-1

Verify User Who Owns passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83943-1

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232130, 6.1.1, SV-257906r925705_rule

Description
To properly set the owner of /etc/passwd, run the command:
$ sudo chown root /etc/passwd 
Rationale
The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.
OVAL test results details

Testing user ownership of /etc/passwd  oval:ssg-test_file_owner_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwdoval:ssg-symlink_file_owner_etc_passwd_uid_0:ste:1oval:ssg-state_file_owner_etc_passwd_uid_0_0:ste:1
Verify User Who Owns shadow Filexccdf_org.ssgproject.content_rule_file_owner_etc_shadow mediumCCE-83926-6

Verify User Who Owns shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83926-6

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232150, 6.1.5, SV-257910r925717_rule

Description
To properly set the owner of /etc/shadow, run the command:
$ sudo chown root /etc/shadow 
Rationale
The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.
OVAL test results details

Testing user ownership of /etc/shadow  oval:ssg-test_file_owner_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadowoval:ssg-symlink_file_owner_etc_shadow_uid_0:ste:1oval:ssg-state_file_owner_etc_shadow_uid_0_0:ste:1
Verify Permissions on Backup group Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group mediumCCE-83939-9

Verify Permissions on Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_backup_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83939-9

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232060, 6.1.4, SV-257892r925663_rule

Description
To properly set the permissions of /etc/group-, run the command:
$ sudo chmod 0644 /etc/group-
Rationale
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing mode of /etc/group-  oval:ssg-test_file_permissions_backup_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_backup_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/group-oval:ssg-exclude_symlinks__backup_etc_group:ste:1oval:ssg-state_file_permissions_backup_etc_group_0_mode_0644or_stricter_:ste:1
Verify Permissions on Backup gshadow Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow mediumCCE-83942-3

Verify Permissions on Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_backup_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83942-3

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, RHEL-09-232070, 6.1.8, SV-257894r925669_rule

Description
To properly set the permissions of /etc/gshadow-, run the command:
$ sudo chmod 0000 /etc/gshadow-
Rationale
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing mode of /etc/gshadow-  oval:ssg-test_file_permissions_backup_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_backup_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadow-oval:ssg-exclude_symlinks__backup_etc_gshadow:ste:1oval:ssg-state_file_permissions_backup_etc_gshadow_0_mode_0000or_stricter_:ste:1
Verify Permissions on Backup passwd Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd mediumCCE-83940-7

Verify Permissions on Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_backup_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83940-7

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232080, 6.1.2, SV-257896r925675_rule

Description
To properly set the permissions of /etc/passwd-, run the command:
$ sudo chmod 0644 /etc/passwd-
Rationale
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
OVAL test results details

Testing mode of /etc/passwd-  oval:ssg-test_file_permissions_backup_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_backup_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwd-oval:ssg-exclude_symlinks__backup_etc_passwd:ste:1oval:ssg-state_file_permissions_backup_etc_passwd_0_mode_0644or_stricter_:ste:1
Verify Permissions on Backup shadow Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow mediumCCE-83935-7

Verify Permissions on Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_backup_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83935-7

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232085, 6.1.6, SV-257897r925678_rule

Description
To properly set the permissions of /etc/shadow-, run the command:
$ sudo chmod 0000 /etc/shadow-
Rationale
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing mode of /etc/shadow-  oval:ssg-test_file_permissions_backup_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_backup_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadow-oval:ssg-exclude_symlinks__backup_etc_shadow:ste:1oval:ssg-state_file_permissions_backup_etc_shadow_0_mode_0000or_stricter_:ste:1
Verify Permissions on group Filexccdf_org.ssgproject.content_rule_file_permissions_etc_group mediumCCE-83934-0

Verify Permissions on group File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_group
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_group:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83934-0

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232055, 6.1.3, SV-257891r925660_rule

Description
To properly set the permissions of /etc/passwd, run the command:
$ sudo chmod 0644 /etc/passwd
Rationale
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
OVAL test results details

Testing mode of /etc/group  oval:ssg-test_file_permissions_etc_group_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_group_0:obj:1 of type file_object
FilepathFilterFilter
/etc/groupoval:ssg-exclude_symlinks__etc_group:ste:1oval:ssg-state_file_permissions_etc_group_0_mode_0644or_stricter_:ste:1
Verify Permissions on gshadow Filexccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow mediumCCE-83921-7

Verify Permissions on gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_gshadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83921-7

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232065, 6.1.7, SV-257893r925666_rule

Description
To properly set the permissions of /etc/gshadow, run the command:
$ sudo chmod 0000 /etc/gshadow
Rationale
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
OVAL test results details

Testing mode of /etc/gshadow  oval:ssg-test_file_permissions_etc_gshadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_gshadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/gshadowoval:ssg-exclude_symlinks__etc_gshadow:ste:1oval:ssg-state_file_permissions_etc_gshadow_0_mode_0000or_stricter_:ste:1
Verify Permissions on passwd Filexccdf_org.ssgproject.content_rule_file_permissions_etc_passwd mediumCCE-83931-6

Verify Permissions on passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_passwd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_passwd:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83931-6

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232075, 6.1.1, SV-257895r925672_rule

Description
To properly set the permissions of /etc/passwd, run the command:
$ sudo chmod 0644 /etc/passwd
Rationale
If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.
OVAL test results details

Testing mode of /etc/passwd  oval:ssg-test_file_permissions_etc_passwd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_passwd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/passwdoval:ssg-exclude_symlinks__etc_passwd:ste:1oval:ssg-state_file_permissions_etc_passwd_0_mode_0644or_stricter_:ste:1
Verify Permissions on shadow Filexccdf_org.ssgproject.content_rule_file_permissions_etc_shadow mediumCCE-83941-5

Verify Permissions on shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_shadow
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_shadow:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83941-5

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232270, 6.1.5, SV-257934r925789_rule

Description
To properly set the permissions of /etc/shadow, run the command:
$ sudo chmod 0000 /etc/shadow
Rationale
The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.
OVAL test results details

Testing mode of /etc/shadow  oval:ssg-test_file_permissions_etc_shadow_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_shadow_0:obj:1 of type file_object
FilepathFilterFilter
/etc/shadowoval:ssg-exclude_symlinks__etc_shadow:ste:1oval:ssg-state_file_permissions_etc_shadow_0_mode_0000or_stricter_:ste:1
Verify Group Who Owns /var/log Directoryxccdf_org.ssgproject.content_rule_file_groupowner_var_log mediumCCE-83912-6

Verify Group Who Owns /var/log Directory

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_var_log
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_var_log:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83912-6

References:  CCI-001314, SRG-OS-000206-GPOS-00084, SRG-APP-000118-CTR-000240, RHEL-09-232175, SV-257915r925732_rule

Description
To properly set the group owner of /var/log, run the command:
$ sudo chgrp root /var/log
Rationale
The /var/log directory contains files with logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing group ownership of /var/log/  oval:ssg-test_file_groupowner_var_log_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_var_log_0:obj:1 of type file_object
PathFilenameFilterFilter
/var/logno valueoval:ssg-symlink_file_groupowner_var_log_uid_0:ste:1oval:ssg-state_file_groupowner_var_log_gid_0_0:ste:1
Verify Group Who Owns /var/log/messages Filexccdf_org.ssgproject.content_rule_file_groupowner_var_log_messages mediumCCE-83916-7

Verify Group Who Owns /var/log/messages File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_var_log_messages
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_var_log_messages:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83916-7

References:  CCI-001314, SRG-OS-000206-GPOS-00084, RHEL-09-232185, SV-257917r925738_rule

Description
To properly set the group owner of /var/log/messages, run the command:
$ sudo chgrp root /var/log/messages
Rationale
The /var/log/messages file contains logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing group ownership of /var/log/messages  oval:ssg-test_file_groupowner_var_log_messages_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_var_log_messages_0:obj:1 of type file_object
FilepathFilterFilter
/var/log/messagesoval:ssg-symlink_file_groupowner_var_log_messages_uid_0:ste:1oval:ssg-state_file_groupowner_var_log_messages_gid_0_0:ste:1
Verify User Who Owns /var/log Directoryxccdf_org.ssgproject.content_rule_file_owner_var_log mediumCCE-83914-2

Verify User Who Owns /var/log Directory

Rule IDxccdf_org.ssgproject.content_rule_file_owner_var_log
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_var_log:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83914-2

References:  CCI-001314, SRG-OS-000206-GPOS-00084, SRG-APP-000118-CTR-000240, RHEL-09-232170, SV-257914r925729_rule

Description
To properly set the owner of /var/log, run the command:
$ sudo chown root /var/log 
Rationale
The /var/log directory contains files with logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing user ownership of /var/log/  oval:ssg-test_file_owner_var_log_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_var_log_0:obj:1 of type file_object
PathFilenameFilterFilter
/var/logno valueoval:ssg-symlink_file_owner_var_log_uid_0:ste:1oval:ssg-state_file_owner_var_log_uid_0_0:ste:1
Verify User Who Owns /var/log/messages Filexccdf_org.ssgproject.content_rule_file_owner_var_log_messages mediumCCE-83915-9

Verify User Who Owns /var/log/messages File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_var_log_messages
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_var_log_messages:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83915-9

References:  CCI-001314, SRG-OS-000206-GPOS-00084, RHEL-09-232180, SV-257916r925735_rule

Description
To properly set the owner of /var/log/messages, run the command:
$ sudo chown root /var/log/messages 
Rationale
The /var/log/messages file contains logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing user ownership of /var/log/messages  oval:ssg-test_file_owner_var_log_messages_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_var_log_messages_0:obj:1 of type file_object
FilepathFilterFilter
/var/log/messagesoval:ssg-symlink_file_owner_var_log_messages_uid_0:ste:1oval:ssg-state_file_owner_var_log_messages_uid_0_0:ste:1
Verify Permissions on /var/log Directoryxccdf_org.ssgproject.content_rule_file_permissions_var_log mediumCCE-83917-5

Verify Permissions on /var/log Directory

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_var_log
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_var_log:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83917-5

References:  CCI-001314, SRG-OS-000206-GPOS-00084, SRG-APP-000118-CTR-000240, RHEL-09-232025, SV-257885r925642_rule

Description
To properly set the permissions of /var/log, run the command:
$ sudo chmod 0755 /var/log
Rationale
The /var/log directory contains files with logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing mode of /var/log/  oval:ssg-test_file_permissions_var_log_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_var_log_0:obj:1 of type file_object
PathFilenameFilterFilter
/var/logno valueoval:ssg-exclude_symlinks__var_log:ste:1oval:ssg-state_file_permissions_var_log_0_mode_0755or_stricter_:ste:1
Verify Permissions on /var/log/messages Filexccdf_org.ssgproject.content_rule_file_permissions_var_log_messages mediumCCE-83913-4

Verify Permissions on /var/log/messages File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_var_log_messages
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_var_log_messages:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83913-4

References:  CCI-001314, SRG-OS-000206-GPOS-00084, RHEL-09-232030, SV-257886r925645_rule

Description
To properly set the permissions of /var/log/messages, run the command:
$ sudo chmod 0640 /var/log/messages
Rationale
The /var/log/messages file contains logs of error messages in the system and should only be accessed by authorized personnel.
OVAL test results details

Testing mode of /var/log/messages  oval:ssg-test_file_permissions_var_log_messages_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_var_log_messages_0:obj:1 of type file_object
FilepathFilterFilter
/var/log/messagesoval:ssg-exclude_symlinks__var_log_messages:ste:1oval:ssg-state_file_permissions_var_log_messages_0_mode_0640or_stricter_:ste:1
Verify that Shared Library Directories Have Root Group Ownershipxccdf_org.ssgproject.content_rule_dir_group_ownership_library_dirs mediumCCE-89858-5

Verify that Shared Library Directories Have Root Group Ownership

Rule IDxccdf_org.ssgproject.content_rule_dir_group_ownership_library_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-dir_group_ownership_library_dirs:def:1
Time2024-01-08T16:20:36+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89858-5

References:  CCI-001499, CM-5(6), CM-5(6).1, SRG-OS-000259-GPOS-00100, RHEL-09-232215, SV-257923r925756_rule

Description
System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are also stored in /lib/modules. All files in these directories should be group-owned by the root user. If the directories, is found to be owned by a user other than root correct its ownership with the following command:
$ sudo chgrp root DIR
Rationale
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Proper ownership of library directories is necessary to protect the integrity of the system.
OVAL test results details

Testing group ownership of /lib/  oval:ssg-test_file_groupownerdir_group_ownership_library_dirs_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerdir_group_ownership_library_dirs_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/libno valueoval:ssg-symlink_file_groupownerdir_group_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_groupownerdir_group_ownership_library_dirs_gid_0_0:ste:1

Testing group ownership of /lib64/  oval:ssg-test_file_groupownerdir_group_ownership_library_dirs_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerdir_group_ownership_library_dirs_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64no valueoval:ssg-symlink_file_groupownerdir_group_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_groupownerdir_group_ownership_library_dirs_gid_0_1:ste:1

Testing group ownership of /usr/lib/  oval:ssg-test_file_groupownerdir_group_ownership_library_dirs_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerdir_group_ownership_library_dirs_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/libno valueoval:ssg-symlink_file_groupownerdir_group_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_groupownerdir_group_ownership_library_dirs_gid_0_2:ste:1

Testing group ownership of /usr/lib64/  oval:ssg-test_file_groupownerdir_group_ownership_library_dirs_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerdir_group_ownership_library_dirs_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64no valueoval:ssg-symlink_file_groupownerdir_group_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_groupownerdir_group_ownership_library_dirs_gid_0_3:ste:1
Verify that Shared Library Directories Have Root Ownershipxccdf_org.ssgproject.content_rule_dir_ownership_library_dirs mediumCCE-89022-8

Verify that Shared Library Directories Have Root Ownership

Rule IDxccdf_org.ssgproject.content_rule_dir_ownership_library_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-dir_ownership_library_dirs:def:1
Time2024-01-08T16:20:36+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89022-8

References:  CCI-001499, CM-5(6), CM-5(6).1, SRG-OS-000259-GPOS-00100, RHEL-09-232210, SV-257922r925753_rule

Description
System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are also stored in /lib/modules. All files in these directories should be owned by the root user. If the directories, is found to be owned by a user other than root correct its ownership with the following command:
$ sudo chown root DIR
Rationale
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Proper ownership of library directories is necessary to protect the integrity of the system.
OVAL test results details

Testing user ownership of /lib/  oval:ssg-test_file_ownerdir_ownership_library_dirs_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerdir_ownership_library_dirs_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/libno valueoval:ssg-symlink_file_ownerdir_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownerdir_ownership_library_dirs_uid_0_0:ste:1

Testing user ownership of /lib64/  oval:ssg-test_file_ownerdir_ownership_library_dirs_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerdir_ownership_library_dirs_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64no valueoval:ssg-symlink_file_ownerdir_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownerdir_ownership_library_dirs_uid_0_1:ste:1

Testing user ownership of /usr/lib/  oval:ssg-test_file_ownerdir_ownership_library_dirs_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerdir_ownership_library_dirs_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/libno valueoval:ssg-symlink_file_ownerdir_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownerdir_ownership_library_dirs_uid_0_2:ste:1

Testing user ownership of /usr/lib64/  oval:ssg-test_file_ownerdir_ownership_library_dirs_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownerdir_ownership_library_dirs_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64no valueoval:ssg-symlink_file_ownerdir_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownerdir_ownership_library_dirs_uid_0_3:ste:1
Verify that Shared Library Directories Have Restrictive Permissionsxccdf_org.ssgproject.content_rule_dir_permissions_library_dirs mediumCCE-88693-7

Verify that Shared Library Directories Have Restrictive Permissions

Rule IDxccdf_org.ssgproject.content_rule_dir_permissions_library_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-dir_permissions_library_dirs:def:1
Time2024-01-08T16:20:36+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88693-7

References:  CCI-001499, CIP-003-8 R6, CM-5, CM-5(6), CM-5(6).1, SRG-OS-000259-GPOS-00100, RHEL-09-232015, SV-257883r925636_rule

Description
System-wide shared library directories, which contain are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are stored in /lib/modules. All sub-directories in these directories should not be group-writable or world-writable. If any file in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w DIR
Rationale
If the operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
OVAL test results details

Testing mode of /lib/  oval:ssg-test_file_permissionsdir_permissions_library_dirs_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsdir_permissions_library_dirs_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/libno valueoval:ssg-exclude_symlinks_dir_permissions_library_dirs:ste:1oval:ssg-state_file_permissionsdir_permissions_library_dirs_0_mode_7755or_stricter_:ste:1

Testing mode of /lib64/  oval:ssg-test_file_permissionsdir_permissions_library_dirs_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsdir_permissions_library_dirs_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64no valueoval:ssg-exclude_symlinks_dir_permissions_library_dirs:ste:1oval:ssg-state_file_permissionsdir_permissions_library_dirs_1_mode_7755or_stricter_:ste:1

Testing mode of /usr/lib/  oval:ssg-test_file_permissionsdir_permissions_library_dirs_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsdir_permissions_library_dirs_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/libno valueoval:ssg-exclude_symlinks_dir_permissions_library_dirs:ste:1oval:ssg-state_file_permissionsdir_permissions_library_dirs_2_mode_7755or_stricter_:ste:1

Testing mode of /usr/lib64/  oval:ssg-test_file_permissionsdir_permissions_library_dirs_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissionsdir_permissions_library_dirs_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64no valueoval:ssg-exclude_symlinks_dir_permissions_library_dirs:ste:1oval:ssg-state_file_permissionsdir_permissions_library_dirs_3_mode_7755or_stricter_:ste:1
Verify that system commands files are group owned by root or a system accountxccdf_org.ssgproject.content_rule_file_groupownership_system_commands_dirs mediumCCE-89442-8

Verify that system commands files are group owned by root or a system account

Rule IDxccdf_org.ssgproject.content_rule_file_groupownership_system_commands_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupownership_system_commands_dirs:def:1
Time2024-01-08T16:20:36+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89442-8

References:  CCI-001499, CM-5(6), CM-5(6).1, SRG-OS-000259-GPOS-00100, RHEL-09-232195, SV-257919r925744_rule

Description
System commands files are stored in the following directories by default:
/bin
/sbin
/usr/bin
/usr/sbin
/usr/local/bin
/usr/local/sbin
All files in these directories should be owned by the root group, or a system account. If the directory, or any file in these directories, is found to be owned by a group other than root or a a system account correct its ownership with the following command:
$ sudo chgrp root FILE
Rationale
If the operating system allows any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
OVAL test results details

system commands are owned by root or a system account  oval:ssg-test_groupownership_system_commands_dirs:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_groupownership_system_commands_dirs:obj:1 of type file_object
PathFilenameFilter
^\/s?bin|^\/usr\/s?bin|^\/usr\/local\/s?bin^.*$oval:ssg-state_groupowner_system_commands_dirs_not_root_or_system_account:ste:1
Verify that System Executables Have Root Ownershipxccdf_org.ssgproject.content_rule_file_ownership_binary_dirs mediumCCE-83908-4

Verify that System Executables Have Root Ownership

Rule IDxccdf_org.ssgproject.content_rule_file_ownership_binary_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_ownership_binary_dirs:def:1
Time2024-01-08T16:20:36+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83908-4

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001499, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-5(6), CM-5(6).1, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000259-GPOS-00100, RHEL-09-232190, SV-257918r925741_rule

Description
System executables are stored in the following directories by default:
/bin
/sbin
/usr/bin
/usr/libexec
/usr/local/bin
/usr/local/sbin
/usr/sbin
All files in these directories should be owned by the root user. If any file FILE in these directories is found to be owned by a user other than root, correct its ownership with the following command:
$ sudo chown root FILE
Rationale
System binaries are executed by privileged users as well as system services, and restrictive permissions are necessary to ensure that their execution of these programs cannot be co-opted.
OVAL test results details

binary directories uid root  oval:ssg-test_ownership_binary_directories:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_binary_directories:obj:1 of type file_object
PathFilenameFilter
^\/(|s)bin|^\/usr\/(|local\/)(|s)bin|^\/usr\/libexecno valueoval:ssg-state_owner_binaries_not_root:ste:1

binary files uid root  oval:ssg-test_ownership_binary_files:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_binary_files:obj:1 of type file_object
PathFilenameFilter
^\/(|s)bin|^\/usr\/(|local\/)(|s)bin|^\/usr\/libexec^.*$oval:ssg-state_owner_binaries_not_root:ste:1
Verify that Shared Library Files Have Root Ownershipxccdf_org.ssgproject.content_rule_file_ownership_library_dirs mediumCCE-83907-6

Verify that Shared Library Files Have Root Ownership

Rule IDxccdf_org.ssgproject.content_rule_file_ownership_library_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_ownership_library_dirs:def:1
Time2024-01-08T16:20:37+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83907-6

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001499, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-5(6), CM-5(6).1, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000259-GPOS-00100, RHEL-09-232200, SV-257920r925747_rule

Description
System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are also stored in /lib/modules. All files in these directories should be owned by the root user. If the directory, or any file in these directories, is found to be owned by a user other than root correct its ownership with the following command:
$ sudo chown root FILE
Rationale
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Proper ownership is necessary to protect the integrity of the system.
OVAL test results details

Testing user ownership of /lib/  oval:ssg-test_file_ownership_library_dirs_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_library_dirs_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib^.*$oval:ssg-symlink_file_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownership_library_dirs_uid_0_0:ste:1

Testing user ownership of /lib64/  oval:ssg-test_file_ownership_library_dirs_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_library_dirs_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64^.*$oval:ssg-symlink_file_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownership_library_dirs_uid_0_1:ste:1

Testing user ownership of /usr/lib/  oval:ssg-test_file_ownership_library_dirs_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_library_dirs_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib^.*$oval:ssg-symlink_file_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownership_library_dirs_uid_0_2:ste:1

Testing user ownership of /usr/lib64/  oval:ssg-test_file_ownership_library_dirs_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_ownership_library_dirs_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64^.*$oval:ssg-symlink_file_ownership_library_dirs_uid_0:ste:1oval:ssg-state_file_ownership_library_dirs_uid_0_3:ste:1
Verify that System Executables Have Restrictive Permissionsxccdf_org.ssgproject.content_rule_file_permissions_binary_dirs mediumCCE-83911-8

Verify that System Executables Have Restrictive Permissions

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_binary_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_binary_dirs:def:1
Time2024-01-08T16:20:37+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83911-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001499, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-5(6), CM-5(6).1, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000259-GPOS-00100, RHEL-09-232010, SV-257882r925633_rule

Description
System executables are stored in the following directories by default:
/bin
/sbin
/usr/bin
/usr/libexec
/usr/local/bin
/usr/local/sbin
/usr/sbin
All files in these directories should not be group-writable or world-writable. If any file FILE in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE
Rationale
System binaries are executed by privileged users, as well as system services, and restrictive permissions are necessary to ensure execution of these programs cannot be co-opted.
OVAL test results details

binary files go-w  oval:ssg-test_perms_binary_files:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_binary_files:obj:1 of type file_object
PathFilenameFilterFilter
^\/(|s)bin|^\/usr\/(|local\/)(|s)bin|^\/usr\/libexec^.*$oval:ssg-state_perms_binary_files_nogroupwrite_noworldwrite:ste:1oval:ssg-state_perms_binary_files_symlink:ste:1
Verify that Shared Library Files Have Restrictive Permissionsxccdf_org.ssgproject.content_rule_file_permissions_library_dirs mediumCCE-83909-2

Verify that Shared Library Files Have Restrictive Permissions

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_library_dirs
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_library_dirs:def:1
Time2024-01-08T16:20:38+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83909-2

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001499, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), CM-5(6), CM-5(6).1, AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000259-GPOS-00100, RHEL-09-232020, SV-257884r925639_rule

Description
System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are stored in /lib/modules. All files in these directories should not be group-writable or world-writable. If any file in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE
Rationale
Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Restrictive permissions are necessary to protect the integrity of the system.
OVAL test results details

Testing mode of /lib/  oval:ssg-test_file_permissions_library_dirs_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_library_dirs_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib^.*$oval:ssg-exclude_symlinks__library_dirs:ste:1oval:ssg-state_file_permissions_library_dirs_0_mode_7755or_stricter_:ste:1

Testing mode of /lib64/  oval:ssg-test_file_permissions_library_dirs_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_library_dirs_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64^.*$oval:ssg-exclude_symlinks__library_dirs:ste:1oval:ssg-state_file_permissions_library_dirs_1_mode_7755or_stricter_:ste:1

Testing mode of /usr/lib/  oval:ssg-test_file_permissions_library_dirs_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_library_dirs_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib^.*$oval:ssg-exclude_symlinks__library_dirs:ste:1oval:ssg-state_file_permissions_library_dirs_2_mode_7755or_stricter_:ste:1

Testing mode of /usr/lib64/  oval:ssg-test_file_permissions_library_dirs_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_library_dirs_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64^.*$oval:ssg-exclude_symlinks__library_dirs:ste:1oval:ssg-state_file_permissions_library_dirs_3_mode_7755or_stricter_:ste:1
Verify the system-wide library files in directories "/lib", "/lib64", "/usr/lib/" and "/usr/lib64" are group-owned by root.xccdf_org.ssgproject.content_rule_root_permissions_syslibrary_files mediumCCE-87108-7

Verify the system-wide library files in directories "/lib", "/lib64", "/usr/lib/" and "/usr/lib64" are group-owned by root.

Rule IDxccdf_org.ssgproject.content_rule_root_permissions_syslibrary_files
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-root_permissions_syslibrary_files:def:1
Time2024-01-08T16:20:39+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87108-7

References:  CCI-001499, CM-5(6), CM-5(6).1, SRG-OS-000259-GPOS-00100, RHEL-09-232205, SV-257921r925750_rule

Description
System-wide library files are stored in the following directories by default:
/lib
/lib64
/usr/lib
/usr/lib64
All system-wide shared library files should be protected from unauthorised access. If any of these files is not group-owned by root, correct its group-owner with the following command:
$ sudo chgrp root FILE
Rationale
If the operating system were to allow any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process. This requirement applies to operating systems with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs which execute with escalated privileges. Only qualified and authorized individuals must be allowed to obtain access to information system components for purposes of initiating changes, including upgrades and modifications.
OVAL test results details

Testing group ownership of /lib/  oval:ssg-test_file_groupownerroot_permissions_syslibrary_files_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerroot_permissions_syslibrary_files_0:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib^.*$oval:ssg-symlink_file_groupownerroot_permissions_syslibrary_files_uid_0:ste:1oval:ssg-state_file_groupownerroot_permissions_syslibrary_files_gid_0_0:ste:1

Testing group ownership of /lib64/  oval:ssg-test_file_groupownerroot_permissions_syslibrary_files_1:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerroot_permissions_syslibrary_files_1:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/lib64^.*$oval:ssg-symlink_file_groupownerroot_permissions_syslibrary_files_uid_0:ste:1oval:ssg-state_file_groupownerroot_permissions_syslibrary_files_gid_0_1:ste:1

Testing group ownership of /usr/lib/  oval:ssg-test_file_groupownerroot_permissions_syslibrary_files_2:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerroot_permissions_syslibrary_files_2:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib^.*$oval:ssg-symlink_file_groupownerroot_permissions_syslibrary_files_uid_0:ste:1oval:ssg-state_file_groupownerroot_permissions_syslibrary_files_gid_0_2:ste:1

Testing group ownership of /usr/lib64/  oval:ssg-test_file_groupownerroot_permissions_syslibrary_files_3:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupownerroot_permissions_syslibrary_files_3:obj:1 of type file_object
BehaviorsPathFilenameFilterFilter
no value/usr/lib64^.*$oval:ssg-symlink_file_groupownerroot_permissions_syslibrary_files_uid_0:ste:1oval:ssg-state_file_groupownerroot_permissions_syslibrary_files_gid_0_3:ste:1
Ensure All World-Writable Directories Are Owned by root Userxccdf_org.ssgproject.content_rule_dir_perms_world_writable_root_owned mediumCCE-83903-5

Ensure All World-Writable Directories Are Owned by root User

Rule IDxccdf_org.ssgproject.content_rule_dir_perms_world_writable_root_owned
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-dir_perms_world_writable_root_owned:def:1
Time2024-01-08T16:20:31+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83903-5

References:  BP28(R40), CCI-000366, SRG-OS-000480-GPOS-00227, SRG-OS-000138-GPOS-00069, RHEL-09-232240, SV-257928r925771_rule

Description
All directories in local partitions which are world-writable should be owned by root. If any world-writable directories are not owned by root, this should be investigated. Following this, the files should be deleted or assigned to root user.
Rationale
Allowing a user account to own a world-writable directory is undesirable because it allows the owner of that directory to remove or replace any files that may be placed in the directory by other users.
OVAL test results details

check for local directories that are world writable and have uid greater than 0  oval:ssg-test_dir_world_writable_uid_gt_zero:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-all_local_directories_uid_zero:obj:1 of type file_object
BehaviorsPathFilenameFilter
no value/no valueoval:ssg-state_uid_is_not_root_and_world_writable:ste:1
Verify that All World-Writable Directories Have Sticky Bits Setxccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits mediumCCE-83895-3

Verify that All World-Writable Directories Have Sticky Bits Set

Rule IDxccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-dir_perms_world_writable_sticky_bits:def:1
Time2024-01-08T16:20:32+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83895-3

References:  BP28(R40), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001090, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000138-GPOS-00069, RHEL-09-232245, 6.1.12, SV-257929r925774_rule

Description
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command:
$ sudo chmod +t DIR
Rationale
Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.
OVAL test results details

all local world-writable directories have sticky bit set  oval:ssg-test_dir_perms_world_writable_sticky_bits:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_only_local_directories:obj:1 of type file_object
BehaviorsPathFilenameFilter
no value/no valueoval:ssg-state_world_writable_and_not_sticky:ste:1
Verify Permissions on /etc/audit/auditd.confxccdf_org.ssgproject.content_rule_file_permissions_etc_audit_auditd mediumCCE-89284-4

Verify Permissions on /etc/audit/auditd.conf

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_audit_auditd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_audit_auditd:def:1
Time2024-01-08T16:20:32+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89284-4

References:  CCI-000171, AU-12(b), SRG-OS-000063-GPOS-00032, RHEL-09-653115, SV-258172r926503_rule

Description
To properly set the permissions of /etc/audit/auditd.conf, run the command:
$ sudo chmod 0640 /etc/audit/auditd.conf
Rationale
Without the capability to restrict the roles and individuals that can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
OVAL test results details

Testing mode of /etc/audit/auditd.conf  oval:ssg-test_file_permissions_etc_audit_auditd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_audit_auditd_0:obj:1 of type file_object
FilepathFilterFilter
/etc/audit/auditd.confoval:ssg-exclude_symlinks__etc_audit_auditd:ste:1oval:ssg-state_file_permissions_etc_audit_auditd_0_mode_0640or_stricter_:ste:1
Verify Permissions on /etc/audit/rules.d/*.rulesxccdf_org.ssgproject.content_rule_file_permissions_etc_audit_rulesd mediumCCE-89977-3

Verify Permissions on /etc/audit/rules.d/*.rules

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_audit_rulesd
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_etc_audit_rulesd:def:1
Time2024-01-08T16:20:32+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89977-3

References:  CCI-000171, AU-12(b), SRG-OS-000063-GPOS-00032, RHEL-09-653110, SV-258171r926500_rule

Description
To properly set the permissions of /etc/audit/rules.d/*.rules, run the command:
$ sudo chmod 0640 /etc/audit/rules.d/*.rules
Rationale
Without the capability to restrict the roles and individuals that can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
OVAL test results details

Testing mode of /etc/audit/rules.d/  oval:ssg-test_file_permissions_etc_audit_rulesd_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_etc_audit_rulesd_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/audit/rules.d^.*rules$oval:ssg-exclude_symlinks__etc_audit_rulesd:ste:1oval:ssg-state_file_permissions_etc_audit_rulesd_0_mode_0640or_stricter_:ste:1
Ensure All Files Are Owned by a Groupxccdf_org.ssgproject.content_rule_file_permissions_ungroupowned mediumCCE-83906-8

Ensure All Files Are Owned by a Group

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_ungroupowned
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_ungroupowned:def:1
Time2024-01-08T16:20:33+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83906-8

References:  BP28(R55), 1, 11, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.06, DSS06.10, CCI-000366, CCI-002165, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, PR.PT-3, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232250, 6.1.11, SV-257930r925777_rule

Description
If any files are not owned by a group, then the cause of their lack of group-ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate group. The following command will discover and print any files on local partitions which do not belong to a valid group:
$ df --local -P | awk '{if (NR!=1) print $6}' | sudo xargs -I '{}' find '{}' -xdev -nogroup
To search all filesystems on a system including network mounted filesystems the following command can be run manually for each partition:
$ sudo find PARTITION -xdev -nogroup
Rationale
Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.
Warnings
warning  This rule only considers local groups. If you have your groups defined outside /etc/group, the rule won't consider those.
OVAL test results details

files with no group owner  oval:ssg-test_file_permissions_ungroupowned:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/dev/ttyS2character special0180rw-rw---- 
/dev/ttyS1character special0180rw-rw---- 
/dev/ttyS0character special0180rw-rw---- 
/dev/ptmxcharacter special050rw-rw-rw- 
/dev/tty62character special050rw--w---- 
/dev/tty61character special050rw--w---- 
/dev/tty60character special050rw--w---- 
/dev/tty59character special050rw--w---- 
/dev/tty58character special050rw--w---- 
/dev/tty57character special050rw--w---- 
/dev/ttyS3character special0180rw-rw---- 
/dev/vcsa2character special050rw-rw---- 
/dev/vcsa5character special050rw-rw---- 
/dev/vcsu5character special050rw-rw---- 
/dev/vcs5character special050rw-rw---- 
/dev/vcsa4character special050rw-rw---- 
/dev/vcsu4character special050rw-rw---- 
/dev/tty9character special050rw--w---- 
/dev/tty8character special050rw--w---- 
/dev/tty7character special050rw--w---- 
/dev/tty6character special050rw--w---- 
/dev/tty5character special050rw--w---- 
/dev/tty4character special050rw--w---- 
/dev/tty3character special050rw--w---- 
/dev/tty2character special050rw--w---- 
/dev/tty1character special100050rw--w---- 
/dev/vcsa1character special050rw-rw---- 
/dev/vcsu1character special050rw-rw---- 
/dev/vcs1character special050rw-rw---- 
/dev/vcsacharacter special050rw-rw---- 
/dev/vcsucharacter special050rw-rw---- 
/dev/vcscharacter special050rw-rw---- 
/dev/tty0character special050rw--w---- 
/dev/consolecharacter special050rw--w---- 
/dev/ttycharacter special050rw-rw-rw- 
/dev/portcharacter special090rw-r----- 
/dev/vcsu6character special050rw-rw---- 
/dev/vcs6character special050rw-rw---- 
/sysroot/ostree/deploy/rhel/var/spool/mail/coreregular1000120rw-rw---- 
/dev/dri/card0character special0390rw-rw---- 
/dev/dri/renderD128character special09970rw-rw-rw- 
/dev/snd/controlC0character special0630rw-rw---- 
/dev/snd/hwC0D0character special0630rw-rw---- 
/dev/snd/pcmC0D0ccharacter special0630rw-rw---- 
/dev/snd/pcmC0D0pcharacter special0630rw-rw---- 
/dev/snd/seqcharacter special0630rw-rw---- 
/dev/snd/timercharacter special0630rw-rw---- 
/dev/tty36character special050rw--w---- 
/dev/tty35character special050rw--w---- 
/dev/tty34character special050rw--w---- 
/dev/tty33character special050rw--w---- 
/dev/tty32character special050rw--w---- 
/dev/tty31character special050rw--w---- 
/dev/tty30character special050rw--w---- 
/dev/tty29character special050rw--w---- 
/dev/tty28character special050rw--w---- 
/dev/tty27character special050rw--w---- 
/dev/tty26character special050rw--w---- 
/dev/tty25character special050rw--w---- 
/dev/tty24character special050rw--w---- 
/dev/tty23character special050rw--w---- 
/dev/tty22character special050rw--w---- 
/dev/tty21character special050rw--w---- 
/dev/tty20character special050rw--w---- 
/dev/tty19character special050rw--w---- 
/dev/tty18character special050rw--w---- 
/dev/tty17character special050rw--w---- 
/dev/tty16character special050rw--w---- 
/dev/tty15character special050rw--w---- 
/dev/tty14character special050rw--w---- 
/dev/tty13character special050rw--w---- 
/dev/tty12character special050rw--w---- 
/dev/tty11character special050rw--w---- 
/dev/tty10character special050rw--w---- 
/dev/vcsu3character special050rw-rw---- 
/dev/vda2block special060rw-rw---- 
/dev/vda1block special060rw-rw---- 
/dev/vdablock special060rw-rw---- 
/dev/tty56character special050rw--w---- 
/dev/tty55character special050rw--w---- 
/dev/tty54character special050rw--w---- 
/dev/tty53character special050rw--w---- 
/dev/tty52character special050rw--w---- 
/dev/tty51character special050rw--w---- 
/dev/tty50character special050rw--w---- 
/dev/tty49character special050rw--w---- 
/dev/tty48character special050rw--w---- 
/dev/tty47character special050rw--w---- 
/dev/tty46character special050rw--w---- 
/dev/tty45character special050rw--w---- 
/dev/tty44character special050rw--w---- 
/dev/tty43character special050rw--w---- 
/dev/tty42character special050rw--w---- 
/dev/tty41character special050rw--w---- 
/dev/tty40character special050rw--w---- 
/dev/tty39character special050rw--w---- 
/dev/tty38character special050rw--w---- 
/dev/tty37character special050rw--w---- 
/dev/kvmcharacter special0360rw-rw-rw- 
/dev/fb0character special0390rw-rw---- 
... and 144 more items.
Ensure All Files Are Owned by a Userxccdf_org.ssgproject.content_rule_no_files_unowned_by_user mediumCCE-83896-1

Ensure All Files Are Owned by a User

Rule IDxccdf_org.ssgproject.content_rule_no_files_unowned_by_user
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-no_files_unowned_by_user:def:1
Time2024-01-08T16:20:35+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83896-1

References:  BP28(R55), 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, CCI-000366, CCI-002165, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232255, 6.1.10, SV-257931r925780_rule

Description
If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. The following command will discover and print any files on local partitions which do not belong to a valid user:
$ df --local -P | awk {'if (NR!=1) print $6'} | sudo xargs -I '{}' find '{}' -xdev -nouser
To search all filesystems on a system including network mounted filesystems the following command can be run manually for each partition:
$ sudo find PARTITION -xdev -nouser
Rationale
Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.
Warnings
warning  For this rule to evaluate centralized user accounts, getent must be working properly so that running the command
getent passwd
returns a list of all users in your organization. If using the System Security Services Daemon (SSSD),
enumerate = true
must be configured in your organization's domain to return a complete list of users
warning  Enabling this rule will result in slower scan times depending on the size of your organization and number of centralized users.
OVAL test results details

Check user ids on all files on the system  oval:ssg-no_files_unowned_by_user_test:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-file_permissions_unowned_object:obj:1 of type file_object
BehaviorsPathFilenameFilter
no value/.*oval:ssg-file_permissions_unowned_userid_list_match:ste:1
Disable the Automounterxccdf_org.ssgproject.content_rule_service_autofs_disabled mediumCCE-83850-8

Disable the Automounter

Rule IDxccdf_org.ssgproject.content_rule_service_autofs_disabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_autofs_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83850-8

References:  1, 12, 15, 16, 5, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.4.6, CCI-000366, CCI-000778, CCI-001958, 164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, RHEL-09-231040, SV-257849r925534_rule

Description
The autofs daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default configuration provides the cdrom device as /misc/cd. However, this method of providing access to removable media is not common, so autofs can almost always be disabled if NFS is not in use. Even if NFS is required, it may be possible to configure filesystem mounts statically by editing /etc/fstab rather than relying on the automounter.

The autofs service can be disabled with the following command:
$ sudo systemctl mask --now autofs.service
Rationale
Disabling the automounter permits the administrator to statically control filesystem mounting through /etc/fstab.

Additionally, automatically mounting filesystems permits easy introduction of unknown devices, thereby facilitating malicious activity.
OVAL test results details

package autofs is removed  oval:ssg-test_service_autofs_package_autofs_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_service_autofs_package_autofs_removed:obj:1 of type rpminfo_object
Name
autofs

Test that the autofs service is not running  oval:ssg-test_service_not_running_autofs:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_service_not_running_autofs:obj:1 of type systemdunitproperty_object
UnitProperty
^autofs\.(service|socket)$ActiveState

Test that the property LoadState from the service autofs is masked  oval:ssg-test_service_loadstate_is_masked_autofs:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_service_loadstate_is_masked_autofs:obj:1 of type systemdunitproperty_object
UnitProperty
^autofs\.(service|socket)$LoadState
Disable Mounting of cramfsxccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled lowCCE-83853-2

Disable Mounting of cramfs

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_cramfs_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83853-2

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000095-GPOS-00049, RHEL-09-231195, SV-257880r925627_rule

Description
To configure the system to prevent the cramfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/cramfs.conf:
install cramfs /bin/true
This effectively prevents usage of this uncommon filesystem. The cramfs filesystem type is a compressed read-only Linux filesystem embedded in small footprint systems. A cramfs image can be used without having to first decompress the image.
Rationale
Removing support for unneeded filesystem types reduces the local attack surface of the server.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install cramfs" /etc/modprobe.d/cramfs.conf ; then
	
	sed -i 's#^install cramfs.*#install cramfs /bin/true#g' /etc/modprobe.d/cramfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/cramfs.conf
	echo "install cramfs /bin/true" >> /etc/modprobe.d/cramfs.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist cramfs$" /etc/modprobe.d/cramfs.conf ; then
	echo "blacklist cramfs" >> /etc/modprobe.d/cramfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'cramfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/cramfs.conf
    regexp: install\s+cramfs
    line: install cramfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83853-2
  - DISA-STIG-RHEL-09-231195
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_cramfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

- name: Ensure kernel module 'cramfs' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/cramfs.conf
    regexp: ^blacklist cramfs$
    line: blacklist cramfs
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83853-2
  - DISA-STIG-RHEL-09-231195
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_cramfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20cramfs%20/bin/true%0Ablacklist%20cramfs%0A
        mode: 0644
        path: /etc/modprobe.d/cramfs.conf
        overwrite: true
OVAL test results details

kernel module cramfs blacklisted  oval:ssg-test_kernmod_cramfs_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_cramfs_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+cramfs$1

kernel module cramfs disabled  oval:ssg-test_kernmod_cramfs_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_cramfs_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+cramfs\s+(/bin/false|/bin/true)$1
Disable Modprobe Loading of USB Storage Driverxccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled mediumCCE-83851-6

Disable Modprobe Loading of USB Storage Driver

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-kernel_module_usb-storage_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83851-6

References:  A.15.SEC-RHEL1, 1, 12, 15, 16, 5, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.21, CCI-000366, CCI-000778, CCI-001958, 164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, RHEL-09-291010, 1.1.9, SV-258034r926089_rule

Description
To prevent USB storage devices from being used, configure the kernel module loading system to prevent automatic loading of the USB storage driver. To configure the system to prevent the usb-storage kernel module from being loaded, add the following line to the file /etc/modprobe.d/usb-storage.conf:
install usb-storage /bin/true
This will prevent the modprobe program from loading the usb-storage module, but will not prevent an administrator (or another program) from using the insmod program to load the module manually.
Rationale
USB storage devices such as thumb drives can be used to introduce malicious software.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install usb-storage" /etc/modprobe.d/usb-storage.conf ; then
	
	sed -i 's#^install usb-storage.*#install usb-storage /bin/true#g' /etc/modprobe.d/usb-storage.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/usb-storage.conf
	echo "install usb-storage /bin/true" >> /etc/modprobe.d/usb-storage.conf
fi

if ! LC_ALL=C grep -q -m 1 "^blacklist usb-storage$" /etc/modprobe.d/usb-storage.conf ; then
	echo "blacklist usb-storage" >> /etc/modprobe.d/usb-storage.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'usb-storage' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/usb-storage.conf
    regexp: install\s+usb-storage
    line: install usb-storage /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83851-6
  - DISA-STIG-RHEL-09-291010
  - NIST-800-171-3.1.21
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - kernel_module_usb-storage_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

- name: Ensure kernel module 'usb-storage' is blacklisted
  lineinfile:
    create: true
    dest: /etc/modprobe.d/usb-storage.conf
    regexp: ^blacklist usb-storage$
    line: blacklist usb-storage
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83851-6
  - DISA-STIG-RHEL-09-291010
  - NIST-800-171-3.1.21
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - kernel_module_usb-storage_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,install%20usb-storage%20/bin/true%0Ablacklist%20usb-storage%0A
        mode: 0644
        path: /etc/modprobe.d/usb-storage.conf
        overwrite: true
OVAL test results details

kernel module usb-storage blacklisted  oval:ssg-test_kernmod_usb-storage_blacklisted:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_usb-storage_blacklisted:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^blacklist\s+usb-storage$1

kernel module usb-storage disabled  oval:ssg-test_kernmod_usb-storage_disabled:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_kernmod_usb-storage_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/modprobe.d
/etc/modules-load.d
/run/modprobe.d
/run/modules-load.d
/usr/lib/modprobe.d
/usr/lib/modules-load.d
^.*\.conf$^\s*install\s+usb-storage\s+(/bin/false|/bin/true)$1
Add nosuid Option to /boot/efixccdf_org.ssgproject.content_rule_mount_option_boot_efi_nosuid mediumCCE-86040-3

Add nosuid Option to /boot/efi

Rule IDxccdf_org.ssgproject.content_rule_mount_option_boot_efi_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86040-3

References:  CCI-000366, CM-6(b), CM-6.1(iv), SRG-OS-000480-GPOS-00227, RHEL-09-231105, SV-257862r925573_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /boot/efi. The SUID and SGID permissions should not be required on the boot partition. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /boot/efi.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from boot partitions.
Add nodev Option to /bootxccdf_org.ssgproject.content_rule_mount_option_boot_nodev mediumCCE-83884-7

Add nodev Option to /boot

Rule IDxccdf_org.ssgproject.content_rule_mount_option_boot_nodev
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_boot_nodev:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83884-7

References:  CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231095, SV-257860r925567_rule

Description
The nodev mount option can be used to prevent device files from being created in /boot. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /boot.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Reboot:false
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" "/boot")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/boot' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /boot in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /boot)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /boot  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/boot"; then
        if mountpoint -q "/boot"; then
            mount -o remount --target "/boot"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add nodev Option to /boot: Check information associated to mountpoint'
  command: findmnt --fstab '/boot'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83884-7
  - DISA-STIG-RHEL-09-231095
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /boot: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83884-7
  - DISA-STIG-RHEL-09-231095
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /boot: If /boot not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /boot
    - ''
    - ''
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83884-7
  - DISA-STIG-RHEL-09-231095
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /boot: Make sure nodev option is part of the to /boot
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-83884-7
  - DISA-STIG-RHEL-09-231095
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /boot: Ensure /boot is mounted with nodev option'
  mount:
    path: /boot
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-83884-7
  - DISA-STIG-RHEL-09-231095
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nodev
  - no_reboot_needed

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /boot --mountoptions="nodev"
OVAL test results details

nodev on /boot   oval:ssg-test_boot_partition_nodev_optional:tst:1  false

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/boot/dev/vda1c8a14e89-490f-4dcf-9f42-319f43dbccfaxfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind24576060044185716

/boot exists  oval:ssg-test_boot_partition_nodev_optional_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/boot/dev/vda1c8a14e89-490f-4dcf-9f42-319f43dbccfaxfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind24576060044185716

nodev on /boot in /etc/fstab  oval:ssg-test_boot_partition_nodev_optional_in_fstab:tst:1  false

Following items have been found on the system:
PathContent
/etc/fstabUUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa /boot xfs defaults

/boot exists in /etc/fstab  oval:ssg-test_boot_partition_nodev_optional_exist_in_fstab:tst:1  true

Following items have been found on the system:
PathContent
/etc/fstabUUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa /boot xfs defaults
Add nosuid Option to /bootxccdf_org.ssgproject.content_rule_mount_option_boot_nosuid mediumCCE-83877-1

Add nosuid Option to /boot

Rule IDxccdf_org.ssgproject.content_rule_mount_option_boot_nosuid
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_boot_nosuid:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83877-1

References:  BP28(R12), CCI-000366, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, SRG-OS-000480-GPOS-00227, RHEL-09-231100, SV-257861r925570_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /boot. The SUID and SGID permissions should not be required on the boot partition. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /boot.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from boot partitions.

Reboot:false
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" "/boot")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/boot' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /boot in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /boot)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /boot  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/boot"; then
        if mountpoint -q "/boot"; then
            mount -o remount --target "/boot"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add nosuid Option to /boot: Check information associated to mountpoint'
  command: findmnt --fstab '/boot'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83877-1
  - DISA-STIG-RHEL-09-231100
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /boot: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83877-1
  - DISA-STIG-RHEL-09-231100
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /boot: If /boot not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /boot
    - ''
    - ''
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83877-1
  - DISA-STIG-RHEL-09-231100
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /boot: Make sure nosuid option is part of the to /boot
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - CCE-83877-1
  - DISA-STIG-RHEL-09-231100
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /boot: Ensure /boot is mounted with nosuid option'
  mount:
    path: /boot
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-83877-1
  - DISA-STIG-RHEL-09-231100
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_boot_nosuid
  - no_reboot_needed

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /boot --mountoptions="nosuid"
OVAL test results details

nosuid on /boot   oval:ssg-test_boot_partition_nosuid_optional:tst:1  false

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/boot/dev/vda1c8a14e89-490f-4dcf-9f42-319f43dbccfaxfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind24576060044185716

/boot exists  oval:ssg-test_boot_partition_nosuid_optional_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/boot/dev/vda1c8a14e89-490f-4dcf-9f42-319f43dbccfaxfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind24576060044185716

nosuid on /boot in /etc/fstab  oval:ssg-test_boot_partition_nosuid_optional_in_fstab:tst:1  false

Following items have been found on the system:
PathContent
/etc/fstabUUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa /boot xfs defaults

/boot exists in /etc/fstab  oval:ssg-test_boot_partition_nosuid_optional_exist_in_fstab:tst:1  true

Following items have been found on the system:
PathContent
/etc/fstabUUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa /boot xfs defaults
Add nodev Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev mediumCCE-83881-3

Add nodev Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_dev_shm_nodev:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83881-3

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231110, 1.1.8.2, SV-257863r925576_rule

Description
The nodev mount option can be used to prevent creation of device files in /dev/shm. Legitimate character and block devices should not exist within temporary directories like /dev/shm. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Reboot:false
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add nodev Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83881-3
  - DISA-STIG-RHEL-09-231110
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83881-3
  - DISA-STIG-RHEL-09-231110
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: If /dev/shm not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83881-3
  - DISA-STIG-RHEL-09-231110
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Make sure nodev option is part of the to /dev/shm
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-83881-3
  - DISA-STIG-RHEL-09-231110
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Ensure /dev/shm is mounted with nodev option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-83881-3
  - DISA-STIG-RHEL-09-231110
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed
OVAL test results details

nodev on /dev/shm   oval:ssg-test_dev_shm_partition_nodev_expected:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

/dev/shm exists  oval:ssg-test_dev_shm_partition_nodev_expected_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

nodev on /dev/shm in /etc/fstab  oval:ssg-test_dev_shm_partition_nodev_expected_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_dev_shm_partition_nodev_expected_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/dev/shm[\s]+[\S]+[\s]+([\S]+)1
Add noexec Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec mediumCCE-83857-3

Add noexec Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_dev_shm_noexec:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83857-3

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231115, 1.1.8.3, SV-257864r925579_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /dev/shm. It can be dangerous to allow the execution of binaries from world-writable temporary storage directories such as /dev/shm. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale
Allowing users to execute binaries from world-writable directories such as /dev/shm can expose the system to potential compromise.

Reboot:false
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add noexec Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83857-3
  - DISA-STIG-RHEL-09-231115
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83857-3
  - DISA-STIG-RHEL-09-231115
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83857-3
  - DISA-STIG-RHEL-09-231115
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Make sure noexec option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - CCE-83857-3
  - DISA-STIG-RHEL-09-231115
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Ensure /dev/shm is mounted with noexec option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-83857-3
  - DISA-STIG-RHEL-09-231115
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed
OVAL test results details

noexec on /dev/shm   oval:ssg-test_dev_shm_partition_noexec_expected:tst:1  false

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

/dev/shm exists  oval:ssg-test_dev_shm_partition_noexec_expected_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

noexec on /dev/shm in /etc/fstab  oval:ssg-test_dev_shm_partition_noexec_expected_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_dev_shm_partition_noexec_expected_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/dev/shm[\s]+[\S]+[\s]+([\S]+)1
Add nosuid Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid mediumCCE-83891-2

Add nosuid Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_dev_shm_nosuid:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83891-2

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231120, 1.1.8.4, SV-257865r925582_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /dev/shm. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.

Reboot:false
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type="tmpfs"
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add nosuid Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83891-2
  - DISA-STIG-RHEL-09-231120
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83891-2
  - DISA-STIG-RHEL-09-231120
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83891-2
  - DISA-STIG-RHEL-09-231120
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Make sure nosuid option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - CCE-83891-2
  - DISA-STIG-RHEL-09-231120
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Ensure /dev/shm is mounted with nosuid option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - CCE-83891-2
  - DISA-STIG-RHEL-09-231120
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed
OVAL test results details

nosuid on /dev/shm   oval:ssg-test_dev_shm_partition_nosuid_expected:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

/dev/shm exists  oval:ssg-test_dev_shm_partition_nosuid_expected_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/dev/shmtmpfstmpfsrwseclabelnosuidnodevinode644668650466865

nosuid on /dev/shm in /etc/fstab  oval:ssg-test_dev_shm_partition_nosuid_expected_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_dev_shm_partition_nosuid_expected_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/dev/shm[\s]+[\S]+[\s]+([\S]+)1
Add nodev Option to /homexccdf_org.ssgproject.content_rule_mount_option_home_nodev unknownCCE-83871-4

Add nodev Option to /home

Rule IDxccdf_org.ssgproject.content_rule_mount_option_home_nodev
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severityunknown
Identifiers and References

Identifiers:  CCE-83871-4

References:  BP28(R12), SRG-OS-000368-GPOS-00154, RHEL-09-231045, 1.1.7.2, SV-257850r925537_rule

Description
The nodev mount option can be used to prevent device files from being created in /home. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /home.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Add noexec Option to /homexccdf_org.ssgproject.content_rule_mount_option_home_noexec mediumCCE-83875-5

Add noexec Option to /home

Rule IDxccdf_org.ssgproject.content_rule_mount_option_home_noexec
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_home_noexec:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83875-5

References:  BP28(R12), CCI-000366, CM-6(b), SRG-OS-000480-GPOS-00227, RHEL-09-231055, SV-257852r925543_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /home. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /home.
Rationale
The /home directory contains data of individual users. Binaries in this directory should not be considered as trusted and users should not be able to execute them.
OVAL test results details

noexec on /home   oval:ssg-test_home_partition_noexec_optional:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_home_partition_noexec_optional:obj:1 of type partition_object
Mount point
/home

/home exists  oval:ssg-test_home_partition_noexec_optional_exist:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_home_partition_noexec_optional:obj:1 of type partition_object
Mount point
/home

noexec on /home in /etc/fstab  oval:ssg-test_home_partition_noexec_optional_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_home_partition_noexec_optional_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/home[\s]+[\S]+[\s]+([\S]+)1

/home exists in /etc/fstab  oval:ssg-test_home_partition_noexec_optional_exist_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_home_partition_noexec_optional_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/home[\s]+[\S]+[\s]+([\S]+)1
Add nosuid Option to /homexccdf_org.ssgproject.content_rule_mount_option_home_nosuid mediumCCE-83894-6

Add nosuid Option to /home

Rule IDxccdf_org.ssgproject.content_rule_mount_option_home_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83894-6

References:  BP28(R28), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, SRG-OS-000480-GPOS-00227, RHEL-09-231050, 1.1.7.3, SV-257851r925540_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /home. The SUID and SGID permissions should not be required in these user data directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /home.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from user home directory partitions.
Add nodev Option to Non-Root Local Partitionsxccdf_org.ssgproject.content_rule_mount_option_nodev_nonroot_local_partitions mediumCCE-83873-0

Add nodev Option to Non-Root Local Partitions

Rule IDxccdf_org.ssgproject.content_rule_mount_option_nodev_nonroot_local_partitions
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_nodev_nonroot_local_partitions:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83873-0

References:  BP28(R12), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-3, SRG-OS-000368-GPOS-00154, SRG-OS-000480-GPOS-00227, RHEL-09-231200, SV-257881r925630_rule

Description
The nodev mount option prevents files from being interpreted as character or block devices. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any non-root local partitions.
Rationale
The nodev mount option prevents files from being interpreted as character or block devices. The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails, for which it is not advised to set nodev on these filesystems.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

MOUNT_OPTION="nodev"
# Create array of local non-root partitions
readarray -t partitions_records < <(findmnt --mtab --raw --evaluate | grep "^/\w" | grep "\s/dev/\w")

# Create array of polyinstantiated directories, in case one of them is found in mtab
readarray -t polyinstantiated_dirs < \
    <(grep -oP "^\s*[^#\s]+\s+\S+" /etc/security/namespace.conf | grep -oP "(?<=\s)\S+?(?=/?\$)")


for partition_record in "${partitions_records[@]}"; do
    # Get all important information for fstab
    mount_point="$(echo ${partition_record} | cut -d " " -f1)"
    device="$(echo ${partition_record} | cut -d " " -f2)"
    device_type="$(echo ${partition_record} | cut -d " " -f3)"
    if ! printf '%s\0' "${polyinstantiated_dirs[@]}" | grep -qxzF "$mount_point"; then
        # device and device_type will be used only in case when the device doesn't have fstab record
        mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" $mount_point)"

        # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
        if ! grep "$mount_point_match_regexp" /etc/fstab; then
            # runtime opts without some automatic kernel/userspace-added defaults
            previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                        | sed -E "s/(rw|defaults|seclabel|$MOUNT_OPTION)(,|$)//g;s/,$//")
            [ "$previous_mount_opts" ] && previous_mount_opts+=","
            # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
            # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
            fs_type="$device_type"
            if [  "$fs_type" == "iso9660" ] ; then
                previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
            fi
            echo "$device $mount_point $device_type defaults,${previous_mount_opts}$MOUNT_OPTION 0 0" >> /etc/fstab
        # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
        elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "$MOUNT_OPTION"; then
            previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
            sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,$MOUNT_OPTION|" /etc/fstab
        fi
        if mkdir -p "$mount_point"; then
            if mountpoint -q "$mount_point"; then
                mount -o remount --target "$mount_point"
            fi
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: Ensure non-root local partitions are mounted with nodev option
  mount:
    path: '{{ item.mount }}'
    src: '{{ item.device }}'
    opts: '{{ item.options }},nodev'
    state: mounted
    fstype: '{{ item.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - item.mount is match('/\w')
  - item.options is not search('nodev')
  with_items:
  - '{{ ansible_facts.mounts }}'
  tags:
  - CCE-83873-0
  - DISA-STIG-RHEL-09-231200
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_nodev_nonroot_local_partitions
  - no_reboot_needed
OVAL test results details

nodev on local filesystems  oval:ssg-test_nodev_nonroot_local_partitions:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/var/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646614949774
/usr/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsroseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646614949774
/sysroot/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646614949774
/boot/dev/vda1c8a14e89-490f-4dcf-9f42-319f43dbccfaxfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind24576060044185716
Add nodev Option to Removable Media Partitionsxccdf_org.ssgproject.content_rule_mount_option_nodev_removable_partitions mediumCCE-83856-5

Add nodev Option to Removable Media Partitions

Rule IDxccdf_org.ssgproject.content_rule_mount_option_nodev_removable_partitions
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_nodev_removable_partitions:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83856-5

References:  11, 12, 13, 14, 16, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.03, DSS06.06, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.7.1.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, A.9.2.1, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.AC-3, PR.AC-6, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-231085, SV-257858r925561_rule

Description
The nodev mount option prevents files from being interpreted as character or block devices. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. An exception to this is chroot jails, and it is not advised to set nodev on partitions which contain their root filesystems.
OVAL test results details

Check if expected removable partitions truly exist on the system  oval:ssg-test_removable_partition_doesnt_exist:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/dev/cdromsymbolic link003rwxrwxrwx 

Check if removable partition variable value represents CD/DVD drive  oval:ssg-test_var_removable_partition_is_cd_dvd_drive:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_removable_partition:var:1/dev/cdrom

'nodev' mount option used for at least one CD / DVD drive alternative names in /etc/fstab  oval:ssg-test_nodev_etc_fstab_cd_dvd_drive:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_nodev_etc_fstab_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/dvd[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/scd0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/sr0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

'CD/DVD drive is not listed in /etc/fstab  oval:ssg-test_no_cd_dvd_drive_in_etc_fstab:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_cd_dvd_drive_in_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

Check if removable partition is configured with 'nodev' mount option in /etc/fstab  oval:ssg-test_nodev_etc_fstab_not_cd_dvd_drive:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nodev_etc_fstab_not_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/etc/fstab1
Add noexec Option to Removable Media Partitionsxccdf_org.ssgproject.content_rule_mount_option_noexec_removable_partitions mediumCCE-83883-9

Add noexec Option to Removable Media Partitions

Rule IDxccdf_org.ssgproject.content_rule_mount_option_noexec_removable_partitions
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_noexec_removable_partitions:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83883-9

References:  11, 12, 13, 14, 16, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.03, DSS06.06, CCI-000087, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.7.1.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, A.9.2.1, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.AC-3, PR.AC-6, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-231080, SV-257857r925558_rule

Description
The noexec mount option prevents the direct execution of binaries on the mounted filesystem. Preventing the direct execution of binaries from removable media (such as a USB key) provides a defense against malicious software that may be present on such untrusted media. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.
Rationale
Allowing users to execute binaries from removable media such as USB keys exposes the system to potential compromise.
OVAL test results details

Check if expected removable partitions truly exist on the system  oval:ssg-test_removable_partition_doesnt_exist:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/dev/cdromsymbolic link003rwxrwxrwx 

Check if removable partition variable value represents CD/DVD drive  oval:ssg-test_var_removable_partition_is_cd_dvd_drive:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_removable_partition:var:1/dev/cdrom

'noexec' mount option used for at least one CD / DVD drive alternative names in /etc/fstab  oval:ssg-test_noexec_etc_fstab_cd_dvd_drive:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_noexec_etc_fstab_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/dvd[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/scd0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/sr0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

'CD/DVD drive is not listed in /etc/fstab  oval:ssg-test_no_cd_dvd_drive_in_etc_fstab:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_cd_dvd_drive_in_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

Check if removable partition is configured with 'noexec' mount option in /etc/fstab  oval:ssg-test_noexec_etc_fstab_not_cd_dvd_drive:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_noexec_etc_fstab_not_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/etc/fstab1
Add nosuid Option to Removable Media Partitionsxccdf_org.ssgproject.content_rule_mount_option_nosuid_removable_partitions mediumCCE-83874-8

Add nosuid Option to Removable Media Partitions

Rule IDxccdf_org.ssgproject.content_rule_mount_option_nosuid_removable_partitions
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_nosuid_removable_partitions:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83874-8

References:  11, 12, 13, 14, 15, 16, 18, 3, 5, 8, 9, APO01.06, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.06, DSS05.07, DSS06.02, DSS06.03, DSS06.06, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.AC-3, PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-231090, SV-257859r925564_rule

Description
The nosuid mount option prevents set-user-identifier (SUID) and set-group-identifier (SGID) permissions from taking effect. These permissions allow users to execute binaries with the same permissions as the owner and group of the file respectively. Users should not be allowed to introduce SUID and SGID files into the system via partitions mounted from removeable media. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Allowing users to introduce SUID or SGID binaries from partitions mounted off of removable media would allow them to introduce their own highly-privileged programs.
OVAL test results details

Check if expected removable partitions truly exist on the system  oval:ssg-test_removable_partition_doesnt_exist:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/dev/cdromsymbolic link003rwxrwxrwx 

Check if removable partition variable value represents CD/DVD drive  oval:ssg-test_var_removable_partition_is_cd_dvd_drive:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_removable_partition:var:1/dev/cdrom

'nosuid' mount option used for at least one CD / DVD drive alternative names in /etc/fstab  oval:ssg-test_nosuid_etc_fstab_cd_dvd_drive:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_nosuid_etc_fstab_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/dvd[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/scd0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
^[\s]*/dev/sr0[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

'CD/DVD drive is not listed in /etc/fstab  oval:ssg-test_no_cd_dvd_drive_in_etc_fstab:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_cd_dvd_drive_in_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/dev/cdrom
/dev/dvd
/dev/scd0
/dev/sr0
/etc/fstab1

Check if removable partition is configured with 'nosuid' mount option in /etc/fstab  oval:ssg-test_nosuid_etc_fstab_not_cd_dvd_drive:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nosuid_etc_fstab_not_cd_dvd_drive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^[\s]*/dev/cdrom[\s]+[/\w]+[\s]+[\w]+[\s]+([^\s]+)(?:[\s]+[\d]+){2}$
/dev/cdrom
/etc/fstab1
Add nodev Option to /tmpxccdf_org.ssgproject.content_rule_mount_option_tmp_nodev mediumCCE-83869-8

Add nodev Option to /tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_tmp_nodev
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83869-8

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231125, 1.1.2.2, SV-257866r925585_rule

Description
The nodev mount option can be used to prevent device files from being created in /tmp. Legitimate character and block devices should not exist within temporary directories like /tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Add noexec Option to /tmpxccdf_org.ssgproject.content_rule_mount_option_tmp_noexec mediumCCE-83885-4

Add noexec Option to /tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_tmp_noexec
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83885-4

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231130, 1.1.2.3, SV-257867r925588_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale
Allowing users to execute binaries from world-writable directories such as /tmp should never be necessary in normal operation and can expose the system to potential compromise.
Add nosuid Option to /tmpxccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid mediumCCE-83872-2

Add nosuid Option to /tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83872-2

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231135, 1.1.2.4, SV-257868r925591_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.
Add nodev Option to /var/log/auditxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_nodev mediumCCE-83882-1

Add nodev Option to /var/log/audit

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_nodev
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83882-1

References:  CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231160, 1.1.6.3, SV-257873r925606_rule

Description
The nodev mount option can be used to prevent device files from being created in /var/log/audit. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var/log/audit.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Add noexec Option to /var/log/auditxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_noexec mediumCCE-83878-9

Add noexec Option to /var/log/audit

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_noexec
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83878-9

References:  CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231165, 1.1.6.2, SV-257874r925609_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /var/log/audit. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /var/log/audit.
Rationale
Allowing users to execute binaries from directories containing audit log files such as /var/log/audit should never be necessary in normal operation and can expose the system to potential compromise.
Add nosuid Option to /var/log/auditxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_nosuid mediumCCE-83893-8

Add nosuid Option to /var/log/audit

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_audit_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83893-8

References:  CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231170, 1.1.6.4, SV-257875r925612_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /var/log/audit. The SUID and SGID permissions should not be required in directories containing audit log files. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /var/log/audit.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from partitions designated for audit log files.
Add nodev Option to /var/logxccdf_org.ssgproject.content_rule_mount_option_var_log_nodev mediumCCE-83886-2

Add nodev Option to /var/log

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_nodev
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83886-2

References:  CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231145, 1.1.5.2, SV-257870r925597_rule

Description
The nodev mount option can be used to prevent device files from being created in /var/log. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var/log.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Add noexec Option to /var/logxccdf_org.ssgproject.content_rule_mount_option_var_log_noexec mediumCCE-83887-0

Add noexec Option to /var/log

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_noexec
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83887-0

References:  BP28(R12), CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231150, 1.1.5.3, SV-257871r925600_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /var/log. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /var/log.
Rationale
Allowing users to execute binaries from directories containing log files such as /var/log should never be necessary in normal operation and can expose the system to potential compromise.
Add nosuid Option to /var/logxccdf_org.ssgproject.content_rule_mount_option_var_log_nosuid mediumCCE-83870-6

Add nosuid Option to /var/log

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_log_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83870-6

References:  BP28(R12), CCI-001764, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231155, 1.1.5.4, SV-257872r925603_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /var/log. The SUID and SGID permissions should not be required in directories containing log files. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /var/log.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from partitions designated for log files.
Add nodev Option to /varxccdf_org.ssgproject.content_rule_mount_option_var_nodev mediumCCE-83868-0

Add nodev Option to /var

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_nodev
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_var_nodev:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83868-0

References:  CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, RHEL-09-231140, 1.1.3.2, SV-257869r925594_rule

Description
The nodev mount option can be used to prevent device files from being created in /var. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Reboot:false
# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var" > /dev/null || findmnt --fstab "/var" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" "/var")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[^#].*[[:space:]]%s[[:space:]]" /var)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        # In iso9660 filesystems mtab could describe a "blocksize" value, this should be reflected in
        # fstab as "block".  The next variable is to satisfy shellcheck SC2050.
        fs_type=""
        if [  "$fs_type" == "iso9660" ] ; then
            previous_mount_opts=$(sed 's/blocksize=/block=/' <<< "$previous_mount_opts")
        fi
        echo " /var  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/var"; then
        if mountpoint -q "/var"; then
            mount -o remount --target "/var"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:high
Reboot:false
Strategy:configure
- name: 'Add nodev Option to /var: Check information associated to mountpoint'
  command: findmnt --fstab '/var'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - CCE-83868-0
  - DISA-STIG-RHEL-09-231140
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - CCE-83868-0
  - DISA-STIG-RHEL-09-231140
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var: If /var not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - CCE-83868-0
  - DISA-STIG-RHEL-09-231140
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var: Make sure nodev option is part of the to /var options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - CCE-83868-0
  - DISA-STIG-RHEL-09-231140
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var: Ensure /var is mounted with nodev option'
  mount:
    path: /var
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - CCE-83868-0
  - DISA-STIG-RHEL-09-231140
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_nodev
  - no_reboot_needed

Complexity:low
Disruption:high
Reboot:false
Strategy:enable

part /var --mountoptions="nodev"
OVAL test results details

nodev on /var   oval:ssg-test_var_partition_nodev_optional:tst:1  false

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/var/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646614949774

/var exists  oval:ssg-test_var_partition_nodev_optional_exist:tst:1  true

Following items have been found on the system:
Mount pointDeviceUuidFs typeMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsMount optionsTotal spaceSpace usedSpace left
/var/dev/vda33113fc7b-df72-47fc-aca7-cf3765882f24xfsrwseclabelrelatimeattr2inode64logbufs=8logbsize=32knoquotabind1546624051646614949774

nodev on /var in /etc/fstab  oval:ssg-test_var_partition_nodev_optional_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_var_partition_nodev_optional_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/var[\s]+[\S]+[\s]+([\S]+)1

/var exists in /etc/fstab  oval:ssg-test_var_partition_nodev_optional_exist_in_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_var_partition_nodev_optional_in_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^[\s]*(?!#)[\S]+[\s]+/var[\s]+[\S]+[\s]+([\S]+)1
Add nodev Option to /var/tmpxccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev mediumCCE-83864-9

Add nodev Option to /var/tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83864-9

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, RHEL-09-231175, 1.1.4.4, SV-257876r925615_rule

Description
The nodev mount option can be used to prevent device files from being created in /var/tmp. Legitimate character and block devices should not exist within temporary directories like /var/tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Add noexec Option to /var/tmpxccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec mediumCCE-83866-4

Add noexec Option to /var/tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83866-4

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, RHEL-09-231180, 1.1.4.2, SV-257877r925618_rule

Description
The noexec mount option can be used to prevent binaries from being executed out of /var/tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale
Allowing users to execute binaries from world-writable directories such as /var/tmp should never be necessary in normal operation and can expose the system to potential compromise.
Add nosuid Option to /var/tmpxccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid mediumCCE-83863-1

Add nosuid Option to /var/tmp

Rule IDxccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83863-1

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, RHEL-09-231185, 1.1.4.3, SV-257878r925621_rule

Description
The nosuid mount option can be used to prevent execution of setuid programs in /var/tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.
Disable acquiring, saving, and processing core dumpsxccdf_org.ssgproject.content_rule_service_systemd-coredump_disabled mediumCCE-83974-6

Disable acquiring, saving, and processing core dumps

Rule IDxccdf_org.ssgproject.content_rule_service_systemd-coredump_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-service_systemd-coredump_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83974-6

References:  CCI-000366, SC-7(10), FMT_SMF_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-213100, SV-257815r925432_rule

Description
The systemd-coredump.socket unit is a socket activation of the systemd-coredump@.service which processes core dumps. By masking the unit, core dump processing is disabled.
Rationale
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SOCKET_NAME="systemd-coredump.socket"
SYSTEMCTL_EXEC='/usr/bin/systemctl'

if "$SYSTEMCTL_EXEC" -q list-unit-files --type socket | grep -q "$SOCKET_NAME"; then
    "$SYSTEMCTL_EXEC" stop "$SOCKET_NAME"
    "$SYSTEMCTL_EXEC" mask "$SOCKET_NAME"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:disable
- name: Disable acquiring, saving, and processing core dumps - Collect systemd Socket
    Units Present in the System
  ansible.builtin.command:
    cmd: systemctl -q list-unit-files --type socket
  register: result_systemd_unit_files
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83974-6
  - DISA-STIG-RHEL-09-213100
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_systemd-coredump_disabled

- name: Disable acquiring, saving, and processing core dumps - Ensure systemd-coredump.socket
    is Masked
  ansible.builtin.systemd:
    name: systemd-coredump.socket
    state: stopped
    enabled: false
    masked: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - result_systemd_unit_files.stdout_lines is search("systemd-coredump.socket")
  tags:
  - CCE-83974-6
  - DISA-STIG-RHEL-09-213100
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_systemd-coredump_disabled
OVAL test results details

Test that the property LoadState from the systemd-coredump.socket is masked  oval:ssg-test_socket_loadstate_is_masked_systemd-coredump:tst:1  false

Following items have been found on the system:
UnitPropertyValue
systemd-coredump.socketLoadStateloaded
Disable core dump backtracesxccdf_org.ssgproject.content_rule_coredump_disable_backtraces mediumCCE-83984-5

Disable core dump backtraces

Rule IDxccdf_org.ssgproject.content_rule_coredump_disable_backtraces
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-coredump_disable_backtraces:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83984-5

References:  CCI-000366, CM-6, FMT_SMF_EXT.1, Req-3.2, 3.3.1.1, 3.3.1.2, 3.3.1.3, SRG-OS-000480-GPOS-00227, RHEL-09-213085, 1.5.2, SV-257812r925423_rule

Description
The ProcessSizeMax option in [Coredump] section of /etc/systemd/coredump.conf specifies the maximum size in bytes of a core which will be processed. Core dumps exceeding this size may be stored, but the backtrace will not be generated.
Rationale
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems. Enabling core dumps on production systems is not recommended, however there may be overriding operational requirements to enable advanced debuging. Permitting temporary enablement of core dumps during such situations should be reviewed through local needs and policy.
Warnings
warning  If the /etc/systemd/coredump.conf file does not already contain the [Coredump] section, the value will not be configured correctly.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q systemd; then

if [ -e "/etc/systemd/coredump.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ProcessSizeMax\s*=\s*/Id" "/etc/systemd/coredump.conf"
else
    touch "/etc/systemd/coredump.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/coredump.conf"

cp "/etc/systemd/coredump.conf" "/etc/systemd/coredump.conf.bak"
# Insert at the end of the file
printf '%s\n' "ProcessSizeMax=0" >> "/etc/systemd/coredump.conf"
# Clean up after ourselves.
rm "/etc/systemd/coredump.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83984-5
  - DISA-STIG-RHEL-09-213085
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - coredump_disable_backtraces
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable core dump backtraces
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*ProcessSizeMax\s*=\s*
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/coredump.conf
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*ProcessSizeMax\s*=\s*
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/coredump.conf
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*ProcessSizeMax\s*=\s*
      line: ProcessSizeMax=0
      state: present
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-83984-5
  - DISA-STIG-RHEL-09-213085
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - coredump_disable_backtraces
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20%20This%20file%20is%20part%20of%20systemd.%0A%23%0A%23%20%20systemd%20is%20free%20software%3B%20you%20can%20redistribute%20it%20and/or%20modify%20it%0A%23%20%20under%20the%20terms%20of%20the%20GNU%20Lesser%20General%20Public%20License%20as%20published%20by%0A%23%20%20the%20Free%20Software%20Foundation%3B%20either%20version%202.1%20of%20the%20License%2C%20or%0A%23%20%20%28at%20your%20option%29%20any%20later%20version.%0A%23%0A%23%20Entries%20in%20this%20file%20show%20the%20compile%20time%20defaults.%0A%23%20You%20can%20change%20settings%20by%20editing%20this%20file.%0A%23%20Defaults%20can%20be%20restored%20by%20simply%20deleting%20this%20file.%0A%23%0A%23%20See%20coredump.conf%285%29%20for%20details.%0A%0A%5BCoredump%5D%0A%23Storage%3Dexternal%0A%23Compress%3Dyes%0A%23ProcessSizeMax%3D2G%0A%23ExternalSizeMax%3D2G%0A%23JournalSizeMax%3D767M%0A%23MaxUse%3D%0A%23KeepFree%3D%0AStorage%3Dnone%0AProcessSizeMax%3D0%0A
        mode: 0644
        path: /etc/systemd/coredump.conf
        overwrite: true
OVAL test results details

tests the value of ProcessSizeMax setting in the /etc/systemd/coredump.conf file  oval:ssg-test_coredump_disable_backtraces:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_coredump_disable_backtraces:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/systemd/coredump.conf^\s*\[Coredump\].*(?:\n\s*[^[\s].*)*\n^[ \t]*(?i)ProcessSizeMax(?-i)[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1

tests the value of ProcessSizeMax setting in the /etc/systemd/coredump.conf.d file  oval:ssg-test_coredump_disable_backtraces_config_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_coredump_disable_backtraces_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/systemd/coredump.conf.d.*\.conf$^\s*\[Coredump\].*(?:\n\s*[^[\s].*)*\n^[ \t]*(?i)ProcessSizeMax(?-i)[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1
Disable storing core dumpxccdf_org.ssgproject.content_rule_coredump_disable_storage mediumCCE-83979-5

Disable storing core dump

Rule IDxccdf_org.ssgproject.content_rule_coredump_disable_storage
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-coredump_disable_storage:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83979-5

References:  CCI-000366, CM-6, FMT_SMF_EXT.1, Req-3.2, 3.3.1.1, 3.3.1.2, 3.3.1.3, SRG-OS-000480-GPOS-00227, RHEL-09-213090, 1.5.1, SV-257813r925426_rule

Description
The Storage option in [Coredump] sectionof /etc/systemd/coredump.conf can be set to none to disable storing core dumps permanently.
Rationale
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems. Enabling core dumps on production systems is not recommended, however there may be overriding operational requirements to enable advanced debuging. Permitting temporary enablement of core dumps during such situations should be reviewed through local needs and policy.
Warnings
warning  If the /etc/systemd/coredump.conf file does not already contain the [Coredump] section, the value will not be configured correctly.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q systemd; then

if [ -e "/etc/systemd/coredump.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*Storage\s*=\s*/Id" "/etc/systemd/coredump.conf"
else
    touch "/etc/systemd/coredump.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/coredump.conf"

cp "/etc/systemd/coredump.conf" "/etc/systemd/coredump.conf.bak"
# Insert at the end of the file
printf '%s\n' "Storage=none" >> "/etc/systemd/coredump.conf"
# Clean up after ourselves.
rm "/etc/systemd/coredump.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83979-5
  - DISA-STIG-RHEL-09-213090
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - coredump_disable_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable storing core dump
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*Storage\s*=\s*
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/coredump.conf
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*Storage\s*=\s*
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/coredump.conf
    lineinfile:
      path: /etc/systemd/coredump.conf
      create: false
      regexp: ^\s*Storage\s*=\s*
      line: Storage=none
      state: present
  when: '"systemd" in ansible_facts.packages'
  tags:
  - CCE-83979-5
  - DISA-STIG-RHEL-09-213090
  - NIST-800-53-CM-6
  - PCI-DSS-Req-3.2
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - coredump_disable_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20%20This%20file%20is%20part%20of%20systemd.%0A%23%0A%23%20%20systemd%20is%20free%20software%3B%20you%20can%20redistribute%20it%20and/or%20modify%20it%0A%23%20%20under%20the%20terms%20of%20the%20GNU%20Lesser%20General%20Public%20License%20as%20published%20by%0A%23%20%20the%20Free%20Software%20Foundation%3B%20either%20version%202.1%20of%20the%20License%2C%20or%0A%23%20%20%28at%20your%20option%29%20any%20later%20version.%0A%23%0A%23%20Entries%20in%20this%20file%20show%20the%20compile%20time%20defaults.%0A%23%20You%20can%20change%20settings%20by%20editing%20this%20file.%0A%23%20Defaults%20can%20be%20restored%20by%20simply%20deleting%20this%20file.%0A%23%0A%23%20See%20coredump.conf%285%29%20for%20details.%0A%0A%5BCoredump%5D%0A%23Storage%3Dexternal%0A%23Compress%3Dyes%0A%23ProcessSizeMax%3D2G%0A%23ExternalSizeMax%3D2G%0A%23JournalSizeMax%3D767M%0A%23MaxUse%3D%0A%23KeepFree%3D%0AStorage%3Dnone%0AProcessSizeMax%3D0%0A
        mode: 0644
        path: /etc/systemd/coredump.conf
        overwrite: true
OVAL test results details

tests the value of Storage setting in the /etc/systemd/coredump.conf file  oval:ssg-test_coredump_disable_storage:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_coredump_disable_storage:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/systemd/coredump.conf^\s*\[Coredump\].*(?:\n\s*[^[\s].*)*\n^[ \t]*(?i)Storage(?-i)[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1

tests the value of Storage setting in the /etc/systemd/coredump.conf.d file  oval:ssg-test_coredump_disable_storage_config_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_coredump_disable_storage_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/systemd/coredump.conf.d.*\.conf$^\s*\[Coredump\].*(?:\n\s*[^[\s].*)*\n^[ \t]*(?i)Storage(?-i)[ \t]*=[ \t]*(.+?)[ \t]*(?:$|#)1
Disable Core Dumps for All Usersxccdf_org.ssgproject.content_rule_disable_users_coredumps mediumCCE-83980-3

Disable Core Dumps for All Users

Rule IDxccdf_org.ssgproject.content_rule_disable_users_coredumps
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-disable_users_coredumps:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83980-3

References:  1, 12, 13, 15, 16, 2, 7, 8, APO13.01, BAI04.04, DSS01.03, DSS03.05, DSS05.07, CCI-000366, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.17.2.1, CM-6, SC-7(10), DE.CM-1, PR.DS-4, 3.3.1.1, 3.3.1.2, 3.3.1.3, SRG-OS-000480-GPOS-00227, RHEL-09-213095, SV-257814r925429_rule

Description
To disable core dumps for all users, add the following line to /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory:
*     hard   core    0
Rationale
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"

if grep -qE '^\s*\*\s+hard\s+core' $SECURITY_LIMITS_FILE; then
        sed -ri 's/(hard\s+core\s+)[[:digit:]]+/\1 0/' $SECURITY_LIMITS_FILE
else
        echo "*     hard   core    0" >> $SECURITY_LIMITS_FILE
fi

if ls /etc/security/limits.d/*.conf > /dev/null; then
        sed -ri '/^\s*\*\s+hard\s+core/d' /etc/security/limits.d/*.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83980-3
  - DISA-STIG-RHEL-09-213095
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable core dumps with limits
  lineinfile:
    dest: /etc/security/limits.conf
    regexp: ^[^#].*core
    line: '*        hard       core      0'
    create: true
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-83980-3
  - DISA-STIG-RHEL-09-213095
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%2A%20%20%20%20%20hard%20%20%20core%20%20%20%200
        mode: 0644
        path: /etc/security/limits.d/75-disable_users_coredumps.conf
        overwrite: true
OVAL test results details

Tests the value of the ^[\s]*\*[\s]+(hard|-)[\s]+core[\s]+([\d]+) setting in the /etc/security/limits.d directory  oval:ssg-test_core_dumps_limits_d:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_core_dumps_limits_d:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/security/limits.d^.*\.conf$^[\s]*\*[\s]+(?:hard|-)[\s]+core[\s]+([\d]+)1

Tests for existance of the ^[\s]*\*[\s]+(hard|-)[\s]+core setting in the /etc/security/limits.d directory  oval:ssg-test_core_dumps_limits_d_exists:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_core_dumps_limits_d_exists:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/security/limits.d^.*\.conf$^[\s]*\*[\s]+(?:hard|-)[\s]+core1

Tests the value of the ^[\s]*\*[\s]+(hard|-)[\s]+core[\s]+([\d]+) setting in the /etc/security/limits.conf file  oval:ssg-test_core_dumps_limitsconf:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_core_dumps_limitsconf:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/security/limits.conf^[\s]*\*[\s]+(?:hard|-)[\s]+core[\s]+([\d]+)1
Enable ExecShield via sysctlxccdf_org.ssgproject.content_rule_sysctl_kernel_exec_shield mediumCCE-83970-4

Enable ExecShield via sysctl

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_exec_shield
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_exec_shield:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83970-4

References:  12, 15, 8, APO13.01, DSS05.02, 3.1.7, CCI-002530, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, SC-39, CM-6(a), PR.PT-4, SRG-OS-000433-GPOS-00192, RHEL-09-213110, SV-257817r925438_rule

Description
By default on Red Hat Enterprise Linux 9 64-bit systems, ExecShield is enabled and can only be disabled if the hardware does not support ExecShield or is disabled in /etc/default/grub.
Rationale
ExecShield uses the segmentation feature on all x86 systems to prevent execution in memory higher than a certain address. It writes an address as a limit in the code segment descriptor, to control where code can be executed, on a per-process basis. When the kernel places a process's memory regions such as the stack and heap higher than this address, the hardware prevents execution in that address range. This is enabled by default on the latest Red Hat and Fedora systems if supported by the hardware.
OVAL test results details

64 bit architecture  oval:ssg-test_system_info_architecture_x86_64:tst:1  true

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppc_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_ppcle_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_aarch_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

64 bit architecture  oval:ssg-test_system_info_architecture_s390_64:tst:1  false

Following items have been found on the system:
Machine classNode nameOs nameOs releaseOs versionProcessor type
x86_64localhost.localdomainLinux5.14.0-362.13.1.el9_3.x86_64#1 SMP PREEMPT_DYNAMIC Fri Nov 24 01:57:57 EST 2023x86_64

NX is disabled  oval:ssg-test_nx_disabled_grub:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_nx_disabled_grub:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/boot/grub2/grub.cfg[\s]*noexec[\s]*=[\s]*off1
Restrict Exposed Kernel Pointer Addresses Accessxccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict mediumCCE-83972-0

Restrict Exposed Kernel Pointer Addresses Access

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_kptr_restrict
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_kptr_restrict:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83972-0

References:  BP28(R23), CCI-002824, CCI-000366, CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4, SC-30, SC-30(2), SC-30(5), CM-6(a), SRG-OS-000132-GPOS-00067, SRG-OS-000433-GPOS-00192, SRG-OS-000480-GPOS-00227, RHEL-09-213025, SV-257800r925387_rule

Description
To set the runtime status of the kernel.kptr_restrict kernel parameter, run the following command:
$ sudo sysctl -w kernel.kptr_restrict=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.kptr_restrict = 1
Rationale
Exposing kernel pointers (through procfs or seq_printf()) exposes kernel writeable structures which may contain functions pointers. If a write vulnerability occurs in the kernel, allowing write access to any of this structure, the kernel can be compromised. This option disallow any program without the CAP_SYSLOG capability to get the addresses of kernel pointers by replacing them with 0.
OVAL test results details

kernel.kptr_restrict static configuration  oval:ssg-test_sysctl_kernel_kptr_restrict_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_kptr_restrict:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_kptr_restrict:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_kptr_restrict:obj:1

kernel.kptr_restrict static configuration  oval:ssg-test_sysctl_kernel_kptr_restrict_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_kptr_restrict:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_kptr_restrict:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_kptr_restrict:obj:1

kernel.kptr_restrict static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_kptr_restrict_static_pkg_correct:tst:1  true

Following items have been found on the system:
PathContent
/usr/lib/sysctl.d/50-redhat.confkernel.kptr_restrict = 1

kernel runtime parameter kernel.kptr_restrict set to 1 or 2  oval:ssg-test_sysctl_kernel_kptr_restrict_runtime:tst:1  true

Following items have been found on the system:
NameValue
kernel.kptr_restrict1
Enable Randomized Layout of Virtual Address Spacexccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space mediumCCE-83971-2

Enable Randomized Layout of Virtual Address Space

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_randomize_va_space:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83971-2

References:  BP28(R23), 3.1.7, CCI-000366, CCI-002824, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4, SC-30, SC-30(2), CM-6(a), Req-2.2.1, 2.2.3, SRG-OS-000433-GPOS-00193, SRG-OS-000480-GPOS-00227, SRG-APP-000450-CTR-001105, RHEL-09-213070, 1.5.3, SV-257809r925414_rule

Description
To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command:
$ sudo sysctl -w kernel.randomize_va_space=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.randomize_va_space = 2
Rationale
Address space layout randomization (ASLR) makes it more difficult for an attacker to predict the location of attack code they have introduced into a process's address space during an attempt at exploitation. Additionally, ASLR makes it more difficult for an attacker to know the location of existing code in order to re-purpose it using return oriented programming (ROP) techniques.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space="2"

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83971-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.randomize_va_space.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83971-2
  - DISA-STIG-RHEL-09-213070
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Comment out any occurrences of kernel.randomize_va_space from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.randomize_va_space
    replace: '#kernel.randomize_va_space'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83971-2
  - DISA-STIG-RHEL-09-213070
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Ensure sysctl kernel.randomize_va_space is set to 2
  sysctl:
    name: kernel.randomize_va_space
    value: '2'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83971-2
  - DISA-STIG-RHEL-09-213070
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.randomize_va_space%3D2%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_randomize_va_space.conf
        overwrite: true
OVAL test results details

kernel.randomize_va_space static configuration  oval:ssg-test_sysctl_kernel_randomize_va_space_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_randomize_va_space:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_randomize_va_space:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_randomize_va_space:obj:1

kernel.randomize_va_space static configuration  oval:ssg-test_sysctl_kernel_randomize_va_space_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_randomize_va_space:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_randomize_va_space:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_randomize_va_space:obj:1

kernel.randomize_va_space static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_randomize_va_space_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_kernel_randomize_va_space:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*kernel.randomize_va_space[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter kernel.randomize_va_space set to 2  oval:ssg-test_sysctl_kernel_randomize_va_space_runtime:tst:1  true

Following items have been found on the system:
NameValue
kernel.randomize_va_space2
Enable page allocator poisoningxccdf_org.ssgproject.content_rule_grub2_page_poison_argument mediumCCE-83985-2

Enable page allocator poisoning

Rule IDxccdf_org.ssgproject.content_rule_grub2_page_poison_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_page_poison_argument:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83985-2

References:  BP28(R8), CCI-001084, CM-6(a), SRG-OS-000480-GPOS-00227, SRG-OS-000134-GPOS-00068, RHEL-09-212040, SV-257793r925366_rule

Description
To enable poisoning of free pages, add the argument page_poison=1 to the default GRUB 2 command line for the Linux operating system. To ensure that page_poison=1 is added as a kernel command line argument to newly installed kernels, add page_poison=1 to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... page_poison=1 ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="page_poison=1"
Rationale
Poisoning writes an arbitrary value to freed pages, so any modification or reference to that page after being freed or before being initialized will be detected and prevented. This prevents many types of use-after-free vulnerabilities at little performance cost. Also prevents leak of data and detection of corrupted memory.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q grub2-common; }; then

grubby --update-kernel=ALL --args=page_poison=1

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83985-2
  - DISA-STIG-RHEL-09-212040
  - NIST-800-53-CM-6(a)
  - grub2_page_poison_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="page_poison=1"
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CCE-83985-2
  - DISA-STIG-RHEL-09-212040
  - NIST-800-53-CM-6(a)
  - grub2_page_poison_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "page_poison=1"
OVAL test results details

check kernel command line parameters for page_poison=1 for all boot entries.  oval:ssg-test_grub2_page_poison_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for page_poison=1 in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_page_poison_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for page_poison=1 in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_page_poison_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_page_poison_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Enable SLUB/SLAB allocator poisoningxccdf_org.ssgproject.content_rule_grub2_slub_debug_argument mediumCCE-83986-0

Enable SLUB/SLAB allocator poisoning

Rule IDxccdf_org.ssgproject.content_rule_grub2_slub_debug_argument
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-grub2_slub_debug_argument:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83986-0

References:  BP28(R8), CCI-001084, CM-6(a), SRG-OS-000433-GPOS-00192, SRG-OS-000134-GPOS-00068, RHEL-09-212045, SV-257794r925369_rule

Description
To enable poisoning of SLUB/SLAB objects, add the argument slub_debug=P to the default GRUB 2 command line for the Linux operating system. To ensure that slub_debug=P is added as a kernel command line argument to newly installed kernels, add slub_debug=P to the default Grub2 command line for Linux operating systems. Modify the line within /etc/default/grub as shown below:
GRUB_CMDLINE_LINUX="... slub_debug=P ..."
Run the following command to update command line for already installed kernels:
# grubby --update-kernel=ALL --args="slub_debug=P"
Rationale
Poisoning writes an arbitrary value to freed objects, so any modification or reference to that object after being freed or before being initialized will be detected and prevented. This prevents many types of use-after-free vulnerabilities at little performance cost. Also prevents leak of data and detection of corrupted memory.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q grub2-common; }; then

var_slub_debug_options='P'



grubby --update-kernel=ALL --args=slub_debug=$var_slub_debug_options

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-83986-0
  - DISA-STIG-RHEL-09-212045
  - NIST-800-53-CM-6(a)
  - grub2_slub_debug_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy
- name: XCCDF Value var_slub_debug_options # promote to variable
  set_fact:
    var_slub_debug_options: !!str P
  tags:
    - always

- name: Update grub defaults and the bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="slub_debug={{ var_slub_debug_options
    }}"
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"grub2-common" in ansible_facts.packages'
  tags:
  - CCE-83986-0
  - DISA-STIG-RHEL-09-212045
  - NIST-800-53-CM-6(a)
  - grub2_slub_debug_argument
  - low_disruption
  - medium_complexity
  - medium_severity
  - reboot_required
  - restrict_strategy

[customizations.kernel]
append = "slub_debug=P"
OVAL test results details

check kernel command line parameters for slub_debug for all boot entries.  oval:ssg-test_grub2_slub_debug_entries:tst:1  false

Following items have been found on the system:
PathContent
/boot/loader/entries/ostree-1-rhel.confoptions crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1 root=UUID=3113fc7b-df72-47fc-aca7-cf3765882f24 ostree=/ostree/boot.0/rhel/c34acc6680a024649cec97ccb0dbe3eb0eaf319ab66e6f7f7f31a7f4091c77a4/0 rw

check for slub_debug in /etc/default/grub via GRUB_CMDLINE_LINUX  oval:ssg-test_grub2_slub_debug_argument:tst:1  false

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_CMDLINE_LINUX="crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M boot=UUID=c8a14e89-490f-4dcf-9f42-319f43dbccfa resume=UUID=1ab6aa65-2a18-445d-9485-64f4d24f6f0d fips=1"

check for slub_debug in /etc/default/grub via GRUB_CMDLINE_LINUX_DEFAULT  oval:ssg-test_grub2_slub_debug_argument_default:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_grub2_slub_debug_argument_default:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/default/grub^\s*GRUB_CMDLINE_LINUX_DEFAULT="(.*)"$1

Check for GRUB_DISABLE_RECOVERY=true in /etc/default/grub  oval:ssg-test_bootloader_disable_recovery_set_to_true:tst:1  true

Following items have been found on the system:
PathContent
/etc/default/grubGRUB_DISABLE_RECOVERY="true"
Disable storing core dumpsxccdf_org.ssgproject.content_rule_sysctl_kernel_core_pattern mediumCCE-83961-3

Disable storing core dumps

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_core_pattern
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_core_pattern:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83961-3

References:  CCI-000366, SC-7(10), FMT_SMF_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-213040, SV-257803r925396_rule

Description
To set the runtime status of the kernel.core_pattern kernel parameter, run the following command:
$ sudo sysctl -w kernel.core_pattern=|/bin/false
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.core_pattern = |/bin/false
Rationale
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.core_pattern from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.core_pattern.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.core_pattern" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.core_pattern
#
/sbin/sysctl -q -n -w kernel.core_pattern="|/bin/false"

#
# If kernel.core_pattern present in /etc/sysctl.conf, change value to "|/bin/false"
#	else, add "kernel.core_pattern = |/bin/false" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.core_pattern")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "|/bin/false"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.core_pattern\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.core_pattern\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83961-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.core_pattern.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83961-3
  - DISA-STIG-RHEL-09-213040
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_core_pattern

- name: Comment out any occurrences of kernel.core_pattern from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.core_pattern
    replace: '#kernel.core_pattern'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83961-3
  - DISA-STIG-RHEL-09-213040
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_core_pattern

- name: Ensure sysctl kernel.core_pattern is set to |/bin/false
  sysctl:
    name: kernel.core_pattern
    value: '|/bin/false'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83961-3
  - DISA-STIG-RHEL-09-213040
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_core_pattern

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.core_pattern%20%3D%20%7C/bin/false%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_core_pattern.conf
        overwrite: true
OVAL test results details

kernel.core_pattern static configuration  oval:ssg-test_sysctl_kernel_core_pattern_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_core_pattern:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_core_pattern:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_core_pattern:obj:1

kernel.core_pattern static configuration  oval:ssg-test_sysctl_kernel_core_pattern_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_core_pattern:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_core_pattern:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_core_pattern:obj:1

kernel.core_pattern static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_core_pattern_static_pkg_correct:tst:1  false

Following items have been found on the system:
PathContent
/usr/lib/sysctl.d/50-coredump.confkernel.core_pattern=|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h

kernel runtime parameter kernel.core_pattern set to |/bin/false  oval:ssg-test_sysctl_kernel_core_pattern_runtime:tst:1  false

Following items have been found on the system:
NameValue
kernel.core_pattern|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
Restrict Access to Kernel Message Bufferxccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict lowCCE-83952-2

Restrict Access to Kernel Message Buffer

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_dmesg_restrict
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_dmesg_restrict:def:1
Time2024-01-08T16:20:40+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83952-2

References:  BP28(R23), 3.1.5, CCI-001090, CCI-001314, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), SI-11(a), SI-11(b), SRG-OS-000132-GPOS-00067, SRG-OS-000138-GPOS-00069, SRG-APP-000243-CTR-000600, RHEL-09-213010, SV-257797r925378_rule

Description
To set the runtime status of the kernel.dmesg_restrict kernel parameter, run the following command:
$ sudo sysctl -w kernel.dmesg_restrict=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.dmesg_restrict = 1
Rationale
Unprivileged access to the kernel syslog can expose sensitive kernel address information.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.dmesg_restrict from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.dmesg_restrict.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.dmesg_restrict" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.dmesg_restrict
#
/sbin/sysctl -q -n -w kernel.dmesg_restrict="1"

#
# If kernel.dmesg_restrict present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.dmesg_restrict = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.dmesg_restrict")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.dmesg_restrict\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.dmesg_restrict\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83952-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.dmesg_restrict.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83952-2
  - DISA-STIG-RHEL-09-213010
  - NIST-800-171-3.1.5
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_dmesg_restrict

- name: Comment out any occurrences of kernel.dmesg_restrict from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.dmesg_restrict
    replace: '#kernel.dmesg_restrict'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83952-2
  - DISA-STIG-RHEL-09-213010
  - NIST-800-171-3.1.5
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_dmesg_restrict

- name: Ensure sysctl kernel.dmesg_restrict is set to 1
  sysctl:
    name: kernel.dmesg_restrict
    value: '1'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83952-2
  - DISA-STIG-RHEL-09-213010
  - NIST-800-171-3.1.5
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_dmesg_restrict

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.dmesg_restrict%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_dmesg_restrict.conf
        overwrite: true
OVAL test results details

kernel.dmesg_restrict static configuration  oval:ssg-test_sysctl_kernel_dmesg_restrict_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_dmesg_restrict:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_dmesg_restrict:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_dmesg_restrict:obj:1

kernel.dmesg_restrict static configuration  oval:ssg-test_sysctl_kernel_dmesg_restrict_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_dmesg_restrict:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_dmesg_restrict:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_dmesg_restrict:obj:1

kernel.dmesg_restrict static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_dmesg_restrict_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_kernel_dmesg_restrict:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*kernel.dmesg_restrict[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter kernel.dmesg_restrict set to 1  oval:ssg-test_sysctl_kernel_dmesg_restrict_runtime:tst:1  false

Following items have been found on the system:
NameValue
kernel.dmesg_restrict0
Disable Kernel Image Loadingxccdf_org.ssgproject.content_rule_sysctl_kernel_kexec_load_disabled mediumCCE-83954-8

Disable Kernel Image Loading

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_kexec_load_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_kexec_load_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83954-8

References:  CCI-001749, CM-6, SRG-OS-000480-GPOS-00227, SRG-OS-000366-GPOS-00153, RHEL-09-213020, SV-257799r925384_rule

Description
To set the runtime status of the kernel.kexec_load_disabled kernel parameter, run the following command:
$ sudo sysctl -w kernel.kexec_load_disabled=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.kexec_load_disabled = 1
Rationale
Disabling kexec_load allows greater control of the kernel memory. It makes it impossible to load another kernel image after it has been disabled.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.kexec_load_disabled from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.kexec_load_disabled.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.kexec_load_disabled" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.kexec_load_disabled
#
/sbin/sysctl -q -n -w kernel.kexec_load_disabled="1"

#
# If kernel.kexec_load_disabled present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.kexec_load_disabled = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.kexec_load_disabled")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.kexec_load_disabled\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.kexec_load_disabled\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83954-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.kexec_load_disabled.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83954-8
  - DISA-STIG-RHEL-09-213020
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_kexec_load_disabled

- name: Comment out any occurrences of kernel.kexec_load_disabled from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.kexec_load_disabled
    replace: '#kernel.kexec_load_disabled'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83954-8
  - DISA-STIG-RHEL-09-213020
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_kexec_load_disabled

- name: Ensure sysctl kernel.kexec_load_disabled is set to 1
  sysctl:
    name: kernel.kexec_load_disabled
    value: '1'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83954-8
  - DISA-STIG-RHEL-09-213020
  - NIST-800-53-CM-6
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_kexec_load_disabled

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.kexec_load_disabled%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_kexec_load_disabled.conf
        overwrite: true
OVAL test results details

kernel.kexec_load_disabled static configuration  oval:ssg-test_sysctl_kernel_kexec_load_disabled_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_kexec_load_disabled:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_kexec_load_disabled:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_kexec_load_disabled:obj:1

kernel.kexec_load_disabled static configuration  oval:ssg-test_sysctl_kernel_kexec_load_disabled_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_kexec_load_disabled:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_kexec_load_disabled:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_kexec_load_disabled:obj:1

kernel.kexec_load_disabled static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_kexec_load_disabled_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_kernel_kexec_load_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*kernel.kexec_load_disabled[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter kernel.kexec_load_disabled set to 1  oval:ssg-test_sysctl_kernel_kexec_load_disabled_runtime:tst:1  false

Following items have been found on the system:
NameValue
kernel.kexec_load_disabled0
Disallow kernel profiling by unprivileged usersxccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_paranoid lowCCE-83959-7

Disallow kernel profiling by unprivileged users

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_perf_event_paranoid
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_perf_event_paranoid:def:1
Time2024-01-08T16:20:40+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-83959-7

References:  BP28(R23), CCI-001090, AC-6, FMT_SMF_EXT.1, SRG-OS-000132-GPOS-00067, SRG-OS-000138-GPOS-00069, SRG-APP-000243-CTR-000600, RHEL-09-213015, SV-257798r925381_rule

Description
To set the runtime status of the kernel.perf_event_paranoid kernel parameter, run the following command:
$ sudo sysctl -w kernel.perf_event_paranoid=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.perf_event_paranoid = 2
Rationale
Kernel profiling can reveal sensitive information about kernel behaviour.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.perf_event_paranoid from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.perf_event_paranoid.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.perf_event_paranoid" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.perf_event_paranoid
#
/sbin/sysctl -q -n -w kernel.perf_event_paranoid="2"

#
# If kernel.perf_event_paranoid present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.perf_event_paranoid = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.perf_event_paranoid")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.perf_event_paranoid\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.perf_event_paranoid\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83959-7"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.perf_event_paranoid.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83959-7
  - DISA-STIG-RHEL-09-213015
  - NIST-800-53-AC-6
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_perf_event_paranoid

- name: Comment out any occurrences of kernel.perf_event_paranoid from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.perf_event_paranoid
    replace: '#kernel.perf_event_paranoid'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83959-7
  - DISA-STIG-RHEL-09-213015
  - NIST-800-53-AC-6
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_perf_event_paranoid

- name: Ensure sysctl kernel.perf_event_paranoid is set to 2
  sysctl:
    name: kernel.perf_event_paranoid
    value: '2'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83959-7
  - DISA-STIG-RHEL-09-213015
  - NIST-800-53-AC-6
  - disable_strategy
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
  - sysctl_kernel_perf_event_paranoid

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.perf_event_paranoid%3D2%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_perf_event_paranoid.conf
        overwrite: true
OVAL test results details

kernel.perf_event_paranoid static configuration  oval:ssg-test_sysctl_kernel_perf_event_paranoid_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_perf_event_paranoid:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_perf_event_paranoid:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_perf_event_paranoid:obj:1

kernel.perf_event_paranoid static configuration  oval:ssg-test_sysctl_kernel_perf_event_paranoid_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_perf_event_paranoid:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_perf_event_paranoid:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_perf_event_paranoid:obj:1

kernel.perf_event_paranoid static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_perf_event_paranoid_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_kernel_perf_event_paranoid:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*kernel.perf_event_paranoid[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter kernel.perf_event_paranoid set to 2  oval:ssg-test_sysctl_kernel_perf_event_paranoid_runtime:tst:1  true

Following items have been found on the system:
NameValue
kernel.perf_event_paranoid2
Disable Access to Network bpf() Syscall From Unprivileged Processesxccdf_org.ssgproject.content_rule_sysctl_kernel_unprivileged_bpf_disabled mediumCCE-83957-1

Disable Access to Network bpf() Syscall From Unprivileged Processes

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_unprivileged_bpf_disabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_unprivileged_bpf_disabled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83957-1

References:  BP28(R9), CCI-000366, AC-6, SC-7(10), FMT_SMF_EXT.1, SRG-OS-000132-GPOS-00067, SRG-OS-000480-GPOS-00227, RHEL-09-213075, SV-257810r925417_rule

Description
To set the runtime status of the kernel.unprivileged_bpf_disabled kernel parameter, run the following command:
$ sudo sysctl -w kernel.unprivileged_bpf_disabled=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.unprivileged_bpf_disabled = 1
Rationale
Loading and accessing the packet filters programs and maps using the bpf() syscall has the potential of revealing sensitive information about the kernel state.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.unprivileged_bpf_disabled from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.unprivileged_bpf_disabled.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.unprivileged_bpf_disabled" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.unprivileged_bpf_disabled
#
/sbin/sysctl -q -n -w kernel.unprivileged_bpf_disabled="1"

#
# If kernel.unprivileged_bpf_disabled present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.unprivileged_bpf_disabled = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.unprivileged_bpf_disabled")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.unprivileged_bpf_disabled\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.unprivileged_bpf_disabled\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83957-1"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.unprivileged_bpf_disabled.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83957-1
  - DISA-STIG-RHEL-09-213075
  - NIST-800-53-AC-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_unprivileged_bpf_disabled

- name: Comment out any occurrences of kernel.unprivileged_bpf_disabled from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.unprivileged_bpf_disabled
    replace: '#kernel.unprivileged_bpf_disabled'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83957-1
  - DISA-STIG-RHEL-09-213075
  - NIST-800-53-AC-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_unprivileged_bpf_disabled

- name: Ensure sysctl kernel.unprivileged_bpf_disabled is set to 1
  sysctl:
    name: kernel.unprivileged_bpf_disabled
    value: '1'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83957-1
  - DISA-STIG-RHEL-09-213075
  - NIST-800-53-AC-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_unprivileged_bpf_disabled

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.unprivileged_bpf_disabled%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_unprivileged_bpf_disabled.conf
        overwrite: true
OVAL test results details

kernel.unprivileged_bpf_disabled static configuration  oval:ssg-test_sysctl_kernel_unprivileged_bpf_disabled_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_unprivileged_bpf_disabled:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_unprivileged_bpf_disabled:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_unprivileged_bpf_disabled:obj:1

kernel.unprivileged_bpf_disabled static configuration  oval:ssg-test_sysctl_kernel_unprivileged_bpf_disabled_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_unprivileged_bpf_disabled:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_unprivileged_bpf_disabled:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_unprivileged_bpf_disabled:obj:1

kernel.unprivileged_bpf_disabled static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_unprivileged_bpf_disabled_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_kernel_unprivileged_bpf_disabled:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*kernel.unprivileged_bpf_disabled[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter kernel.unprivileged_bpf_disabled set to 1  oval:ssg-test_sysctl_kernel_unprivileged_bpf_disabled_runtime:tst:1  false

Following items have been found on the system:
NameValue
kernel.unprivileged_bpf_disabled2
Restrict usage of ptrace to descendant processesxccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope mediumCCE-83965-4

Restrict usage of ptrace to descendant processes

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_yama_ptrace_scope
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_kernel_yama_ptrace_scope:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83965-4

References:  BP28(R25), CCI-000366, SC-7(10), SRG-OS-000132-GPOS-00067, SRG-OS-000480-GPOS-00227, RHEL-09-213080, SV-257811r925420_rule

Description
To set the runtime status of the kernel.yama.ptrace_scope kernel parameter, run the following command:
$ sudo sysctl -w kernel.yama.ptrace_scope=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.yama.ptrace_scope = 1
Rationale
Unrestricted usage of ptrace allows compromised binaries to run ptrace on another processes of the user. Like this, the attacker can steal sensitive information from the target processes (e.g. SSH sessions, web browser, ...) without any additional assistance from the user (i.e. without resorting to phishing).

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.yama.ptrace_scope from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.yama.ptrace_scope.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.yama.ptrace_scope" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.yama.ptrace_scope
#
/sbin/sysctl -q -n -w kernel.yama.ptrace_scope="1"

#
# If kernel.yama.ptrace_scope present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.yama.ptrace_scope = 1" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.yama.ptrace_scope")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.yama.ptrace_scope\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.yama.ptrace_scope\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83965-4"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*kernel.yama.ptrace_scope.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83965-4
  - DISA-STIG-RHEL-09-213080
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_yama_ptrace_scope

- name: Comment out any occurrences of kernel.yama.ptrace_scope from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.yama.ptrace_scope
    replace: '#kernel.yama.ptrace_scope'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83965-4
  - DISA-STIG-RHEL-09-213080
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_yama_ptrace_scope

- name: Ensure sysctl kernel.yama.ptrace_scope is set to 1
  sysctl:
    name: kernel.yama.ptrace_scope
    value: '1'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83965-4
  - DISA-STIG-RHEL-09-213080
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_yama_ptrace_scope

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,kernel.yama.ptrace_scope%3D1%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_kernel_yama_ptrace_scope.conf
        overwrite: true
OVAL test results details

kernel.yama.ptrace_scope static configuration  oval:ssg-test_sysctl_kernel_yama_ptrace_scope_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_yama_ptrace_scope:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_yama_ptrace_scope:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_yama_ptrace_scope:obj:1

kernel.yama.ptrace_scope static configuration  oval:ssg-test_sysctl_kernel_yama_ptrace_scope_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_kernel_yama_ptrace_scope:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_kernel_yama_ptrace_scope:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_kernel_yama_ptrace_scope:obj:1

kernel.yama.ptrace_scope static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_kernel_yama_ptrace_scope_static_pkg_correct:tst:1  false

Following items have been found on the system:
PathContent
/usr/lib/sysctl.d/10-default-yama-scope.confkernel.yama.ptrace_scope = 0

kernel runtime parameter kernel.yama.ptrace_scope set to 1  oval:ssg-test_sysctl_kernel_yama_ptrace_scope_runtime:tst:1  false

Following items have been found on the system:
NameValue
kernel.yama.ptrace_scope0
Harden the operation of the BPF just-in-time compilerxccdf_org.ssgproject.content_rule_sysctl_net_core_bpf_jit_harden mediumCCE-83966-2

Harden the operation of the BPF just-in-time compiler

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_core_bpf_jit_harden
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_net_core_bpf_jit_harden:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83966-2

References:  BP28(R12), CCI-000366, CM-6, SC-7(10), FMT_SMF_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-251045, SV-257942r925813_rule

Description
To set the runtime status of the net.core.bpf_jit_harden kernel parameter, run the following command:
$ sudo sysctl -w net.core.bpf_jit_harden=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.core.bpf_jit_harden = 2
Rationale
When hardened, the extended Berkeley Packet Filter just-in-time compiler will randomize any kernel addresses in the BPF programs and maps, and will not expose the JIT addresses in /proc/kallsyms.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.core.bpf_jit_harden from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.core.bpf_jit_harden.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.core.bpf_jit_harden" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.core.bpf_jit_harden
#
/sbin/sysctl -q -n -w net.core.bpf_jit_harden="2"

#
# If net.core.bpf_jit_harden present in /etc/sysctl.conf, change value to "2"
#	else, add "net.core.bpf_jit_harden = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.core.bpf_jit_harden")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.core.bpf_jit_harden\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.core.bpf_jit_harden\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83966-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*net.core.bpf_jit_harden.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83966-2
  - DISA-STIG-RHEL-09-251045
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_core_bpf_jit_harden

- name: Comment out any occurrences of net.core.bpf_jit_harden from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.core.bpf_jit_harden
    replace: '#net.core.bpf_jit_harden'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83966-2
  - DISA-STIG-RHEL-09-251045
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_core_bpf_jit_harden

- name: Ensure sysctl net.core.bpf_jit_harden is set to 2
  sysctl:
    name: net.core.bpf_jit_harden
    value: '2'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83966-2
  - DISA-STIG-RHEL-09-251045
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_core_bpf_jit_harden

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,net.core.bpf_jit_harden%3D2%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_net_core_bpf_jit_harden.conf
        overwrite: true
OVAL test results details

net.core.bpf_jit_harden static configuration  oval:ssg-test_sysctl_net_core_bpf_jit_harden_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_core_bpf_jit_harden:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_core_bpf_jit_harden:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_core_bpf_jit_harden:obj:1

net.core.bpf_jit_harden static configuration  oval:ssg-test_sysctl_net_core_bpf_jit_harden_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_net_core_bpf_jit_harden:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_net_core_bpf_jit_harden:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_net_core_bpf_jit_harden:obj:1

net.core.bpf_jit_harden static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_net_core_bpf_jit_harden_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_net_core_bpf_jit_harden:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*net.core.bpf_jit_harden[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter net.core.bpf_jit_harden set to 2  oval:ssg-test_sysctl_net_core_bpf_jit_harden_runtime:tst:1  false

Following items have been found on the system:
NameValue
net.core.bpf_jit_harden1
Disable the use of user namespacesxccdf_org.ssgproject.content_rule_sysctl_user_max_user_namespaces mediumCCE-83956-3

Disable the use of user namespaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_user_max_user_namespaces
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sysctl_user_max_user_namespaces:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-83956-3

References:  CCI-000366, SC-39, CM-6(a), FMT_SMF_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-213105, SV-257816r925435_rule

Description
To set the runtime status of the user.max_user_namespaces kernel parameter, run the following command:
$ sudo sysctl -w user.max_user_namespaces=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
user.max_user_namespaces = 0
When containers are deployed on the machine, the value should be set to large non-zero value.
Rationale
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or system objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. User namespaces are used primarily for Linux containers. The value 0 disallows the use of user namespaces.
Warnings
warning  This configuration baseline was created to deploy the base operating system for general purpose workloads. When the operating system is configured for certain purposes, such as to host Linux Containers, it is expected that user.max_user_namespaces will be enabled.

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of user.max_user_namespaces from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*user.max_user_namespaces.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "user.max_user_namespaces" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for user.max_user_namespaces
#
/sbin/sysctl -q -n -w user.max_user_namespaces="0"

#
# If user.max_user_namespaces present in /etc/sysctl.conf, change value to "0"
#	else, add "user.max_user_namespaces = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^user.max_user_namespaces")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^user.max_user_namespaces\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^user.max_user_namespaces\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    cce="CCE-83956-3"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "${SYSCONFIG_FILE}" >> "${SYSCONFIG_FILE}"
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    contains: ^[\s]*user.max_user_namespaces.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83956-3
  - DISA-STIG-RHEL-09-213105
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-39
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_user_max_user_namespaces

- name: Comment out any occurrences of user.max_user_namespaces from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*user.max_user_namespaces
    replace: '#user.max_user_namespaces'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83956-3
  - DISA-STIG-RHEL-09-213105
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-39
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_user_max_user_namespaces

- name: Ensure sysctl user.max_user_namespaces is set to 0
  sysctl:
    name: user.max_user_namespaces
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-83956-3
  - DISA-STIG-RHEL-09-213105
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-39
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_user_max_user_namespaces

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,user.max_user_namespaces%20%3D%200%0A
        mode: 0644
        path: /etc/sysctl.d/75-sysctl_user_max_user_namespaces.conf
        overwrite: true
OVAL test results details

user.max_user_namespaces static configuration  oval:ssg-test_sysctl_user_max_user_namespaces_static_user:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_user_max_user_namespaces:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_user_max_user_namespaces:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_user_max_user_namespaces:obj:1

user.max_user_namespaces static configuration  oval:ssg-test_sysctl_user_max_user_namespaces_static_user_missing:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_static_user_sysctl_user_max_user_namespaces:obj:1 of type textfilecontent54_object
Set
oval:ssg-object_static_etc_sysctls_sysctl_user_max_user_namespaces:obj:1 oval:ssg-object_static_run_usr_local_sysctls_sysctl_user_max_user_namespaces:obj:1

user.max_user_namespaces static configuration in /usr/lib/sysctl.d/*.conf  oval:ssg-test_sysctl_user_max_user_namespaces_static_pkg_correct:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_static_usr_lib_sysctld_sysctl_user_max_user_namespaces:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/usr/lib/sysctl.d^.*\.conf$^[\s]*user.max_user_namespaces[\s]*=[\s]*(.*)[\s]*$1

kernel runtime parameter user.max_user_namespaces set to 0  oval:ssg-test_sysctl_user_max_user_namespaces_runtime:tst:1  false

Following items have been found on the system:
NameValue
user.max_user_namespaces14219
Install policycoreutils-python-utils packagexccdf_org.ssgproject.content_rule_package_policycoreutils-python-utils_installed mediumCCE-84070-2

Install policycoreutils-python-utils package

Rule IDxccdf_org.ssgproject.content_rule_package_policycoreutils-python-utils_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_policycoreutils-python-utils_installed:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84070-2

References:  SRG-OS-000480-GPOS-00227, RHEL-09-431030, SV-258082r926233_rule

Description
The policycoreutils-python-utils package can be installed with the following command:
$ sudo dnf install policycoreutils-python-utils
Rationale
This package is required to operate and manage an SELinux environment and its policies. It provides utilities such as semanage, audit2allow, audit2why, chcat and sandbox.
OVAL test results details

package policycoreutils-python-utils is installed  oval:ssg-test_package_policycoreutils-python-utils_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
policycoreutils-python-utilsnoarch(none)3.el9_33.50:3.5-3.el9_3199e2f91fd431d51policycoreutils-python-utils-0:3.5-3.el9_3.noarch
Install policycoreutils Packagexccdf_org.ssgproject.content_rule_package_policycoreutils_installed lowCCE-84071-0

Install policycoreutils Package

Rule IDxccdf_org.ssgproject.content_rule_package_policycoreutils_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_policycoreutils_installed:def:1
Time2024-01-08T16:20:40+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84071-0

References:  CCI-001084, SRG-OS-000480-GPOS-00227, SRG-OS-000134-GPOS-00068, RHEL-09-431025, SV-258081r926230_rule

Description
The policycoreutils package can be installed with the following command:
$ sudo dnf install policycoreutils
Rationale
Security-enhanced Linux is a feature of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. policycoreutils contains the policy core utilities that are required for basic operation of an SELinux-enabled system. These utilities include load_policy to load SELinux policies, setfiles to label filesystems, newrole to switch roles, and so on.
OVAL test results details

package policycoreutils is installed  oval:ssg-test_package_policycoreutils_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
policycoreutilsx86_64(none)3.el9_33.50:3.5-3.el9_3199e2f91fd431d51policycoreutils-0:3.5-3.el9_3.x86_64
Ensure No Device Files are Unlabeled by SELinuxxccdf_org.ssgproject.content_rule_selinux_all_devicefiles_labeled mediumCCE-85920-7

Ensure No Device Files are Unlabeled by SELinux

Rule IDxccdf_org.ssgproject.content_rule_selinux_all_devicefiles_labeled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-selinux_all_devicefiles_labeled:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-85920-7

References:  1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 5, 6, 7, 8, 9, APO01.06, APO11.04, BAI01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, MEA02.01, 3.1.2, 3.1.5, 3.7.2, CCI-000022, CCI-000032, CCI-000318, CCI-000366, CCI-000368, CCI-001812, CCI-001813, CCI-001814, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 5.2, SR 6.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), AC-3(3)(a), AC-6, DE.CM-1, DE.CM-7, PR.AC-4, PR.DS-5, PR.IP-1, PR.IP-3, PR.PT-1, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-232260, SV-257932r925783_rule

Description
Device files, which are used for communication with important system resources, should be labeled with proper SELinux types. If any device files carry the SELinux type device_t or unlabeled_t, report the bug so that policy can be corrected. Supply information about what the device is and what programs use it.

To check for incorrectly labeled device files, run following commands:
$ sudo find /dev -context *:device_t:* \( -type c -o -type b \) -printf "%p %Z\n"
$ sudo find /dev -context *:unlabeled_t:* \( -type c -o -type b \) -printf "%p %Z\n"
It should produce no output in a well-configured system.
Rationale
If a device file carries the SELinux type device_t or unlabeled_t, then SELinux cannot properly restrict access to the device file.
Warnings
warning  Automatic remediation of this control is not available. The remediation can be achieved by amending SELinux policy.
OVAL test results details

device_t in /dev  oval:ssg-test_selinux_dev_device_t:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_selinux_dev_device_t:obj:1 of type selinuxsecuritycontext_object
FilepathFilter
/dev/ttyS2
/dev/ttyS1
/dev/ttyS0
/dev/ptmx
/dev/tty62
/dev/tty61
/dev/tty60
/dev/tty59
/dev/tty58
/dev/tty57
/dev/ttyS3
/dev/vcsa2
/dev/vcsa5
/dev/vcsu5
/dev/vcs5
/dev/vcsa4
/dev/vcsu4
/dev/tty9
/dev/tty8
/dev/tty7
/dev/tty6
/dev/tty5
/dev/tty4
/dev/tty3
/dev/tty2
/dev/vcsa1
/dev/vcsu1
/dev/vcs1
/dev/vcsa
/dev/vcsu
/dev/vcs
/dev/tty0
/dev/console
/dev/tty
/dev/port
/dev/vcsu6
/dev/vcs6
/dev/dri/card0
/dev/dri/renderD128
/dev/snd/controlC0
/dev/snd/hwC0D0
/dev/snd/pcmC0D0c
/dev/snd/pcmC0D0p
/dev/snd/seq
/dev/snd/timer
/dev/tty36
/dev/tty35
/dev/tty34
/dev/tty33
/dev/tty32
/dev/tty31
/dev/tty30
/dev/tty29
/dev/tty28
/dev/tty27
/dev/tty26
/dev/tty25
/dev/tty24
/dev/tty23
/dev/tty22
/dev/tty21
/dev/tty20
/dev/tty19
/dev/tty18
/dev/tty17
/dev/tty16
/dev/tty15
/dev/tty14
/dev/tty13
/dev/tty12
/dev/tty11
/dev/tty10
/dev/vcsu3
/dev/vda2
/dev/tty56
/dev/tty55
/dev/tty54
/dev/tty53
/dev/tty52
/dev/tty51
/dev/tty50
/dev/tty49
/dev/tty48
/dev/tty47
/dev/tty46
/dev/tty45
/dev/tty44
/dev/tty43
/dev/tty42
/dev/tty41
/dev/tty40
/dev/tty39
/dev/tty38
/dev/tty37
/dev/kvm
/dev/fb0
/dev/vcsa3
/dev/vcs3
/dev/vcsa6
/dev/vhost-vsock
/dev/vcs4
/dev/vcsu2
/dev/vcs2
/dev/sr0
/dev/vhost-net
/dev/sg0
/dev/input/event4
/dev/loop-control
/dev/input/event3
/dev/input/mouse1
/dev/input/event1
/dev/input/event0
/dev/input/mice
/dev/udmabuf
/dev/tty63
/dev/mem
/dev/uinput
/dev/ppp
/dev/kmsg
/dev/hpet
/dev/userfaultfd
/dev/snapshot
/dev/cpu/3/cpuid
/dev/hwrng
/dev/mcelog
/dev/rtc0
/dev/usbmon2
/dev/usbmon1
/dev/usbmon0
/dev/nvram
/dev/uhid
/dev/mapper/control
/dev/net/tun
/dev/pts/ptmx
/dev/fuse
/dev/vda
/dev/vport2p1
/dev/watchdog
/dev/watchdog0
/dev/vhci
/dev/vfio/vfio
/dev/bsg/0:0:0:0
/dev/vda3
/dev/random
/dev/full
/dev/zero
/dev/vda1
/dev/vport2p2
/dev/rfkill
/dev/cpu_dma_latency
/dev/bus/usb/001/002
/dev/bus/usb/002/001
/dev/bus/usb/001/001
/dev/dma_heap/system
/dev/cpu/1/cpuid
/dev/autofs
/dev/cpu/0/cpuid
/dev/cpu/3/msr
/dev/cpu/2/cpuid
/dev/cpu/2/msr
/dev/cpu/1/msr
/dev/cpu/0/msr
/dev/tty1
/dev/urandom
/dev/null
/dev/vga_arbiter
oval:ssg-state_selinux_dev_device_t:ste:1

unlabeled_t in /dev  oval:ssg-test_selinux_dev_unlabeled_t:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_selinux_dev_unlabeled_t:obj:1 of type selinuxsecuritycontext_object
FilepathFilter
/dev/ttyS2
/dev/ttyS1
/dev/ttyS0
/dev/ptmx
/dev/tty62
/dev/tty61
/dev/tty60
/dev/tty59
/dev/tty58
/dev/tty57
/dev/ttyS3
/dev/vcsa2
/dev/vcsa5
/dev/vcsu5
/dev/vcs5
/dev/vcsa4
/dev/vcsu4
/dev/tty9
/dev/tty8
/dev/tty7
/dev/tty6
/dev/tty5
/dev/tty4
/dev/tty3
/dev/tty2
/dev/vcsa1
/dev/vcsu1
/dev/vcs1
/dev/vcsa
/dev/vcsu
/dev/vcs
/dev/tty0
/dev/console
/dev/tty
/dev/port
/dev/vcsu6
/dev/vcs6
/dev/dri/card0
/dev/dri/renderD128
/dev/snd/controlC0
/dev/snd/hwC0D0
/dev/snd/pcmC0D0c
/dev/snd/pcmC0D0p
/dev/snd/seq
/dev/snd/timer
/dev/tty36
/dev/tty35
/dev/tty34
/dev/tty33
/dev/tty32
/dev/tty31
/dev/tty30
/dev/tty29
/dev/tty28
/dev/tty27
/dev/tty26
/dev/tty25
/dev/tty24
/dev/tty23
/dev/tty22
/dev/tty21
/dev/tty20
/dev/tty19
/dev/tty18
/dev/tty17
/dev/tty16
/dev/tty15
/dev/tty14
/dev/tty13
/dev/tty12
/dev/tty11
/dev/tty10
/dev/vcsu3
/dev/vda2
/dev/tty56
/dev/tty55
/dev/tty54
/dev/tty53
/dev/tty52
/dev/tty51
/dev/tty50
/dev/tty49
/dev/tty48
/dev/tty47
/dev/tty46
/dev/tty45
/dev/tty44
/dev/tty43
/dev/tty42
/dev/tty41
/dev/tty40
/dev/tty39
/dev/tty38
/dev/tty37
/dev/kvm
/dev/fb0
/dev/vcsa3
/dev/vcs3
/dev/vcsa6
/dev/vhost-vsock
/dev/vcs4
/dev/vcsu2
/dev/vcs2
/dev/sr0
/dev/vhost-net
/dev/sg0
/dev/input/event4
/dev/loop-control
/dev/input/event3
/dev/input/mouse1
/dev/input/event1
/dev/input/event0
/dev/input/mice
/dev/udmabuf
/dev/tty63
/dev/mem
/dev/uinput
/dev/ppp
/dev/kmsg
/dev/hpet
/dev/userfaultfd
/dev/snapshot
/dev/cpu/3/cpuid
/dev/hwrng
/dev/mcelog
/dev/rtc0
/dev/usbmon2
/dev/usbmon1
/dev/usbmon0
/dev/nvram
/dev/uhid
/dev/mapper/control
/dev/net/tun
/dev/pts/ptmx
/dev/fuse
/dev/vda
/dev/vport2p1
/dev/watchdog
/dev/watchdog0
/dev/vhci
/dev/vfio/vfio
/dev/bsg/0:0:0:0
/dev/vda3
/dev/random
/dev/full
/dev/zero
/dev/vda1
/dev/vport2p2
/dev/rfkill
/dev/cpu_dma_latency
/dev/bus/usb/001/002
/dev/bus/usb/002/001
/dev/bus/usb/001/001
/dev/dma_heap/system
/dev/cpu/1/cpuid
/dev/autofs
/dev/cpu/0/cpuid
/dev/cpu/3/msr
/dev/cpu/2/cpuid
/dev/cpu/2/msr
/dev/cpu/1/msr
/dev/cpu/0/msr
/dev/tty1
/dev/urandom
/dev/null
/dev/vga_arbiter
oval:ssg-state_selinux_dev_unlabeled_t:ste:1
Configure SELinux Policyxccdf_org.ssgproject.content_rule_selinux_policytype mediumCCE-84074-4

Configure SELinux Policy

Rule IDxccdf_org.ssgproject.content_rule_selinux_policytype
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-selinux_policytype:def:1
Time2024-01-08T16:20:40+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84074-4

References:  BP28(R66), A.6.SEC-RHEL1, 1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9, APO01.06, APO11.04, APO13.01, BAI03.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, MEA02.01, 3.1.2, 3.7.2, CCI-002165, CCI-002696, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), 4.2.3.4, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.2, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-004-6 R3.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CIP-007-3 R6.5, AC-3, AC-3(3)(a), AU-9, SC-7(21), DE.AE-1, ID.AM-3, PR.AC-4, PR.AC-5, PR.AC-6, PR.DS-5, PR.PT-1, PR.PT-3, PR.PT-4, SRG-OS-000445-GPOS-00199, SRG-APP-000233-CTR-000585, RHEL-09-431015, 1.6.1.3, SV-258079r926224_rule

Description
The SELinux targeted policy is appropriate for general-purpose desktops and servers, as well as systems in many other roles. To configure the system to use this policy, add or correct the following line in /etc/selinux/config:
SELINUXTYPE=targeted
Other policies, such as mls, provide additional security labeling and greater confinement but are not compatible with many general-purpose use cases.
Rationale
Setting the SELinux policy to targeted or a more specialized policy ensures the system will confine processes that are likely to be targeted for exploitation, such as network or system services.

Note: During the development or debugging of SELinux modules, it is common to temporarily place non-production systems in permissive mode. In such temporary cases, SELinux policies should be developed, and once work is completed, the system should be reconfigured to targeted.
OVAL test results details

Tests the value of the ^[\s]*SELINUXTYPE[\s]*=[\s]*([^#]*) expression in the /etc/selinux/config file  oval:ssg-test_selinux_policy:tst:1  true

Following items have been found on the system:
PathContent
/etc/selinux/configSELINUXTYPE=targeted
Ensure SELinux State is Enforcingxccdf_org.ssgproject.content_rule_selinux_state highCCE-84079-3

Ensure SELinux State is Enforcing

Rule IDxccdf_org.ssgproject.content_rule_selinux_state
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-selinux_state:def:1
Time2024-01-08T16:20:40+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84079-3

References:  BP28(R4), BP28(R66), A.6.SEC-RHEL1, 1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 5, 6, 8, 9, APO01.06, APO11.04, APO13.01, BAI03.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, MEA02.01, 3.1.2, 3.7.2, CCI-001084, CCI-002165, CCI-002696, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), 4.2.3.4, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.2, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-004-6 R3.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CIP-007-3 R6.5, AC-3, AC-3(3)(a), AU-9, SC-7(21), DE.AE-1, ID.AM-3, PR.AC-4, PR.AC-5, PR.AC-6, PR.DS-5, PR.PT-1, PR.PT-3, PR.PT-4, SRG-OS-000445-GPOS-00199, SRG-OS-000134-GPOS-00068, RHEL-09-431010, 1.6.1.5, SV-258078r926221_rule

Description
The SELinux state should be set to enforcing at system boot time. In the file /etc/selinux/config, add or correct the following line to configure the system to boot into enforcing mode:
SELINUX=enforcing
Rationale
Setting the SELinux state to enforcing ensures SELinux is able to confine potentially compromised processes to the security policy, which is designed to prevent them from causing damage to the system or further elevating their privileges.
OVAL test results details

/selinux/enforce is 1  oval:ssg-test_etc_selinux_config:tst:1  true

Following items have been found on the system:
PathContent
/etc/selinux/configSELINUX=enforcing
Disable KDump Kernel Crash Analyzer (kdump)xccdf_org.ssgproject.content_rule_service_kdump_disabled mediumCCE-84232-8

Disable KDump Kernel Crash Analyzer (kdump)

Rule IDxccdf_org.ssgproject.content_rule_service_kdump_disabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_kdump_disabled:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84232-8

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000366, CCI-001665, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, FMT_SMF_EXT.1.1, SRG-OS-000269-GPOS-00103, SRG-OS-000480-GPOS-00227, RHEL-09-213115, SV-257818r925441_rule

Description
The kdump service provides a kernel crash dump analyzer. It uses the kexec system call to boot a secondary kernel ("capture" kernel) following a system crash, which can load information from the crashed kernel for analysis. The kdump service can be disabled with the following command:
$ sudo systemctl mask --now kdump.service
Rationale
Kernel core dumps may contain the full contents of system memory at the time of the crash. Kernel core dumps consume a considerable amount of disk space and may result in denial of service by exhausting the available space on the target file system partition. Unless the system is used for kernel development or testing, there is little need to run the kdump service.
OVAL test results details

package kexec-tools is removed  oval:ssg-test_service_kdump_package_kexec-tools_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_service_kdump_package_kexec-tools_removed:obj:1 of type rpminfo_object
Name
kexec-tools

Test that the kdump service is not running  oval:ssg-test_service_not_running_kdump:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_service_not_running_kdump:obj:1 of type systemdunitproperty_object
UnitProperty
^kdump\.(service|socket)$ActiveState

Test that the property LoadState from the service kdump is masked  oval:ssg-test_service_loadstate_is_masked_kdump:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_service_loadstate_is_masked_kdump:obj:1 of type systemdunitproperty_object
UnitProperty
^kdump\.(service|socket)$LoadState
Verify Group Who Owns cron.dxccdf_org.ssgproject.content_rule_file_groupowner_cron_d mediumCCE-84177-5

Verify Group Who Owns cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_d
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_d:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84177-5

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.7, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.d, run the command:
$ sudo chgrp root /etc/cron.d
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.d/  oval:ssg-test_file_groupowner_cron_d_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_d_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dno valueoval:ssg-symlink_file_groupowner_cron_d_uid_0:ste:1oval:ssg-state_file_groupowner_cron_d_gid_0_0:ste:1
Verify Group Who Owns cron.dailyxccdf_org.ssgproject.content_rule_file_groupowner_cron_daily mediumCCE-84170-0

Verify Group Who Owns cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_daily
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_daily:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84170-0

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.4, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.daily, run the command:
$ sudo chgrp root /etc/cron.daily
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.daily/  oval:ssg-test_file_groupowner_cron_daily_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_daily_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dailyno valueoval:ssg-symlink_file_groupowner_cron_daily_uid_0:ste:1oval:ssg-state_file_groupowner_cron_daily_gid_0_0:ste:1
Verify Group Who Owns cron.denyxccdf_org.ssgproject.content_rule_file_groupowner_cron_deny mediumCCE-86537-8

Verify Group Who Owns cron.deny

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_deny
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_deny:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86537-8

References:  CCI-000366, CM-6 b, SRG-OS-000480-GPOS-00227, RHEL-09-232235, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.deny, run the command:
$ sudo chgrp root /etc/cron.deny
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.deny  oval:ssg-test_file_groupowner_cron_deny_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_deny_0:obj:1 of type file_object
FilepathFilterFilter
/etc/cron.denyoval:ssg-symlink_file_groupowner_cron_deny_uid_0:ste:1oval:ssg-state_file_groupowner_cron_deny_gid_0_0:ste:1
Verify Group Who Owns cron.hourlyxccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly mediumCCE-84186-6

Verify Group Who Owns cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_hourly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84186-6

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.3, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.hourly, run the command:
$ sudo chgrp root /etc/cron.hourly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.hourly/  oval:ssg-test_file_groupowner_cron_hourly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_hourly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.hourlyno valueoval:ssg-symlink_file_groupowner_cron_hourly_uid_0:ste:1oval:ssg-state_file_groupowner_cron_hourly_gid_0_0:ste:1
Verify Group Who Owns cron.monthlyxccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly mediumCCE-84189-0

Verify Group Who Owns cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_monthly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84189-0

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.6, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.monthly, run the command:
$ sudo chgrp root /etc/cron.monthly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.monthly/  oval:ssg-test_file_groupowner_cron_monthly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_monthly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.monthlyno valueoval:ssg-symlink_file_groupowner_cron_monthly_uid_0:ste:1oval:ssg-state_file_groupowner_cron_monthly_gid_0_0:ste:1
Verify Group Who Owns cron.weeklyxccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly mediumCCE-84174-2

Verify Group Who Owns cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_cron_weekly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84174-2

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.5, SV-257927r925768_rule

Description
To properly set the group owner of /etc/cron.weekly, run the command:
$ sudo chgrp root /etc/cron.weekly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/cron.weekly/  oval:ssg-test_file_groupowner_cron_weekly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_cron_weekly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.weeklyno valueoval:ssg-symlink_file_groupowner_cron_weekly_uid_0:ste:1oval:ssg-state_file_groupowner_cron_weekly_gid_0_0:ste:1
Verify Group Who Owns Crontabxccdf_org.ssgproject.content_rule_file_groupowner_crontab mediumCCE-84171-8

Verify Group Who Owns Crontab

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_crontab
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_crontab:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84171-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232235, 5.1.2, SV-257927r925768_rule

Description
To properly set the group owner of /etc/crontab, run the command:
$ sudo chgrp root /etc/crontab
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/crontab  oval:ssg-test_file_groupowner_crontab_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_crontab_0:obj:1 of type file_object
FilepathFilterFilter
/etc/crontaboval:ssg-symlink_file_groupowner_crontab_uid_0:ste:1oval:ssg-state_file_groupowner_crontab_gid_0_0:ste:1
Verify Owner on cron.dxccdf_org.ssgproject.content_rule_file_owner_cron_d mediumCCE-84169-2

Verify Owner on cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_d
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_d:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84169-2

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.7, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.d, run the command:
$ sudo chown root /etc/cron.d 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.d/  oval:ssg-test_file_owner_cron_d_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_d_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dno valueoval:ssg-symlink_file_owner_cron_d_uid_0:ste:1oval:ssg-state_file_owner_cron_d_uid_0_0:ste:1
Verify Owner on cron.dailyxccdf_org.ssgproject.content_rule_file_owner_cron_daily mediumCCE-84188-2

Verify Owner on cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_daily
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_daily:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84188-2

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.4, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.daily, run the command:
$ sudo chown root /etc/cron.daily 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.daily/  oval:ssg-test_file_owner_cron_daily_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_daily_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dailyno valueoval:ssg-symlink_file_owner_cron_daily_uid_0:ste:1oval:ssg-state_file_owner_cron_daily_uid_0_0:ste:1
Verify Owner on cron.denyxccdf_org.ssgproject.content_rule_file_owner_cron_deny mediumCCE-86887-7

Verify Owner on cron.deny

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_deny
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_deny:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86887-7

References:  CCI-000366, CM-6 b, SRG-OS-000480-GPOS-00227, RHEL-09-232230, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.deny, run the command:
$ sudo chown root /etc/cron.deny 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.deny  oval:ssg-test_file_owner_cron_deny_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_deny_0:obj:1 of type file_object
FilepathFilterFilter
/etc/cron.denyoval:ssg-symlink_file_owner_cron_deny_uid_0:ste:1oval:ssg-state_file_owner_cron_deny_uid_0_0:ste:1
Verify Owner on cron.hourlyxccdf_org.ssgproject.content_rule_file_owner_cron_hourly mediumCCE-84168-4

Verify Owner on cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_hourly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_hourly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84168-4

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.3, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.hourly, run the command:
$ sudo chown root /etc/cron.hourly 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.hourly/  oval:ssg-test_file_owner_cron_hourly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_hourly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.hourlyno valueoval:ssg-symlink_file_owner_cron_hourly_uid_0:ste:1oval:ssg-state_file_owner_cron_hourly_uid_0_0:ste:1
Verify Owner on cron.monthlyxccdf_org.ssgproject.content_rule_file_owner_cron_monthly mediumCCE-84179-1

Verify Owner on cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_monthly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_monthly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84179-1

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.6, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.monthly, run the command:
$ sudo chown root /etc/cron.monthly 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.monthly/  oval:ssg-test_file_owner_cron_monthly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_monthly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.monthlyno valueoval:ssg-symlink_file_owner_cron_monthly_uid_0:ste:1oval:ssg-state_file_owner_cron_monthly_uid_0_0:ste:1
Verify Owner on cron.weeklyxccdf_org.ssgproject.content_rule_file_owner_cron_weekly mediumCCE-84190-8

Verify Owner on cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_weekly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_cron_weekly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84190-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.5, SV-257926r925765_rule

Description
To properly set the owner of /etc/cron.weekly, run the command:
$ sudo chown root /etc/cron.weekly 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/cron.weekly/  oval:ssg-test_file_owner_cron_weekly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_cron_weekly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.weeklyno valueoval:ssg-symlink_file_owner_cron_weekly_uid_0:ste:1oval:ssg-state_file_owner_cron_weekly_uid_0_0:ste:1
Verify Owner on crontabxccdf_org.ssgproject.content_rule_file_owner_crontab mediumCCE-84167-6

Verify Owner on crontab

Rule IDxccdf_org.ssgproject.content_rule_file_owner_crontab
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_crontab:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84167-6

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-232230, 5.1.2, SV-257926r925765_rule

Description
To properly set the owner of /etc/crontab, run the command:
$ sudo chown root /etc/crontab 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/crontab  oval:ssg-test_file_owner_crontab_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_crontab_0:obj:1 of type file_object
FilepathFilterFilter
/etc/crontaboval:ssg-symlink_file_owner_crontab_uid_0:ste:1oval:ssg-state_file_owner_crontab_uid_0_0:ste:1
Verify Permissions on cron.dxccdf_org.ssgproject.content_rule_file_permissions_cron_d mediumCCE-84183-3

Verify Permissions on cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_d
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_cron_d:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84183-3

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232040, 5.1.7, SV-257888r925651_rule

Description
To properly set the permissions of /etc/cron.d, run the command:
$ sudo chmod 0700 /etc/cron.d
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/cron.d/  oval:ssg-test_file_permissions_cron_d_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_cron_d_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dno valueoval:ssg-exclude_symlinks__cron_d:ste:1oval:ssg-state_file_permissions_cron_d_0_mode_0700or_stricter_:ste:1
Verify Permissions on cron.dailyxccdf_org.ssgproject.content_rule_file_permissions_cron_daily mediumCCE-84175-9

Verify Permissions on cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_daily
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_cron_daily:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84175-9

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232040, 5.1.4, SV-257888r925651_rule

Description
To properly set the permissions of /etc/cron.daily, run the command:
$ sudo chmod 0700 /etc/cron.daily
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/cron.daily/  oval:ssg-test_file_permissions_cron_daily_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_cron_daily_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.dailyno valueoval:ssg-exclude_symlinks__cron_daily:ste:1oval:ssg-state_file_permissions_cron_daily_0_mode_0700or_stricter_:ste:1
Verify Permissions on cron.hourlyxccdf_org.ssgproject.content_rule_file_permissions_cron_hourly mediumCCE-84173-4

Verify Permissions on cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_hourly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_cron_hourly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84173-4

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232040, 5.1.3, SV-257888r925651_rule

Description
To properly set the permissions of /etc/cron.hourly, run the command:
$ sudo chmod 0700 /etc/cron.hourly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/cron.hourly/  oval:ssg-test_file_permissions_cron_hourly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_cron_hourly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.hourlyno valueoval:ssg-exclude_symlinks__cron_hourly:ste:1oval:ssg-state_file_permissions_cron_hourly_0_mode_0700or_stricter_:ste:1
Verify Permissions on cron.monthlyxccdf_org.ssgproject.content_rule_file_permissions_cron_monthly mediumCCE-84181-7

Verify Permissions on cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_monthly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_cron_monthly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84181-7

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232040, 5.1.6, SV-257888r925651_rule

Description
To properly set the permissions of /etc/cron.monthly, run the command:
$ sudo chmod 0700 /etc/cron.monthly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/cron.monthly/  oval:ssg-test_file_permissions_cron_monthly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_cron_monthly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.monthlyno valueoval:ssg-exclude_symlinks__cron_monthly:ste:1oval:ssg-state_file_permissions_cron_monthly_0_mode_0700or_stricter_:ste:1
Verify Permissions on cron.weeklyxccdf_org.ssgproject.content_rule_file_permissions_cron_weekly mediumCCE-84187-4

Verify Permissions on cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_weekly
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_cron_weekly:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84187-4

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232040, 5.1.5, SV-257888r925651_rule

Description
To properly set the permissions of /etc/cron.weekly, run the command:
$ sudo chmod 0700 /etc/cron.weekly
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/cron.weekly/  oval:ssg-test_file_permissions_cron_weekly_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_cron_weekly_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/cron.weeklyno valueoval:ssg-exclude_symlinks__cron_weekly:ste:1oval:ssg-state_file_permissions_cron_weekly_0_mode_0700or_stricter_:ste:1
Verify Permissions on crontabxccdf_org.ssgproject.content_rule_file_permissions_crontab mediumCCE-84176-7

Verify Permissions on crontab

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_crontab
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_crontab:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84176-7

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-232265, 5.1.2, SV-257933r925786_rule

Description
To properly set the permissions of /etc/crontab, run the command:
$ sudo chmod 0600 /etc/crontab
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/crontab  oval:ssg-test_file_permissions_crontab_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_crontab_0:obj:1 of type file_object
FilepathFilterFilter
/etc/crontaboval:ssg-exclude_symlinks__crontab:ste:1oval:ssg-state_file_permissions_crontab_0_mode_0600or_stricter_:ste:1
Install fapolicyd Packagexccdf_org.ssgproject.content_rule_package_fapolicyd_installed mediumCCE-84224-5

Install fapolicyd Package

Rule IDxccdf_org.ssgproject.content_rule_package_fapolicyd_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_fapolicyd_installed:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84224-5

References:  CCI-001764, CCI-001774, CM-6(a), SI-4(22), SRG-OS-000370-GPOS-00155, SRG-OS-000368-GPOS-00154, SRG-OS-000480-GPOS-00230, RHEL-09-433010, SV-258089r926254_rule

Description
The fapolicyd package can be installed with the following command:
$ sudo dnf install fapolicyd
Rationale
fapolicyd (File Access Policy Daemon) implements application whitelisting to decide file access rights.
OVAL test results details

package fapolicyd is installed  oval:ssg-test_package_fapolicyd_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
fapolicydx86_64(none)100.el91.3.20:1.3.2-100.el9199e2f91fd431d51fapolicyd-0:1.3.2-100.el9.x86_64
Enable the File Access Policy Servicexccdf_org.ssgproject.content_rule_service_fapolicyd_enabled mediumCCE-84227-8

Enable the File Access Policy Service

Rule IDxccdf_org.ssgproject.content_rule_service_fapolicyd_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_fapolicyd_enabled:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84227-8

References:  CCI-001764, CCI-001774, CM-6(a), SI-4(22), FMT_SMF_EXT.1, SRG-OS-000370-GPOS-00155, SRG-OS-000368-GPOS-00154, SRG-OS-000480-GPOS-00230, RHEL-09-433015, SV-258090r926257_rule

Description
The File Access Policy service should be enabled. The fapolicyd service can be enabled with the following command:
$ sudo systemctl enable fapolicyd.service
Rationale
The fapolicyd service (File Access Policy Daemon) implements application whitelisting to decide file access rights.
OVAL test results details

package fapolicyd is installed  oval:ssg-test_service_fapolicyd_package_fapolicyd_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
fapolicydx86_64(none)100.el91.3.20:1.3.2-100.el9199e2f91fd431d51fapolicyd-0:1.3.2-100.el9.x86_64

Test that the fapolicyd service is running  oval:ssg-test_service_running_fapolicyd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
fapolicyd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_fapolicyd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_fapolicyd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Uninstall vsftpd Packagexccdf_org.ssgproject.content_rule_package_vsftpd_removed highCCE-84159-3

Uninstall vsftpd Package

Rule IDxccdf_org.ssgproject.content_rule_package_vsftpd_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_vsftpd_removed:def:1
Time2024-01-08T16:20:41+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84159-3

References:  A.8.SEC-RHEL4, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000197, CCI-000366, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), IA-5(1).1(v), CM-7, CM-7.1(ii), PR.IP-1, PR.PT-3, 2.2.4, SRG-OS-000074-GPOS-00042, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, RHEL-09-215015, 2.2.6, SV-257826r925465_rule

Description
The vsftpd package can be removed with the following command:
 $ sudo dnf erase vsftpd
Rationale
Removing the vsftpd package decreases the risk of its accidental activation.
OVAL test results details

package vsftpd is removed  oval:ssg-test_package_vsftpd_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_vsftpd_removed:obj:1 of type rpminfo_object
Name
vsftpd
Disable Kerberos by removing host keytabxccdf_org.ssgproject.content_rule_kerberos_disable_no_keytab mediumCCE-84221-1

Disable Kerberos by removing host keytab

Rule IDxccdf_org.ssgproject.content_rule_kerberos_disable_no_keytab
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84221-1

References:  CCI-000803, 0418, 1055, 1402, FTP_ITC_EXT.1, SRG-OS-000120-GPOS-00061, RHEL-09-611205, SV-258130r926377_rule

Description
Kerberos is not an approved key distribution method for Common Criteria. To prevent using Kerberos by system daemons, remove the Kerberos keytab files, especially /etc/krb5.keytab.
Rationale
The key derivation function (KDF) in Kerberos is not FIPS compatible.
Configure System to Forward All Mail For The Root Accountxccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias mediumCCE-90826-9

Configure System to Forward All Mail For The Root Account

Rule IDxccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-postfix_client_configure_mail_alias:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90826-9

References:  BP28(R49), CCI-000139, CCI-000366, CM-6(a), SRG-OS-000046-GPOS-00022, RHEL-09-653125, SV-258174r926509_rule

Description
Make sure that mails delivered to root user are forwarded to a monitored email address. Make sure that the address system.administrator@mail.mil is a valid email address reachable from the system in question. Use the following command to configure the alias:
$ sudo echo "root: system.administrator@mail.mil" >> /etc/aliases
$ sudo newaliases
Rationale
A number of system services utilize email messages sent to the root user to notify system administrators of active or impending issues. These messages must be forwarded to at least one monitored email address.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_postfix_root_mail_alias='system.administrator@mail.mil'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^root")

# shellcheck disable=SC2059
printf -v formatted_output "%s: %s" "$stripped_key" "$var_postfix_root_mail_alias"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^root\\>" "/etc/aliases"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^root\\>.*/$escaped_formatted_output/gi" "/etc/aliases"
else
    if [[ -s "/etc/aliases" ]] && [[ -n "$(tail -c 1 -- "/etc/aliases" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/aliases"
    fi
    cce="CCE-90826-9"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/aliases" >> "/etc/aliases"
    printf '%s\n' "$formatted_output" >> "/etc/aliases"
fi

if [ -f /usr/bin/newaliases ]; then
    newaliases
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_postfix_root_mail_alias # promote to variable
  set_fact:
    var_postfix_root_mail_alias: !!str system.administrator@mail.mil
  tags:
    - always

- name: Make sure that "/etc/aliases" has a defined value for root
  lineinfile:
    path: /etc/aliases
    line: 'root: {{ var_postfix_root_mail_alias }}'
    regexp: ^(?:[rR][oO][oO][tT]|"[rR][oO][oO][tT]")\s*:\s*(.+)$
    create: true
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90826-9
  - DISA-STIG-RHEL-09-653125
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - postfix_client_configure_mail_alias

- name: Check if newaliases command is available
  ansible.builtin.stat:
    path: /usr/bin/newaliases
  register: result_newaliases_present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90826-9
  - DISA-STIG-RHEL-09-653125
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - postfix_client_configure_mail_alias

- name: Update postfix aliases
  ansible.builtin.command:
    cmd: newaliases
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - result_newaliases_present.stat.exists
  tags:
  - CCE-90826-9
  - DISA-STIG-RHEL-09-653125
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - postfix_client_configure_mail_alias
OVAL test results details

Check if root has the correct mail alias.  oval:ssg-test_postfix_client_configure_mail_alias:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_root_mail_alias:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/aliases^(?:[rR][oO][oO][tT]|"[rR][oO][oO][tT]")\s*:\s*(.+)$1
Configure System to Forward All Mail From Postmaster to The Root Accountxccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias_postmaster mediumCCE-89064-0

Configure System to Forward All Mail From Postmaster to The Root Account

Rule IDxccdf_org.ssgproject.content_rule_postfix_client_configure_mail_alias_postmaster
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-postfix_client_configure_mail_alias_postmaster:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89064-0

References:  CCI-000139, AU-5(a), AU-5.1(ii), SRG-OS-000046-GPOS-00022, RHEL-09-252060, SV-257953r925846_rule

Description
Verify the administrators are notified in the event of an audit processing failure. Check that the "/etc/aliases" file has a defined value for "root".
$ sudo grep "postmaster:\s*root$" /etc/aliases

postmaster: root
Rationale
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded.
OVAL test results details

Check if postmaster has the correct mail alias  oval:ssg-test_postfix_client_configure_mail_alias_postmaster:tst:1  true

Following items have been found on the system:
PathContent
/etc/aliasespostmaster: root
Prevent Unrestricted Mail Relayingxccdf_org.ssgproject.content_rule_postfix_prevent_unrestricted_relay mediumCCE-87232-5

Prevent Unrestricted Mail Relaying

Rule IDxccdf_org.ssgproject.content_rule_postfix_prevent_unrestricted_relay
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87232-5

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-252050, SV-257951r925840_rule

Description
Modify the
/etc/postfix/main.cf
file to restrict client connections to the local network with the following command:
$ sudo postconf -e 'smtpd_client_restrictions = permit_mynetworks,reject'
Rationale
If unrestricted mail relaying is permitted, unauthorized senders could use this host as a mail relay for the purpose of sending spam or other unauthorized activity.
The s-nail Package Is Installedxccdf_org.ssgproject.content_rule_package_s-nail_installed mediumCCE-86608-7

The s-nail Package Is Installed

Rule IDxccdf_org.ssgproject.content_rule_package_s-nail_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_s-nail_installed:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86608-7

References:  CCI-001744, CM-3(5), SRG-OS-000363-GPOS-00150, RHEL-09-215095, SV-257842r925513_rule

Description
A mail server is required for sending emails. The s-nail package can be installed with the following command:
$ sudo dnf install s-nail
Rationale
Emails can be used to notify designated personnel about important system events such as failures or warnings.
OVAL test results details

package s-nail is installed  oval:ssg-test_package_s-nail_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
s-nailx86_64(none)6.el914.9.220:14.9.22-6.el9199e2f91fd431d51s-nail-0:14.9.22-6.el9.x86_64
Uninstall Sendmail Packagexccdf_org.ssgproject.content_rule_package_sendmail_removed mediumCCE-90830-1

Uninstall Sendmail Package

Rule IDxccdf_org.ssgproject.content_rule_package_sendmail_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_sendmail_removed:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90830-1

References:  BP28(R1), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, SRG-OS-000095-GPOS-00049, RHEL-09-215020, SV-257827r925468_rule

Description
Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command:
$ sudo dnf erase sendmail
Rationale
The sendmail software was not developed with security in mind and its design prevents it from being effectively contained by SELinux. Postfix should be used instead.
OVAL test results details

package sendmail is removed  oval:ssg-test_package_sendmail_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_sendmail_removed:obj:1 of type rpminfo_object
Name
sendmail
Mount Remote Filesystems with Kerberos Securityxccdf_org.ssgproject.content_rule_mount_option_krb_sec_remote_filesystems mediumCCE-87416-4

Mount Remote Filesystems with Kerberos Security

Rule IDxccdf_org.ssgproject.content_rule_mount_option_krb_sec_remote_filesystems
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_krb_sec_remote_filesystems:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87416-4

References:  1, 12, 14, 15, 16, 18, 3, 5, DSS05.04, DSS05.10, DSS06.10, CCI-000366, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.3, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.6.1.2, A.9.1.2, A.9.2.1, A.9.2.3, A.9.2.4, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), IA-2, IA-2(8), IA-2(9), AC-17(a), PR.AC-4, PR.AC-7, SRG-OS-000480-GPOS-00227, RHEL-09-231060, SV-257853r925546_rule

Description
Add the sec=krb5:krb5i:krb5p option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.
Rationale
When an NFS server is configured to use AUTH_SYS a selected userid and groupid are used to handle requests from the remote user. The userid and groupid could mistakenly or maliciously be set incorrectly. The AUTH_GSS method of authentication uses certificates on the server and client systems to more securely authenticate the remote mount request.
OVAL test results details

no nfs  oval:ssg-test_no_nfs_defined_etc_fstab_sec_krb5_krb5i_krb5p:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_nfs_defined_etc_fstab_sec_krb5_krb5i_krb5p:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0

all nfs has sec_krb5_krb5i_krb5p  oval:ssg-test_nfs_sec_krb5_krb5i_krb5p_etc_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nfs_sec_krb5_krb5i_krb5p_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0
Mount Remote Filesystems with nodevxccdf_org.ssgproject.content_rule_mount_option_nodev_remote_filesystems mediumCCE-90838-4

Mount Remote Filesystems with nodev

Rule IDxccdf_org.ssgproject.content_rule_mount_option_nodev_remote_filesystems
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_nodev_remote_filesystems:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90838-4

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CM-6(a), MP-2, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000480-GPOS-00227, RHEL-09-231065, SV-257854r925549_rule

Description
Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.
Rationale
Legitimate device files should only exist in the /dev directory. NFS mounts should not present device files to users.
OVAL test results details

no nfs  oval:ssg-test_no_nfs_defined_etc_fstab_nodev:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_nfs_defined_etc_fstab_nodev:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0

all nfs has nodev  oval:ssg-test_nfs_nodev_etc_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nfs_nodev_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0
Mount Remote Filesystems with noexecxccdf_org.ssgproject.content_rule_mount_option_noexec_remote_filesystems mediumCCE-84246-8

Mount Remote Filesystems with noexec

Rule IDxccdf_org.ssgproject.content_rule_mount_option_noexec_remote_filesystems
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_noexec_remote_filesystems:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84246-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-6, AC-6(8), AC-6(10), CM-6(a), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-231070, SV-257855r925552_rule

Description
Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.
Rationale
The noexec mount option causes the system not to execute binary files. This option must be used for mounting any file system not containing approved binary files as they may be incompatible. Executing files from untrusted file systems increases the opportunity for unprivileged users to attain unauthorized administrative access.
OVAL test results details

no nfs  oval:ssg-test_no_nfs_defined_etc_fstab_noexec:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_nfs_defined_etc_fstab_noexec:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0

all nfs has noexec  oval:ssg-test_nfs_noexec_etc_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nfs_noexec_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0
Mount Remote Filesystems with nosuidxccdf_org.ssgproject.content_rule_mount_option_nosuid_remote_filesystems mediumCCE-84247-6

Mount Remote Filesystems with nosuid

Rule IDxccdf_org.ssgproject.content_rule_mount_option_nosuid_remote_filesystems
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-mount_option_nosuid_remote_filesystems:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84247-6

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-6, AC-6(1), CM6(a), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-231075, SV-257856r925555_rule

Description
Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.
Rationale
NFS mounts should not present suid binaries to users. Only vendor-supplied suid executables should be installed to their default location on the local filesystem.
OVAL test results details

no nfs  oval:ssg-test_no_nfs_defined_etc_fstab_nosuid:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_nfs_defined_etc_fstab_nosuid:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0

all nfs has nosuid  oval:ssg-test_nfs_nosuid_etc_fstab:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_nfs_nosuid_etc_fstab:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/fstab^\s*\[?[\.\w:-]+\]?[:=][/\w-]+\s+[/\w\\-]+\s+nfs[4]?\s+(.*)$0
Uninstall nfs-utils Packagexccdf_org.ssgproject.content_rule_package_nfs-utils_removed lowCCE-84243-5

Uninstall nfs-utils Package

Rule IDxccdf_org.ssgproject.content_rule_package_nfs-utils_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_nfs-utils_removed:def:1
Time2024-01-08T16:20:41+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84243-5

References:  2.2.4, SRG-OS-000095-GPOS-00049, RHEL-09-215025, 2.2.16, SV-257828r925471_rule

Description
The nfs-utils package can be removed with the following command:
$ sudo dnf erase nfs-utils
Rationale
nfs-utils provides a daemon for the kernel NFS server and related tools. This package also contains the showmount program. showmount queries the mount daemon on a remote host for information about the Network File System (NFS) server on the remote host. For example, showmount can display the clients which are mounted on that host.
OVAL test results details

package nfs-utils is removed  oval:ssg-test_package_nfs-utils_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_nfs-utils_removed:obj:1 of type rpminfo_object
Name
nfs-utils
The Chrony package is installedxccdf_org.ssgproject.content_rule_package_chrony_installed mediumCCE-84215-3

The Chrony package is installed

Rule IDxccdf_org.ssgproject.content_rule_package_chrony_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_chrony_installed:def:1
Time2024-01-08T16:20:41+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84215-3

References:  BP28(R71), A.3.SEC-RHEL3, 0988, 1405, FMT_SMF_EXT.1, Req-10.4, 10.6.1, SRG-OS-000355-GPOS-00143, RHEL-09-252010, 2.1.1, SV-257943r925816_rule

Description
System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize their clocks to them. The chrony package can be installed with the following command:
$ sudo dnf install chrony
Rationale
Time synchronization is important to support time sensitive security mechanisms like Kerberos and also ensures log files have consistent time records across the enterprise, which aids in forensic investigations.
OVAL test results details

package chrony is installed  oval:ssg-test_package_chrony_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
chronyx86_64(none)1.el94.30:4.3-1.el9199e2f91fd431d51chrony-0:4.3-1.el9.x86_64
The Chronyd service is enabledxccdf_org.ssgproject.content_rule_service_chronyd_enabled mediumCCE-84217-9

The Chronyd service is enabled

Rule IDxccdf_org.ssgproject.content_rule_service_chronyd_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_chronyd_enabled:def:1
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84217-9

References:  0988, 1405, SRG-OS-000355-GPOS-00143, RHEL-09-252015, SV-257944r925819_rule

Description
chrony is a daemon which implements the Network Time Protocol (NTP) is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. To enable Chronyd service, you can run: # systemctl enable chronyd.service This recommendation only applies if chrony is in use on the system.
Rationale
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
OVAL test results details

package chrony is installed  oval:ssg-test_service_chronyd_package_chrony_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
chronyx86_64(none)1.el94.30:4.3-1.el9199e2f91fd431d51chrony-0:4.3-1.el9.x86_64

Test that the chronyd service is running  oval:ssg-test_service_running_chronyd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
chronyd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_chronyd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_chronyd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Disable chrony daemon from acting as serverxccdf_org.ssgproject.content_rule_chronyd_client_only lowCCE-87543-5

Disable chrony daemon from acting as server

Rule IDxccdf_org.ssgproject.content_rule_chronyd_client_only
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-chronyd_client_only:def:1
Time2024-01-08T16:20:42+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-87543-5

References:  CCI-000381, AU-8(1), AU-12(1), FMT_SMF_EXT.1, SRG-OS-000096-GPOS-00050, SRG-OS-000095-GPOS-00049, RHEL-09-252025, SV-257946r925825_rule

Description
The port option in /etc/chrony.conf can be set to 0 to make chrony daemon to never open any listening port for server operation and to operate strictly in a client-only mode.
Rationale
In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems. Operating systems are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by any one component. To support the requirements and principles of least functionality, the operating system must support the organizational requirements, providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business or to address authorized quality of life issues.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^port")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^port\\>" "/etc/chrony.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^port\\>.*/$escaped_formatted_output/gi" "/etc/chrony.conf"
else
    if [[ -s "/etc/chrony.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/chrony.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/chrony.conf"
    fi
    cce="CCE-87543-5"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/chrony.conf" >> "/etc/chrony.conf"
    printf '%s\n' "$formatted_output" >> "/etc/chrony.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable chrony daemon from acting as server
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/chrony.conf
      create: false
      regexp: ^\s*port\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/chrony.conf
    lineinfile:
      path: /etc/chrony.conf
      create: false
      regexp: ^\s*port\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/chrony.conf
    lineinfile:
      path: /etc/chrony.conf
      create: true
      regexp: ^\s*port\s+
      line: port 0
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-87543-5
  - DISA-STIG-RHEL-09-252025
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)
  - chronyd_client_only
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%20Allow%20for%20extra%20configuration%20files.%20This%20is%20useful%0A%23%20for%20admins%20specifying%20their%20own%20NTP%20servers%0Ainclude%20/etc/chrony.d/%2A.conf%0A%0A%23%20Set%20chronyd%20as%20client-only.%0Aport%200%0A%0A%23%20Disable%20chronyc%20from%20the%20network%0Acmdport%200%0A%0A%23%20Record%20the%20rate%20at%20which%20the%20system%20clock%20gains/losses%20time.%0Adriftfile%20/var/lib/chrony/drift%0A%0A%23%20Allow%20the%20system%20clock%20to%20be%20stepped%20in%20the%20first%20three%20updates%0A%23%20if%20its%20offset%20is%20larger%20than%201%20second.%0Amakestep%201.0%203%0A%0A%23%20Enable%20kernel%20synchronization%20of%20the%20real-time%20clock%20%28RTC%29.%0Artcsync%0A%0A%23%20Enable%20hardware%20timestamping%20on%20all%20interfaces%20that%20support%20it.%0A%23hwtimestamp%20%2A%0A%0A%23%20Increase%20the%20minimum%20number%20of%20selectable%20sources%20required%20to%20adjust%0A%23%20the%20system%20clock.%0A%23minsources%202%0A%0A%23%20Allow%20NTP%20client%20access%20from%20local%20network.%0A%23allow%20192.168.0.0/16%0A%0A%23%20Serve%20time%20even%20if%20not%20synchronized%20to%20a%20time%20source.%0A%23local%20stratum%2010%0A%0A%23%20Require%20authentication%20%28nts%20or%20key%20option%29%20for%20all%20NTP%20sources.%0A%23authselectmode%20require%0A%0A%23%20Specify%20file%20containing%20keys%20for%20NTP%20authentication.%0Akeyfile%20/etc/chrony.keys%0A%0A%23%20Insert/delete%20leap%20seconds%20by%20slewing%20instead%20of%20stepping.%0A%23leapsecmode%20slew%0A%0A%23%20Get%20TAI-UTC%20offset%20and%20leap%20seconds%20from%20the%20system%20tz%20database.%0Aleapsectz%20right/UTC%0A%0A%23%20Specify%20directory%20for%20log%20files.%0Alogdir%20/var/log/chrony%0A%0A%23%20Select%20which%20information%20is%20logged.%0A%23log%20measurements%20statistics%20tracking }}
        mode: 420
        overwrite: true
        path: /etc/chrony.conf
      - contents:
          source: data:,
        mode: 420
        overwrite: true
        path: /etc/chrony.d/.mco-keep
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20ntp%20server%0A%23%20%7B%7B.var_multiple_time_servers%7D%7D%20we%20have%20to%20put%20variable%20array%20name%20here%20for%20mutilines%20remediation%20%0A%7B%7B%24var_time_service_set_maxpoll%3A%3D.var_time_service_set_maxpoll%7D%7D%0A%7B%7Brange%20%24element%3A%3D.var_multiple_time_servers%7CtoArrayByComma%7D%7Dserver%20%7B%7B%24element%7D%7D%20minpoll%204%20maxpoll%20%7B%7B%24var_time_service_set_maxpoll%7D%7D%0A%7B%7Bend%7D%7D }}
        mode: 420
        overwrite: true
        path: /etc/chrony.d/ntp-server.conf
OVAL test results details

package chrony is installed  oval:ssg-test_service_chronyd_package_chrony_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
chronyx86_64(none)1.el94.30:4.3-1.el9199e2f91fd431d51chrony-0:4.3-1.el9.x86_64

Test that the chronyd service is running  oval:ssg-test_service_running_chronyd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
chronyd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_chronyd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_chronyd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

check if port is 0 in /etc/chrony.conf  oval:ssg-test_chronyd_client_only:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_chronyd_port_value:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/chrony.conf^\s*port[\s]+(\S+)1
Disable network management of chrony daemonxccdf_org.ssgproject.content_rule_chronyd_no_chronyc_network lowCCE-88876-8

Disable network management of chrony daemon

Rule IDxccdf_org.ssgproject.content_rule_chronyd_no_chronyc_network
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-chronyd_no_chronyc_network:def:1
Time2024-01-08T16:20:42+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-88876-8

References:  CCI-000381, CM-7(1), FMT_SMF_EXT.1, SRG-OS-000096-GPOS-00050, SRG-OS-000095-GPOS-00049, RHEL-09-252030, SV-257947r925828_rule

Description
The cmdport option in /etc/chrony.conf can be set to 0 to stop chrony daemon from listening on the UDP port 323 for management connections made by chronyc.
Rationale
Minimizing the exposure of the server functionality of the chrony daemon diminishes the attack surface.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^cmdport")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^cmdport\\>" "/etc/chrony.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^cmdport\\>.*/$escaped_formatted_output/gi" "/etc/chrony.conf"
else
    if [[ -s "/etc/chrony.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/chrony.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/chrony.conf"
    fi
    cce="CCE-88876-8"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/chrony.conf" >> "/etc/chrony.conf"
    printf '%s\n' "$formatted_output" >> "/etc/chrony.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable network management of chrony daemon
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/chrony.conf
      create: false
      regexp: ^\s*cmdport\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/chrony.conf
    lineinfile:
      path: /etc/chrony.conf
      create: false
      regexp: ^\s*cmdport\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/chrony.conf
    lineinfile:
      path: /etc/chrony.conf
      create: true
      regexp: ^\s*cmdport\s+
      line: cmdport 0
      state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88876-8
  - DISA-STIG-RHEL-09-252030
  - NIST-800-53-CM-7(1)
  - chronyd_no_chronyc_network
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%20Allow%20for%20extra%20configuration%20files.%20This%20is%20useful%0A%23%20for%20admins%20specifying%20their%20own%20NTP%20servers%0Ainclude%20/etc/chrony.d/%2A.conf%0A%0A%23%20Set%20chronyd%20as%20client-only.%0Aport%200%0A%0A%23%20Disable%20chronyc%20from%20the%20network%0Acmdport%200%0A%0A%23%20Record%20the%20rate%20at%20which%20the%20system%20clock%20gains/losses%20time.%0Adriftfile%20/var/lib/chrony/drift%0A%0A%23%20Allow%20the%20system%20clock%20to%20be%20stepped%20in%20the%20first%20three%20updates%0A%23%20if%20its%20offset%20is%20larger%20than%201%20second.%0Amakestep%201.0%203%0A%0A%23%20Enable%20kernel%20synchronization%20of%20the%20real-time%20clock%20%28RTC%29.%0Artcsync%0A%0A%23%20Enable%20hardware%20timestamping%20on%20all%20interfaces%20that%20support%20it.%0A%23hwtimestamp%20%2A%0A%0A%23%20Increase%20the%20minimum%20number%20of%20selectable%20sources%20required%20to%20adjust%0A%23%20the%20system%20clock.%0A%23minsources%202%0A%0A%23%20Allow%20NTP%20client%20access%20from%20local%20network.%0A%23allow%20192.168.0.0/16%0A%0A%23%20Serve%20time%20even%20if%20not%20synchronized%20to%20a%20time%20source.%0A%23local%20stratum%2010%0A%0A%23%20Require%20authentication%20%28nts%20or%20key%20option%29%20for%20all%20NTP%20sources.%0A%23authselectmode%20require%0A%0A%23%20Specify%20file%20containing%20keys%20for%20NTP%20authentication.%0Akeyfile%20/etc/chrony.keys%0A%0A%23%20Insert/delete%20leap%20seconds%20by%20slewing%20instead%20of%20stepping.%0A%23leapsecmode%20slew%0A%0A%23%20Get%20TAI-UTC%20offset%20and%20leap%20seconds%20from%20the%20system%20tz%20database.%0Aleapsectz%20right/UTC%0A%0A%23%20Specify%20directory%20for%20log%20files.%0Alogdir%20/var/log/chrony%0A%0A%23%20Select%20which%20information%20is%20logged.%0A%23log%20measurements%20statistics%20tracking }}
        mode: 420
        overwrite: true
        path: /etc/chrony.conf
      - contents:
          source: data:,
        mode: 420
        overwrite: true
        path: /etc/chrony.d/.mco-keep
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20ntp%20server%0A%23%20%7B%7B.var_multiple_time_servers%7D%7D%20we%20have%20to%20put%20variable%20array%20name%20here%20for%20mutilines%20remediation%20%0A%7B%7B%24var_time_service_set_maxpoll%3A%3D.var_time_service_set_maxpoll%7D%7D%0A%7B%7Brange%20%24element%3A%3D.var_multiple_time_servers%7CtoArrayByComma%7D%7Dserver%20%7B%7B%24element%7D%7D%20minpoll%204%20maxpoll%20%7B%7B%24var_time_service_set_maxpoll%7D%7D%0A%7B%7Bend%7D%7D }}
        mode: 420
        overwrite: true
        path: /etc/chrony.d/ntp-server.conf
OVAL test results details

package chrony is installed  oval:ssg-test_service_chronyd_package_chrony_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
chronyx86_64(none)1.el94.30:4.3-1.el9199e2f91fd431d51chrony-0:4.3-1.el9.x86_64

Test that the chronyd service is running  oval:ssg-test_service_running_chronyd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
chronyd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_chronyd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_chronyd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

check if cmdport is 0 in /etc/chrony.conf  oval:ssg-test_chronyd_no_chronyc_network:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_chronyd_cmdport_value:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/chrony.conf^\s*cmdport[\s]+(\S+)1
Configure Time Service Maxpoll Intervalxccdf_org.ssgproject.content_rule_chronyd_or_ntpd_set_maxpoll mediumCCE-88648-1

Configure Time Service Maxpoll Interval

Rule IDxccdf_org.ssgproject.content_rule_chronyd_or_ntpd_set_maxpoll
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-chronyd_or_ntpd_set_maxpoll:def:1
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88648-1

References:  1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-001891, CCI-002046, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), AU-8(1)(b), AU-12(1), PR.PT-1, SRG-OS-000355-GPOS-00143, SRG-OS-000356-GPOS-00144, SRG-OS-000359-GPOS-00146, RHEL-09-252020, SV-257945r925822_rule

Description
The maxpoll should be configured to 16 in /etc/ntp.conf or /etc/chrony.conf to continuously poll time servers. To configure maxpoll in /etc/ntp.conf or /etc/chrony.conf add the following after each `server`, `pool` or `peer` entry:
maxpoll 16
to
server
directives. If using chrony any
pool
directives should be configured too. If no server or pool directives are configured, the rule evaluates to pass.
Rationale
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints).

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { ( rpm --quiet -q chrony || rpm --quiet -q ntp ); }; then

var_time_service_set_maxpoll='16'




pof="/usr/sbin/pidof"


CONFIG_FILES="/etc/ntp.conf"
$pof ntpd || {
    CHRONY_NAME=/etc/chrony.conf
    CHRONY_PATH=${CHRONY_NAME%%.*}
    CONFIG_FILES=$(find ${CHRONY_PATH}.* -type f -name '*.conf')
}

# get list of ntp files

for config_file in $CONFIG_FILES; do
    # Set maxpoll values to var_time_service_set_maxpoll
    sed -i "s/^\(\(server\|pool\|peer\).*maxpoll\) [0-9][0-9]*\(.*\)$/\1 $var_time_service_set_maxpoll \3/" "$config_file"
done




for config_file in $CONFIG_FILES; do
    # Add maxpoll to server, pool or peer entries without maxpoll
    grep "^\(server\|pool\|peer\)" "$config_file" | grep -v maxpoll | while read -r line ; do
        sed -i "s/$line/& maxpoll $var_time_service_set_maxpoll/" "$config_file"
    done
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_time_service_set_maxpoll # promote to variable
  set_fact:
    var_time_service_set_maxpoll: !!str 16
  tags:
    - always

- name: Check that /etc/ntp.conf exist
  stat:
    path: /etc/ntp.conf
  register: ntp_conf_exist_result
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Update the maxpoll values in /etc/ntp.conf
  replace:
    path: /etc/ntp.conf
    regexp: ^(server.*maxpoll)[ ]+[0-9]+(.*)$
    replace: \1 {{ var_time_service_set_maxpoll }}\2
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  - ntp_conf_exist_result.stat.exists
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set the maxpoll values in /etc/ntp.conf
  replace:
    path: /etc/ntp.conf
    regexp: (^server\s+((?!maxpoll).)*)$
    replace: \1 maxpoll {{ var_time_service_set_maxpoll }}\n
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  - ntp_conf_exist_result.stat.exists
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check that /etc/chrony.conf exist
  stat:
    path: /etc/chrony.conf
  register: chrony_conf_exist_result
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Get get conf files from /etc/chrony.conf
  shell: |
    set -o pipefail
    CHRONY_NAME=/etc/chrony.conf
    CHRONY_PATH=${CHRONY_NAME%%.*}
    find ${CHRONY_PATH}.* -type f -name '*.conf'
  register: update_chrony_files
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  - chrony_conf_exist_result.stat.exists
  changed_when: false
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Update the maxpoll values in /etc/chrony.conf
  replace:
    path: '{{ item }}'
    regexp: ^((?:server|pool|peer).*maxpoll)[ ]+[0-9]+(.*)$
    replace: \1 {{ var_time_service_set_maxpoll }}\2
  loop: '{{ update_chrony_files.stdout_lines|list|flatten|unique }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  - chrony_conf_exist_result.stat.exists
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set the maxpoll values in /etc/chrony.conf
  replace:
    path: '{{ item }}'
    regexp: (^(?:server|pool|peer)\s+((?!maxpoll).)*)$
    replace: \1 maxpoll {{ var_time_service_set_maxpoll }}\n
  loop: '{{ update_chrony_files.stdout_lines|list|flatten|unique }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( "chrony" in ansible_facts.packages or "ntp" in ansible_facts.packages )
  - chrony_conf_exist_result.stat.exists
  tags:
  - CCE-88648-1
  - DISA-STIG-RHEL-09-252020
  - NIST-800-53-AU-12(1)
  - NIST-800-53-AU-8(1)(b)
  - NIST-800-53-CM-6(a)
  - chronyd_or_ntpd_set_maxpoll
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %23%20Allow%20for%20extra%20configuration%20files.%20This%20is%20useful%0A%23%20for%20admins%20specifying%20their%20own%20NTP%20servers%0Ainclude%20/etc/chrony.d/%2A.conf%0A%0A%23%20Set%20chronyd%20as%20client-only.%0Aport%200%0A%0A%23%20Disable%20chronyc%20from%20the%20network%0Acmdport%200%0A%0A%23%20Record%20the%20rate%20at%20which%20the%20system%20clock%20gains/losses%20time.%0Adriftfile%20/var/lib/chrony/drift%0A%0A%23%20Allow%20the%20system%20clock%20to%20be%20stepped%20in%20the%20first%20three%20updates%0A%23%20if%20its%20offset%20is%20larger%20than%201%20second.%0Amakestep%201.0%203%0A%0A%23%20Enable%20kernel%20synchronization%20of%20the%20real-time%20clock%20%28RTC%29.%0Artcsync%0A%0A%23%20Enable%20hardware%20timestamping%20on%20all%20interfaces%20that%20support%20it.%0A%23hwtimestamp%20%2A%0A%0A%23%20Increase%20the%20minimum%20number%20of%20selectable%20sources%20required%20to%20adjust%0A%23%20the%20system%20clock.%0A%23minsources%202%0A%0A%23%20Allow%20NTP%20client%20access%20from%20local%20network.%0A%23allow%20192.168.0.0/16%0A%0A%23%20Serve%20time%20even%20if%20not%20synchronized%20to%20a%20time%20source.%0A%23local%20stratum%2010%0A%0A%23%20Require%20authentication%20%28nts%20or%20key%20option%29%20for%20all%20NTP%20sources.%0A%23authselectmode%20require%0A%0A%23%20Specify%20file%20containing%20keys%20for%20NTP%20authentication.%0Akeyfile%20/etc/chrony.keys%0A%0A%23%20Insert/delete%20leap%20seconds%20by%20slewing%20instead%20of%20stepping.%0A%23leapsecmode%20slew%0A%0A%23%20Get%20TAI-UTC%20offset%20and%20leap%20seconds%20from%20the%20system%20tz%20database.%0Aleapsectz%20right/UTC%0A%0A%23%20Specify%20directory%20for%20log%20files.%0Alogdir%20/var/log/chrony%0A%0A%23%20Select%20which%20information%20is%20logged.%0A%23log%20measurements%20statistics%20tracking }}
        mode: 420
        overwrite: true
        path: /etc/chrony.conf
      - contents:
          source: data:,
        mode: 420
        overwrite: true
        path: /etc/chrony.d/.mco-keep
      - contents:
          source: data:,{{ %23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20ntp%20server%0A%23%20%7B%7B.var_multiple_time_servers%7D%7D%20we%20have%20to%20put%20variable%20array%20name%20here%20for%20mutilines%20remediation%20%0A%7B%7B%24var_time_service_set_maxpoll%3A%3D.var_time_service_set_maxpoll%7D%7D%0A%7B%7Brange%20%24element%3A%3D.var_multiple_time_servers%7CtoArrayByComma%7D%7Dserver%20%7B%7B%24element%7D%7D%20minpoll%204%20maxpoll%20%7B%7B%24var_time_service_set_maxpoll%7D%7D%0A%7B%7Bend%7D%7D }}
        mode: 420
        overwrite: true
        path: /etc/chrony.d/ntp-server.conf
OVAL test results details

check if no server entries in /etc/ntp.conf  oval:ssg-test_ntp_no_server:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_ntp_no_server_nor_pool:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ntp.conf^server.*1

check if maxpoll is set in /etc/ntp.conf  oval:ssg-test_ntp_set_maxpoll:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ntp_set_maxpoll:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ntp.conf^server[\s]+[\S]+.*maxpoll[\s]+(\d+)1

check if all server entries have maxpoll set in /etc/ntp.conf  oval:ssg-test_ntp_all_server_has_maxpoll:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_ntp_all_server_has_maxpoll:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ntp.conf^server[\s]+[\S]+[\s]+(.*)1

check if no server entries have server or pool set in /etc/chrony.conf  oval:ssg-test_chrony_no_server_nor_pool:tst:1  false

Following items have been found on the system:
PathContent
/etc/chrony.confpool 2.rhel.pool.ntp.org iburst

check if maxpoll is set in /etc/chrony.conf  oval:ssg-test_chrony_set_maxpoll:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_chrony_set_maxpoll:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/chrony\.(conf|d/.+\.conf)$^(?:server|pool|peer)[\s]+[\S]+.*maxpoll[\s]+(\d+)1

check if all server entries have maxpoll set in /etc/chrony.conf  oval:ssg-test_chrony_all_server_has_maxpoll:tst:1  false

Following items have been found on the system:
PathContent
/etc/chrony.confpool 2.rhel.pool.ntp.org iburst
Ensure Chrony is only configured with the server directivexccdf_org.ssgproject.content_rule_chronyd_server_directive mediumCCE-87077-4

Ensure Chrony is only configured with the server directive

Rule IDxccdf_org.ssgproject.content_rule_chronyd_server_directive
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-chronyd_server_directive:def:1
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87077-4

References:  CCI-001891, SRG-OS-000355-GPOS-00143, SRG-OS-000356-GPOS-00144, SRG-OS-000359-GPOS-00146, RHEL-09-252020, SV-257945r925822_rule

Description
Check that Chrony only has time sources configured with the server directive.
Rationale
Depending on the infrastructure being used the pool directive may not be supported.
Warnings
warning  This rule doesn't come with a remediation, the time source needs to be added by the administrator.
OVAL test results details

Ensure at least one time source is set with server directive  oval:ssg-test_chronyd_server_directive_with_server:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_chronyd_server_directive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/chrony\.(conf|d/.+\.conf)$^[\s]*server.*$1

Ensure no time source is set with pool directive  oval:ssg-test_chronyd_server_directive_no_pool:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_chronyd_no_pool_directive:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/chrony\.(conf|d/.+\.conf)$^[\s]+pool.*$1
Uninstall ypserv Packagexccdf_org.ssgproject.content_rule_package_ypserv_removed highCCE-84152-8

Uninstall ypserv Package

Rule IDxccdf_org.ssgproject.content_rule_package_ypserv_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_ypserv_removed:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84152-8

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, Req-2.2.2, 2.2.4, SRG-OS-000095-GPOS-00049, RHEL-09-215030, SV-257829r925474_rule

Description
The ypserv package can be removed with the following command:
$ sudo dnf erase ypserv
Rationale
The NIS service provides an unencrypted authentication service which does not provide for the confidentiality and integrity of user passwords or the remote session. Removing the ypserv package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.
OVAL test results details

package ypserv is removed  oval:ssg-test_package_ypserv_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_ypserv_removed:obj:1 of type rpminfo_object
Name
ypserv
Uninstall rsh-server Packagexccdf_org.ssgproject.content_rule_package_rsh-server_removed highCCE-84143-7

Uninstall rsh-server Package

Rule IDxccdf_org.ssgproject.content_rule_package_rsh-server_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_rsh-server_removed:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84143-7

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000095-GPOS-00049, RHEL-09-215035, SV-257830r925477_rule

Description
The rsh-server package can be removed with the following command:
$ sudo dnf erase rsh-server
Rationale
The rsh-server service provides unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session and has very weak authentication. If a privileged user were to login using this service, the privileged user password could be compromised. The rsh-server package provides several obsolete and insecure network services. Removing it decreases the risk of those services' accidental (or intentional) activation.
OVAL test results details

package rsh-server is removed  oval:ssg-test_package_rsh-server_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_rsh-server_removed:obj:1 of type rpminfo_object
Name
rsh-server
Remove Host-Based Authentication Filesxccdf_org.ssgproject.content_rule_no_host_based_files highCCE-90208-0

Remove Host-Based Authentication Files

Rule IDxccdf_org.ssgproject.content_rule_no_host_based_files
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-no_host_based_files:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-90208-0

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-252070, SV-257955r925852_rule

Description
The shosts.equiv file lists remote hosts and users that are trusted by the local system. To remove these files, run the following command to delete them from any location:
$ sudo rm /[path]/[to]/[file]/shosts.equiv
Rationale
The shosts.equiv files are used to configure host-based authentication for the system via SSH. Host-based authentication is not sufficient for preventing unauthorized access to the system, as it does not require interactive identification and authentication of a connection request, or for the use of two-factor authentication.
OVAL test results details

look for shosts.equiv in /  oval:ssg-test_no_shosts_equiv:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_shosts_equiv_files_root:obj:1 of type file_object
BehaviorsPathFilename
no value/shosts.equiv
Remove User Host-Based Authentication Filesxccdf_org.ssgproject.content_rule_no_user_host_based_files highCCE-86532-9

Remove User Host-Based Authentication Files

Rule IDxccdf_org.ssgproject.content_rule_no_user_host_based_files
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-no_user_host_based_files:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-86532-9

References:  CCI-000366, SRG-OS-000480-GPOS-00227, RHEL-09-252075, SV-257956r925855_rule

Description
The ~/.shosts (in each user's home directory) files list remote hosts and users that are trusted by the local system. To remove these files, run the following command to delete them from any location:
$ sudo find / -name '.shosts' -type f -delete
Rationale
The .shosts files are used to configure host-based authentication for individual users or the system via SSH. Host-based authentication is not sufficient for preventing unauthorized access to the system, as it does not require interactive identification and authentication of a connection request, or for the use of two-factor authentication.
OVAL test results details

look for .shosts in /  oval:ssg-test_no_shosts:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_no_shosts_files_root:obj:1 of type file_object
BehaviorsPathFilename
no value/.shosts
Uninstall telnet-server Packagexccdf_org.ssgproject.content_rule_package_telnet-server_removed highCCE-84149-4

Uninstall telnet-server Package

Rule IDxccdf_org.ssgproject.content_rule_package_telnet-server_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_telnet-server_removed:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84149-4

References:  BP28(R1), A.8.SEC-RHEL4, 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, Req-2.2.2, 2.2.4, SRG-OS-000095-GPOS-00049, RHEL-09-215040, 2.2.13, SV-257831r925480_rule

Description
The telnet-server package can be removed with the following command:
$ sudo dnf erase telnet-server
Rationale
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities are often overlooked and therefore may remain unsecure. They increase the risk to the platform by providing additional attack vectors.
The telnet service provides an unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using this service, the privileged user password could be compromised.
Removing the telnet-server package decreases the risk of the telnet service's accidental (or intentional) activation.
OVAL test results details

package telnet-server is removed  oval:ssg-test_package_telnet-server_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_telnet-server_removed:obj:1 of type rpminfo_object
Name
telnet-server
Uninstall tftp-server Packagexccdf_org.ssgproject.content_rule_package_tftp-server_removed highCCE-84154-4

Uninstall tftp-server Package

Rule IDxccdf_org.ssgproject.content_rule_package_tftp-server_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_tftp-server_removed:def:1
Time2024-01-08T16:20:42+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-84154-4

References:  BP28(R1), A.8.SEC-RHEL4, 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000318, CCI-000366, CCI-000368, CCI-001812, CCI-001813, CCI-001814, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-215060, 2.2.7, SV-257835r925492_rule

Description
The tftp-server package can be removed with the following command:
 $ sudo dnf erase tftp-server
Rationale
Removing the tftp-server package decreases the risk of the accidental (or intentional) activation of tftp services.

If TFTP is required for operational support (such as transmission of router configurations), its use must be documented with the Information Systems Securty Manager (ISSM), restricted to only authorized personnel, and have access control rules established.
OVAL test results details

package tftp-server is removed  oval:ssg-test_package_tftp-server_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_tftp-server_removed:obj:1 of type rpminfo_object
Name
tftp-server
Ensure tftp Daemon Uses Secure Modexccdf_org.ssgproject.content_rule_tftpd_uses_secure_mode mediumCCE-90736-0

Ensure tftp Daemon Uses Secure Mode

Rule IDxccdf_org.ssgproject.content_rule_tftpd_uses_secure_mode
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90736-0

References:  11, 12, 13, 14, 15, 16, 18, 3, 5, 8, 9, APO01.06, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(b), AC-6, CM-7(a), PR.AC-3, PR.AC-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-252055, SV-257952r925843_rule

Description
If running the Trivial File Transfer Protocol (TFTP) service is necessary, it should be configured to change its root directory at startup. To do so, find the path for the tftp systemd service:
$ sudo systemctl show tftp | grep FragmentPath=
FragmentPath=/etc/systemd/system/tftp.service
and ensure the ExecStart line on that file includes the -s option with a subdirectory:
ExecStart=/usr/sbin/in.tftpd -s /var/lib/tftpboot
Rationale
Using the -s option causes the TFTP service to only serve files from the given directory. Serving files from an intentionally-specified directory reduces the risk of sharing files which should remain private.
Uninstall quagga Packagexccdf_org.ssgproject.content_rule_package_quagga_removed lowCCE-84191-6

Uninstall quagga Package

Rule IDxccdf_org.ssgproject.content_rule_package_quagga_removed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_quagga_removed:def:1
Time2024-01-08T16:20:42+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84191-6

References:  12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-7(a), CM-7(b), CM-6(a), PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-215065, SV-257836r925495_rule

Description
The quagga package can be removed with the following command:
 $ sudo dnf erase quagga
Rationale
Routing software is typically used on routers to exchange network topology information with other routers. If routing software is used when not required, system network information may be unnecessarily transmitted across the network.
If there is no need to make the router software available, removing it provides a safeguard against its activation.
OVAL test results details

package quagga is removed  oval:ssg-test_package_quagga_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_quagga_removed:obj:1 of type rpminfo_object
Name
quagga
Verify the SSH Private Key Files Have a Passcodexccdf_org.ssgproject.content_rule_ssh_keys_passphrase_protected mediumCCE-86553-5

Verify the SSH Private Key Files Have a Passcode

Rule IDxccdf_org.ssgproject.content_rule_ssh_keys_passphrase_protected
Result
notchecked
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86553-5

References:  SRG-OS-000067-GPOS-00035, RHEL-09-611190, SV-258127r926368_rule

Description
When creating SSH key pairs, always use a passcode.
You can create such keys with the following command:
$ sudo ssh-keygen -n [passphrase]
Red Hat Enterprise Linux 9, for certificate-based authentication, must enforce authorized access to the corresponding private key.
Rationale
If an unauthorized user obtains access to a private key without a passcode, that user would have unauthorized access to any system where the associated public key has been installed.
Evaluation messages
info 
No candidate or applicable check found.
Set SSH Client Alive Count Maxxccdf_org.ssgproject.content_rule_sshd_set_keepalive mediumCCE-90805-3

Set SSH Client Alive Count Max

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_keepalive
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_set_keepalive:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90805-3

References:  BP28(R32), A.5.SEC-RHEL7, 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-000879, CCI-001133, CCI-002361, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, 8.2.8, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, RHEL-09-255095, 5.2.20, SV-257995r925972_rule

Description
The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered unresponsive and terminated. For SSH earlier than v8.2, a ClientAliveCountMax value of 0 causes a timeout precisely when the ClientAliveInterval is set. Starting with v8.2, a value of 0 disables the timeout functionality completely. If the option is set to a number greater than 0, then the session will be disconnected after ClientAliveInterval * ClientAliveCountMax seconds without receiving a keep alive message.
Rationale
This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_keepalive='0'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 0
  tags:
    - always

- name: Set SSH Client Alive Count Max
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90805-3
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255095
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Check the value of ClientAliveCountMax setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_set_keepalive_clientalivecountmax:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_sshd_set_keepalive_clientalivecountmax:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)ClientAliveCountMax(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Check the value of ClientAliveCountMax setting in /etc/ssh/sshd_config.d/ files  oval:ssg-test_sshd_set_keepalive_clientalivecountmax_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_sshd_set_keepalive_clientalivecountmax_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)ClientAliveCountMax(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1
Disable Host-Based Authenticationxccdf_org.ssgproject.content_rule_disable_host_auth mediumCCE-90816-0

Disable Host-Based Authentication

Rule IDxccdf_org.ssgproject.content_rule_disable_host_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-disable_host_auth:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90816-0

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-3, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, 8.3.1, SRG-OS-000480-GPOS-00229, RHEL-09-255080, 5.2.8, SV-257992r925963_rule

Description
SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.
The default SSH configuration disables host-based authentication. The appropriate configuration is used if no value is set for HostbasedAuthentication.
To explicitly disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
HostbasedAuthentication no
Rationale
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable Host-Based Authentication
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "HostbasedAuthentication"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter HostbasedAuthentication is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "HostbasedAuthentication"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "HostbasedAuthentication"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "HostbasedAuthentication"| regex_escape }}\s+
      line: HostbasedAuthentication no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90816-0
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255080
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%09%24OpenBSD%3A%20sshd_config%2Cv%201.103%202018%2F04%2F09%2020%3A41%3A22%20tj%20Exp%20%24%0A%0A%23%20This%20is%20the%20sshd%20server%20system-wide%20configuration%20file.%20%20See%0A%23%20sshd_config%285%29%20for%20more%20information.%0A%0A%23%20This%20sshd%20was%20compiled%20with%20PATH%3D%2Fusr%2Flocal%2Fbin%3A%2Fusr%2Fbin%3A%2Fusr%2Flocal%2Fsbin%3A%2Fusr%2Fsbin%0A%0A%23%20The%20strategy%20used%20for%20options%20in%20the%20default%20sshd_config%20shipped%20with%0A%23%20OpenSSH%20is%20to%20specify%20options%20with%20their%20default%20value%20where%0A%23%20possible%2C%20but%20leave%20them%20commented.%20%20Uncommented%20options%20override%20the%0A%23%20default%20value.%0A%0A%23%20If%20you%20want%20to%20change%20the%20port%20on%20a%20SELinux%20system%2C%20you%20have%20to%20tell%0A%23%20SELinux%20about%20this%20change.%0A%23%20semanage%20port%20-a%20-t%20ssh_port_t%20-p%20tcp%20%23PORTNUMBER%0A%23%0A%23Port%2022%0A%23AddressFamily%20any%0A%23ListenAddress%200.0.0.0%0A%23ListenAddress%20%3A%3A%0A%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_rsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ecdsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ed25519_key%0A%0A%23%20Ciphers%20and%20keying%0ARekeyLimit%20512M%201h%0A%0A%23%20System-wide%20Crypto%20policy%3A%0A%23%20This%20system%20is%20following%20system-wide%20crypto%20policy.%20The%20changes%20to%0A%23%20Ciphers%2C%20MACs%2C%20KexAlgoritms%20and%20GSSAPIKexAlgorithsm%20will%20not%20have%20any%0A%23%20effect%20here.%20They%20will%20be%20overridden%20by%20command-line%20options%20passed%20on%0A%23%20the%20server%20start%20up.%0A%23%20To%20opt%20out%2C%20uncomment%20a%20line%20with%20redefinition%20of%20%20CRYPTO_POLICY%3D%0A%23%20variable%20in%20%20%2Fetc%2Fsysconfig%2Fsshd%20%20to%20overwrite%20the%20policy.%0A%23%20For%20more%20information%2C%20see%20manual%20page%20for%20update-crypto-policies%288%29.%0A%0A%23%20Logging%0A%23SyslogFacility%20AUTH%0ASyslogFacility%20AUTHPRIV%0A%23LogLevel%20INFO%0A%0A%23%20Authentication%3A%0A%0A%23LoginGraceTime%202m%0APermitRootLogin%20no%0AStrictModes%20yes%0A%23MaxAuthTries%206%0A%23MaxSessions%2010%0A%0APubkeyAuthentication%20yes%0A%0A%23%20The%20default%20is%20to%20check%20both%20.ssh%2Fauthorized_keys%20and%20.ssh%2Fauthorized_keys2%0A%23%20but%20this%20is%20overridden%20so%20installations%20will%20only%20check%20.ssh%2Fauthorized_keys%0AAuthorizedKeysFile%09.ssh%2Fauthorized_keys%0A%0A%23AuthorizedPrincipalsFile%20none%0A%0A%23AuthorizedKeysCommand%20none%0A%23AuthorizedKeysCommandUser%20nobody%0A%0A%23%20For%20this%20to%20work%20you%20will%20also%20need%20host%20keys%20in%20%2Fetc%2Fssh%2Fssh_known_hosts%0AHostbasedAuthentication%20no%0A%23%20Change%20to%20yes%20if%20you%20don%27t%20trust%20~%2F.ssh%2Fknown_hosts%20for%0A%23%20HostbasedAuthentication%0AIgnoreUserKnownHosts%20yes%0A%23%20Don%27t%20read%20the%20user%27s%20~%2F.rhosts%20and%20~%2F.shosts%20files%0AIgnoreRhosts%20yes%0A%0A%23%20To%20disable%20tunneled%20clear%20text%20passwords%2C%20change%20to%20no%20here%21%0A%23PasswordAuthentication%20yes%0APermitEmptyPasswords%20no%0APasswordAuthentication%20no%0A%0A%23%20Change%20to%20no%20to%20disable%20s%2Fkey%20passwords%0A%23ChallengeResponseAuthentication%20yes%0AChallengeResponseAuthentication%20no%0A%0A%23%20Kerberos%20options%0AKerberosAuthentication%20no%0A%23KerberosOrLocalPasswd%20yes%0A%23KerberosTicketCleanup%20yes%0A%23KerberosGetAFSToken%20no%0A%23KerberosUseKuserok%20yes%0A%0A%23%20GSSAPI%20options%0AGSSAPIAuthentication%20no%0AGSSAPICleanupCredentials%20no%0A%23GSSAPIStrictAcceptorCheck%20yes%0A%23GSSAPIKeyExchange%20no%0A%23GSSAPIEnablek5users%20no%0A%0A%23%20Set%20this%20to%20%27yes%27%20to%20enable%20PAM%20authentication%2C%20account%20processing%2C%0A%23%20and%20session%20processing.%20If%20this%20is%20enabled%2C%20PAM%20authentication%20will%0A%23%20be%20allowed%20through%20the%20ChallengeResponseAuthentication%20and%0A%23%20PasswordAuthentication.%20%20Depending%20on%20your%20PAM%20configuration%2C%0A%23%20PAM%20authentication%20via%20ChallengeResponseAuthentication%20may%20bypass%0A%23%20the%20setting%20of%20%22PermitRootLogin%20without-password%22.%0A%23%20If%20you%20just%20want%20the%20PAM%20account%20and%20session%20checks%20to%20run%20without%0A%23%20PAM%20authentication%2C%20then%20enable%20this%20but%20set%20PasswordAuthentication%0A%23%20and%20ChallengeResponseAuthentication%20to%20%27no%27.%0A%23%20WARNING%3A%20%27UsePAM%20no%27%20is%20not%20supported%20in%20Fedora%20and%20may%20cause%20several%0A%23%20problems.%0AUsePAM%20yes%0A%0A%23AllowAgentForwarding%20yes%0A%23AllowTcpForwarding%20yes%0A%23GatewayPorts%20no%0AX11Forwarding%20yes%0A%23X11DisplayOffset%2010%0A%23X11UseLocalhost%20yes%0A%23PermitTTY%20yes%0A%0A%23%20It%20is%20recommended%20to%20use%20pam_motd%20in%20%2Fetc%2Fpam.d%2Fsshd%20instead%20of%20PrintMotd%2C%0A%23%20as%20it%20is%20more%20configurable%20and%20versatile%20than%20the%20built-in%20version.%0APrintMotd%20no%0A%0APrintLastLog%20yes%0A%23TCPKeepAlive%20yes%0APermitUserEnvironment%20no%0ACompression%20no%0AClientAliveInterval%20600%0AClientAliveCountMax%200%0A%23UseDNS%20no%0A%23PidFile%20%2Fvar%2Frun%2Fsshd.pid%0A%23MaxStartups%2010%3A30%3A100%0A%23PermitTunnel%20no%0A%23ChrootDirectory%20none%0A%23VersionAddendum%20none%0A%0A%23%20no%20default%20banner%20path%0ABanner%20%2Fetc%2Fissue%0A%0A%23%20Accept%20locale-related%20environment%20variables%0AAcceptEnv%20LANG%20LC_CTYPE%20LC_NUMERIC%20LC_TIME%20LC_COLLATE%20LC_MONETARY%20LC_MESSAGES%0AAcceptEnv%20LC_PAPER%20LC_NAME%20LC_ADDRESS%20LC_TELEPHONE%20LC_MEASUREMENT%0AAcceptEnv%20LC_IDENTIFICATION%20LC_ALL%20LANGUAGE%0AAcceptEnv%20XMODIFIERS%0A%0A%23%20override%20default%20of%20no%20subsystems%0ASubsystem%09sftp%09%2Fusr%2Flibexec%2Fopenssh%2Fsftp-server%0A%0A%23%20Example%20of%20overriding%20settings%20on%20a%20per-user%20basis%0A%23Match%20User%20anoncvs%0A%23%09X11Forwarding%20no%0A%23%09AllowTcpForwarding%20no%0A%23%09PermitTTY%20no%0A%23%09ForceCommand%20cvs%20server%0A%0AUsePrivilegeSeparation%20sandbox
        mode: 0600
        path: /etc/ssh/sshd_config
        overwrite: true
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of HostbasedAuthentication setting in the /etc/ssh/sshd_config file  oval:ssg-test_disable_host_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_disable_host_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)HostbasedAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of HostbasedAuthentication setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_disable_host_auth_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_disable_host_auth_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)HostbasedAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of HostbasedAuthentication is present  oval:ssg-test_HostbasedAuthentication_present_disable_host_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_disable_host_auth:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_disable_host_auth:obj:1 oval:ssg-obj_disable_host_auth_config_dir:obj:1
Enable SSH Server firewalld Firewall Exceptionxccdf_org.ssgproject.content_rule_firewalld_sshd_port_enabled mediumCCE-89175-4

Enable SSH Server firewalld Firewall Exception

Rule IDxccdf_org.ssgproject.content_rule_firewalld_sshd_port_enabled
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-firewalld_sshd_port_enabled:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89175-4

References:  3.1.12, 1416, AC-17(a), CM-6(b), CM-7(a), CM-7(b), SRG-OS-000096-GPOS-00050, RHEL-09-251035, SV-257940r925807_rule

Description
If the SSH server is in use, inbound connections to SSH's port should be allowed to permit remote access through SSH. In more restrictive firewalld settings, the SSH port should be added to the proper firewalld zone in order to allow SSH remote access.

To configure firewalld to allow ssh access, run the following command(s):
firewall-cmd --permanent --add-service=ssh
Then run the following command to load the newly created rule(s):
firewall-cmd --reload
Rationale
If inbound SSH connections are expected, adding the SSH port to the proper firewalld zone will allow remote access through the SSH port.
Warnings
warning  The remediation for this rule uses firewall-cmd and nmcli tools. Therefore, it will only be executed if firewalld and NetworkManager services are running. Otherwise, the remediation will be aborted and a informative message will be shown in the remediation report. These respective services will not be started in order to preserve any intentional change in network components related to firewall and network interfaces.
warning  This rule also checks if the SSH port was modified by the administrator in the firewalld services definitions and is reflecting the expected port number. Although this is checked, fixing the custom ssh.xml file placed by the administrator at /etc/firewalld/services it is not in the scope of the remediation since there is no reliable way to manually change the respective file. If the default SSH port is modified, it is on the administrator responsibility to ensure the firewalld customizations in the service port level are properly configured.
warning  Red Hat Enterprise Linux 9 prefers and recommends to use NetworkManager keyfiles instead of the ifcfg files stored in /etc/sysconfig/network-scripts. Therefore, if the system was upgraded from a previous release, make sure the NIC configuration files are properly migrated from ifcfg format to NetworkManager keyfiles. Otherwise, this rule won't be able to check the configuration. The migration can be accomplished by nmcli connection migrate command.

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "firewalld" ; then
    dnf install -y "firewalld"
fi
if ! rpm -q --quiet "NetworkManager" ; then
    dnf install -y "NetworkManager"
fi
firewalld_sshd_zone='public'


if systemctl is-active NetworkManager && systemctl is-active firewalld; then
    # First make sure the SSH service is enabled in run-time for the proper zone.
    # This is to avoid connection issues when new interfaces are addeded to this zone.
    firewall-cmd --zone="$firewalld_sshd_zone" --add-service=ssh

    # This will collect all NetworkManager connections names
    readarray -t nm_connections < <(nmcli -f UUID,TYPE con | grep ethernet | awk '{ print $1 }')
    # If the connection is not yet assigned to a firewalld zone, assign it to the proper zone.
    # This will not change connections which are already assigned to any firewalld zone.
    for connection in "${nm_connections[@]}"; do
        current_zone=$(nmcli -f connection.zone connection show "$connection" | awk '{ print $2}')
        if [ $current_zone = "--" ]; then
            nmcli connection modify "$connection" connection.zone $firewalld_sshd_zone
        fi
    done
    systemctl restart NetworkManager

    # Active zones are zones with at least one interface assigned to it.
    # It is possible that traffic is comming by any active interface and consequently any
    # active zone. So, this make sure all active zones are permanently allowing SSH service.
    readarray -t firewalld_active_zones < <(firewall-cmd --get-active-zones | grep -v interfaces)
    for zone in "${firewalld_active_zones[@]}"; do
        firewall-cmd --permanent --zone="$zone" --add-service=ssh
    done
    firewall-cmd --reload
else
    echo "
    firewalld and NetworkManager services are not active. Remediation aborted!
    This remediation could not be applied because it depends on firewalld and NetworkManager services running.
    The service is not started by this remediation in order to prevent connection issues."
    exit 1
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value firewalld_sshd_zone # promote to variable
  set_fact:
    firewalld_sshd_zone: !!str public
  tags:
    - always

- name: Enable SSH Server firewalld Firewall Exception - Ensure firewalld and NetworkManager
    packages are installed
  ansible.builtin.package:
    name: '{{ item }}'
    state: present
  with_items:
  - firewalld
  - NetworkManager
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89175-4
  - DISA-STIG-RHEL-09-251035
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - firewalld_sshd_port_enabled
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable SSH Server firewalld Firewall Exception - Collect facts about system
    services
  ansible.builtin.service_facts: null
  register: result_services_states
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89175-4
  - DISA-STIG-RHEL-09-251035
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - firewalld_sshd_port_enabled
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable SSH Server firewalld Firewall Exception - Remediation is applicable
    if firewalld and NetworkManager services are running
  block:

  - name: Enable SSH Server firewalld Firewall Exception - Collect NetworkManager
      connections names
    ansible.builtin.shell:
      cmd: nmcli -f UUID,TYPE con | grep ethernet | awk '{ print $1 }'
    register: result_nmcli_cmd_connections_names
    changed_when: false

  - name: Enable SSH Server firewalld Firewall Exception - Collect NetworkManager
      connections zones
    ansible.builtin.shell:
      cmd: nmcli -f connection.zone connection show {{ item | trim }} | awk '{ print
        $2}'
    register: result_nmcli_cmd_connections_zones
    changed_when: false
    with_items:
    - '{{ result_nmcli_cmd_connections_names.stdout_lines }}'

  - name: Enable SSH Server firewalld Firewall Exception - Ensure NetworkManager connections
      are assigned to a firewalld zone
    ansible.builtin.command:
      cmd: nmcli connection modify {{ item.0 }} connection.zone {{ firewalld_sshd_zone
        }}
    register: result_nmcli_cmd_connections_assignment
    with_together:
    - '{{ result_nmcli_cmd_connections_names.stdout_lines }}'
    - '{{ result_nmcli_cmd_connections_zones.results }}'
    when:
    - item.1.stdout == '--'

  - name: Enable SSH Server firewalld Firewall Exception - Ensure NetworkManager connections
      changes are applied
    ansible.builtin.service:
      name: NetworkManager
      state: restarted
    when:
    - result_nmcli_cmd_connections_assignment is changed

  - name: Enable SSH Server firewalld Firewall Exception - Collect firewalld active
      zones
    ansible.builtin.shell:
      cmd: firewall-cmd --get-active-zones | grep -v interfaces
    register: result_firewall_cmd_zones_names
    changed_when: false

  - name: Enable SSH Server firewalld Firewall Exception - Ensure firewalld zones
      allow SSH
    ansible.builtin.command:
      cmd: firewall-cmd --permanent --zone={{ item }} --add-service=ssh
    register: result_nmcli_cmd_connections_assignment
    changed_when:
    - '''ALREADY_ENABLED'' not in result_nmcli_cmd_connections_assignment.stderr'
    with_items:
    - '{{ result_firewall_cmd_zones_names.stdout_lines }}'

  - name: Enable SSH Server firewalld Firewall Exception - Ensure firewalld changes
      are applied
    ansible.builtin.service:
      name: firewalld
      state: reloaded
    when:
    - result_nmcli_cmd_connections_assignment is changed
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_facts.services['firewalld.service'].state == 'running'
  - ansible_facts.services['NetworkManager.service'].state == 'running'
  tags:
  - CCE-89175-4
  - DISA-STIG-RHEL-09-251035
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - firewalld_sshd_port_enabled
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Enable SSH Server firewalld Firewall Exception - Informative message based
    on services states
  ansible.builtin.assert:
    that:
    - ansible_facts.services['firewalld.service'].state == 'running'
    - ansible_facts.services['NetworkManager.service'].state == 'running'
    fail_msg:
    - firewalld and NetworkManager services are not active. Remediation aborted!
    - This remediation could not be applied because it depends on firewalld and NetworkManager
      services running.
    - The service is not started by this remediation in order to prevent connection
      issues.
    success_msg:
    - Enable SSH Server firewalld Firewall Exception remediation successfully executed
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89175-4
  - DISA-STIG-RHEL-09-251035
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - configure_strategy
  - firewalld_sshd_port_enabled
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
OVAL test results details

All NICs must have a firewalld zone defined in their settings  oval:ssg-test_firewalld_sshd_port_enabled_all_nics_in_zones:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-object_firewalld_sshd_port_enabled_network_conf_files_count:obj:1 of type variable_object
Var ref
oval:ssg-var_firewalld_sshd_port_enabled_network_conf_files_with_zone_count:var:1

SSH service is defined in all zones delivered in the firewalld package  oval:ssg-test_firewalld_sshd_port_enabled_zone_ssh_enabled_usr:tst:1  true

Following items have been found on the system:
FilepathPathFilenameXpath
/usr/lib/firewalld/zones/external.xml/usr/lib/firewalld/zonesexternal.xml/zone/service[@name='ssh']
/usr/lib/firewalld/zones/public.xml/usr/lib/firewalld/zonespublic.xml/zone/service[@name='ssh']
/usr/lib/firewalld/zones/dmz.xml/usr/lib/firewalld/zonesdmz.xml/zone/service[@name='ssh']
/usr/lib/firewalld/zones/home.xml/usr/lib/firewalld/zoneshome.xml/zone/service[@name='ssh']
/usr/lib/firewalld/zones/internal.xml/usr/lib/firewalld/zonesinternal.xml/zone/service[@name='ssh']
/usr/lib/firewalld/zones/work.xml/usr/lib/firewalld/zoneswork.xml/zone/service[@name='ssh']

there is no equivalent zone file defined by the administrator in /etc dir  oval:ssg-test_firewalld_sshd_port_enabled_usr_zones_not_overridden:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/firewalld/zones/public.xmlregular00356rw-r--r-- 

SSH service is defined in all zones created or modified by the administrator  oval:ssg-test_firewalld_sshd_port_enabled_zone_ssh_enabled_etc:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-var_firewalld_sshd_port_enabled_custom_zone_files_with_ssh_count:var:11

SSH service is interger in the /usr/lib/firewalld/services dir  oval:ssg-test_firewalld_sshd_port_enabled_ssh_service_usr:tst:1  true

Following items have been found on the system:
FilepathPathFilenameXpath
/usr/lib/firewalld/services/ssh.xml/usr/lib/firewalld/servicesssh.xml/service/port[@port='22']

SSH service is properly configured in /etc/firewalld/services dir  oval:ssg-test_firewalld_sshd_port_enabled_ssh_service_etc:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_firewalld_sshd_port_enabled_ssh_service_file_etc:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/firewalld/services/ssh.xml<port.*port="(\d+)"1
Disable Compression Or Set Compression to delayedxccdf_org.ssgproject.content_rule_sshd_disable_compression mediumCCE-90801-2

Disable Compression Or Set Compression to delayed

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_compression
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_compression:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90801-2

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, SRG-OS-000480-GPOS-00227, RHEL-09-255130, SV-258002r925993_rule

Description
Compression is useful for slow network connections over long distances but can cause performance issues on local LANs. If use of compression is required, it should be enabled only after a user has authenticated; otherwise, it should be disabled. To disable compression or delay compression until after a user has successfully authenticated, add or correct the following line in the /etc/ssh/sshd_config file:
Compression no
Rationale
If compression is allowed in an SSH connection prior to authentication, vulnerabilities in the compression software could result in compromise of the system from an unauthenticated connection, potentially with root privileges.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_disable_compression='no'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^Compression")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$var_sshd_disable_compression"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^Compression\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^Compression\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    cce="CCE-90801-2"
    printf '# Per %s: Set %s in %s\n' "${cce}" "${formatted_output}" "/etc/ssh/sshd_config" >> "/etc/ssh/sshd_config"
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_sshd_disable_compression # promote to variable
  set_fact:
    var_sshd_disable_compression: !!str no
  tags:
    - always

- name: Disable Compression Or Set Compression to delayed
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*Compression\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*Compression\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Compression\s+
      line: Compression {{ var_sshd_disable_compression }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90801-2
  - DISA-STIG-RHEL-09-255130
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_compression
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of Compression setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_compression:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_compression:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)Compression(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1
Disable SSH Access via Empty Passwordsxccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords highCCE-90799-8

Disable SSH Access via Empty Passwords

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_empty_passwords:def:1
Time2024-01-08T16:20:43+00:00
Severityhigh
Identifiers and References

Identifiers:  CCE-90799-8

References:  NT007(R17), 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, 5.5.6, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, 3.1.1, 3.1.5, CCI-000366, CCI-000766, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, FIA_UAU.1, Req-2.2.4, 2.2.6, SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00227, RHEL-09-255040, 5.2.9, SV-257984r925939_rule

Description
Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for PermitEmptyPasswords.
To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
PermitEmptyPasswords no
Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.
Rationale
Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable SSH Access via Empty Passwords
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "PermitEmptyPasswords"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter PermitEmptyPasswords is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "PermitEmptyPasswords"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "PermitEmptyPasswords"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "PermitEmptyPasswords"| regex_escape }}\s+
      line: PermitEmptyPasswords no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90799-8
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255040
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_empty_passwords
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of PermitEmptyPasswords setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_empty_passwords:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_empty_passwords:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)PermitEmptyPasswords(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of PermitEmptyPasswords setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_empty_passwords_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_empty_passwords_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)PermitEmptyPasswords(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of PermitEmptyPasswords is present  oval:ssg-test_PermitEmptyPasswords_present_sshd_disable_empty_passwords:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_disable_empty_passwords:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_disable_empty_passwords:obj:1 oval:ssg-obj_sshd_disable_empty_passwords_config_dir:obj:1
Disable GSSAPI Authenticationxccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth mediumCCE-90808-7

Disable GSSAPI Authentication

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_gssapi_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_gssapi_auth:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90808-7

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000318, CCI-000368, CCI-001812, CCI-001813, CCI-001814, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, 0418, 1055, 1402, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-7(a), CM-7(b), CM-6(a), AC-17(a), PR.IP-1, FTP_ITC_EXT.1, FCS_SSH_EXT.1.2, SRG-OS-000364-GPOS-00151, SRG-OS-000480-GPOS-00227, RHEL-09-255135, SV-258003r925996_rule

Description
Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI.
The default SSH configuration disallows authentications based on GSSAPI. The appropriate configuration is used if no value is set for GSSAPIAuthentication.
To explicitly disable GSSAPI authentication, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
GSSAPIAuthentication no
Rationale
GSSAPI authentication is used to provide additional authentication mechanisms to applications. Allowing GSSAPI authentication through SSH exposes the system's GSSAPI to remote hosts, increasing the attack surface of the system.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*GSSAPIAuthentication\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*GSSAPIAuthentication\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*GSSAPIAuthentication\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "GSSAPIAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "GSSAPIAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable GSSAPI Authentication
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "GSSAPIAuthentication"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter GSSAPIAuthentication is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "GSSAPIAuthentication"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "GSSAPIAuthentication"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "GSSAPIAuthentication"| regex_escape }}\s+
      line: GSSAPIAuthentication no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90808-7
  - DISA-STIG-RHEL-09-255135
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_gssapi_auth
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of GSSAPIAuthentication setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_gssapi_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_gssapi_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)GSSAPIAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of GSSAPIAuthentication setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_gssapi_auth_config_dir:tst:1  false

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confGSSAPIAuthentication yes

Verify that the value of GSSAPIAuthentication is present  oval:ssg-test_GSSAPIAuthentication_present_sshd_disable_gssapi_auth:tst:1  true

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confGSSAPIAuthentication yes
Disable Kerberos Authenticationxccdf_org.ssgproject.content_rule_sshd_disable_kerb_auth mediumCCE-90802-0

Disable Kerberos Authentication

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_kerb_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_kerb_auth:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90802-0

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000318, CCI-000368, CCI-001812, CCI-001813, CCI-001814, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, FTP_ITC_EXT.1, FCS_SSH_EXT.1.2, SRG-OS-000364-GPOS-00151, SRG-OS-000480-GPOS-00227, RHEL-09-255140, SV-258004r925999_rule

Description
Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos.
The default SSH configuration disallows authentication validation through Kerberos. The appropriate configuration is used if no value is set for KerberosAuthentication.
To explicitly disable Kerberos authentication, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
KerberosAuthentication no
Rationale
Kerberos authentication for SSH is often implemented using GSSAPI. If Kerberos is enabled through SSH, the SSH daemon provides a means of access to the system's Kerberos implementation. Configuring these settings for the SSH daemon provides additional assurance that remote logon via SSH will not use unused methods of authentication, even in the event of misconfiguration elsewhere.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*KerberosAuthentication\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*KerberosAuthentication\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*KerberosAuthentication\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "KerberosAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "KerberosAuthentication no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable Kerberos Authentication
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "KerberosAuthentication"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter KerberosAuthentication is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "KerberosAuthentication"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "KerberosAuthentication"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "KerberosAuthentication"| regex_escape }}\s+
      line: KerberosAuthentication no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90802-0
  - DISA-STIG-RHEL-09-255140
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_kerb_auth
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of KerberosAuthentication setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_kerb_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_kerb_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)KerberosAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of KerberosAuthentication setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_kerb_auth_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_kerb_auth_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)KerberosAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of KerberosAuthentication is present  oval:ssg-test_KerberosAuthentication_present_sshd_disable_kerb_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_disable_kerb_auth:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_disable_kerb_auth:obj:1 oval:ssg-obj_sshd_disable_kerb_auth_config_dir:obj:1
Disable SSH Support for .rhosts Filesxccdf_org.ssgproject.content_rule_sshd_disable_rhosts mediumCCE-90797-2

Disable SSH Support for .rhosts Files

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_rhosts
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_rhosts:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90797-2

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-255145, 5.2.11, SV-258005r926002_rule

Description
SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
IgnoreRhosts yes
Rationale
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable SSH Support for .rhosts Files
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "IgnoreRhosts"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter IgnoreRhosts is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "IgnoreRhosts"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "IgnoreRhosts"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "IgnoreRhosts"| regex_escape }}\s+
      line: IgnoreRhosts yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90797-2
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255145
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of IgnoreRhosts setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_rhosts:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_rhosts:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)IgnoreRhosts(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of IgnoreRhosts setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_rhosts_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_rhosts_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)IgnoreRhosts(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of IgnoreRhosts is present  oval:ssg-test_IgnoreRhosts_present_sshd_disable_rhosts:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_disable_rhosts:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_disable_rhosts:obj:1 oval:ssg-obj_sshd_disable_rhosts_config_dir:obj:1
Disable SSH Support for User Known Hostsxccdf_org.ssgproject.content_rule_sshd_disable_user_known_hosts mediumCCE-90796-4

Disable SSH Support for User Known Hosts

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_user_known_hosts
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_user_known_hosts:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90796-4

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, FIA_UAU.1, SRG-OS-000480-GPOS-00227, RHEL-09-255150, SV-258006r926005_rule

Description
SSH can allow system users to connect to systems if a cache of the remote systems public keys is available. This should be disabled.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
IgnoreUserKnownHosts yes
Rationale
Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*IgnoreUserKnownHosts\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*IgnoreUserKnownHosts\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreUserKnownHosts\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "IgnoreUserKnownHosts yes" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    printf '%s\n' "IgnoreUserKnownHosts yes" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable SSH Support for User Known Hosts
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "IgnoreUserKnownHosts"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter IgnoreUserKnownHosts is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "IgnoreUserKnownHosts"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "IgnoreUserKnownHosts"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)^\s*{{ "IgnoreUserKnownHosts"| regex_escape }}\s+
      line: IgnoreUserKnownHosts yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90796-4
  - DISA-STIG-RHEL-09-255150
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_user_known_hosts
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of IgnoreUserKnownHosts setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_user_known_hosts:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_user_known_hosts:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)IgnoreUserKnownHosts(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of IgnoreUserKnownHosts setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_user_known_hosts_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_user_known_hosts_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)IgnoreUserKnownHosts(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of IgnoreUserKnownHosts is present  oval:ssg-test_IgnoreUserKnownHosts_present_sshd_disable_user_known_hosts:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_disable_user_known_hosts:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_disable_user_known_hosts:obj:1 oval:ssg-obj_sshd_disable_user_known_hosts_config_dir:obj:1
Disable X11 Forwardingxccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding mediumCCE-90798-0

Disable X11 Forwarding

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_disable_x11_forwarding:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90798-0

References:  CCI-000366, CM-6(b), 2.2.4, SRG-OS-000480-GPOS-00227, RHEL-09-255155, 5.2.12, SV-258007r926008_rule

Description
The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the capability to encrypt remote X11 connections when SSH's X11Forwarding option is enabled.
The default SSH configuration disables X11Forwarding. The appropriate configuration is used if no value is set for X11Forwarding.
To explicitly disable X11 Forwarding, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
X11Forwarding no
Rationale
Disable X11 forwarding unless there is an operational requirement to use X11 applications directly. There is a small risk that the remote X11 servers of users who are logged in via SSH with X11 forwarding could be compromised by other users on the X11 server. Note that even if X11 forwarding is disabled, users can always install their own forwarders.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "X11Forwarding no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "X11Forwarding no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Disable X11 Forwarding
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter X11Forwarding is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "X11Forwarding"| regex_escape }}\s+
      line: X11Forwarding no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90798-0
  - DISA-STIG-RHEL-09-255155
  - NIST-800-53-CM-6(b)
  - PCI-DSSv4-2.2.4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_x11_forwarding
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of X11Forwarding setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_disable_x11_forwarding:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_disable_x11_forwarding:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)X11Forwarding(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of X11Forwarding setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_disable_x11_forwarding_config_dir:tst:1  false

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confX11Forwarding yes

Verify that the value of X11Forwarding is present  oval:ssg-test_X11Forwarding_present_sshd_disable_x11_forwarding:tst:1  true

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confX11Forwarding yes
Do Not Allow SSH Environment Optionsxccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env mediumCCE-90803-8

Do Not Allow SSH Environment Options

Rule IDxccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_do_not_permit_user_env:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90803-8

References:  11, 3, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00229, RHEL-09-255085, 5.2.10, SV-257993r925966_rule

Description
Ensure that users are not able to override environment variables of the SSH daemon.
The default SSH configuration disables environment processing. The appropriate configuration is used if no value is set for PermitUserEnvironment.
To explicitly disable Environment options, add or correct the following /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
PermitUserEnvironment no
Rationale
SSH environment options potentially allow users to bypass access restriction in some configurations.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Do Not Allow SSH Environment Options
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "PermitUserEnvironment"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter PermitUserEnvironment is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "PermitUserEnvironment"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "PermitUserEnvironment"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "PermitUserEnvironment"| regex_escape }}\s+
      line: PermitUserEnvironment no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90803-8
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255085
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_do_not_permit_user_env
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of PermitUserEnvironment setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_do_not_permit_user_env:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_do_not_permit_user_env:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)PermitUserEnvironment(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of PermitUserEnvironment setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_do_not_permit_user_env_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_do_not_permit_user_env_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)PermitUserEnvironment(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of PermitUserEnvironment is present  oval:ssg-test_PermitUserEnvironment_present_sshd_do_not_permit_user_env:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_do_not_permit_user_env:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_do_not_permit_user_env:obj:1 oval:ssg-obj_sshd_do_not_permit_user_env_config_dir:obj:1
Enable PAMxccdf_org.ssgproject.content_rule_sshd_enable_pam mediumCCE-86722-6

Enable PAM

Rule IDxccdf_org.ssgproject.content_rule_sshd_enable_pam
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_enable_pam:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86722-6

References:  CCI-000877, 2.2.4, SRG-OS-000125-GPOS-00065, RHEL-09-255050, 5.2.6, SV-257986r925945_rule

Description
UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM account and session module processing for all authentication types. To enable PAM authentication, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
UsePAM yes
Rationale
When UsePAM is set to yes, PAM runs through account and session types properly. This is important if you want to restrict access to services based off of IP, time or other factors of the account. Additionally, you can make sure users inherit certain environment variables on login or disallow access to the server.
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of UsePAM setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_enable_pam:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_pam:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)UsePAM(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of UsePAM setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_enable_pam_config_dir:tst:1  true

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confUsePAM yes

Verify that the value of UsePAM is present  oval:ssg-test_UsePAM_present_sshd_enable_pam:tst:1  true

Following items have been found on the system:
PathContent
/etc/ssh/sshd_config.d/50-redhat.confUsePAM yes
Enable Public Key Authenticationxccdf_org.ssgproject.content_rule_sshd_enable_pubkey_auth mediumCCE-86138-5

Enable Public Key Authentication

Rule IDxccdf_org.ssgproject.content_rule_sshd_enable_pubkey_auth
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_enable_pubkey_auth:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86138-5

References:  CCI-000765, CCI-000766, CCI-000767, CCI-000768, SRG-OS-000105-GPOS-00052, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, RHEL-09-255035, SV-257983r925936_rule

Description
Enable SSH login with public keys.
The default SSH configuration enables authentication based on public keys. The appropriate configuration is used if no value is set for PubkeyAuthentication.
To explicitly enable Public Key Authentication, add or correct the following /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
PubkeyAuthentication yes
Rationale
Without the use of multifactor authentication, the ease of access to privileged functions is greatly increased. Multifactor authentication requires using two or more factors to achieve authentication. A privileged account is defined as an information system account with authorizations of a privileged user. The DoD CAC with DoD-approved PKI is an example of multifactor authentication.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*PubkeyAuthentication\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PubkeyAuthentication\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PubkeyAuthentication\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PubkeyAuthentication yes" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    printf '%s\n' "PubkeyAuthentication yes" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Enable Public Key Authentication
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "PubkeyAuthentication"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter PubkeyAuthentication is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "PubkeyAuthentication"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "PubkeyAuthentication"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)^\s*{{ "PubkeyAuthentication"| regex_escape }}\s+
      line: PubkeyAuthentication yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86138-5
  - DISA-STIG-RHEL-09-255035
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_pubkey_auth
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of PubkeyAuthentication setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_enable_pubkey_auth:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_pubkey_auth:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)PubkeyAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of PubkeyAuthentication setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_enable_pubkey_auth_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_pubkey_auth_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)PubkeyAuthentication(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of PubkeyAuthentication is present  oval:ssg-test_PubkeyAuthentication_present_sshd_enable_pubkey_auth:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_enable_pubkey_auth:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_enable_pubkey_auth:obj:1 oval:ssg-obj_sshd_enable_pubkey_auth_config_dir:obj:1
Enable Use of Strict Mode Checkingxccdf_org.ssgproject.content_rule_sshd_enable_strictmodes mediumCCE-90809-5

Enable Use of Strict Mode Checking

Rule IDxccdf_org.ssgproject.content_rule_sshd_enable_strictmodes
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_enable_strictmodes:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90809-5

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6, AC-17(a), CM-6(a), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-255160, SV-258008r926011_rule

Description
SSHs StrictModes option checks file and ownership permissions in the user's home directory .ssh folder before accepting login. If world- writable permissions are found, logon is rejected.
The default SSH configuration has StrictModes enabled. The appropriate configuration is used if no value is set for StrictModes.
To explicitly enable StrictModes in SSH, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
StrictModes yes
Rationale
If other users have access to modify user-specific SSH configuration files, they may be able to log into the system as another user.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*StrictModes\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*StrictModes\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*StrictModes\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "StrictModes yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "StrictModes yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Enable Use of Strict Mode Checking
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "StrictModes"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter StrictModes is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "StrictModes"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "StrictModes"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "StrictModes"| regex_escape }}\s+
      line: StrictModes yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90809-5
  - DISA-STIG-RHEL-09-255160
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_strictmodes
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of StrictModes setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_enable_strictmodes:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_strictmodes:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)StrictModes(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of StrictModes setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_enable_strictmodes_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_strictmodes_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)StrictModes(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of StrictModes is present  oval:ssg-test_StrictModes_present_sshd_enable_strictmodes:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_enable_strictmodes:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_enable_strictmodes:obj:1 oval:ssg-obj_sshd_enable_strictmodes_config_dir:obj:1
Enable SSH Warning Bannerxccdf_org.ssgproject.content_rule_sshd_enable_warning_banner mediumCCE-90807-9

Enable SSH Warning Banner

Rule IDxccdf_org.ssgproject.content_rule_sshd_enable_warning_banner
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_enable_warning_banner:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90807-9

References:  1, 12, 15, 16, 5.5.6, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(c), AC-17(a), CM-6(a), PR.AC-7, FTA_TAB.1, Req-2.2.4, 2.2.6, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, RHEL-09-255025, SV-257981r925930_rule

Description
To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
Banner /etc/issue
Another section contains information on how to create an appropriate system-wide warning banner.
Rationale
The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "Banner /etc/issue" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    printf '%s\n' "Banner /etc/issue" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Enable SSH Warning Banner
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "Banner"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter Banner is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "Banner"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "Banner"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)^\s*{{ "Banner"| regex_escape }}\s+
      line: Banner /etc/issue
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90807-9
  - CJIS-5.5.6
  - DISA-STIG-RHEL-09-255025
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_warning_banner
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of Banner setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_enable_warning_banner:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_warning_banner:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)Banner(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of Banner setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_enable_warning_banner_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_enable_warning_banner_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)Banner(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of Banner is present  oval:ssg-test_Banner_present_sshd_enable_warning_banner:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_enable_warning_banner:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_enable_warning_banner:obj:1 oval:ssg-obj_sshd_enable_warning_banner_config_dir:obj:1
Enable SSH Print Last Logxccdf_org.ssgproject.content_rule_sshd_print_last_log mediumCCE-90804-6

Enable SSH Print Last Log

Rule IDxccdf_org.ssgproject.content_rule_sshd_print_last_log
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_print_last_log:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90804-6

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-000052, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-9, AC-9(1), PR.AC-7, SRG-OS-000480-GPOS-00227, RHEL-09-255165, SV-258009r926014_rule

Description
Ensure that SSH will display the date and time of the last successful account logon.
The default SSH configuration enables print of the date and time of the last login. The appropriate configuration is used if no value is set for PrintLastLog.
To explicitly enable LastLog in SSH, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
PrintLastLog yes
Rationale
Providing users feedback on when account accesses last occurred facilitates user recognition and reporting of unauthorized account use.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*PrintLastLog\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*PrintLastLog\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*PrintLastLog\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PrintLastLog yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "PrintLastLog yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Enable SSH Print Last Log
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "PrintLastLog"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter PrintLastLog is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "PrintLastLog"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "PrintLastLog"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "PrintLastLog"| regex_escape }}\s+
      line: PrintLastLog yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90804-6
  - DISA-STIG-RHEL-09-255165
  - NIST-800-53-AC-9
  - NIST-800-53-AC-9(1)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_print_last_log
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of PrintLastLog setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_print_last_log:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_print_last_log:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)PrintLastLog(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of PrintLastLog setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_print_last_log_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_print_last_log_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)PrintLastLog(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of PrintLastLog is present  oval:ssg-test_PrintLastLog_present_sshd_print_last_log:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_print_last_log:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_print_last_log:obj:1 oval:ssg-obj_sshd_print_last_log_config_dir:obj:1
Force frequent session key renegotiationxccdf_org.ssgproject.content_rule_sshd_rekey_limit mediumCCE-90815-2

Force frequent session key renegotiation

Rule IDxccdf_org.ssgproject.content_rule_sshd_rekey_limit
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_rekey_limit:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90815-2

References:  CCI-000068, FCS_SSH_EXT.1.8, SRG-OS-000480-GPOS-00227, SRG-OS-000033-GPOS-00014, RHEL-09-255090, SV-257994r925969_rule

Description
The RekeyLimit parameter specifies how often the session key of the is renegotiated, both in terms of amount of data that may be transmitted and the time elapsed.
To decrease the default limits, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
RekeyLimit 1G 1h
Rationale
By decreasing the limit based on the amount of data and enabling time-based limit, effects of potential attacks against encryption keys are limited.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_rekey_limit_size='1G'
var_rekey_limit_time='1h'



mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*RekeyLimit\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*RekeyLimit\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*RekeyLimit\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "RekeyLimit $var_rekey_limit_size $var_rekey_limit_time" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    printf '%s\n' "RekeyLimit $var_rekey_limit_size $var_rekey_limit_time" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: XCCDF Value var_rekey_limit_size # promote to variable
  set_fact:
    var_rekey_limit_size: !!str 1G
  tags:
    - always
- name: XCCDF Value var_rekey_limit_time # promote to variable
  set_fact:
    var_rekey_limit_time: !!str 1h
  tags:
    - always

- name: Force frequent session key renegotiation
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "RekeyLimit"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter RekeyLimit is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "RekeyLimit"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "RekeyLimit"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)^\s*{{ "RekeyLimit"| regex_escape }}\s+
      line: RekeyLimit {{ var_rekey_limit_size }} {{ var_rekey_limit_time }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90815-2
  - DISA-STIG-RHEL-09-255090
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - sshd_rekey_limit
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of RekeyLimit setting in the file  oval:ssg-test_sshd_rekey_limit:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_rekey_limit:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[\s]*RekeyLimit[\s]+(.*)$1

tests the value of RekeyLimit setting in SSHD config directory  oval:ssg-test_sshd_rekey_limit_config_dir:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_rekey_limit_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[\s]*RekeyLimit[\s]+(.*)$1
Set SSH Daemon LogLevel to VERBOSExccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose mediumCCE-86923-0

Set SSH Daemon LogLevel to VERBOSE

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_loglevel_verbose
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_set_loglevel_verbose:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86923-0

References:  CCI-000067, CIP-007-3 R7.1, AC-17(a), AC-17(1), CM-6(a), Req-2.2.4, 2.2.6, SRG-OS-000032-GPOS-00013, RHEL-09-255030, 5.2.5, SV-257982r925933_rule

Description
The VERBOSE parameter configures the SSH daemon to record login and logout activity. To specify the log level in SSH, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf:
LogLevel VERBOSE
Rationale
SSH provides several logging levels with varying amounts of verbosity. DEBUG is specifically not recommended other than strictly for debugging SSH communications since it provides so much data that it is difficult to identify important security information. INFO or VERBOSE level is the basic level that only records login activity of SSH users. In many situations, such as Incident Response, it is important to determine when a particular user was active on a system. The logout record can eliminate those users who disconnected, which helps narrow the field.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "LogLevel VERBOSE" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    printf '%s\n' "LogLevel VERBOSE" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Set SSH Daemon LogLevel to VERBOSE
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "LogLevel"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter LogLevel is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "LogLevel"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "LogLevel"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)^\s*{{ "LogLevel"| regex_escape }}\s+
      line: LogLevel VERBOSE
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-86923-0
  - DISA-STIG-RHEL-09-255030
  - NIST-800-53-AC-17(1)
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_loglevel_verbose
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of LogLevel setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_set_loglevel_verbose:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_set_loglevel_verbose:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)LogLevel(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of LogLevel setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_set_loglevel_verbose_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_set_loglevel_verbose_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)LogLevel(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of LogLevel is present  oval:ssg-test_LogLevel_present_sshd_set_loglevel_verbose:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_set_loglevel_verbose:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_set_loglevel_verbose:obj:1 oval:ssg-obj_sshd_set_loglevel_verbose_config_dir:obj:1
Enable Use of Privilege Separationxccdf_org.ssgproject.content_rule_sshd_use_priv_separation mediumCCE-88822-2

Enable Use of Privilege Separation

Rule IDxccdf_org.ssgproject.content_rule_sshd_use_priv_separation
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_use_priv_separation:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88822-2

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-17(a), AC-6, PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-255170, SV-258010r926017_rule

Description
When enabled, SSH will create an unprivileged child process that has the privilege of the authenticated user. To enable privilege separation in SSH, add or correct the following line in the /etc/ssh/sshd_config file:
UsePrivilegeSeparation sandbox
Rationale
SSH daemon privilege separation causes the SSH process to drop root privileges when not needed which would decrease the impact of software vulnerabilities in the unprivileged section.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_priv_separation='sandbox'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*UsePrivilegeSeparation\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "UsePrivilegeSeparation $var_sshd_priv_separation" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "UsePrivilegeSeparation $var_sshd_priv_separation" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: XCCDF Value var_sshd_priv_separation # promote to variable
  set_fact:
    var_sshd_priv_separation: !!str sandbox
  tags:
    - always

- name: Enable Use of Privilege Separation
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*UsePrivilegeSeparation\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*UsePrivilegeSeparation\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*UsePrivilegeSeparation\s+
      line: UsePrivilegeSeparation {{ var_sshd_priv_separation }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-88822-2
  - DISA-STIG-RHEL-09-255170
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_priv_separation
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of UsePrivilegeSeparation setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_use_priv_separation:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_use_priv_separation:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)UsePrivilegeSeparation(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1
Prevent remote hosts from connecting to the proxy displayxccdf_org.ssgproject.content_rule_sshd_x11_use_localhost mediumCCE-89105-1

Prevent remote hosts from connecting to the proxy display

Rule IDxccdf_org.ssgproject.content_rule_sshd_x11_use_localhost
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-sshd_x11_use_localhost:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89105-1

References:  CCI-000366, CM-6(b), SRG-OS-000480-GPOS-00227, RHEL-09-255175, SV-258011r926020_rule

Description
The SSH daemon should prevent remote hosts from connecting to the proxy display.
The default SSH configuration for X11UseLocalhost is yes, which prevents remote hosts from connecting to the proxy display.
To explicitly prevent remote connections to the proxy display, add or correct the following line in /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf: X11UseLocalhost yes
Rationale
When X11 forwarding is enabled, there may be additional exposure to the server and client displays if the sshd proxy display is configured to listen on the wildcard address. By default, sshd binds the forwarding server to the loopback address and sets the hostname part of the DISPLAY environment variable to localhost. This prevents remote hosts from connecting to the proxy display.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf

LC_ALL=C sed -i "/^\s*X11UseLocalhost\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*X11UseLocalhost\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*X11UseLocalhost\s\+/Id" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    touch "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"

cp "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "X11UseLocalhost yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" > "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    printf '%s\n' "X11UseLocalhost yes" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak" >> "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
- name: Prevent remote hosts from connecting to the proxy display
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*{{ "X11UseLocalhost"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter X11UseLocalhost is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "X11UseLocalhost"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)^\s*{{ "X11UseLocalhost"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/01-complianceascode-reinforce-os-defaults.conf
      create: true
      regexp: (?i)^\s*{{ "X11UseLocalhost"| regex_escape }}\s+
      line: X11UseLocalhost yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-89105-1
  - DISA-STIG-RHEL-09-255175
  - NIST-800-53-CM-6(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_x11_use_localhost
OVAL test results details

Verify if Profile set Value sshd_required as not required  oval:ssg-test_sshd_not_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is removed  oval:ssg-test_package_openssh-server_removed:tst:1  false

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Verify if Profile set Value sshd_required as required  oval:ssg-test_sshd_required:tst:1  false

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

Verify if Value of sshd_required is the default  oval:ssg-test_sshd_requirement_unset:tst:1  true

Following items have been found on the system:
Var refValue
oval:ssg-sshd_required:var:10

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

tests the value of X11UseLocalhost setting in the /etc/ssh/sshd_config file  oval:ssg-test_sshd_x11_use_localhost:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_x11_use_localhost:obj:1 of type textfilecontent54_object
FilepathPatternInstance
/etc/ssh/sshd_config^[ \t]*(?i)X11UseLocalhost(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

tests the value of X11UseLocalhost setting in the /etc/ssh/sshd_config.d file  oval:ssg-test_sshd_x11_use_localhost_config_dir:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_sshd_x11_use_localhost_config_dir:obj:1 of type textfilecontent54_object
PathFilenamePatternInstance
/etc/ssh/sshd_config.d.*\.conf$^[ \t]*(?i)X11UseLocalhost(?-i)[ \t]+(.+?)[ \t]*(?:$|#)1

Verify that the value of X11UseLocalhost is present  oval:ssg-test_X11UseLocalhost_present_sshd_x11_use_localhost:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_collection_obj_sshd_x11_use_localhost:obj:1 of type textfilecontent54_object
Set
oval:ssg-obj_sshd_x11_use_localhost:obj:1 oval:ssg-obj_sshd_x11_use_localhost_config_dir:obj:1
Install OpenSSH client softwarexccdf_org.ssgproject.content_rule_package_openssh-clients_installed mediumCCE-90836-8

Install OpenSSH client software

Rule IDxccdf_org.ssgproject.content_rule_package_openssh-clients_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_openssh-clients_installed:def:1
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90836-8

References:  FIA_UAU.5, FTP_ITC_EXT.1, FCS_SSH_EXT.1, FCS_SSHC_EXT.1, SRG-OS-000480-GPOS-00227, RHEL-09-255020, SV-257980r928960_rule

Description
The openssh-clients package can be installed with the following command:
$ sudo dnf install openssh-clients
Rationale
This package includes utilities to make encrypted connections and transfer files securely to SSH servers.
OVAL test results details

package openssh-clients is installed  oval:ssg-test_package_openssh-clients_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-clientsx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-clients-0:8.7p1-34.el9.x86_64
Install the OpenSSH Server Packagexccdf_org.ssgproject.content_rule_package_openssh-server_installed mediumCCE-90823-6

Install the OpenSSH Server Package

Rule IDxccdf_org.ssgproject.content_rule_package_openssh-server_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_openssh-server_installed:def:1
Time2024-01-08T16:20:42+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90823-6

References:  13, 14, APO01.06, DSS05.02, DSS05.04, DSS05.07, DSS06.02, DSS06.06, CCI-002418, CCI-002420, CCI-002421, CCI-002422, SR 3.1, SR 3.8, SR 4.1, SR 4.2, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), PR.DS-2, PR.DS-5, FIA_UAU.5, FTP_ITC_EXT.1, FCS_SSH_EXT.1, FCS_SSHS_EXT.1, SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188, SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00190, RHEL-09-255010, SV-257978r925921_rule

Description
The openssh-server package should be installed. The openssh-server package can be installed with the following command:
$ sudo dnf install openssh-server
Rationale
Without protection of the transmitted information, confidentiality, and integrity may be compromised because unprotected communications can be intercepted and either read or altered.
OVAL test results details

package openssh-server is installed  oval:ssg-test_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64
Enable the OpenSSH Servicexccdf_org.ssgproject.content_rule_service_sshd_enabled mediumCCE-90822-8

Enable the OpenSSH Service

Rule IDxccdf_org.ssgproject.content_rule_service_sshd_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_sshd_enabled:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90822-8

References:  13, 14, APO01.06, DSS05.02, DSS05.04, DSS05.07, DSS06.02, DSS06.06, 3.1.13, 3.5.4, 3.13.8, CCI-002418, CCI-002420, CCI-002421, CCI-002422, SR 3.1, SR 3.8, SR 4.1, SR 4.2, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), SC-8, SC-8(1), SC-8(2), SC-8(3), SC-8(4), PR.DS-2, PR.DS-5, SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188, SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00190, RHEL-09-255015, SV-257979r925924_rule

Description
The SSH server service, sshd, is commonly needed. The sshd service can be enabled with the following command:
$ sudo systemctl enable sshd.service
Rationale
Without protection of the transmitted information, confidentiality, and integrity may be compromised because unprotected communications can be intercepted and either read or altered.

This checklist item applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, etc). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification.
OVAL test results details

package openssh-server is installed  oval:ssg-test_service_sshd_package_openssh-server_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
openssh-serverx86_64(none)34.el98.7p10:8.7p1-34.el9199e2f91fd431d51openssh-server-0:8.7p1-34.el9.x86_64

Test that the sshd service is running  oval:ssg-test_service_running_sshd:tst:1  true

Following items have been found on the system:
UnitPropertyValue
sshd.socketActiveStateinactive
sshd.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_sshd:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_sshd_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Verify Group Who Owns SSH Server config filexccdf_org.ssgproject.content_rule_file_groupowner_sshd_config mediumCCE-90817-8

Verify Group Who Owns SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_sshd_config
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_groupowner_sshd_config:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90817-8

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-255105, 5.2.1, SV-257997r925978_rule

Description
To properly set the group owner of /etc/ssh/sshd_config, run the command:
$ sudo chgrp root /etc/ssh/sshd_config
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing group ownership of /etc/ssh/sshd_config  oval:ssg-test_file_groupowner_sshd_config_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_groupowner_sshd_config_0:obj:1 of type file_object
FilepathFilterFilter
/etc/ssh/sshd_configoval:ssg-symlink_file_groupowner_sshd_config_uid_0:ste:1oval:ssg-state_file_groupowner_sshd_config_gid_0_0:ste:1
Verify Owner on SSH Server config filexccdf_org.ssgproject.content_rule_file_owner_sshd_config mediumCCE-90821-0

Verify Owner on SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_owner_sshd_config
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_owner_sshd_config:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90821-0

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, RHEL-09-255110, 5.2.1, SV-257998r925981_rule

Description
To properly set the owner of /etc/ssh/sshd_config, run the command:
$ sudo chown root /etc/ssh/sshd_config 
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing user ownership of /etc/ssh/sshd_config  oval:ssg-test_file_owner_sshd_config_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_owner_sshd_config_0:obj:1 of type file_object
FilepathFilterFilter
/etc/ssh/sshd_configoval:ssg-symlink_file_owner_sshd_config_uid_0:ste:1oval:ssg-state_file_owner_sshd_config_uid_0_0:ste:1
Verify Permissions on SSH Server config filexccdf_org.ssgproject.content_rule_file_permissions_sshd_config mediumCCE-90818-6

Verify Permissions on SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_config
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_sshd_config:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90818-6

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-255115, 5.2.1, SV-257999r925984_rule

Description
To properly set the permissions of /etc/ssh/sshd_config, run the command:
$ sudo chmod 0600 /etc/ssh/sshd_config
Rationale
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
OVAL test results details

Testing mode of /etc/ssh/sshd_config  oval:ssg-test_file_permissions_sshd_config_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_sshd_config_0:obj:1 of type file_object
FilepathFilterFilter
/etc/ssh/sshd_configoval:ssg-exclude_symlinks__sshd_config:ste:1oval:ssg-state_file_permissions_sshd_config_0_mode_0600or_stricter_:ste:1
Verify Permissions on SSH Server Private *_key Key Filesxccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key mediumCCE-90820-2

Verify Permissions on SSH Server Private *_key Key Files

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_sshd_private_key:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90820-2

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-255120, 5.2.2, SV-258000r925987_rule

Description
SSH server private keys - files that match the /etc/ssh/*_key glob, have to have restricted permissions. If those files are owned by the root user and the root group, they have to have the 0600 permission or stricter. If they are owned by the root user, but by a dedicated group ssh_keys, they can have the 0640 permission or stricter.
Rationale
If an unauthorized user obtains the private SSH host key file, the host could be impersonated.

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

for keyfile in /etc/ssh/*_key; do
    test -f "$keyfile" || continue
    if test root:root = "$(stat -c "%U:%G" "$keyfile")"; then
    
	chmod u-xs,g-xwrs,o-xwrt "$keyfile"
    
    elif test root:ssh_keys = "$(stat -c "%U:%G" "$keyfile")"; then
	chmod u-xs,g-xws,o-xwrt "$keyfile"
    else
        echo "Key-like file '$keyfile' is owned by an unexpected user:group combination"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Find root:root-owned keys
  ansible.builtin.command: find -H /etc/ssh/ -maxdepth 1 -user root -regex ".*_key$"
    -type f -group root -perm /u+xs,g+xwrs,o+xwrt
  register: root_owned_keys
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90820-2
  - DISA-STIG-RHEL-09-255120
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for root:root-owned keys
  ansible.builtin.file:
    path: '{{ item }}'
    mode: u-xs,g-xwrs,o-xwrt
    state: file
  with_items:
  - '{{ root_owned_keys.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90820-2
  - DISA-STIG-RHEL-09-255120
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Find root:ssh_keys-owned keys
  ansible.builtin.command: find -H /etc/ssh/ -maxdepth 1 -user root -regex ".*_key$"
    -type f -group ssh_keys -perm /u+xs,g+xws,o+xwrt
  register: dedicated_group_owned_keys
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90820-2
  - DISA-STIG-RHEL-09-255120
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for root:ssh_keys-owned keys
  ansible.builtin.file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwrt
    state: file
  with_items:
  - '{{ dedicated_group_owned_keys.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-90820-2
  - DISA-STIG-RHEL-09-255120
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

include ssh_private_key_perms

class ssh_private_key_perms {
  exec { 'sshd_priv_key':
    command => "chmod 0640 /etc/ssh/*_key",
    path    => '/bin:/usr/bin'
  }
}
OVAL test results details

No keys that have unsafe ownership/permissions combination exist  oval:ssg-test_no_offending_keys:tst:1  false

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/ssh/ssh_host_rsa_keyregular09942578rw-r----- 
/etc/ssh/ssh_host_ecdsa_keyregular0994480rw-r----- 
Verify Permissions on SSH Server Public *.pub Key Filesxccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key mediumCCE-90819-4

Verify Permissions on SSH Server Public *.pub Key Files

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-file_permissions_sshd_pub_key:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-90819-4

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00227, RHEL-09-255125, 5.2.3, SV-258001r925990_rule

Description
To properly set the permissions of /etc/ssh/*.pub, run the command:
$ sudo chmod 0644 /etc/ssh/*.pub
Rationale
If a public host key file is modified by an unauthorized user, the SSH service may be compromised.
OVAL test results details

Testing mode of /etc/ssh/  oval:ssg-test_file_permissions_sshd_pub_key_0:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-object_file_permissions_sshd_pub_key_0:obj:1 of type file_object
PathFilenameFilterFilter
/etc/ssh^.*\.pub$oval:ssg-exclude_symlinks__sshd_pub_key:ste:1oval:ssg-state_file_permissions_sshd_pub_key_0_mode_0644or_stricter_:ste:1
Certificate status checking in SSSDxccdf_org.ssgproject.content_rule_sssd_certificate_verification mediumCCE-87088-1

Certificate status checking in SSSD

Rule IDxccdf_org.ssgproject.content_rule_sssd_certificate_verification
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87088-1

References:  CCI-001948, CCI-001954, IA-2(11), SRG-OS-000375-GPOS-00160, SRG-OS-000377-GPOS-00162, RHEL-09-611170, SV-258123r926356_rule

Description
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards. Configuring certificate_verification to ocsp_dgst=sha512 ensures that certificates for multifactor solutions are checked via Online Certificate Status Protocol (OCSP).
Rationale
Ensuring that multifactor solutions certificates are checked via Online Certificate Status Protocol (OCSP) ensures the security of the system.
Enable Certmap in SSSDxccdf_org.ssgproject.content_rule_sssd_enable_certmap mediumCCE-89737-1

Enable Certmap in SSSD

Rule IDxccdf_org.ssgproject.content_rule_sssd_enable_certmap
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89737-1

References:  CCI-000187, IA-5 (2) (c), SRG-OS-000068-GPOS-00036, RHEL-09-631015, SV-258132r926383_rule

Description
SSSD should be configured to verify the certificate of the user or group. To set this up ensure that section like certmap/testing.test/rule_name is setup in /etc/sssd/sssd.conf. For example
[certmap/testing.test/rule_name]
matchrule =<SAN>.*EDIPI@mil
maprule = (userCertificate;binary={cert!bin})
domains = testing.test
Rationale
Without mapping the certificate used to authenticate to the user account, the ability to determine the identity of the individual user or group will not be available for forensic analysis.
Warnings
warning  Automatic remediation of this control is not available, since all of the settings in in the certmap need to be customized.
Enable Smartcards in SSSDxccdf_org.ssgproject.content_rule_sssd_enable_smartcards mediumCCE-89155-6

Enable Smartcards in SSSD

Rule IDxccdf_org.ssgproject.content_rule_sssd_enable_smartcards
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-89155-6

References:  CCI-001954, CCI-000765, CCI-000766, CCI-000767, CCI-000768, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, Req-8.3, 8.4, SRG-OS-000375-GPOS-00160, SRG-OS-000105-GPOS-00052, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, RHEL-09-611165, SV-258122r926353_rule

Description
SSSD should be configured to authenticate access to the system using smart cards. To enable smart cards in SSSD, set pam_cert_auth to True under the [pam] section in /etc/sssd/sssd.conf. For example:
[pam]
pam_cert_auth = True
Add or update "pam_sss.so" line in auth section of "/etc/pam.d/system-auth" file to include "try_cert_auth" or "require_cert_auth" option, like in the following example:
/etc/pam.d/system-auth:auth [success=done authinfo_unavail=ignore ignore=ignore default=die] pam_sss.so try_cert_auth
Also add or update "pam_sss.so" line in auth section of "/etc/pam.d/smartcard-auth" file to include the "allow_missing_name" option, like in the following example:
/etc/pam.d/smartcard-auth:auth sufficient pam_sss.so allow_missing_name
Rationale
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.

Multi-Factor Authentication (MFA) solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DoD Common Access Card.
SSSD Has a Correct Trust Anchorxccdf_org.ssgproject.content_rule_sssd_has_trust_anchor mediumCCE-86321-7

SSSD Has a Correct Trust Anchor

Rule IDxccdf_org.ssgproject.content_rule_sssd_has_trust_anchor
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-86321-7

References:  CCI-000185, IA-5 (2) (a), SRG-OS-000066-GPOS-00034, SRG-OS-000384-GPOS-00167, RHEL-09-631010, SV-258131r926380_rule

Description
SSSD must have acceptable trust anchor present.
Rationale
Without path validation, an informed trust decision by the relying party cannot be made when presented with any certificate not already explicitly trusted. A trust anchor is an authoritative entity represented via a public key and associated data. It is used in the context of public key infrastructures, X.509 digital certificates, and DNSSEC. When there is a chain of trust, usually the top entity to be trusted becomes the trust anchor; it can be, for example, a Certification Authority (CA). A certification path starts with the subject certificate and proceeds through a number of intermediate certificates up to a trusted root certificate, typically issued by a trusted CA. This requirement verifies that a certification path to an accepted trust anchor is used for certificate validation and that the path includes status information. Path validation is necessary for a relying party to make an informed trust decision when presented with any certificate not already explicitly trusted. Status information for certification paths includes certificate revocation lists or online certificate status protocol responses. Validation of the certificate status information is out of scope for this requirement.
Warnings
warning  Automatic remediation of this control is not available.
Configure SSSD to Expire Offline Credentialsxccdf_org.ssgproject.content_rule_sssd_offline_cred_expiration mediumCCE-87996-5

Configure SSSD to Expire Offline Credentials

Rule IDxccdf_org.ssgproject.content_rule_sssd_offline_cred_expiration
Result
notapplicable
Multi-check ruleno
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-87996-5

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-002007, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), IA-5(13), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000383-GPOS-00166, RHEL-09-631020, SV-258133r926386_rule

Description
SSSD should be configured to expire offline credentials after 1 day. To configure SSSD to expire offline credentials, set offline_credentials_expiration to 1 under the [pam] section in /etc/sssd/sssd.conf. For example:
[pam]
offline_credentials_expiration = 1
Rationale
If cached authentication information is out-of-date, the validity of the authentication information may be questionable.
Install usbguard Packagexccdf_org.ssgproject.content_rule_package_usbguard_installed mediumCCE-84203-9

Install usbguard Package

Rule IDxccdf_org.ssgproject.content_rule_package_usbguard_installed
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-package_usbguard_installed:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84203-9

References:  A.23.SEC-RHEL1, CCI-001958, 1418, CM-8(3), IA-3, SRG-OS-000378-GPOS-00163, RHEL-09-291015, SV-258035r926092_rule

Description
The usbguard package can be installed with the following command:
$ sudo dnf install usbguard
Rationale
usbguard is a software framework that helps to protect against rogue USB devices by implementing basic whitelisting/blacklisting capabilities based on USB device attributes.
OVAL test results details

package usbguard is installed  oval:ssg-test_package_usbguard_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
usbguardx86_64(none)15.el91.0.00:1.0.0-15.el9199e2f91fd431d51usbguard-0:1.0.0-15.el9.x86_64
Enable the USBGuard Servicexccdf_org.ssgproject.content_rule_service_usbguard_enabled mediumCCE-84205-4

Enable the USBGuard Service

Rule IDxccdf_org.ssgproject.content_rule_service_usbguard_enabled
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-service_usbguard_enabled:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84205-4

References:  A.23.SEC-RHEL1, CCI-000416, CCI-001958, 1418, CM-8(3)(a), IA-3, FMT_SMF_EXT.1, SRG-OS-000378-GPOS-00163, RHEL-09-291020, SV-258036r926095_rule

Description
The USBGuard service should be enabled. The usbguard service can be enabled with the following command:
$ sudo systemctl enable usbguard.service
Rationale
The usbguard service must be running in order to enforce the USB device authorization policy for all USB devices.
OVAL test results details

package usbguard is installed  oval:ssg-test_service_usbguard_package_usbguard_installed:tst:1  true

Following items have been found on the system:
NameArchEpochReleaseVersionEvrSignature keyidExtended name
usbguardx86_64(none)15.el91.0.00:1.0.0-15.el9199e2f91fd431d51usbguard-0:1.0.0-15.el9.x86_64

Test that the usbguard service is running  oval:ssg-test_service_running_usbguard:tst:1  true

Following items have been found on the system:
UnitPropertyValue
usbguard.serviceActiveStateactive

systemd test  oval:ssg-test_multi_user_wants_usbguard:tst:1  true

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service

systemd test  oval:ssg-test_multi_user_wants_usbguard_socket:tst:1  false

Following items have been found on the system:
UnitDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependencyDependency
multi-user.targetbasic.target-.mountvar.mountsysinit.targetsystemd-firstboot.servicesys-kernel-debug.mountnis-domainname.serviceswap.targetdev-disk-by\x2duuid-1ab6aa65\x2d2a18\x2d445d\x2d9485\x2d64f4d24f6f0d.swapcryptsetup.targetclevis-luks-askpass.pathsystemd-network-generator.servicesystemd-tmpfiles-setup-dev.serviceintegritysetup.targetsystemd-tmpfiles-setup.servicesystemd-modules-load.servicesystemd-journald.servicesystemd-random-seed.servicesystemd-sysusers.servicesystemd-udev-trigger.serviceldconfig.servicesystemd-pcrphase-sysinit.serviceveritysetup.targetlvm2-monitor.servicesystemd-sysctl.servicesystemd-udevd.servicedev-mqueue.mountsystemd-update-done.servicesystemd-ask-password-console.pathselinux-autorelabel-mark.servicesys-kernel-tracing.mountlvm2-lvmpolld.socketsystemd-journal-flush.servicesys-fs-fuse-connections.mountsystemd-repart.servicesystemd-pcrphase.servicedev-hugepages.mountkmod-static-nodes.serviceproc-sys-fs-binfmt_misc.automountdracut-shutdown.servicesystemd-machine-id-commit.servicesystemd-update-utmp.servicesystemd-binfmt.servicesystemd-hwdb-update.servicelocal-fs.targetostree-remount.serviceboot.mountsystemd-remount-fs.servicesystemd-journal-catalog-update.servicesystemd-boot-system-token.servicesys-kernel-config.mountsystemd-boot-update.serviceslices.targetsystem.slice-.sliceusbguard.servicesockets.targetdm-event.socketsystemd-journald.socketpcscd.socketsystemd-udevd-kernel.socketsystemd-journald-dev-log.socketsystemd-initctl.socketsystemd-coredump.socketsystemd-udevd-control.socketdbus.socketignition-firstboot-complete.servicetimers.targetsystemd-tmpfiles-clean.timerunbound-anchor.timermicrocode.servicepaths.targetsystemd-ask-password-wall.pathremote-fs.targetrsyslog.servicechronyd.serviceostree-finalize-staged.pathsystemd-update-utmp-runlevel.servicesystemd-user-sessions.servicerhsmcertd.servicefirewalld.serviceostree-boot-complete.serviceauditd.servicerngd.servicecoreos-ignition-write-issues.serviceModemManager.servicemdmonitor.servicegreenboot-status.servicesshd.servicefdo-client-linuxapp.servicesystemd-logind.serviceostree-readonly-sysroot-migration.servicefapolicyd.serviceNetworkManager.servicegreenboot-healthcheck.servicegreenboot-task-runner.servicegetty.targetgetty@tty1.servicegreenboot-grub2-set-success.service
Log USBGuard daemon audit events using Linux Auditxccdf_org.ssgproject.content_rule_configure_usbguard_auditbackend lowCCE-84206-2

Log USBGuard daemon audit events using Linux Audit

Rule IDxccdf_org.ssgproject.content_rule_configure_usbguard_auditbackend
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-configure_usbguard_auditbackend:def:1
Time2024-01-08T16:20:43+00:00
Severitylow
Identifiers and References

Identifiers:  CCE-84206-2

References:  CCI-000169, CCI-000172, AU-2, CM-8(3), IA-3, FMT_SMF_EXT.1, SRG-OS-000062-GPOS-00031, SRG-OS-000471-GPOS-00215, SRG-APP-000141-CTR-000315, RHEL-09-291025, SV-258037r926098_rule

Description
To configure USBGuard daemon to log via Linux Audit (as opposed directly to a file), AuditBackend option in /etc/usbguard/usbguard-daemon.conf needs to be set to LinuxAudit.
Rationale
Using the Linux Audit logging allows for centralized trace of events.

Complexity:low
Disruption:low
Reboot:false
Strategy:restrict
# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && ! grep -q s390x /proc/sys/kernel/osrelease ) && { rpm --quiet -q usbguard; }; then

if [ -e "/etc/usbguard/usbguard-daemon.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*AuditBackend=/d" "/etc/usbguard/usbguard-daemon.conf"
else
    touch "/etc/usbguard/usbguard-daemon.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/usbguard/usbguard-daemon.conf"

cp "/etc/usbguard/usbguard-daemon.conf" "/etc/usbguard/usbguard-daemon.conf.bak"
# Insert at the end of the file
printf '%s\n' "AuditBackend=LinuxAudit" >> "/etc/usbguard/usbguard-daemon.conf"
# Clean up after ourselves.
rm "/etc/usbguard/usbguard-daemon.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  annotations:
    complianceascode.io/depends-on: xccdf_org.ssgproject.content_rule_package_usbguard_installed
    complianceascode.io/ocp-version: '>=4.7.0'
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ %0A%23%0A%23%20Rule%20set%20file%20path.%0A%23%0A%23%20The%20USBGuard%20daemon%20will%20use%20this%20file%20to%20load%20the%20policy%0A%23%20rule%20set%20from%20it%20and%20to%20write%20new%20rules%20received%20via%20the%0A%23%20IPC%20interface.%0A%23%0A%23%20RuleFile%3D/path/to/rules.conf%0A%23%0ARuleFile%3D/etc/usbguard/rules.conf%0A%0A%23%0A%23%20Rule%20set%20folder%20path.%0A%23%0A%23%20The%20USBGuard%20daemon%20will%20use%20this%20folder%20to%20load%20the%20policy%0A%23%20rule%20set%20from%20it%20and%20to%20write%20new%20rules%20received%20via%20the%0A%23%20IPC%20interface.%20Usually%2C%20we%20set%20the%20option%20to%0A%23%20/etc/usbguard/rules.d/.%20The%20USBGuard%20daemon%20is%20supposed%20to%0A%23%20behave%20like%20any%20other%20standard%20Linux%20daemon%20therefore%20it%0A%23%20loads%20rule%20files%20in%20alpha-numeric%20order.%20File%20names%20inside%0A%23%20RuleFolder%20directory%20should%20start%20with%20a%20two-digit%20number%0A%23%20prefix%20indicating%20the%20position%2C%20in%20which%20the%20rules%20are%0A%23%20scanned%20by%20the%20daemon.%0A%23%0A%23%20RuleFolder%3D/path/to/rulesfolder/%0A%23%0ARuleFolder%3D/etc/usbguard/rules.d/%0A%0A%23%0A%23%20Implicit%20policy%20target.%0A%23%0A%23%20How%20to%20treat%20devices%20that%20don%27t%20match%20any%20rule%20in%20the%0A%23%20policy.%20One%20of%3A%0A%23%0A%23%20%2A%20allow%20%20-%20authorize%20the%20device%0A%23%20%2A%20block%20%20-%20block%20the%20device%0A%23%20%2A%20reject%20-%20remove%20the%20device%0A%23%0AImplicitPolicyTarget%3Dblock%0A%0A%23%0A%23%20Present%20device%20policy.%0A%23%0A%23%20How%20to%20treat%20devices%20that%20are%20already%20connected%20when%20the%0A%23%20daemon%20starts.%20One%20of%3A%0A%23%0A%23%20%2A%20allow%20%20%20%20%20%20%20%20-%20authorize%20every%20present%20device%0A%23%20%2A%20block%20%20%20%20%20%20%20%20-%20deauthorize%20every%20present%20device%0A%23%20%2A%20reject%20%20%20%20%20%20%20-%20remove%20every%20present%20device%0A%23%20%2A%20keep%20%20%20%20%20%20%20%20%20-%20just%20sync%20the%20internal%20state%20and%20leave%20it%0A%23%20%2A%20apply-policy%20-%20evaluate%20the%20ruleset%20for%20every%20present%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20device%0A%23%0APresentDevicePolicy%3Dapply-policy%0A%0A%23%0A%23%20Present%20controller%20policy.%0A%23%0A%23%20How%20to%20treat%20USB%20controllers%20that%20are%20already%20connected%0A%23%20when%20the%20daemon%20starts.%20One%20of%3A%0A%23%0A%23%20%2A%20allow%20%20%20%20%20%20%20%20-%20authorize%20every%20present%20device%0A%23%20%2A%20block%20%20%20%20%20%20%20%20-%20deauthorize%20every%20present%20device%0A%23%20%2A%20reject%20%20%20%20%20%20%20-%20remove%20every%20present%20device%0A%23%20%2A%20keep%20%20%20%20%20%20%20%20%20-%20just%20sync%20the%20internal%20state%20and%20leave%20it%0A%23%20%2A%20apply-policy%20-%20evaluate%20the%20ruleset%20for%20every%20present%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20device%0A%23%0APresentControllerPolicy%3Dkeep%0A%0A%23%0A%23%20Inserted%20device%20policy.%0A%23%0A%23%20How%20to%20treat%20USB%20devices%20that%20are%20already%20connected%0A%23%20%2Aafter%2A%20the%20daemon%20starts.%20One%20of%3A%0A%23%0A%23%20%2A%20block%20%20%20%20%20%20%20%20-%20deauthorize%20every%20present%20device%0A%23%20%2A%20reject%20%20%20%20%20%20%20-%20remove%20every%20present%20device%0A%23%20%2A%20apply-policy%20-%20evaluate%20the%20ruleset%20for%20every%20present%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20device%0A%23%0AInsertedDevicePolicy%3Dapply-policy%0A%0A%23%0A%23%20Control%20which%20devices%20are%20authorized%20by%20default.%0A%23%0A%23%20The%20USBGuard%20daemon%20modifies%20some%20the%20default%20authorization%20state%20attributes%0A%23%20of%20controller%20devices.%20This%20setting%2C%20enables%20you%20to%20define%20what%20value%20the%0A%23%20default%20authorization%20is%20set%20to.%0A%23%0A%23%20%2A%20keep%20%20%20%20%20%20%20%20%20-%20do%20not%20change%20the%20authorization%20state%0A%23%20%2A%20none%20%20%20%20%20%20%20%20%20-%20every%20new%20device%20starts%20out%20deauthorized%0A%23%20%2A%20all%20%20%20%20%20%20%20%20%20%20-%20every%20new%20device%20starts%20out%20authorized%0A%23%20%2A%20internal%20%20%20%20%20-%20internal%20devices%20start%20out%20authorized%2C%20external%20devices%20start%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20out%20deauthorized%20%28this%20requires%20the%20ACPI%20tables%20to%20properly%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20label%20internal%20devices%2C%20and%20kernel%20support%29%0A%23%0A%23AuthorizedDefault%3Dnone%0A%0A%23%0A%23%20Restore%20controller%20device%20state.%0A%23%0A%23%20The%20USBGuard%20daemon%20modifies%20some%20attributes%20of%20controller%0A%23%20devices%20like%20the%20default%20authorization%20state%20of%20new%20child%20device%0A%23%20instances.%20Using%20this%20setting%2C%20you%20can%20control%20whether%20the%0A%23%20daemon%20will%20try%20to%20restore%20the%20attribute%20values%20to%20the%20state%0A%23%20before%20modification%20on%20shutdown.%0A%23%0A%23%20SECURITY%20CONSIDERATIONS%3A%20If%20set%20to%20true%2C%20the%20USB%20authorization%0A%23%20policy%20could%20be%20bypassed%20by%20performing%20some%20sort%20of%20attack%20on%20the%0A%23%20daemon%20%28via%20a%20local%20exploit%20or%20via%20a%20USB%20device%29%20to%20make%20it%20shutdown%0A%23%20and%20restore%20to%20the%20operating-system%20default%20state%20%28known%20to%20be%20permissive%29.%0A%23%0ARestoreControllerDeviceState%3Dfalse%0A%0A%23%0A%23%20Device%20manager%20backend%0A%23%0A%23%20Which%20device%20manager%20backend%20implementation%20to%20use.%20One%20of%3A%0A%23%0A%23%20%2A%20uevent%20%20%20-%20Netlink%20based%20implementation%20which%20uses%20sysfs%20to%20scan%20for%20present%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20devices%20and%20an%20uevent%20netlink%20socket%20for%20receiving%20USB%20device%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20related%20events.%0A%23%20%2A%20umockdev%20-%20umockdev%20based%20device%20manager%20capable%20of%20simulating%20devices%20based%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20on%20umockdev-record%20files.%20Useful%20for%20testing.%0A%23%0ADeviceManagerBackend%3Duevent%0A%0A%23%21%21%21%20WARNING%3A%20It%27s%20good%20practice%20to%20set%20at%20least%20one%20of%20the%20%21%21%21%0A%23%21%21%21%20%20%20%20%20%20%20%20%20%20two%20options%20bellow.%20If%20none%20of%20them%20are%20set%2C%20%20%21%21%21%0A%23%21%21%21%20%20%20%20%20%20%20%20%20%20the%20daemon%20will%20accept%20IPC%20connections%20from%20%20%20%21%21%21%0A%23%21%21%21%20%20%20%20%20%20%20%20%20%20anyone%2C%20thus%20allowing%20anyone%20to%20modify%20the%20%20%20%20%21%21%21%0A%23%21%21%21%20%20%20%20%20%20%20%20%20%20rule%20set%20and%20%28de%29authorize%20USB%20devices.%20%20%20%20%20%20%20%21%21%21%0A%0A%23%0A%23%20Users%20allowed%20to%20use%20the%20IPC%20interface.%0A%23%0A%23%20A%20space%20delimited%20list%20of%20usernames%20that%20the%20daemon%20will%0A%23%20accept%20IPC%20connections%20from.%0A%23%0A%23%20IPCAllowedUsers%3Dusername1%20username2%20...%0A%23%0AIPCAllowedUsers%3Droot%0A%0A%23%0A%23%20Groups%20allowed%20to%20use%20the%20IPC%20interface.%0A%23%0A%23%20A%20space%20delimited%20list%20of%20groupnames%20that%20the%20daemon%20will%0A%23%20accept%20IPC%20connections%20from.%0A%23%0A%23%20IPCAllowedGroups%3Dgroupname1%20groupname2%20...%0A%23%0AIPCAllowedGroups%3Dwheel%0A%0A%23%0A%23%20IPC%20access%20control%20definition%20files%20path.%0A%23%0A%23%20The%20files%20at%20this%20location%20will%20be%20interpreted%20by%20the%20daemon%0A%23%20as%20access%20control%20definition%20files.%20The%20%28base%29name%20of%20a%20file%0A%23%20should%20be%20in%20the%20form%3A%0A%23%0A%23%20%20%20%5Buser%5D%5B%3A%3Cgroup%3E%5D%0A%23%0A%23%20and%20should%20contain%20lines%20in%20the%20form%3A%0A%23%0A%23%20%20%20%3Csection%3E%3D%5Bprivilege%5D%20...%0A%23%0A%23%20This%20way%20each%20file%20defines%20who%20is%20able%20to%20connect%20to%20the%20IPC%0A%23%20bus%20and%20what%20privileges%20he%20has.%0A%23%0AIPCAccessControlFiles%3D/etc/usbguard/IPCAccessControl.d/%0A%0A%23%0A%23%20Generate%20device%20specific%20rules%20including%20the%20%22via-port%22%0A%23%20attribute.%0A%23%0A%23%20This%20option%20modifies%20the%20behavior%20of%20the%20allowDevice%0A%23%20action.%20When%20instructed%20to%20generate%20a%20permanent%20rule%2C%0A%23%20the%20action%20can%20generate%20a%20port%20specific%20rule.%20Because%0A%23%20some%20systems%20have%20unstable%20port%20numbering%2C%20the%20generated%0A%23%20rule%20might%20not%20match%20the%20device%20after%20rebooting%20the%20system.%0A%23%0A%23%20If%20set%20to%20false%2C%20the%20generated%20rule%20will%20still%20contain%0A%23%20the%20%22parent-hash%22%20attribute%20which%20also%20defines%20an%20association%0A%23%20to%20the%20parent%20device.%20See%20usbguard-rules.conf%285%29%20for%20more%0A%23%20details.%0A%23%0ADeviceRulesWithPort%3Dfalse%0A%0A%23%0A%23%20USBGuard%20Audit%20events%20log%20backend%0A%23%0A%23%20One%20of%3A%0A%23%0A%23%20%2A%20FileAudit%20-%20Log%20audit%20events%20into%20a%20file%20specified%20by%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20AuditFilePath%20setting%20%28see%20below%29%0A%23%20%2A%20LinuxAudit%20-%20Log%20audit%20events%20using%20the%20Linux%20Audit%0A%23%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20subsystem%20%28using%20audit_log_user_message%29%0A%23%0AAuditBackend%3DLinuxAudit%0A%0A%23%0A%23%20USBGuard%20audit%20events%20log%20file%20path.%0A%23%0A%23AuditFilePath%3D/var/log/usbguard/usbguard-audit.log%0A%0A%23%0A%23%20Hides%20personally%20identifiable%20information%20such%20as%20device%20serial%20numbers%20and%0A%23%20hashes%20of%20descriptors%20%28which%20include%20the%20serial%20number%29%20from%20audit%20entries.%0A%23%0A%23HidePII%3Dfalse }}
        mode: 0600
        path: /etc/usbguard/usbguard-daemon.conf
        overwrite: true
OVAL test results details

tests the value of AuditBackend setting in the /etc/usbguard/usbguard-daemon.conf file  oval:ssg-test_configure_usbguard_auditbackend:tst:1  false

Following items have been found on the system:
PathContent
/etc/usbguard/usbguard-daemon.confAuditBackend=FileAudit

The configuration file /etc/usbguard/usbguard-daemon.conf exists for configure_usbguard_auditbackend  oval:ssg-test_configure_usbguard_auditbackend_config_file_exists:tst:1  true

Following items have been found on the system:
PathTypeUIDGIDSize (B)Permissions
/etc/usbguard/usbguard-daemon.confregular006418rw------- 
Generate USBGuard Policyxccdf_org.ssgproject.content_rule_usbguard_generate_policy mediumCCE-88882-6

Generate USBGuard Policy

Rule IDxccdf_org.ssgproject.content_rule_usbguard_generate_policy
Result
fail
Multi-check ruleno
OVAL Definition IDoval:ssg-usbguard_generate_policy:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-88882-6

References:  A.23.SEC-RHEL1, CCI-000416, CCI-001958, CM-8(3)(a), IA-3, FMT_SMF_EXT.1, SRG-OS-000378-GPOS-00163, RHEL-09-291030, SV-258038r926101_rule

Description
By default USBGuard when enabled prevents access to all USB devices and this lead to inaccessible system if they use USB mouse/keyboard. To prevent this scenario, the initial policy configuration must be generated based on current connected USB devices.
Rationale
The usbguard must be configured to allow connected USB devices to work properly, avoiding the system to become inaccessible.

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && ! grep -q s390x /proc/sys/kernel/osrelease ); then

if rpm --quiet -q usbguard
then
    USBGUARD_CONF=/etc/usbguard/rules.conf
    if [ ! -f "$USBGUARD_CONF" ] || [ ! -s "$USBGUARD_CONF" ]; then
        usbguard generate-policy > $USBGUARD_CONF
        if [ ! -s "$USBGUARD_CONF" ]; then
            # make sure OVAL check doesn't fail on systems where
            # generate-policy doesn't find any USB devices (for
            # example a system might not have a USB bus)
            echo "# No USB devices found" > $USBGUARD_CONF
        fi
        # make sure it has correct permissions
        chmod 600 $USBGUARD_CONF

        SYSTEMCTL_EXEC='/usr/bin/systemctl'
        "$SYSTEMCTL_EXEC" unmask 'usbguard.service'
        "$SYSTEMCTL_EXEC" restart 'usbguard.service'
        "$SYSTEMCTL_EXEC" enable 'usbguard.service'
    fi
else
    echo "USBGuard is not installed. No remediation was applied!"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:false
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-88882-6
  - DISA-STIG-RHEL-09-291030
  - NIST-800-53-CM-8(3)(a)
  - NIST-800-53-IA-3
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - usbguard_generate_policy

- name: Generate USBGuard Policy
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Check that the /etc/usbguard/rules.conf exists
    stat:
      path: /etc/usbguard/rules.conf
    register: policy_file

  - name: Create USBGuard Policy configuration
    command: usbguard generate-policy
    register: policy
    when: not policy_file.stat.exists or policy_file.stat.size == 0

  - name: Copy the Generated Policy configuration to a persistent file
    copy:
      content: '{{ policy.stdout }}'
      dest: /etc/usbguard/rules.conf
      mode: 384
    when: not policy_file.stat.exists or policy_file.stat.size == 0

  - name: Add comment into /etc/usbguard/rules.conf when system has no USB devices
    lineinfile:
      path: /etc/usbguard/rules.conf
      line: '# No USB devices found'
      state: present
    when: not policy_file.stat.exists or policy_file.stat.size == 0

  - name: Enable service usbguard
    systemd:
      name: usbguard
      enabled: 'yes'
      state: started
      masked: 'no'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and ansible_architecture != "s390x" )
  - '"usbguard" in ansible_facts.packages'
  tags:
  - CCE-88882-6
  - DISA-STIG-RHEL-09-291030
  - NIST-800-53-CM-8(3)(a)
  - NIST-800-53-IA-3
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - usbguard_generate_policy
OVAL test results details

Check the usbguard rules in either /etc/usbguard/rules.conf or /etc/usbguard/rules.d/ contain at least one non whitespace character and exists  oval:ssg-test_usbguard_rules_nonempty:tst:1  false

No items have been found conforming to the following objects:
Object oval:ssg-obj_usbguard_rules_nonempty:obj:1 of type textfilecontent54_object
FilepathPatternInstance
^/etc/usbguard/(rules|rules\.d/.*)\.conf$^.*\S+.*$1
Disable graphical user interfacexccdf_org.ssgproject.content_rule_xwindows_remove_packages mediumCCE-84106-4

Disable graphical user interface

Rule IDxccdf_org.ssgproject.content_rule_xwindows_remove_packages
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-xwindows_remove_packages:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84106-4

References:  CCI-000366, CM-6(b), SRG-OS-000480-GPOS-00227, RHEL-09-215070, SV-257837r925498_rule

Description
By removing the following packages, the system no longer has X Windows installed. xorg-x11-server-Xorg xorg-x11-server-common xorg-x11-server-utils xorg-x11-server-Xwayland If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:
sudo dnf remove xorg-x11-server-Xorg xorg-x11-server-common xorg-x11-server-utils xorg-x11-server-Xwayland
Rationale
Unnecessary service packages must not be installed to decrease the attack surface of the system. X windows has a long history of security vulnerabilities and should not be installed unless approved and documented.
Warnings
warning  The installation and use of a Graphical User Interface (GUI) increases your attack vector and decreases your overall security posture. Removing the package xorg-x11-server-common package will remove the graphical target which might bring your system to an inconsistent state requiring additional configuration to access the system again. The rule xwindows_runlevel_target can be used to configure the system to boot into the multi-user.target. If a GUI is an operational requirement, a tailored profile that removes this rule should be used before continuing installation.
OVAL test results details

package xorg-x11-server-Xorg is removed  oval:ssg-package_xorg-x11-server-Xorg_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_package_xorg-x11-server-Xorg_removed:obj:1 of type rpminfo_object
Name
xorg-x11-server-Xorg

package xorg-x11-server-common is removed  oval:ssg-test_package_xorg-x11-server-common_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_test_package_xorg-x11-server-common_removed:obj:1 of type rpminfo_object
Name
xorg-x11-server-common

package xorg-x11-server-utils is removed  oval:ssg-package_xorg-x11-server-utils_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_package_xorg-x11-server-utils_removed:obj:1 of type rpminfo_object
Name
xorg-x11-server-utils

package xorg-x11-server-Xwayland is removed  oval:ssg-package_xorg-x11-server-Xwayland_removed:tst:1  true

No items have been found conforming to the following objects:
Object oval:ssg-obj_package_xorg-x11-server-Xwayland_removed:obj:1 of type rpminfo_object
Name
xorg-x11-server-Xwayland
Disable X Windows Startup By Setting Default Targetxccdf_org.ssgproject.content_rule_xwindows_runlevel_target mediumCCE-84105-6

Disable X Windows Startup By Setting Default Target

Rule IDxccdf_org.ssgproject.content_rule_xwindows_runlevel_target
Result
pass
Multi-check ruleno
OVAL Definition IDoval:ssg-xwindows_runlevel_target:def:1
Time2024-01-08T16:20:43+00:00
Severitymedium
Identifiers and References

Identifiers:  CCE-84105-6

References:  12, 15, 8, APO13.01, DSS01.04, DSS05.02, DSS05.03, CCI-000366, 4.3.3.6.6, SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.PT-4, SRG-OS-000480-GPOS-00227, RHEL-09-211030, SV-257781r925330_rule

Description
Systems that do not require a graphical user interface should only boot by default into multi-user.target mode. This prevents accidental booting of the system into a graphical.target mode. Setting the system's default target to multi-user.target will prevent automatic startup of the X server. To do so, run:
$ systemctl set-default multi-user.target
You should see the following output:
Removed symlink /etc/systemd/system/default.target.
Created symlink from /etc/systemd/system/default.target to /usr/lib/systemd/system/multi-user.target.
Rationale
Services that are not required for system and application processes must not be active to decrease the attack surface of the system. X windows has a long history of security vulnerabilities and should not be used unless approved and documented.
OVAL test results details

default.target systemd softlink exists  oval:ssg-test_disable_xwindows_runlevel_target:tst:1  true

Following items have been found on the system:
FilepathCanonical path
/etc/systemd/system/default.target/usr/lib/systemd/system/multi-user.target
Scroll back to the first rule
Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.